I installed Windows 7 on my HP Pavillion assuming I could re-download a driver for my Linksys Wireless Adaptor Card discouvering that was not a good move. Any short cut/trick for getting a Windows 7 Driver for Linksys Wireless-G 2.4 PCI Adapter Model No VMP54G Wireless Monitor?
View 5 RepliesHere is my answer to the lack of support from Cisco:
[URL] I am presently using this driver to connect.
Are there any updated drivers for the AE1200 on windows 8? in win 8, I'm no seeing both bands - only 2.4Ghz and I'm only connecting at 54Mhz.
The disc that came with it has V5.100.68.46 which seem to be the lastest on the support site.
I have been looking for 4 hours now for this driver.. Where to find it, that would make my day so much better
View 1 Replies View RelatedI don't know how to install this driver - I didn't see a .exe file or a "setup" icon
View 9 Replies View RelatedI am trying to update the driver for my WMP300N for Windows 7. I get a message from windows telling me that a registry key does not exsist. Is there a way to create the proper registry key or get a download that will update the registry? The download from linksys does not update the registry or create the key.
rdrussellCompTIA A+ 2007MCSE Windows 2003
I have an E1000 router and have updated the firmware to v2.1.02 Build 6. Also have the AE1000 Wireless-N Adapter and wanted to see if there were any new updates. According to this Linksys page the latest driver is Ver.3.1.12.0 (04/27/2012). I have downloaded the file and unzipped it to the desktop.
I am running Win 7 64-Bit so I opened this folder: C:UsersJOHNDesktopAE1000_Win7_3.1.12.0-WHQLWin7_64_v3.1.12.0
Which file will actually install the new driver:
netr28ux Security Catalog 9 kb; netr28ux Setup Info 11 kb; netr28ux.sys System File 1,563 kb; RaCoInst.dat DAT File 14 kb; RaCoInstx.dll Application Extension 320 kb
I just installed windows 7 on my wifes new com and the device couldn't detect any connections using the default drivers (windows called it an nvidia wireless network card). I downloaded the drivers put them on her hd via flash drive and attempted to update the device drivers through the device manager but it says the drivers are already up to date. I uninstalled the device and windows called the device MCF-J415W and when I tried to update the drivers again it said the drivers were not correct. I'm not sure what is going on here and why linksys doesn't just have a .exe driver installer. I've had the same issue with my wife's computer when it had win xp except it didn't have any generic drivers to install. Also I tried selecting the driver from the list of pre-loaded drivers and found one for the exact device but it would not install those either.
View 2 Replies View RelatedI'm looking after any driver wich can operate the WUSB600N v2 under Windows 98 at an old computer who is not able to operate with WinXP.Is any "freak" there who knows wich driver can be used for it? (Perhaps as well an older driver from any other older CISCO wlan stick ... ?)
View 2 Replies View RelatedI recently bought and installed Windows 8 Pro and figured that there are no drivers available for the WMP54G Wireless Network Adapter (version 4.1)on this OS. What is the solution?
View 4 Replies View RelatedI need the Windows XP WUSB54GC V.3 Driver!
All of the other threads on this forum have expired links to the driver. Where can I find it? I've looked for hours & the cisco website offers nothing for Windows XP for WUSB54GC Version 3
The last update was the following. 03/31/2010 Ver.3.0.10.0 Here we are well over a year later and no update at all. What is going on?
View 4 Replies View RelatedI have the above mentioned WMP54GS. And I just got a Windows 7 capable computer and got it installed. Now I can't find a driver that will work at all. Other than the Broadcom drivers that Windows installs naturally. (The Broadcom drivers are terrible. I play World of Warcraft and when before on my old Vista 64-Bit system I would get around 50 to 60 MS I now get 180 to 200. ) How to get this to work.
View 9 Replies View RelatedWhere can i find driver for WPC54G ver.4 (FOUR). I looked for on official site, and there are drivers only for ver. 1, 2, 3, 3.1, 5, and 7! Where can i find drivers for ver.4?
My OS is MS Windows 2000 SP4.
I am surprised the Linksys support page does not provide the driver of WUSB54AG after I found I lost the CD. Where I can download it?
View 3 Replies View RelatedSo I lost the CD to my Cisco Linksys AE1200 wireless USB adapter and I can't seem to find the drivers for it ANYWHERE.
View 1 Replies View RelatedI have Linksys WAP54G router in my lab and Linksys Wireless LAN card WAP54G adapter in my client PC.
Which driver is used for LAN Card?
Due to me losing the install CD for this card in a recent move, I am trying to download this driver from the LinkSys site and the process never starts, i.e. the download dialogue box comes up and I choose "save" because I need to sneaker-net the thing to another PC in the house.
