I am trying to forward a port so i can connect to my computer because i want to stream a radio station from computer to my phone.I'm trying to forward port 88 on my Linksys WRT54G Version 6.I tried that but Boardwave audio streaming server still says it's not open!Here are some pictures: I'm using Windows XP Professional 32-Bit
Eset AntiVirus
and using Windows firewall
I encounter a problem setting up port 80 forwarding on WRT54g router.
Configuration:
- Numericable modem
- WRT54G router : portforwarding configured, accepting anonymous internet traffic, no DMZ, no port-triggering... in fact everything is fine except for ports 80/443
- Linux Ubuntu server + Apache2 listening *:80 and/or *:15001
1/ Situation 1: Apache listening on server's *:15001
-> Accessing from Internet (outside LAN) works very fine.
-> Portforwarding of router:15001 to server:15001 (TCP) works fine.
2/ Situation 2: Apache listening on server *:80
-> Accessing from Internet (outside LAN) FAILS.
-> Portforwarding of router:80 to server:80 (TCP) doesn't work. Diagnostic using the client machine's firewall tool showed the request doesn't get any return... no traffic back at all.
The system being fully operational when using port:15001 shows the problem does not come from server configuration.I still have to try a bypass of my router by plugging the modem directly on the server eth card.
-> If that works it would definitely prove the problem comes from the router, precisely the portforwarding feature as applied to port:80.
My guess is the following:
- As WRT54g router's remote administration interface is precisely set to listen 80/443 ports.
- As I still did not disable remote administration as I need it, but I will come to such extremities (very soon in fact as despair is gaining me
- Looks like WRT54g is unable to forward port 80 as this is it's remote administration port. You can set it up, but it just won't work, and there's no warning
Solutions?
- Disable remote administration? (will it work ? cause I would not risk to disable it for nothing...)
- Have remote administration litening on different ports than 80/443?
- Is my diagnostic correct ? (at least, does it seems to be...)
- (shall I get another device? Update to alternative firmware project?)
PS : I could be asked for ifconfig/netstats/hdw-fmw version, I would post later as I do not have access now.Looks like to me it is recurrent issue on WRT54g (maybe I'm wrong and just an **bleep** in LAN/WAN configuration which is highly possible)
DIR-601, Hardware Version : B1, Firmware Version : 2.00NA.Trying to open up port for RDP (3389) to WinXP machine (tried with DHCP and with static IP on XP workstation)Tried both Virtual Server (3389 to 3389 and other port numbers to 3389) and a simple Port Forwarding (3389 TCP). Both methods work correctly for about 15 or 20 minutes, then the router blocks traffic on the opened ports.If I delete the virtual server/port forward settings and recreate it will again work for about 15 or 20 minutes.Even tried creating my own schedule (although I would be quite happy with always)
Also can't find a link for the 2.00NA firmware to attemp a reflash, I have only be able to find firmware for the HWverA unit. (other than the wrt stuff, is there any other firmware for the B1 unit?
So I bought the WUSB54GC wireless adapter today. My computer's OS is Windows XP Professional. Whenever I load the disk and click "Start Setup" a window pops up that says "This version of Windows in not supported."
View 9 Replies View RelatedI have tried installing this device on Windows 7 64bit machine. The install seems to go fine and the device works at 2.4G.
But I purchased this unit to be able to test a clients 5GHz system. There does not seem to be any place to switch from 2.4G to 5.0G.
I cant install drivers for Windovs XP both 32-64 Professional. Original CD tells me for x64 OS is not supported, also, when trying to install only drivers it just can't find it. For x32 same problem - can't install drivers. I've got Intel DP45SG.
View 5 Replies View RelatedI have 2 AE1000 USB adapters and according to the Linksys website these are wirelessN dual band selectable adapters. I finally hooked up my new e4200 dual band router and the ae1000 connect but I don't see anywhere on the screen in windows 7 ultimate 32bit that you can change the band?
View 1 Replies View RelatedIs it possible to create a service which will forward public port 9010 to an internal IP address with port 23?First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80?
View 1 Replies View RelatedEach time I try to add a new route(route add 172.24.0.0 mask 255.255.0.0 172.21.0.4). I get the following error message: The requested operation requires elevation.
View 1 Replies View RelatedI have an older router, Linksys WRT54G, how crappy is this?. How much better speed/connection can I get from a new router? . If you have any suggestions for routers under $100 that would be a big upgrade from this please post it.
