I recently re-installed Windows on my PC, and I had the Wireless-G PCI Adapter installed before I done the re-installation.Now I've re-installed Windows, the adapter doesn't work. Do I have to re-do the whole process again? Also, I didn't actually install it myself, so any detailed step-by-step tutorial?
View 3 RepliesI'm trying to install a WMP54G PCI Version 4.1 in my Windows 2000 Pro SP4 computer. I ran the setup cd before installing the card, then took out the disk. After installing the card and powering the computer, the Available Wireless Network screen didn't appear. I also didn't get the Network Monitor icon on the taskbar. Network Monitor appears in the start menu, but can't be started. Device Manager says the card is working properly and there are no conflicts.
I uninstalled the software, removed the card, and repeated the installation process with the same end result. The card light blinks like it is receiving data. I'm using a Linksys WRT54G2 router. Both my desktop (W7) and my laptop (Vista) connect just fine. How can I get my W2K computer on the network?
making Windows 7 do what it's supposed to? Seriously, there needs to be a button you can click to roll it completely back to XP.
View 1 Replies View RelatedI am having some trouble getting my computer with Windows XP to use the Linksys model WMP54G wireless - G PCI adapter to connect to the network in my house. I have installed the hardware and the drivers. When I open the view available wireless networks window my network shows up with two bars of strength. But when I select this network and click connect, I get an error message saying "Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try to connect again." I have other computers connecting to this wireless network without any problem. The wireless router I am using is the model WRT150N wireless
View 6 Replies View RelatedMy router is located in my living room and my desktop is in a room located some 30 fett away with several walls in between. I am a light user (surf internet, read emails) and I do not have any special requirements.My router is a WRT54G router and my Wireless-G PCI Adapter is a WMP54G. Both have worked well for the last 5 years or so. Unfortunately, I had some work done in my room and the workers have broken the antenna on my desktop PCI adapter.What should I buy to replace my WMP54G?Should I get a PCI adapter or an USB adapter? Which one?Reliability, range and ease of use are my priorities. Price is not a major concern.
View 1 Replies View RelatedI have the PCI adapter installed on my computer. I have installed the driver and my computer recognizes the adapter, can see the network I want to connect to... but will NOT connect.I have 9 other wireless devices connected with no issues. But the PCI adapter will not work.
View 1 Replies View RelatedI have a wireless adapter WMP54G for a long time, but recently i updated to windows 7 and the problems begun.
After read a lot of stuffs about this problem, i downloaded a driver by RALINK and installed de adpter. But......on the installation, show two hardware: one is the adapter Linksys WMP54G...and the other can't be installed. So..on the Device manager appear like "unknown device" on the three of "USB controllers"
So...i'm already try a lot of things and can't install this adapter
I'm trying to install dis wireless network adapter in a computer with a W98SE OS.
I try some drivers, but dowsn't work. Information or the drivers for this network adapter for W98??
I installed Windows 7 Ultimate on my computer, and I cannot get my Linksys to work on it, the light doesn't light but it shows up in device manager. I've tried using Vista 32-bit drivers but it doesn't work at all, I am thinking it isn't a driver issue at all because it shows that the driver is up to date.
View 1 Replies View RelatedI got the D-Link router setup and with the network key. When i tried to type the network key in my pc(which has the adapter). it gave me an error.Network key password need to be 40 bits or 104 bit depend on network configuration. This can be 5 or 13 ascii characters or 10 or 26 hexadecimal characters". what does it mean? because the network key work with other pc..but not my pc with WMP 54G. reason?
View 3 Replies View RelatedI had an antenna break on a WMP54g v 4.1 and I was able to replace it with a WMP54g v 4 but I'm not having a lot of luck getting the driver to install. This is on Win7 32 bit Home Premium. I assume this is due to the fact that I was using a newer and switched to an older piece of hardware and there is some driver issues. How to uninstall the old driver completely so I can start fresh I have tried everything I know to do and can't seem to get anywhere.
