Due to me losing the install CD for this card in a recent move, I am trying to download this driver from the LinkSys site and the process never starts, i.e. the download dialogue box comes up and I choose "save" because I need to sneaker-net the thing to another PC in the house.
View 3 RepliesI have the above mentioned WMP54GS. And I just got a Windows 7 capable computer and got it installed. Now I can't find a driver that will work at all. Other than the Broadcom drivers that Windows installs naturally. (The Broadcom drivers are terrible. I play World of Warcraft and when before on my old Vista 64-Bit system I would get around 50 to 60 MS I now get 180 to 200. ) How to get this to work.
View 9 Replies View RelatedI am surprised the Linksys support page does not provide the driver of WUSB54AG after I found I lost the CD. Where I can download it?
View 3 Replies View RelatedI'm looking for the xp driver for the Compact Wireless-G USB Adapter Model Number: WUSB54GC. Linksys only has the vista one listed. Dwhere to find it?
View 5 Replies View RelatedI have a WM600N wireless N dual band, I downloaded the drivers off linksys site for my vista 32/64 OS, the file is zipped, I copied it to cd from a different pc then the one it goes onto, and cannot run it, I also opened up the zipped file and copied its contents onto a cd and still couldn't get the pc to see them as drivers.Anyway, after I download the zipped file, which I have to do on a second pc in order to put on a second pc, how do I do that? What do I do with the zipped river file in order to get vista to see it and install it.
View 4 Replies View RelatedI have a WMP54GS Installed in a SONY VAIO with a Pentium 4 2.6 ghz processor, 2 gb of DDR Ram, and Just over 60 GB of Hard Drive space. I've run this setup for over two years at this point, all on an XP operating System, from sp1 all the way up to sp3 with no issues. A week ago I ended up with a trojan on my system, and had to do a full recovery. This time I used an XP Pro copy that came with sp2. Not the same copy of XP that had been running previously. Needless to say when I had the OS finally installed and running, it didn't recognise my wireless adapter. I figured I needed to run through the same process as I had when I first purchased the adapter, and took the card out, ran the intsallation disc, followed the intructions, powered off, and reinserted the card. When I booted back up, there was simply a gray box in the lower left showing "disabled". I clicked on it, and it showed that there were no networks in range, when there should have been several. The only tab on the screen that I was able to click was "exit". I wasn't able to perform manual setup, and when I clicked the "xp setup" option, nothing happened. I was unable to find the device in the device manager (though it may be in the "other devices" list with a question mark, but I can't tell. Would it be something like "network controller" or "ethernet device"?) It doesn't appear in my network connections either. The LED on the card itself is dormant. Nothing happening. I figured at this point that it must not be fastened adequatly to the PCI slot. So I opened the case, took the card out, and fastened it back in nice in tight. No more give, and in the same slot it had always been in when operating properly. Still the same issue. I've done this a couple more times now, and with the same results. I just don't get it. I've followed the intrsuctions to the letter, and no results. Do I perhaps need to skip the cd and try to install the latest drivers for the card instead? Will that allow my PC to recognise it? I have another machine in my home, and can download a driver and transfer it by disc or flash drive to the other machine if need be.
View 1 Replies View RelatedI downloaded the drivers for the WMP54GS and I found the file "ikernel.ex_" is compressed in a format for CAB file extraction and decompression methods. It therefore cause the installation and Setup of Linksys drivers to fail because setup cannot decompress "ikernel.ex_". It was not compressed with Winzip's self extractor utility originally in the download package. The file was compressed in a Microsoft specific compression method for CAB archives, and surprisingly still an old DOS based compression method.
Linksys/CISCO has deliberately tampered with the download installers in an effort to force users to pay for out of warranty installation support. I might be further surprised that manual installation methods via device manager or update driver haven't been deleted from support pages forcing even more telephone calls to tech support.
