I have to reformat my hard drsk to original in ACER window vista system. NOw I can't install WMP54GX driver downloaded from Linksys web support.
View 1 RepliesI've tried to connect the usb adapter with an Acer Aspire 7736ZG, installed with Windows 7 64bit edition. Well, I *can't*.
- I started the CD installation and when prompted, I've connected the USB stick. Well, the stick couldn't be detected, and the installation couldn't continue.
- Then, I used the Windows7 drivers and managed to install the device (device manager, sees the device normally). But, the CD still couldn't continue the installation of extra software.
- Ok, no linksys software - no big deal. I would use the Windosw wireless management program. NO! The card seems not be present, and the only wireless connections I get, is by the onboard 802.11n card of the laptop (don't ask why I bought an extra 802.11n card).
- Nothing happens by disabling the onboard 802.11n card and trying all over again.
- If I go to the connection and sharing center and select "change setting of adapter", well, my expensive and cisco-super-duper card, isn't there, and I can only find the Atheros ARB93 Wireless card and the local (wired) adapter.
So, to sum up, 64bit driver seems to be installed correctly on the device manager (as proposed on other threads) but the adapter is not present on the system. How cool is that?
So I have a (relatively) old WMP54GX PCI adapter that used to work great under XP. However I moved and was able to put my computer right next to my router so I no longer needed to use the adapter. Fast forward about three years later, I now have Windows 7 installed and need to use to adapter again, but unfortunately it doesn't seem to be working. The drivers never seem to finish installing after reboot, and I'm not sure what I should be doing. I noticed the most "recent" driver was released in 2006, so it doesn't look like there's even one available for Vista, let alone Windows 7.
Am I looking in the wrong place for the drivers, or is Linksys really not supporting their slightly older hardware on new operating systems? If there are no drivers available, any ways to get it working in Windows 7?
when i install using the CD it stops after i plug in the adapter with a 211 error telling me to replug it in blah blah. i tried to manually install the drivers from the CD. it dose this successfully but it wont pick up any net works. and when i use the network app that came with the CD it tells me it is not installed right. what is going on it says on the box windows vista compatible.
View 1 Replies View RelatedI have a WM600N wireless N dual band, I downloaded the drivers off linksys site for my vista 32/64 OS, the file is zipped, I copied it to cd from a different pc then the one it goes onto, and cannot run it, I also opened up the zipped file and copied its contents onto a cd and still couldn't get the pc to see them as drivers.Anyway, after I download the zipped file, which I have to do on a second pc in order to put on a second pc, how do I do that? What do I do with the zipped river file in order to get vista to see it and install it.
View 4 Replies View RelatedWhere I can find a driver for:WMP54g v2 for Vista SP2 32bit It used to work just fine, until I recently reinstalled Vista (and installed all the updates) and now my internet connection is "limited." This means that it connects, but is extremely slow and the connection goes in and out.Here are some random notes about my problem:
Nothing is disabled, there are not any conflicts, and the problem remains even if I restore the OS back to restore point that I created right after reinstalling Vista (and before doing anything else).If I hook the computer directly up to my netgear router via cable, Windows Update will download and install a more recent version of said driver (no improvement).Other laptops in the house have no problems with the wifi. I have turned off both my cable modem and wifi router several times.The adapter does connect to the internet, and the signal strength is "excellent", but if drill down to the properties of the connection, it says that IPV4 is connected to the internet, but IPV6 is "limited." This then results in a very weak connection to the internet that goes in and out. I have tried unchecking IPV6 per some recommendations, but that did not work. I have tried resetting everything (winsock, etc) via command prompt. Firewall is off, no antivirus software
I've been searching on linksys's website and was unable to locate the driver for AE1200 (Vista). They still sell the product in their online store, however the support seems to be removed. Where I can locate this? I reinstalled VISTA and require the drivers to have wireless/internet access.
View 1 Replies View RelatedI am trying to install the Ae1200 on my notebook (windowsXP), which doesn't have a cd drive. I downloaded the driver from cisco page, and also copied setup disc from a 2nd comp onto a usb drive. Using both options, the wizards starts correctly, but then ends with error message saying "cannot find specified file"
View 2 Replies View RelatedI have tried Intel tools and latest drivers ( w/ and w/o pro wireless utility) but cannot pass thru code 10 error. Tried uninstall and install....as earlier card 4965 agn worked fine but seems like some conflict is stopping successful 5300 agn driver install.
View 20 Replies View Relatedwhere can i find a sub to rs232 driver free download??
View 1 Replies View RelatedIve been using my linksys wusb54g network adapter for a while. I have windows vista and until today it has been working fine. I reinstalled my OS because i had been having blue screen of death problems. Now that i've done this, i cant seem to get my adapter to work againIve seen a bunch of sites saying i need to install ralink rt2500usb or something, but the links for it never work as these pages are several years old.I cant figure this out. All i need to do is get my internet working and this adapter just doesnt work. Theres no support for vista i guess.
View 9 Replies View RelatedHow to install model WUSB54GSC.
View 5 Replies View RelatedI recently re-installed Windows on my PC, and I had the Wireless-G PCI Adapter installed before I done the re-installation.Now I've re-installed Windows, the adapter doesn't work. Do I have to re-do the whole process again? Also, I didn't actually install it myself, so any detailed step-by-step tutorial?
View 3 Replies View RelatedI had a hard drive failure recently and replaced my HDD with an identical HDD (WD 500 AAKS) and did a restore from my WD Passport Essential. Everything works as before except I can't install my AE1000 wireless adapter. The OS recognizes the new hardware and I attempt instalation form the setup CD. Istallation goes until it gets to the "Installing" step and then it just stays there forever until it comes back with an error. I am accessing the internet now through a cat 5 ethernet hook-up.