View 1 Replies View RelatedWhere I can find a driver for:WMP54g v2 for Vista SP2 32bit It used to work just fine, until I recently reinstalled Vista (and installed all the updates) and now my internet connection is "limited." This means that it connects, but is extremely slow and the connection goes in and out.Here are some random notes about my problem:
Nothing is disabled, there are not any conflicts, and the problem remains even if I restore the OS back to restore point that I created right after reinstalling Vista (and before doing anything else).If I hook the computer directly up to my netgear router via cable, Windows Update will download and install a more recent version of said driver (no improvement).Other laptops in the house have no problems with the wifi. I have turned off both my cable modem and wifi router several times.The adapter does connect to the internet, and the signal strength is "excellent", but if drill down to the properties of the connection, it says that IPV4 is connected to the internet, but IPV6 is "limited." This then results in a very weak connection to the internet that goes in and out. I have tried unchecking IPV6 per some recommendations, but that did not work. I have tried resetting everything (winsock, etc) via command prompt. Firewall is off, no antivirus software
I just bought this wireless g pci card and installed the software from the cd on to a windows 2000 pc. When I went to run the software I can only click on the exit button. I looked on the forums and saw that for win 2000 you should only install the drivers by allowing your computer to detect the card. I uninstalled the software but my computer wont detect the card now and if I reinstall the software I cant even open it up anymore. The card is not listed in the device manager at all. Would installing i the first time have created anything in the registry that would have been left behind in the uninstall and would it be blocking the computer from detecting this as new hardware?
View 9 Replies View RelatedI recently bought and installed Windows 8 Pro and figured that there are no drivers available for the WMP54G Wireless Network Adapter (version 4.1)on this OS. What is the solution?
View 4 Replies View RelatedI installed the Linksys WMP54G wireless adapter card in my windows 98 SE computer before I installed the software. (I now know the software is supposed to be installed before the hardware is installed.) The software didn't work. It wouldn't connect to any network. (I have used this adapter card and software before, so I know how to get it to connect when it is working properly.)I used the uninstall to uninstall it, but it didn't work. It removed most of the files, but in the "program add/remove" window (in control panel), the Linksys software is still listed. Using "program add/remove" to try to remove the Linksys software also doesn't work. It acts as if it is removing the software and then shows a message that says the software is 100% removed, but, after rebooting, the software is still listed in the "program add/remove" list. The WMP54G CD won't reinstall the software. Instead it says the software is already installed. How to find whatever WMP54G software file(s) are left on my computer and tell me how to manually remove them.
View 1 Replies View RelatedI have the WMP54G internal wireless adaptor. It normally works fine, but I have been having problems with it lately when I turn my computer back on from sleep. Even thought the wireless router works just fine, when the computer wakes up from sleep the adaptor does not seem to detect any network. I have to restart my computer, and then the adaptor detects the network.
View 1 Replies View RelatedI am having trouble locating and installing my pci receiver card driver using windows 7 64 bit op sys
View 1 Replies View RelatedTrying to install WMP54G v4.0 on XP SP3. I have tried all three PCI slots. Removing driver RT2500.SYS system will boot. Put it back and BSOD Error:driver_irql_not_less_or_equal
View 8 Replies View RelatedI'm having an issue with a 2 week old WMP54G pci adapter. The behavior is as follows: I get a successful connection and excellent speeds, but every 10 seconds it stops transmitting and drops off the network for a moment. Then everything comes right back. 10 seconds on, drop, 10 seconds on, drop.I've investigated possible sources of interference, but there aren't any strong networks coming though on the same or nearby channels. Moreover, other devices sitting in essentially the same spot are connected consistently and show no variation in the signal strength.
Other info: OS is Ubuntu 10.10, the machine is a Dell GX270.
How to install model WUSB54GSC.
View 5 Replies View RelatedI had a hard drive failure recently and replaced my HDD with an identical HDD (WD 500 AAKS) and did a restore from my WD Passport Essential. Everything works as before except I can't install my AE1000 wireless adapter. The OS recognizes the new hardware and I attempt instalation form the setup CD. Istallation goes until it gets to the "Installing" step and then it just stays there forever until it comes back with an error. I am accessing the internet now through a cat 5 ethernet hook-up.
View 2 Replies View RelatedWhat i have to download and where to download some kind of program that will allow me to run/install this on my MAC. Model: AE2500
View 1 Replies View RelatedI just got this wireless notebook card off of ebay, and it did not come with a cd. After just plugging it in it would not install, so then I downloaded the drivers and transfered them to my laptop through a usb drive. I setup the program the best I could and now it says "WPC54G not installed" and "No association with Access Point" on the link information page. How I can install this wireless card?
View 5 Replies View RelatedHow do i install the WMP300N without the installation CD ? I bought a new PC and i cant find the CD?
View 7 Replies View Relatedi cant install it in the windows 8 its tall me 'the data is invold' and i try all put out and bring in all?
View 2 Replies View RelatedWe just bought a new computer and I am trying to move things around. Does anyone have the original install CD for trhe WUSB54AG? I can't find mine and the driver is no longer online.
View 3 Replies View RelatedI've tried to connect the usb adapter with an Acer Aspire 7736ZG, installed with Windows 7 64bit edition. Well, I *can't*.