So I recently took the WMP54GS ver 1.1 wireless adapter out of my old XP computer and put it in my new Vista 64bit computer. I successfully installed the adapter, downloaded the drivers (WMP54GS-v1.1_v4.102.15.53_Vista_dr), and unzipped them on my C drive to their Linksys Driver folder. When I go to find available networks it says "Windows cannot find any additional networks," and when I try to set up a wireless network it shows a blank window and says "an unexpected error has occurred." I can see the adapter in the device manager, so it obviously installed correctly.
View 5 Replies View RelatedWhere can i find driver for WPC54G ver.4 (FOUR). I looked for on official site, and there are drivers only for ver. 1, 2, 3, 3.1, 5, and 7! Where can i find drivers for ver.4?
My OS is MS Windows 2000 SP4.
So I lost the CD to my Cisco Linksys AE1200 wireless USB adapter and I can't seem to find the drivers for it ANYWHERE.
View 1 Replies View RelatedI have Linksys WAP54G router in my lab and Linksys Wireless LAN card WAP54G adapter in my client PC.
Which driver is used for LAN Card?
Here is my answer to the lack of support from Cisco:
[URL] I am presently using this driver to connect.
I cannot find a driver for this model. The linksys donwload site has version 1, 2, and 4... not ver.3
View 5 Replies View RelatedAre there any updated drivers for the AE1200 on windows 8? in win 8, I'm no seeing both bands - only 2.4Ghz and I'm only connecting at 54Mhz.
The disc that came with it has V5.100.68.46 which seem to be the lastest on the support site.
My husband got new computer. Installed the driver for his WUSB11 adapter and nada. Windows says the driver isn't installed. Linksys says its running
View 9 Replies View RelatedI just had to re-install an ancient version of windows XP Home edition on a crashed PC. I plugged in my WUSB54G v4 to the USB outlet, and the wizard came up to install the software. However, XP couldn't find any drivers for it, and I don't appear to have a CD with drivers on it. So, where on this site can I find them? When I go to the WUSB54G page, it just gives me manuals to dowload, but no software...
View 5 Replies View Relatedi just got a new computer and just got windows 7 for it. I was installing my wireless adapter when the error 211 came up. I saw on your website how to manualy install it but i cant do the first step which is: Search and download Windows 7 driver for your Adapter. I cant do this because i cant get on the internet on that computer without a wireless adapter because it is to far away from my routor. What can I do?
View 3 Replies View RelatedI am trying to install the Ae1200 on my notebook (windowsXP), which doesn't have a cd drive. I downloaded the driver from cisco page, and also copied setup disc from a 2nd comp onto a usb drive. Using both options, the wizards starts correctly, but then ends with error message saying "cannot find specified file"
View 2 Replies View RelatedI have been looking for 4 hours now for this driver.. Where to find it, that would make my day so much better
View 1 Replies View RelatedI don't know how to install this driver - I didn't see a .exe file or a "setup" icon
View 9 Replies View RelatedI am trying to update the driver for my WMP300N for Windows 7. I get a message from windows telling me that a registry key does not exsist. Is there a way to create the proper registry key or get a download that will update the registry? The download from linksys does not update the registry or create the key.
rdrussellCompTIA A+ 2007MCSE Windows 2003
I have an E1000 router and have updated the firmware to v2.1.02 Build 6. Also have the AE1000 Wireless-N Adapter and wanted to see if there were any new updates. According to this Linksys page the latest driver is Ver.3.1.12.0 (04/27/2012). I have downloaded the file and unzipped it to the desktop.
I am running Win 7 64-Bit so I opened this folder: C:UsersJOHNDesktopAE1000_Win7_3.1.12.0-WHQLWin7_64_v3.1.12.0
Which file will actually install the new driver:
netr28ux Security Catalog 9 kb; netr28ux Setup Info 11 kb; netr28ux.sys System File 1,563 kb; RaCoInst.dat DAT File 14 kb; RaCoInstx.dll Application Extension 320 kb
I had an antenna break on a WMP54g v 4.1 and I was able to replace it with a WMP54g v 4 but I'm not having a lot of luck getting the driver to install. This is on Win7 32 bit Home Premium. I assume this is due to the fact that I was using a newer and switched to an older piece of hardware and there is some driver issues. How to uninstall the old driver completely so I can start fresh I have tried everything I know to do and can't seem to get anywhere.
