We just bought a new computer and I am trying to move things around. Does anyone have the original install CD for trhe WUSB54AG? I can't find mine and the driver is no longer online.
View 3 RepliesI just installed windows xp pro 64bit and i am not able to use it im guessing because i need the correct driver, ive tried looking around but couldnt find anything. I also try it working with Windows 7 ultimate (64bit) and i could not get it working on that either.
View 4 Replies View RelatedI am surprised the Linksys support page does not provide the driver of WUSB54AG after I found I lost the CD. Where I can download it?
View 3 Replies View RelatedJust got a new router. All of my devices connect fine to it except for the desktop that is using an external Linksys wireless adapter (WUSB54AG).The desktop is running Windows XP (Home Edition) SP3.The latest driver for the adapter has been installed (3.0.18.0).I am able to connect if security on the router is turned OFF.The router has 3 security options:
1) WPA-PSK (TKIP)
2) WPA2-PSK (AES)
3) WPA-PSk (TKIP) + WPA2-PSK (AES)
My understanding (from Linksys tech support) is that the device SHOULD be able to connect using WPA-PSK (TKIP). My Linksys Monitor indicates that the device is connected to the access point but not the internet (when I used WPA-PSK (TKIP). The IP address that is assigned is 169.254.3.129 and not the expected 192.168.1.x.When I turn security OFF on the router, the device can connect and I am assigned a "good" IP address (192.168.1.x).
My desktop can go to internet with ethernet wire on. After installing wireless adaptor driver, the adaptor shows green solid light on 'power' and blinking light on 'Link'. The Linksys icon shows 'Cannot associate with the access point'. I called Verizon and was told that the adaptor might have problem. I want to know if really the adaptor's problem or the adaptor installation problem.
View 1 Replies View RelatedWhen I connect my WUSB54AG, Windows(xp) detects cohiba 3887 rev0 device and I can't install it. How can I fix it?
View 4 Replies View RelatedHow to install model WUSB54GSC.
View 5 Replies View RelatedI recently re-installed Windows on my PC, and I had the Wireless-G PCI Adapter installed before I done the re-installation.Now I've re-installed Windows, the adapter doesn't work. Do I have to re-do the whole process again? Also, I didn't actually install it myself, so any detailed step-by-step tutorial?
View 3 Replies View RelatedI had a hard drive failure recently and replaced my HDD with an identical HDD (WD 500 AAKS) and did a restore from my WD Passport Essential. Everything works as before except I can't install my AE1000 wireless adapter. The OS recognizes the new hardware and I attempt instalation form the setup CD. Istallation goes until it gets to the "Installing" step and then it just stays there forever until it comes back with an error. I am accessing the internet now through a cat 5 ethernet hook-up.
View 2 Replies View RelatedWhat i have to download and where to download some kind of program that will allow me to run/install this on my MAC. Model: AE2500
View 1 Replies View RelatedI just got this wireless notebook card off of ebay, and it did not come with a cd. After just plugging it in it would not install, so then I downloaded the drivers and transfered them to my laptop through a usb drive. I setup the program the best I could and now it says "WPC54G not installed" and "No association with Access Point" on the link information page. How I can install this wireless card?
View 5 Replies View RelatedHow do i install the WMP300N without the installation CD ? I bought a new PC and i cant find the CD?
View 7 Replies View Relatedi cant install it in the windows 8 its tall me 'the data is invold' and i try all put out and bring in all?
View 2 Replies View RelatedI've tried to connect the usb adapter with an Acer Aspire 7736ZG, installed with Windows 7 64bit edition. Well, I *can't*.
- I started the CD installation and when prompted, I've connected the USB stick. Well, the stick couldn't be detected, and the installation couldn't continue.
- Then, I used the Windows7 drivers and managed to install the device (device manager, sees the device normally). But, the CD still couldn't continue the installation of extra software.
- Ok, no linksys software - no big deal. I would use the Windosw wireless management program. NO! The card seems not be present, and the only wireless connections I get, is by the onboard 802.11n card of the laptop (don't ask why I bought an extra 802.11n card).
- Nothing happens by disabling the onboard 802.11n card and trying all over again.
