I cant install drivers for Windovs XP both 32-64 Professional. Original CD tells me for x64 OS is not supported, also, when trying to install only drivers it just can't find it. For x32 same problem - can't install drivers. I've got Intel DP45SG.
View 5 RepliesI have tried installing this device on Windows 7 64bit machine. The install seems to go fine and the device works at 2.4G.
But I purchased this unit to be able to test a clients 5GHz system. There does not seem to be any place to switch from 2.4G to 5.0G.
So I bought the WUSB54GC wireless adapter today. My computer's OS is Windows XP Professional. Whenever I load the disk and click "Start Setup" a window pops up that says "This version of Windows in not supported."
View 9 Replies View RelatedWhenever I try to install the drivers for the adapter normally, Windows 7x64 gives me a message that the device name "Compact Wireless-G USB Network Adapter" already exists and is in use, preventing me from installing the wireless driver properly. In order to get around it, I changed all "Compact Wireless-G USB Network Adapter" fields into "Compact Wireless-G USB Network Adapter B" in the netr28ux.inf file to make the driver install under a different name.I tried everything I can to remove all evidence of linksys drivers from my computer, uninstalling and removing driverstore with pnputil.exe, but I cannot seem to find the originating files to uninstall.For now the way I edited the netr28ux.inf file works, but I'd rather be able to install the driver as intended.
View 6 Replies View RelatedI am having problems installing this with the cd that was given, so I went on the site to DL the drivers, i downloaded the zip file, but when i open it there is no setup.exe. Do i need to exract the contents to a certain file?
View 1 Replies View RelatedIs there a driver or will there be a driver to work with WUSB300n adapter running Windows 7 64-bit Home Pro edition ?
View 1 Replies View RelatedSo I have a (relatively) old WMP54GX PCI adapter that used to work great under XP. However I moved and was able to put my computer right next to my router so I no longer needed to use the adapter. Fast forward about three years later, I now have Windows 7 installed and need to use to adapter again, but unfortunately it doesn't seem to be working. The drivers never seem to finish installing after reboot, and I'm not sure what I should be doing. I noticed the most "recent" driver was released in 2006, so it doesn't look like there's even one available for Vista, let alone Windows 7.
Am I looking in the wrong place for the drivers, or is Linksys really not supporting their slightly older hardware on new operating systems? If there are no drivers available, any ways to get it working in Windows 7?
who had a WMP300N with the Broadcom 4329 chip (PCIVEN_14E4&DEV_4329&SUBSYS_00601737&REV_01)Since i got my WMP300N all that i got is a really a big headache, since the drivers DOESN'T are meant for Win 7 (x86/x64), and the guys at Cisco/Linksys really are so kind to bring an unstable driver (v6.100) that they claim is for win 7.
i, as same as a ton of users, really get dissapointed because the driver in the cd does not work on win 7 and the 'official updated driver' is useless as well, and in the end lost a lot of time searching almost in the entire internet for a solution, that some pages claim to have, but the info is oudated, or the links are gone.so in a insurmountable-almost-titanic search, i somehow managed to gather all the required files that i'll put at disposition of those like me have a bad time with a supposed to be a pretty good wireless card.
1- bmc 4329 v4.100, this one is the most 'stable' and works pretty well in 32/64bits, it had a modded .inf wich enables a few features that various users will find pretty useful, when the installer prompts a warning about an unsigned driver, you had to allow the installation
2- bmc 4329 5.100, this one is working too on 32/64 bits, i'm posting it because some people got problems with the 4.100 version, however, the 5.100 is a stock unmodded driver, so maybe it will give connection issues.
I just bought a WMP600N adaptor and although windows 7 recognizes it I would like to install the official drivers from Linksys. When I try to update the drivers that I downloaded from the linksys website I het an access denied error. I am logged in as the administrator. I have already tried uninstalling the default drivers, but still I get the access denied error. I even tried the windows safe mode and still got the access denied error.
With the default windows 7 drivers the connection is quite poor. how I can install the official windows 7 drivers?
i cant install it in the windows 8 its tall me 'the data is invold' and i try all put out and bring in all?
View 2 Replies View Relatedwhen i install using the CD it stops after i plug in the adapter with a 211 error telling me to replug it in blah blah. i tried to manually install the drivers from the CD. it dose this successfully but it wont pick up any net works. and when i use the network app that came with the CD it tells me it is not installed right. what is going on it says on the box windows vista compatible.