View 3 Replies View RelatedMy win xp pro 32bit cannot add network printer kxp1121 from win 7 64 bit which is using epson lx series 1 (80). Request driver ' unknown Inf'
View 1 Replies View RelatedI wan to access a folder shared on windows 2003 server 32bit from a Windows 7 64bit ultimate WS. but after asking password, beside giving correct password, it asks again and agian and do not show folder
View 1 Replies View RelatedI just recently updated my firmware on my linksys router WRT54G with the new version of linksys firm ware and now my router does not work. I can not access the GUI under the ip address 192.168.1.1. I 've tried to reboot the router using the 30/30 method that is suggested by Linksys, but I still can not access the routers GUI.
View 2 Replies View RelatedI'm having trouble connecting my PS3 to the internet. I'm too far away from my wifi router and can't get a good signal strength. I do have an ethernet cable from my pc, but apparently it only works in my pc and not on my PS3. It keeps saying: no ethernet cable connected. I've searched fora, but apparently this can be caused by a lot of things, and I dont really find a solution :s. The problem is, it has worked before, and now it doesn't. Also, ethernet on my ps3 works perfectly at my buddy's house.
I have a linksys wrt54g version 7. I installed the router myself, but if my wired connection to my pc works, and the wireless connection works for the laptop, there shouldn't be any problem I guess?Perhaps, could the laptop -which is on the router's wifi and which is halfway in between my router and my PS3 in distance- act as a wifi amplifier to my PS3? That way, the ps3 could pick up the signal from the laptop, instead of all the way from the router?
I need to reflash a WRT54G version 2, but on the support page I can not find any firmware. Only for version 2.2. is it the compatible also with version 2?
View 2 Replies View RelatedIs there a driver available yet for the External Dell Wireless card (model number D1450U) yet on Microsoft Windows XP Professional x64? I guess the better question is if there is a 64bit driver available for the external card yet?
View 5 Replies View RelatedI cannot connect to the internet via the wireless network from my router. Currently, I can connect to the wireless network, however I cannot access the internet, but I am able to access the internet with an Ethernet cable in the same router.This is a fairly recent development as we have used this router for wireless internet access (our modem has a wireless network built into it, but it is unreliable) for upwards of 8 months now without problem. One day it simple restored itself to the default name and we were no longer able to access the internet through the wireless portion.
Router: WRT54G Version 6.0
This is an older desktop, Been utilizing the net gear to get on the Internet for months and it was working fine,shows it is connected to ssid but ip shows up as 0.0.0.0 I have other home computers hooked up and work g so I located there ip address, can I input it myself ? If so how?
View 2 Replies View RelatedI was recently given a computer from my workplace. I took this computer home, and put it in the place of my old one. The internet connection on my old computer has always been fine; all cables are connected correctly. However, this computer from work will not connect to the internet. The icon in the bottom right corner of the screen states that I am connected, but the internet browser claims that it is unable to display web pages. May the cause of this be related to any unique computer settings that a workplace may have on a computer in their network? Other computers have no problem connecting to the internet through the same, wired connection. The OS is Windows XP Professional.
View 2 Replies View RelatedI'm having a wierd issue with the VPN client installed on Windows. Eventhough it connects and receive and IP address, I'm not able to access any of the servers on the remote network.
Is there any special configuration need it for it to work on Windows 7 proffesional?
The client works perfect with windows XP, we have a ASA 5510 Version 8.2(2) is in routed Mode
We were hit by hurricane Sandy a couple weeks ago and lost power for a week and a half. Now that our cable has been restored I noticed that the wireless internet wasn't working. The wired internet works fine to this computer but no Wi-fi.I think the problem is the routers default gateway. It's supposed to be 192.168.1.1 but right now it's 24.191.112.1 .So far I have tried:
-Powercycling everything
-ipconfig/ flush DNS
-ipconfig/ release and ipconfig/renew
-Checking all the wires are pugged in fine (They are).
I have a EMEA wireless router WRT54G v7 with Firmware Version: v7.00.7 Beta. I can't seem to find an update for the firmware on the site.
View 2 Replies View RelatedI have unchecked 'Block Anonymous Internet Requests” but then also I am not able to forward ports like 80 and port 443.
View 1 Replies View RelatedI Just bought this Linksys Modem/Router and i still can´t believe that my cheap dlink DIR600 or my OLD SAGEMCOM can set IP to all my machines but this WAG120N cant!and Worse, how will i set port forward if i don't know which IP the machine will get?is there any firmware or MAGIC ??