- If I go to the connection and sharing center and select "change setting of adapter", well, my expensive and cisco-super-duper card, isn't there, and I can only find the Atheros ARB93 Wireless card and the local (wired) adapter.
So, to sum up, 64bit driver seems to be installed correctly on the device manager (as proposed on other threads) but the adapter is not present on the system. How cool is that?
I just got a WPC600N wireless card working with XP Service Pack 3.Do NOT install the software, just slide the card in.Windows will ask for the drivers, point it to the CD or where you downloaded them.
View 1 Replies View RelatedI have forgotten my Netgear security/passphrase. How can I retrieve the original key or install a new one?
View 2 Replies View RelatedI am trying to install the Ae1200 on my notebook (windowsXP), which doesn't have a cd drive. I downloaded the driver from cisco page, and also copied setup disc from a 2nd comp onto a usb drive. Using both options, the wizards starts correctly, but then ends with error message saying "cannot find specified file"
View 2 Replies View Relatedwhen i install using the CD it stops after i plug in the adapter with a 211 error telling me to replug it in blah blah. i tried to manually install the drivers from the CD. it dose this successfully but it wont pick up any net works. and when i use the network app that came with the CD it tells me it is not installed right. what is going on it says on the box windows vista compatible.
View 1 Replies View RelatedI am running Windows 7 with the WUSB600N (v.2). Here is how I got it to work.The driver support is not a .exe. You will have to install it yourself...but it's not a big deal.Download the Windows 7 driver for your OS version from the Linksys Support page.Save it to the desktop and then unzip it to the desktop so you can find it easier.Once unzipped you will see 3 folders: Mac, Win7 32 and Win7 64. Choose accordingly.What I did was install it through the "Device Manager". (Right click "My Computer", choose "Manage", then Device Manager",or use the "Search Bar under the Start Menu...whatever. Once you are in the Device Manager...
1. Make sure your WUSB600N is inserted in your computer.
2. Navigate down to "Network Adapters" If you see your WUSB600N adapter...great! Your halfway home!
3. Right click on the "Linksys WUSB600N Adapter.
4. Choose the option to " Update Driver Software"
5. Choose "Browse My Computer for Software"
6. Navigate to the desktop and choose the folder that contains the name of your Windows 7 platform.
7. It should update but, HOLD ON! We are not done yet!!!
In order for it to start transmitting in that shiny new 5GHZ band, you must go into "Network and Sharing Center". Once there, look on the left hand side of the main window and you will see "Change adapter settings"Go there. You should see here that your existing adapter is still working (enabled) and your new Linksys WUSB600N has a big fat red "X" under it (disabled).Right click on your existing adapter and choose, "DISABLE".Then, right click on the WUSB600N adapter and choose "ENABLE".The last thing you should have to do is choose the network you want to connect to (for me it was the 5GHZ one) ..and Viola!!
Whenever I try to install the drivers for the adapter normally, Windows 7x64 gives me a message that the device name "Compact Wireless-G USB Network Adapter" already exists and is in use, preventing me from installing the wireless driver properly. In order to get around it, I changed all "Compact Wireless-G USB Network Adapter" fields into "Compact Wireless-G USB Network Adapter B" in the netr28ux.inf file to make the driver install under a different name.I tried everything I can to remove all evidence of linksys drivers from my computer, uninstalling and removing driverstore with pnputil.exe, but I cannot seem to find the originating files to uninstall.For now the way I edited the netr28ux.inf file works, but I'd rather be able to install the driver as intended.
View 6 Replies View RelatedI purchased the AE1000 wireless adapter for use with my Linksys WRT54G router. I first tried to install by loading the CD, which went so far as the "Insert your adapter into a USB port" screen. The Windows "processing" circle spun for about twenty minutes, then I was prompted to "insert the wireless adapter" once more. Rinse, repeat. I absolutely cannot get past this step. I scoured the web for an answer and turned up little. I uninstalled my antivirus and firewall software, made certain that files associated with my prior adapter were removed, tried varying USB ports (all 2.0) on my desktop, and had no success. Today, I exchanged the adapter for a replacement, and I'm encountering all of the same difficulties.
