Linksys Wireless Adapters :: Wusb100 V.2 Windows 7 64 Driver Installation
Nov 30, 2011
I just installed windows 7 on my wifes new com and the device couldn't detect any connections using the default drivers (windows called it an nvidia wireless network card). I downloaded the drivers put them on her hd via flash drive and attempted to update the device drivers through the device manager but it says the drivers are already up to date. I uninstalled the device and windows called the device MCF-J415W and when I tried to update the drivers again it said the drivers were not correct. I'm not sure what is going on here and why linksys doesn't just have a .exe driver installer. I've had the same issue with my wife's computer when it had win xp except it didn't have any generic drivers to install. Also I tried selecting the driver from the list of pre-loaded drivers and found one for the exact device but it would not install those either.
View 2 Replies
ADVERTISEMENT
Jan 9, 2012
I am having trouble installing the wusb100 adapter on a Windows 7 Pro 64 bit machine. I have downloaded the updated files and when I go to install the software, I get to the section that says, "plug in the adapter." At that point, it says it can see the adapter and it sits for 3 minutes trying to complete the install. The I get error 211 which says the adapter is plugged in wrong and to try again. I notice that the adapter is set up with drivers in the Hardward Management area of Windows, however, I cannot access the adapter to set it up. Thoughts? I have also tried to manually install the drivers but they are installed. The trouble is I can't see the adapter.
View 2 Replies
View Related
May 4, 2011
I have just bought the aforementioned Wi-Fi adapter. I have installed driver for it, and in Device manager in General tab I can see that "This device is working properly". owever, the corresponding connection in Network Connections is disabled, and I can't enable it. When try to "Set up a new network" - I only see a blank window with no devices listed. Windows network Diagnostics says: There might be a problem with the driver for the Wireless Network Connection adapterDetected
View 1 Replies
View Related
Jan 29, 2011
Trying to install on Wi 7 32 bit. When starting driver installation I receive an ACCESS DENIED error and the driver does not install.
View 1 Replies
View Related
Dec 26, 2009
I have spend some time today trying to get my WMP600N-EU PCI Adapter installed. However up till now without any success. I run the installation CD with instructions, but the adapter is not found when I mount it into the PCI slot. I have tried both slots without success. Each time I get error 212.
View 8 Replies
View Related
Sep 5, 2012
I have a Linksys WUSB100 ver.2 which i'm using on my desktop (uptodate Windows 7) for over a year now. I never had any problems with it until about a week ago.
After starting the computer, it had no network-connection, nor could it find any network anymore . The led-light keeps flashing blue and the device gets pretty hot.
I've tried about everything, i think:
- I've tried to update the drivers, but the installed driver were already uptodate.
- I have re-installed the device with no effect.
- i've installed the device on 2 other computers; my Windows 7- laptop and my old Windows XP SP3-computer. The problems were the same there.
View 2 Replies
View Related
Oct 10, 2011
My WUSB100 which used to run perfectly suddenly started disconnecting. When I unpugged it, I realized that it was extremely hot. When I leave it to cool down and plug it again it works perfectly... for about two minutes. After two minutes it disconnects, no site loads, all downloads stop... etc. but the indicators on my computer do not even realize that there is a problem with the device... when I unplug it, I see the same result: too hot...
View 3 Replies
View Related
Jun 13, 2011
I have had a wusb100 on my computer for some time. Yesterday it kept showing that it had a very weak signal and wouldn't connect to the internet, although the other computers in the house were fine.. I've reinstalled it and the device manager shows it working fine. The tv screen icon advised me that there are wireless networks in the area but the adapter isn't connected. When I click on the pop up, it tells me that there are no wireless networks in range.
View 4 Replies
View Related
Jul 12, 2010
Here is my answer to the lack of support from Cisco:
[URL] I am presently using this driver to connect.
View 3 Replies
View Related
Mar 11, 2013
Are there any updated drivers for the AE1200 on windows 8? in win 8, I'm no seeing both bands - only 2.4Ghz and I'm only connecting at 54Mhz.
The disc that came with it has V5.100.68.46 which seem to be the lastest on the support site.
View 2 Replies
View Related
Nov 12, 2011
with my Linksys WRT150N router in "N-only" mode, the usb adapter WUSB100 doesn't connect. In the datasheet is written that it is B-G, but also N compatible..[URL] It connects only when the router is on "mixed mode" (B-G-N).
The device works great, the only thing is that it doesn't connect to N networks.... cause i think it is not N compatible. When i look for networks, Windows shows me that there is my N network, but when i click connect, after a few seconds, appears "impossible to connect".... but if i set the router on "mixed mode", no problems.
View 9 Replies
View Related
Jun 30, 2012
I have been looking for 4 hours now for this driver.. Where to find it, that would make my day so much better
View 1 Replies
View Related
Jul 31, 2009
I don't know how to install this driver - I didn't see a .exe file or a "setup" icon
View 9 Replies
View Related
Oct 21, 2010
I am trying to update the driver for my WMP300N for Windows 7. I get a message from windows telling me that a registry key does not exsist. Is there a way to create the proper registry key or get a download that will update the registry? The download from linksys does not update the registry or create the key.
rdrussellCompTIA A+ 2007MCSE Windows 2003
View 3 Replies
View Related
Apr 24, 2013
I have an E1000 router and have updated the firmware to v2.1.02 Build 6. Also have the AE1000 Wireless-N Adapter and wanted to see if there were any new updates. According to this Linksys page the latest driver is Ver.3.1.12.0 (04/27/2012). I have downloaded the file and unzipped it to the desktop.