View 4 Replies View Relatedwe are using Cisco VPN client to access our corporate network.I have 5 new notebooks Dell Latitude E6410 OS Windows 7 Professional x64, with identical hardware configuration.I downloaded Cisco VPN Client 5.0.07.440 (64 bit) and installed it on all notebooks. It works fine on 3 notebooks, while on 2 notebooks the VPN connection fails with error:
Secure VPN collection terminated locally by the client.
Reason 403: Unable to contact the security gateway
We use a smartcard for VPN access (etoken from Aladdin)
Here an extract from Cisco log:
Cisco Systems VPN Client Version 5.0.07.0440Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.Client Type(s): Windows, WinNTRunning on: 6.1.7600...Sev=Info/6 CERT/0x63600026 Attempting to find a Certificate using Serial Hash....Sev=Info/6 CERT/0x63600027 Found a Certificate using Serial Hash....Sev=Info/6 CERT/0x63600026 Attempting to find a Certificate using Serial Hash....Sev=Info/6 CERT/0x63600027 Found a Certificate using Serial Hash....Sev=Info/6 CERT/0x63600026 Attempting to find a Certificate using Serial Hash....Sev=Info/6 CERT/0x63600027 Found a Certificate using Serial Hash....Sev=Info/4 CERT/0x63600015 Cert (cn=<omissis>,ou=Remote,ou=Users,ou=<omissis>,dc=it,dc=<omissis>,dc=local) verification succeeded....Sev=Info/4 CM/0x63100002 Begin connection process...Sev=Info/4 CM/0x63100004 Establish secure connection...Sev=Info/4
[code]......
It seems the problem is in the certificate, but I verified and Cisco client says it's ok. It's also the only valid certificate in MMC->Certificates->Personal.Furthermore, also using other smartcard (etokens) of other users it doesn't work.
I have my router set up and life was good. i now want to forward a port. i go into apllications/gaming put the application name, the port i want to forward and click enable. Save changes and i get a changes save message. When the browser goes back to the applications/gaming screen no port shows as being forwarded. If i go to canyouseemenow.org the port shows as being closed.
View 3 Replies View RelatedWindows 7 64 bit / Linksys EA3500 / (2) FosCam F18910W IP Camera’s I just installed a new EA3500. (Should I have purchased the 4500)?I need to set up port forwarding to enable wireless use of the IP cams with my iPhone. I had this all set using my former router, but it died.how to to port forward this Linksys EA3500?
View 2 Replies View Relatedi Have a router called Linksys BEFSR41v3 i need to port forward a port but it just wont open i loggerd in on my router using 192.168.1.1 after i click applications & gaming started the port on 100 and ended on 100 used ipconfig in cmd to find me ipv4 adres and putted in ip adress box also both protocol are on and i clicked the enabled function also i tried also got a static ip i used canyouseeme.org to cheak if my port is open it still says its not open.
View 9 Replies View RelatedHaving a devil of a time trying to forward a port on my router. Did everything instructions said, but it still doesn't work. What can I do.
View 2 Replies View Relatedi need the driver of dsl 2640u for windows 7 32bit
View 2 Replies View RelatedI attached an Iomego Home Media network hard drive to my Linksys E3000 router (via ethernet cable). Before setting up the remote access on the Iomega, I forwarded the ports that it wanted (443 and 21) to the static IP of the Iomega. I checked to see that they were open using yougetsignal.com and they were both open. After setting up the remote access on the Iomega, the 443 port closed and I cant even get into the "manage storage device" page for the Iomega. Iomega uses TZo for the domain names. They tell me that the association is made between the name and my public IP address. My router is out of warranty since Sept, so Linksys wont give me the time of day. I contacted my ISP and while they block a couple of ports, 443 is not one of them.I've installed the latest firmware (1.0.04 - Build 6). Reset and rebooted numerous times, Port 443 remains closed.
View 8 Replies View RelatedI have a westell 7500 with fairpoint service hooked up to my DSL line. I have disabled woreless on the westell. I then have a linksys e-1000 connected to the westell 7500. I have one wired computer on that network, my imac/game server, my main PC, my wii and an ipod touch connected connected to the linksys e-1000 wirelessly. I want to forward port 25565 through these routers to my imac. How can I do this? I have tried portforward.com, and a million other things.
View 2 Replies View RelatedSome routers are able to forward to broadcast directly by sending a port to 192.168.1.255, other's I've been able to trick by forwarding to 192.168.1.254 and then editing the arp table with 192.168.1.254 <-> ff:ff:ff:ff:ff:ff. Is there any way I can edit the arp table of the E4200? Is there a way to telnet in or get a console connection?
View 9 Replies View Related