View 6 Replies View RelatedI recently reformatted my HD and when i went to install my wireless adapter i realized i had lost my Install CD for my WUSB54G Ver. 4 USB wireless adapter. Is there anywhere to download the install program?(i'm running windows xp)
View 4 Replies View RelatedI need to install AE1200 on fedora machine.
View 9 Replies View RelatedI bought a AE2500 adapter recently and attempted to install the Cisco Connect software. It gets to the point of connecting the device to the wireless, then crashes. I noticed that as I plugged the device in, it was recognised and activated without running the software at all; at the time of the software trying to connect the device, it's already connected.Just in case it was a matter of an old version of the driver and Cisco Connect software, I went online to the website and downloaded both the most recent driver and the latest version of Cisco Connect. The Cisco Connect crashed just like the version on the CD, and the driver said it was already the latest version and wouldn't install.So I tried the direct chat option. I spoke to two people. One of them lead me to give them a lot of information, then began asking me about my router... and promptly forgot about the adapter. They even had me on the path to resetting and installing software for the router I'm connected to, which isn't mine. Then the chat session crashed. why the Cisco Connect program keeps repeatedly crashing, and how I can stop it from doing so. As it stands, I think the adapter is overloading the memory on my computer and causing blue screens; I've been getting them ever since I connected the adapter. I think it might have something to do with my computer automatically detecting and activating the device when it's plugged in, but I'm not sure.
View 5 Replies View RelatedWhat steps are required to install my WUSB11 ver 2.6 wireless adapter on my new Windows 7 machine?
View 1 Replies View RelatedI get the following error when running the setup executable downloaded from this site:
Error description: Adapter can't be Found
Model name: AE1200/AE2500
Operating system: Windows 7 SP 1
Software version: 2.1.0.6
Motherboard is an asus p7p55
I have tried all 8 usb ports on the back of my computer and the 2 case ports. Non of them detect the adapter when running the setup executable. I have no other usb devices connected. Windows 7 was installed on this machine at the begining of this month. I have attempted to install the AE2500 on another windows 7 pc and it installed with no problems. I suspect the problem is the motherboard.
I have tried installing this device on Windows 7 64bit machine. The install seems to go fine and the device works at 2.4G.
But I purchased this unit to be able to test a clients 5GHz system. There does not seem to be any place to switch from 2.4G to 5.0G.
All Installed my AE1000 this evening, after two go`s got it to work BUT the Cisco installer comes up with "Our customer support team can assist Your Linksys Adapter was not successfully setup." but it is working .. I never got the screen with the four "bubbles" (as per the instructions here on the Cisco website)
PS Running Win7 with AVG security
I cant install drivers for Windovs XP both 32-64 Professional. Original CD tells me for x64 OS is not supported, also, when trying to install only drivers it just can't find it. For x32 same problem - can't install drivers. I've got Intel DP45SG.
View 5 Replies View RelatedI have to reformat my hard drsk to original in ACER window vista system. NOw I can't install WMP54GX driver downloaded from Linksys web support.
View 1 Replies View RelatedI'm trying to install a WMP54G PCI Version 4.1 in my Windows 2000 Pro SP4 computer. I ran the setup cd before installing the card, then took out the disk. After installing the card and powering the computer, the Available Wireless Network screen didn't appear. I also didn't get the Network Monitor icon on the taskbar. Network Monitor appears in the start menu, but can't be started. Device Manager says the card is working properly and there are no conflicts.
I uninstalled the software, removed the card, and repeated the installation process with the same end result. The card light blinks like it is receiving data. I'm using a Linksys WRT54G2 router. Both my desktop (W7) and my laptop (Vista) connect just fine. How can I get my W2K computer on the network?
If someone has the original firmware for the EA3500 to copy. I need to downgrade my router after Cisco sabotaged it with their Cloud Connect. This will be the firmware you have right out of the box. Be sure you go into the Admin. section and Save a Copy before you ever connect to the Internet. Also Uncheck the Auto Updates box or you will be fed the Cloud Connect (and its amazing Terms Of Service).
View 6 Replies View RelatedI have new PC with Window 7 and trying to set up E2000 on new computer with original set up CD. States I need go back to my old computer and set up new key and transfer to new computer. I do not have access to old computer. getting set up on new computer?
View 3 Replies View Related