View 2 Replies View RelatedWhat i have to download and where to download some kind of program that will allow me to run/install this on my MAC. Model: AE2500
View 1 Replies View RelatedWhere are the Vista drivers for WUSB54GSC Hardware version 1?That shambles of a download page has either various XP, which doesn't work, or Vista drivers for hardware v3, which equally doesn't work.If you are really informing me, via a few hours of messing around installing and uninstalling useless drivers, there really is no Vista driver - for a network adapter manufactured in 2008.
View 2 Replies View RelatedWhere can i find driver for WPC54G ver.4 (FOUR). I looked for on official site, and there are drivers only for ver. 1, 2, 3, 3.1, 5, and 7! Where can i find drivers for ver.4?
My OS is MS Windows 2000 SP4.
I just got this wireless notebook card off of ebay, and it did not come with a cd. After just plugging it in it would not install, so then I downloaded the drivers and transfered them to my laptop through a usb drive. I setup the program the best I could and now it says "WPC54G not installed" and "No association with Access Point" on the link information page. How I can install this wireless card?
View 5 Replies View RelatedHow do i install the WMP300N without the installation CD ? I bought a new PC and i cant find the CD?
View 7 Replies View Relatedi cant install it in the windows 8 its tall me 'the data is invold' and i try all put out and bring in all?
View 2 Replies View RelatedWe just bought a new computer and I am trying to move things around. Does anyone have the original install CD for trhe WUSB54AG? I can't find mine and the driver is no longer online.
View 3 Replies View RelatedI just got a WPC600N wireless card working with XP Service Pack 3.Do NOT install the software, just slide the card in.Windows will ask for the drivers, point it to the CD or where you downloaded them.
View 1 Replies View RelatedI am surprised the Linksys support page does not provide the driver of WUSB54AG after I found I lost the CD. Where I can download it?
View 3 Replies View RelatedSo I lost the CD to my Cisco Linksys AE1200 wireless USB adapter and I can't seem to find the drivers for it ANYWHERE.
View 1 Replies View RelatedI have Linksys WAP54G router in my lab and Linksys Wireless LAN card WAP54G adapter in my client PC.
Which driver is used for LAN Card?
Here is my answer to the lack of support from Cisco:
[URL] I am presently using this driver to connect.
Due to me losing the install CD for this card in a recent move, I am trying to download this driver from the LinkSys site and the process never starts, i.e. the download dialogue box comes up and I choose "save" because I need to sneaker-net the thing to another PC in the house.
View 3 Replies View RelatedI cannot find a driver for this model. The linksys donwload site has version 1, 2, and 4... not ver.3
View 5 Replies View RelatedI'm looking for the xp driver for the Compact Wireless-G USB Adapter Model Number: WUSB54GC. Linksys only has the vista one listed. Dwhere to find it?
View 5 Replies View RelatedAre there any updated drivers for the AE1200 on windows 8? in win 8, I'm no seeing both bands - only 2.4Ghz and I'm only connecting at 54Mhz.
The disc that came with it has V5.100.68.46 which seem to be the lastest on the support site.
My husband got new computer. Installed the driver for his WUSB11 adapter and nada. Windows says the driver isn't installed. Linksys says its running
View 9 Replies View RelatedI am running Windows 7 with the WUSB600N (v.2). Here is how I got it to work.The driver support is not a .exe. You will have to install it yourself...but it's not a big deal.Download the Windows 7 driver for your OS version from the Linksys Support page.Save it to the desktop and then unzip it to the desktop so you can find it easier.Once unzipped you will see 3 folders: Mac, Win7 32 and Win7 64. Choose accordingly.What I did was install it through the "Device Manager". (Right click "My Computer", choose "Manage", then Device Manager",or use the "Search Bar under the Start Menu...whatever. Once you are in the Device Manager...
1. Make sure your WUSB600N is inserted in your computer.
2. Navigate down to "Network Adapters" If you see your WUSB600N adapter...great! Your halfway home!
3. Right click on the "Linksys WUSB600N Adapter.
4. Choose the option to " Update Driver Software"
5. Choose "Browse My Computer for Software"
6. Navigate to the desktop and choose the folder that contains the name of your Windows 7 platform.
7. It should update but, HOLD ON! We are not done yet!!!
In order for it to start transmitting in that shiny new 5GHZ band, you must go into "Network and Sharing Center". Once there, look on the left hand side of the main window and you will see "Change adapter settings"Go there. You should see here that your existing adapter is still working (enabled) and your new Linksys WUSB600N has a big fat red "X" under it (disabled).Right click on your existing adapter and choose, "DISABLE".Then, right click on the WUSB600N adapter and choose "ENABLE".The last thing you should have to do is choose the network you want to connect to (for me it was the 5GHZ one) ..and Viola!!
Whenever I try to install the drivers for the adapter normally, Windows 7x64 gives me a message that the device name "Compact Wireless-G USB Network Adapter" already exists and is in use, preventing me from installing the wireless driver properly. In order to get around it, I changed all "Compact Wireless-G USB Network Adapter" fields into "Compact Wireless-G USB Network Adapter B" in the netr28ux.inf file to make the driver install under a different name.I tried everything I can to remove all evidence of linksys drivers from my computer, uninstalling and removing driverstore with pnputil.exe, but I cannot seem to find the originating files to uninstall.For now the way I edited the netr28ux.inf file works, but I'd rather be able to install the driver as intended.
View 6 Replies View Related