View 3 Replies View RelatedI cannot find a driver for this model. The linksys donwload site has version 1, 2, and 4... not ver.3
View 5 Replies View RelatedI'm looking for the xp driver for the Compact Wireless-G USB Adapter Model Number: WUSB54GC. Linksys only has the vista one listed. Dwhere to find it?
View 5 Replies View RelatedMy husband got new computer. Installed the driver for his WUSB11 adapter and nada. Windows says the driver isn't installed. Linksys says its running
View 9 Replies View RelatedI am trying to install the Ae1200 on my notebook (windowsXP), which doesn't have a cd drive. I downloaded the driver from cisco page, and also copied setup disc from a 2nd comp onto a usb drive. Using both options, the wizards starts correctly, but then ends with error message saying "cannot find specified file"
View 2 Replies View RelatedI have a WM600N wireless N dual band, I downloaded the drivers off linksys site for my vista 32/64 OS, the file is zipped, I copied it to cd from a different pc then the one it goes onto, and cannot run it, I also opened up the zipped file and copied its contents onto a cd and still couldn't get the pc to see them as drivers.Anyway, after I download the zipped file, which I have to do on a second pc in order to put on a second pc, how do I do that? What do I do with the zipped river file in order to get vista to see it and install it.
View 4 Replies View RelatedI had an antenna break on a WMP54g v 4.1 and I was able to replace it with a WMP54g v 4 but I'm not having a lot of luck getting the driver to install. This is on Win7 32 bit Home Premium. I assume this is due to the fact that I was using a newer and switched to an older piece of hardware and there is some driver issues. How to uninstall the old driver completely so I can start fresh I have tried everything I know to do and can't seem to get anywhere.
View 1 Replies View RelatedWhere I can find a driver for:WMP54g v2 for Vista SP2 32bit It used to work just fine, until I recently reinstalled Vista (and installed all the updates) and now my internet connection is "limited." This means that it connects, but is extremely slow and the connection goes in and out.Here are some random notes about my problem:
Nothing is disabled, there are not any conflicts, and the problem remains even if I restore the OS back to restore point that I created right after reinstalling Vista (and before doing anything else).If I hook the computer directly up to my netgear router via cable, Windows Update will download and install a more recent version of said driver (no improvement).Other laptops in the house have no problems with the wifi. I have turned off both my cable modem and wifi router several times.The adapter does connect to the internet, and the signal strength is "excellent", but if drill down to the properties of the connection, it says that IPV4 is connected to the internet, but IPV6 is "limited." This then results in a very weak connection to the internet that goes in and out. I have tried unchecking IPV6 per some recommendations, but that did not work. I have tried resetting everything (winsock, etc) via command prompt. Firewall is off, no antivirus software
I have my brand new WUSB54GC and I can't install it. My operating system is Windows Me and every program on the CD accompanying my new adapter tells me "This version of Windows won't work" or words to that effect. My machine realizes something is there--indeed it knows there is a Linksys wireless adapter and even tells me it was manufactured by Cisco Co.--but it says NDIS cannot load the driver. Do I need a different driver?
View 6 Replies View RelatedI'm trying to install the WMP110 PCI card in a new PC with a Win7 operating system. An error msg states that the system can't find a certain .dll (driver?) so I guess I need to update the driver for the Win7 system. One of the pages here has available downloads for the 110 but they only specify version 1.0 and/or version 2.0. Which on do I need to download and to what file?
View 2 Replies View RelatedI've been searching on linksys's website and was unable to locate the driver for AE1200 (Vista). They still sell the product in their online store, however the support seems to be removed. Where I can locate this? I reinstalled VISTA and require the drivers to have wireless/internet access.
View 1 Replies View RelatedI was looking for drivers to support the WMP600N. They are no longer hosted at url...
View 3 Replies View Relatedwpc11ver.3 / get driver for Ubuntu operating system?
View 2 Replies View RelatedI am having trouble locating and installing my pci receiver card driver using windows 7 64 bit op sys
View 1 Replies View RelatedI've had the AE2500 adapter for a few weeks now, and it's worked fine up to this point. When I started up my computer today, however, it wouldn't connect to the network. I've uninstalled the software that came with the adapter and I've tried to reinstall it. However, when I got to the installation step to insert the adapter, the computer would not identify the AE2500. I've tried updating the drivers through the device manager, but I received an error stating that "a device attached to the system is not functioning".
View 6 Replies View RelatedTrying to install WMP54G v4.0 on XP SP3. I have tried all three PCI slots. Removing driver RT2500.SYS system will boot. Put it back and BSOD Error:driver_irql_not_less_or_equal
View 8 Replies View Related