- I started the CD installation and when prompted, I've connected the USB stick. Well, the stick couldn't be detected, and the installation couldn't continue.
- Then, I used the Windows7 drivers and managed to install the device (device manager, sees the device normally). But, the CD still couldn't continue the installation of extra software.
- Ok, no linksys software - no big deal. I would use the Windosw wireless management program. NO! The card seems not be present, and the only wireless connections I get, is by the onboard 802.11n card of the laptop (don't ask why I bought an extra 802.11n card).
- Nothing happens by disabling the onboard 802.11n card and trying all over again.
- If I go to the connection and sharing center and select "change setting of adapter", well, my expensive and cisco-super-duper card, isn't there, and I can only find the Atheros ARB93 Wireless card and the local (wired) adapter.
So, to sum up, 64bit driver seems to be installed correctly on the device manager (as proposed on other threads) but the adapter is not present on the system. How cool is that?
I just got a WPC600N wireless card working with XP Service Pack 3.Do NOT install the software, just slide the card in.Windows will ask for the drivers, point it to the CD or where you downloaded them.
View 1 Replies View RelatedI am trying to install the Ae1200 on my notebook (windowsXP), which doesn't have a cd drive. I downloaded the driver from cisco page, and also copied setup disc from a 2nd comp onto a usb drive. Using both options, the wizards starts correctly, but then ends with error message saying "cannot find specified file"
View 2 Replies View Relatedwhen i install using the CD it stops after i plug in the adapter with a 211 error telling me to replug it in blah blah. i tried to manually install the drivers from the CD. it dose this successfully but it wont pick up any net works. and when i use the network app that came with the CD it tells me it is not installed right. what is going on it says on the box windows vista compatible.
View 1 Replies View RelatedI am running Windows 7 with the WUSB600N (v.2). Here is how I got it to work.The driver support is not a .exe. You will have to install it yourself...but it's not a big deal.Download the Windows 7 driver for your OS version from the Linksys Support page.Save it to the desktop and then unzip it to the desktop so you can find it easier.Once unzipped you will see 3 folders: Mac, Win7 32 and Win7 64. Choose accordingly.What I did was install it through the "Device Manager". (Right click "My Computer", choose "Manage", then Device Manager",or use the "Search Bar under the Start Menu...whatever. Once you are in the Device Manager...
1. Make sure your WUSB600N is inserted in your computer.
2. Navigate down to "Network Adapters" If you see your WUSB600N adapter...great! Your halfway home!
3. Right click on the "Linksys WUSB600N Adapter.
4. Choose the option to " Update Driver Software"
5. Choose "Browse My Computer for Software"
6. Navigate to the desktop and choose the folder that contains the name of your Windows 7 platform.
7. It should update but, HOLD ON! We are not done yet!!!
In order for it to start transmitting in that shiny new 5GHZ band, you must go into "Network and Sharing Center". Once there, look on the left hand side of the main window and you will see "Change adapter settings"Go there. You should see here that your existing adapter is still working (enabled) and your new Linksys WUSB600N has a big fat red "X" under it (disabled).Right click on your existing adapter and choose, "DISABLE".Then, right click on the WUSB600N adapter and choose "ENABLE".The last thing you should have to do is choose the network you want to connect to (for me it was the 5GHZ one) ..and Viola!!
Whenever I try to install the drivers for the adapter normally, Windows 7x64 gives me a message that the device name "Compact Wireless-G USB Network Adapter" already exists and is in use, preventing me from installing the wireless driver properly. In order to get around it, I changed all "Compact Wireless-G USB Network Adapter" fields into "Compact Wireless-G USB Network Adapter B" in the netr28ux.inf file to make the driver install under a different name.I tried everything I can to remove all evidence of linksys drivers from my computer, uninstalling and removing driverstore with pnputil.exe, but I cannot seem to find the originating files to uninstall.For now the way I edited the netr28ux.inf file works, but I'd rather be able to install the driver as intended.
View 6 Replies View RelatedI purchased the AE1000 wireless adapter for use with my Linksys WRT54G router. I first tried to install by loading the CD, which went so far as the "Insert your adapter into a USB port" screen. The Windows "processing" circle spun for about twenty minutes, then I was prompted to "insert the wireless adapter" once more. Rinse, repeat. I absolutely cannot get past this step. I scoured the web for an answer and turned up little. I uninstalled my antivirus and firewall software, made certain that files associated with my prior adapter were removed, tried varying USB ports (all 2.0) on my desktop, and had no success. Today, I exchanged the adapter for a replacement, and I'm encountering all of the same difficulties.
View 6 Replies View Related