View 1 Replies View RelatedI am running Windows 7 with the WUSB600N (v.2). Here is how I got it to work.The driver support is not a .exe. You will have to install it yourself...but it's not a big deal.Download the Windows 7 driver for your OS version from the Linksys Support page.Save it to the desktop and then unzip it to the desktop so you can find it easier.Once unzipped you will see 3 folders: Mac, Win7 32 and Win7 64. Choose accordingly.What I did was install it through the "Device Manager". (Right click "My Computer", choose "Manage", then Device Manager",or use the "Search Bar under the Start Menu...whatever. Once you are in the Device Manager...
1. Make sure your WUSB600N is inserted in your computer.
2. Navigate down to "Network Adapters" If you see your WUSB600N adapter...great! Your halfway home!
3. Right click on the "Linksys WUSB600N Adapter.
4. Choose the option to " Update Driver Software"
5. Choose "Browse My Computer for Software"
6. Navigate to the desktop and choose the folder that contains the name of your Windows 7 platform.
7. It should update but, HOLD ON! We are not done yet!!!
In order for it to start transmitting in that shiny new 5GHZ band, you must go into "Network and Sharing Center". Once there, look on the left hand side of the main window and you will see "Change adapter settings"Go there. You should see here that your existing adapter is still working (enabled) and your new Linksys WUSB600N has a big fat red "X" under it (disabled).Right click on your existing adapter and choose, "DISABLE".Then, right click on the WUSB600N adapter and choose "ENABLE".The last thing you should have to do is choose the network you want to connect to (for me it was the 5GHZ one) ..and Viola!!
I purchased the AE1000 wireless adapter for use with my Linksys WRT54G router. I first tried to install by loading the CD, which went so far as the "Insert your adapter into a USB port" screen. The Windows "processing" circle spun for about twenty minutes, then I was prompted to "insert the wireless adapter" once more. Rinse, repeat. I absolutely cannot get past this step. I scoured the web for an answer and turned up little. I uninstalled my antivirus and firewall software, made certain that files associated with my prior adapter were removed, tried varying USB ports (all 2.0) on my desktop, and had no success. Today, I exchanged the adapter for a replacement, and I'm encountering all of the same difficulties.
View 6 Replies View RelatedI get the following error when running the setup executable downloaded from this site:
Error description: Adapter can't be Found
Model name: AE1200/AE2500
Operating system: Windows 7 SP 1
Software version: 2.1.0.6
Motherboard is an asus p7p55
I have tried all 8 usb ports on the back of my computer and the 2 case ports. Non of them detect the adapter when running the setup executable. I have no other usb devices connected. Windows 7 was installed on this machine at the begining of this month. I have attempted to install the AE2500 on another windows 7 pc and it installed with no problems. I suspect the problem is the motherboard.
I'm trying to install a WMP54G PCI Version 4.1 in my Windows 2000 Pro SP4 computer. I ran the setup cd before installing the card, then took out the disk. After installing the card and powering the computer, the Available Wireless Network screen didn't appear. I also didn't get the Network Monitor icon on the taskbar. Network Monitor appears in the start menu, but can't be started. Device Manager says the card is working properly and there are no conflicts.
I uninstalled the software, removed the card, and repeated the installation process with the same end result. The card light blinks like it is receiving data. I'm using a Linksys WRT54G2 router. Both my desktop (W7) and my laptop (Vista) connect just fine. How can I get my W2K computer on the network?
My windows xp wireless drivers was functioning normally in my dell610.but accidentally i uninstalled it, now i am trying to install it but it ends up with an icon at the bottom which shows that it is installing but nothing is going on.i have tried this several time but i failed.
View 1 Replies View RelatedI couldnt install wifi drivers on windows 8 64 bit on my dell n4010
View 1 Replies View RelatedI just installed Windows 7 on my M1530, and everything works flawlessly...EXCEPT bluetooth. I downloaded the drivers from the dell website (for vista 32bit), but when I try to install it says "Press Fn+F2 or turn on the wireless switch". The wireless switch is already on, and I press Fn+F2, but to no avail. It worked fine on Vista Home Premium 32bit. I tried running the install file in compatibility mode too, to no avail. how to make it work?
View 22 Replies View RelatedI just had to re-install an ancient version of windows XP Home edition on a crashed PC. I plugged in my WUSB54G v4 to the USB outlet, and the wizard came up to install the software. However, XP couldn't find any drivers for it, and I don't appear to have a CD with drivers on it. So, where on this site can I find them? When I go to the WUSB54G page, it just gives me manuals to dowload, but no software...
View 5 Replies View RelatedI need to download XP drivers for my WUSB54GC ver3 Wireless Adapter. I have lost the CD (or can't find it at least) and on the site there seem to be only Vista/windows 7 drivers for the version 3. Will downloading the version 2 XP drivers do? Or should I do something else?