View 1 Replies View RelatedWhere I can find a driver for:WMP54g v2 for Vista SP2 32bit It used to work just fine, until I recently reinstalled Vista (and installed all the updates) and now my internet connection is "limited." This means that it connects, but is extremely slow and the connection goes in and out.Here are some random notes about my problem:
Nothing is disabled, there are not any conflicts, and the problem remains even if I restore the OS back to restore point that I created right after reinstalling Vista (and before doing anything else).If I hook the computer directly up to my netgear router via cable, Windows Update will download and install a more recent version of said driver (no improvement).Other laptops in the house have no problems with the wifi. I have turned off both my cable modem and wifi router several times.The adapter does connect to the internet, and the signal strength is "excellent", but if drill down to the properties of the connection, it says that IPV4 is connected to the internet, but IPV6 is "limited." This then results in a very weak connection to the internet that goes in and out. I have tried unchecking IPV6 per some recommendations, but that did not work. I have tried resetting everything (winsock, etc) via command prompt. Firewall is off, no antivirus software
I just installed windows 7 on my wifes new com and the device couldn't detect any connections using the default drivers (windows called it an nvidia wireless network card). I downloaded the drivers put them on her hd via flash drive and attempted to update the device drivers through the device manager but it says the drivers are already up to date. I uninstalled the device and windows called the device MCF-J415W and when I tried to update the drivers again it said the drivers were not correct. I'm not sure what is going on here and why linksys doesn't just have a .exe driver installer. I've had the same issue with my wife's computer when it had win xp except it didn't have any generic drivers to install. Also I tried selecting the driver from the list of pre-loaded drivers and found one for the exact device but it would not install those either.
View 2 Replies View RelatedI'm looking after any driver wich can operate the WUSB600N v2 under Windows 98 at an old computer who is not able to operate with WinXP.Is any "freak" there who knows wich driver can be used for it? (Perhaps as well an older driver from any other older CISCO wlan stick ... ?)
View 2 Replies View RelatedI recently bought and installed Windows 8 Pro and figured that there are no drivers available for the WMP54G Wireless Network Adapter (version 4.1)on this OS. What is the solution?
View 4 Replies View RelatedI have my brand new WUSB54GC and I can't install it. My operating system is Windows Me and every program on the CD accompanying my new adapter tells me "This version of Windows won't work" or words to that effect. My machine realizes something is there--indeed it knows there is a Linksys wireless adapter and even tells me it was manufactured by Cisco Co.--but it says NDIS cannot load the driver. Do I need a different driver?
View 6 Replies View RelatedI need the Windows XP WUSB54GC V.3 Driver!
All of the other threads on this forum have expired links to the driver. Where can I find it? I've looked for hours & the cisco website offers nothing for Windows XP for WUSB54GC Version 3
I'm trying to install the WMP110 PCI card in a new PC with a Win7 operating system. An error msg states that the system can't find a certain .dll (driver?) so I guess I need to update the driver for the Win7 system. One of the pages here has available downloads for the 110 but they only specify version 1.0 and/or version 2.0. Which on do I need to download and to what file?
View 2 Replies View RelatedI've been searching on linksys's website and was unable to locate the driver for AE1200 (Vista). They still sell the product in their online store, however the support seems to be removed. Where I can locate this? I reinstalled VISTA and require the drivers to have wireless/internet access.
View 1 Replies View RelatedI was looking for drivers to support the WMP600N. They are no longer hosted at url...
View 3 Replies View Relatedwpc11ver.3 / get driver for Ubuntu operating system?
View 2 Replies View Related