I am running Win 7 64-Bit so I opened this folder: C:UsersJOHNDesktopAE1000_Win7_3.1.12.0-WHQLWin7_64_v3.1.12.0
Which file will actually install the new driver:
netr28ux Security Catalog 9 kb; netr28ux Setup Info 11 kb; netr28ux.sys System File 1,563 kb; RaCoInst.dat DAT File 14 kb; RaCoInstx.dll Application Extension 320 kb
View 5 Replies
View Related
Jun 20, 2011
I'm looking after any driver wich can operate the WUSB600N v2 under Windows 98 at an old computer who is not able to operate with WinXP.Is any "freak" there who knows wich driver can be used for it? (Perhaps as well an older driver from any other older CISCO wlan stick ... ?)
View 2 Replies
View Related
Dec 3, 2012
I recently bought and installed Windows 8 Pro and figured that there are no drivers available for the WMP54G Wireless Network Adapter (version 4.1)on this OS. What is the solution?
View 4 Replies
View Related
Jan 15, 2012
I need the Windows XP WUSB54GC V.3 Driver!
All of the other threads on this forum have expired links to the driver. Where can I find it? I've looked for hours & the cisco website offers nothing for Windows XP for WUSB54GC Version 3
View 1 Replies
View Related
Jan 7, 2012
I installed Windows 7 on my HP Pavillion assuming I could re-download a driver for my Linksys Wireless Adaptor Card discouvering that was not a good move. Any short cut/trick for getting a Windows 7 Driver for Linksys Wireless-G 2.4 PCI Adapter Model No VMP54G Wireless Monitor?
View 5 Replies
View Related
Jun 11, 2011
The last update was the following. 03/31/2010 Ver.3.0.10.0 Here we are well over a year later and no update at all. What is going on?
View 4 Replies
View Related
Feb 26, 2010
I have the above mentioned WMP54GS. And I just got a Windows 7 capable computer and got it installed. Now I can't find a driver that will work at all. Other than the Broadcom drivers that Windows installs naturally. (The Broadcom drivers are terrible. I play World of Warcraft and when before on my old Vista 64-Bit system I would get around 50 to 60 MS I now get 180 to 200. ) How to get this to work.
View 9 Replies
View Related
Apr 18, 2012
So, I bought a used WUSB600N Wireless Adapter and am having difficulty installing it. Of course, there was no installation CD to go with it, so I went to the website to download the drivers and updates and still can't get it to install.
View 1 Replies
View Related
Jul 2, 2011
When I insert the disc for my new AE1000, the setup opens automatically and begins to run. Before even letting me read the software end user license agreement, I get a screen that says the following: "Our Customer Support team can assist.Your Linksys Adapter was not successfully set up."I can not figure out any way to keep this message from showing up.
View 4 Replies
View Related
Jan 8, 2012
I have tried numerous times to install the disk and the adapter, but it always says it cannot locate the adapter. I know that the ports (I have tried them all) are working properly because they have been in use. I tried the chat. He suggested I call the 1-800 number. I don't have time to wait on hold forever, which I did anyway until I finally hung up.
View 5 Replies
View Related
Aug 20, 2007
I used several of these wireless nick's in various systems. Installation was always done without using Te Linksys monitor. Just the installation of the driver via hardware management.
View 4 Replies
View Related
May 28, 2011
It used to work, but just stopped. We have tried to reeinstall but it won't recognize the adapter. I cant click the next button to continue installation. I have changed USB ports and restarted the computer. I have unstalled Norton 360. But it still won't install.
View 3 Replies
View Related
Jun 22, 2011
My desktop can go to internet with ethernet wire on. After installing wireless adaptor driver, the adaptor shows green solid light on 'power' and blinking light on 'Link'. The Linksys icon shows 'Cannot associate with the access point'. I called Verizon and was told that the adaptor might have problem. I want to know if really the adaptor's problem or the adaptor installation problem.
View 1 Replies
View Related
Jul 13, 2012
I have a router attached to my Dell desktop running Windows 7 and am trying to install the AE2500. Instead of using the router, I want the AE-2500 to access my HotSpot wifi on my cell phone. I go through the AE2500 installation and Device Manager shows it is installed properly. However, I do not see the adapter in my list of available wireless connections and I'm unabley to disconnect my router connection. I keep clicking disconnect but it never does.
View 1 Replies
View Related
Jan 15, 2009
Where can i find driver for WPC54G ver.4 (FOUR). I looked for on official site, and there are drivers only for ver. 1, 2, 3, 3.1, 5, and 7! Where can i find drivers for ver.4?
My OS is MS Windows 2000 SP4.
View 3 Replies
View Related
Feb 12, 2007
I am surprised the Linksys support page does not provide the driver of WUSB54AG after I found I lost the CD. Where I can download it?
View 3 Replies
View Related
Apr 21, 2012
So I lost the CD to my Cisco Linksys AE1200 wireless USB adapter and I can't seem to find the drivers for it ANYWHERE.
View 1 Replies
View Related
Nov 22, 2012
I have Linksys WAP54G router in my lab and Linksys Wireless LAN card WAP54G adapter in my client PC.
Which driver is used for LAN Card?
View 6 Replies
View Related
Oct 28, 2006
Due to me losing the install CD for this card in a recent move, I am trying to download this driver from the LinkSys site and the process never starts, i.e. the download dialogue box comes up and I choose "save" because I need to sneaker-net the thing to another PC in the house.
View 3 Replies
View Related