View 1 Replies View RelatedI have a WPC54G version 4 wireless-G notebook adapter. I cannot find anywhere even here the driver for this device? I read the forums and have been googling all morning and I found one topic that said that version 3 (Vista compatible) WPC54G_V31_driver_4.100.15.5_vista.exe..will work with ver 4. I have tried it and my adapter will still not see the files in the extracted folder. There's 5 files in the folder and when I do the hardware/update driver method it won't see the drivers. I have tried all the other version and none will load??
How can I get this driver to work with my Windows XP? I don't have the CD anymore.
I'm trying to install dis wireless network adapter in a computer with a W98SE OS.
I try some drivers, but dowsn't work. Information or the drivers for this network adapter for W98??
I'm having my system lock up / freeze, my OS is win7 64.
The drivers that came on the cd just locked my computer within 1-5 minute intervalls. The driver (Ver.1.1.00.018) I downloaded from [url]... just pushes up the that time with about 30 minutes. Then there's the Ver.8.0.0.162 that explicity says it adds win7 support but I can't update my drivers, it only tells me that I'm already using the latest version, which I'm certain I don't.
Yesterday I contacted live support with the problem that my network driver is crashing and giving me BSODs because of this when my download speed reaches above 5.5MBps.[url]...When I try to install those drivers, I first get a warning that the drivers aren't signed. I press "Continue" to dismiss the message but still at the end it fails to install and gives me the message "The drivers can not be loaded because they are not digitally signed", leaving you with a useless device.I bypassed the check windows is doing by turning off the check by running Windows in "Test Mode". I have test-signed the drivers myself that allowed me to install them. Now my device is working and not giving me BSODs anymore.
What I want is the drivers to be digitally signed by linksys/cisco. I think it's very unprofessional to distribute unsigned/useless drivers to customers. I am lucky that I am somewhat more experienced with this stuff, but what about people that are not? I think everybody should be able to install the latest drivers without any problems, without the need to hack into windows.I hope to see new drivers soon, or the same drivers but then digitally signed so I can turn off "Test Mode" again removing this ugly watermark in the bottom right corner.
I have 1 computer a HP system with Ubuntu 11.04 installation.I would like to install the Linksys WUSB600N-AS (V2) into the Ubuntu but the drivers and instruction is very confusing.tell me which drivers to download and how to install.
View 1 Replies View RelatedI am trying to forward a port so i can connect to my computer because i want to stream a radio station from computer to my phone.I'm trying to forward port 88 on my Linksys WRT54G Version 6.I tried that but Boardwave audio streaming server still says it's not open!Here are some pictures: I'm using Windows XP Professional 32-Bit
Eset AntiVirus
and using Windows firewall
Where are the Vista drivers for WUSB54GSC Hardware version 1?That shambles of a download page has either various XP, which doesn't work, or Vista drivers for hardware v3, which equally doesn't work.If you are really informing me, via a few hours of messing around installing and uninstalling useless drivers, there really is no Vista driver - for a network adapter manufactured in 2008.
View 2 Replies View RelatedI cant find the WUSB600n ver.2 drivers on your support page: url...When I click "Version 1.0" it shows me the Win7 driver but by clicking "Version 2.0" it just says: "Guides and Information" but theres no drivers. I suppose it's a bug.I have a new Laptop so I need the Win7 64bit driver for ver.2.
View 2 Replies View RelatedHow to install model WUSB54GSC.
View 5 Replies View RelatedI recently re-installed Windows on my PC, and I had the Wireless-G PCI Adapter installed before I done the re-installation.Now I've re-installed Windows, the adapter doesn't work. Do I have to re-do the whole process again? Also, I didn't actually install it myself, so any detailed step-by-step tutorial?
View 3 Replies View RelatedI had a hard drive failure recently and replaced my HDD with an identical HDD (WD 500 AAKS) and did a restore from my WD Passport Essential. Everything works as before except I can't install my AE1000 wireless adapter. The OS recognizes the new hardware and I attempt instalation form the setup CD. Istallation goes until it gets to the "Installing" step and then it just stays there forever until it comes back with an error. I am accessing the internet now through a cat 5 ethernet hook-up.
View 2 Replies View RelatedWhat i have to download and where to download some kind of program that will allow me to run/install this on my MAC. Model: AE2500
View 1 Replies View RelatedI just got this wireless notebook card off of ebay, and it did not come with a cd. After just plugging it in it would not install, so then I downloaded the drivers and transfered them to my laptop through a usb drive. I setup the program the best I could and now it says "WPC54G not installed" and "No association with Access Point" on the link information page. How I can install this wireless card?
View 5 Replies View Related