Linksys Wireless Adapters :: Enabling WUSB100 V2 On Windows 7?
May 4, 2011
I have just bought the aforementioned Wi-Fi adapter. I have installed driver for it, and in Device manager in General tab I can see that "This device is working properly". owever, the corresponding connection in Network Connections is disabled, and I can't enable it. When try to "Set up a new network" - I only see a blank window with no devices listed. Windows network Diagnostics says: There might be a problem with the driver for the Wireless Network Connection adapterDetected
View 1 Replies
ADVERTISEMENT
Jan 9, 2012
I am having trouble installing the wusb100 adapter on a Windows 7 Pro 64 bit machine. I have downloaded the updated files and when I go to install the software, I get to the section that says, "plug in the adapter." At that point, it says it can see the adapter and it sits for 3 minutes trying to complete the install. The I get error 211 which says the adapter is plugged in wrong and to try again. I notice that the adapter is set up with drivers in the Hardward Management area of Windows, however, I cannot access the adapter to set it up. Thoughts? I have also tried to manually install the drivers but they are installed. The trouble is I can't see the adapter.
View 2 Replies
View Related
Nov 30, 2011
I just installed windows 7 on my wifes new com and the device couldn't detect any connections using the default drivers (windows called it an nvidia wireless network card). I downloaded the drivers put them on her hd via flash drive and attempted to update the device drivers through the device manager but it says the drivers are already up to date. I uninstalled the device and windows called the device MCF-J415W and when I tried to update the drivers again it said the drivers were not correct. I'm not sure what is going on here and why linksys doesn't just have a .exe driver installer. I've had the same issue with my wife's computer when it had win xp except it didn't have any generic drivers to install. Also I tried selecting the driver from the list of pre-loaded drivers and found one for the exact device but it would not install those either.
View 2 Replies
View Related
Sep 5, 2012
I have a Linksys WUSB100 ver.2 which i'm using on my desktop (uptodate Windows 7) for over a year now. I never had any problems with it until about a week ago.
After starting the computer, it had no network-connection, nor could it find any network anymore . The led-light keeps flashing blue and the device gets pretty hot.
I've tried about everything, i think:
- I've tried to update the drivers, but the installed driver were already uptodate.
- I have re-installed the device with no effect.
- i've installed the device on 2 other computers; my Windows 7- laptop and my old Windows XP SP3-computer. The problems were the same there.
View 2 Replies
View Related
Oct 10, 2011
My WUSB100 which used to run perfectly suddenly started disconnecting. When I unpugged it, I realized that it was extremely hot. When I leave it to cool down and plug it again it works perfectly... for about two minutes. After two minutes it disconnects, no site loads, all downloads stop... etc. but the indicators on my computer do not even realize that there is a problem with the device... when I unplug it, I see the same result: too hot...
View 3 Replies
View Related
Jun 13, 2011
I have had a wusb100 on my computer for some time. Yesterday it kept showing that it had a very weak signal and wouldn't connect to the internet, although the other computers in the house were fine.. I've reinstalled it and the device manager shows it working fine. The tv screen icon advised me that there are wireless networks in the area but the adapter isn't connected. When I click on the pop up, it tells me that there are no wireless networks in range.
View 4 Replies
View Related
Nov 12, 2011
with my Linksys WRT150N router in "N-only" mode, the usb adapter WUSB100 doesn't connect. In the datasheet is written that it is B-G, but also N compatible..[URL] It connects only when the router is on "mixed mode" (B-G-N).
The device works great, the only thing is that it doesn't connect to N networks.... cause i think it is not N compatible. When i look for networks, Windows shows me that there is my N network, but when i click connect, after a few seconds, appears "impossible to connect".... but if i set the router on "mixed mode", no problems.
View 9 Replies
View Related
Aug 29, 2011
Called earlier the guy is really impatient and just wanted my credit card detail to install some remote software for technicians to fix from their end. Ethernet connection is fine1. wireless with iphone and ipad is conected with correct password and strong signal. But 99% of the time there is not connection while signal is still strong.2. wireless connection with another laptop using Cisco Network USB adapter WUSB100. After wireless work detected and enter the same security key as ipad used. Could not work.
View 2 Replies
View Related
Dec 24, 2011
making Windows 7 do what it's supposed to? Seriously, there needs to be a button you can click to roll it completely back to XP.
View 1 Replies
View Related
Jan 29, 2011
Trying to install on Wi 7 32 bit. When starting driver installation I receive an ACCESS DENIED error and the driver does not install.
View 1 Replies
View Related
Apr 7, 2013
i cant install it in the windows 8 its tall me 'the data is invold' and i try all put out and bring in all?
View 2 Replies
View Related
Mar 7, 2012
I am having problems installing this with the cd that was given, so I went on the site to DL the drivers, i downloaded the zip file, but when i open it there is no setup.exe. Do i need to exract the contents to a certain file?
View 1 Replies
View Related
Jul 9, 2012
We've been getting broadband through a WRT54G v2.2 router into numerous computers with WUSB54G v4 wireless adapters into winXP PC's for years now, but I've recently got a 64bit Win7 PC which needs internet connection. I spent all day today trying to find drivers, workarounds and god knows what for the WUSB54G v4 which (I'm pretty sure now ) don't exist for a 64bit system.
How do I get internet into this Windows 7 PC? Will I just need to get a new adapter? (and will it be compatible with the current router?) I don't especially want to get a new router and several new adapters just because we have one new Win7 PC... If I do just need to get a new adapter, in terms of performance/compatibility?
Oh, and how ancient is the hardware we actually have, and does/will it effect the internet in any way?
View 2 Replies
View Related
Jul 12, 2010
Here is my answer to the lack of support from Cisco:
[URL] I am presently using this driver to connect.
View 3 Replies
View Related
Jan 20, 2012
Just picked up a WEC600N Wireless N Express Card and installed. It's working, but it's connected at 54mb and I cannot find out how to configure the wireless settings. I think I am using the Intel Proset wireless software.
Also, router is a netgear wndr3700.
View 1 Replies
View Related
Jul 23, 2012
I installed Windows 7 Ultimate on my computer, and I cannot get my Linksys to work on it, the light doesn't light but it shows up in device manager. I've tried using Vista 32-bit drivers but it doesn't work at all, I am thinking it isn't a driver issue at all because it shows that the driver is up to date.
View 1 Replies
View Related
Aug 26, 2011
I have tried to install a usb network adapter wusb100 ver.2 under win7 x64 and win7 x64 sp1(two different machines). I have installed and downloaded the latest drivers ( Driver11/09/2009 Ver.3.0.3.0 (64-bit)). Device manager reports everything is fine, but i can't find the adapter anywhere in the Network and Sharing Center on both machines, not even if i run ipconfig it won't show up. As a result of course there is no wireless connection available. Although adapter has worked fine when tested under win7 x32. But win7 x32 is not my case.
View 1 Replies
View Related
Jun 5, 2011
Is there a driver or will there be a driver to work with WUSB300n adapter running Windows 7 64-bit Home Pro edition ?
View 1 Replies
View Related
Oct 23, 2009
I've noticed that my WUSB54GSC is completely unsupported by Windows 7, nor has Linksys published any new drivers. From browsing these forums and the internet, many other Linksys users are experiencing much trouble with getting their wireless adapters to work with Windows 7.So please, Cisco, publish new Windows 7 drivers... I'm completely taken back that there is nothing to do with Windows 7 anywhere on your site, and disappointed at none of your products being ready for the new Operating System. Im stuck with a useless router. I've tried for hours and hours to try random fixes i found on the internet, force install drivers preloaded on Windows 7, and force install the out of date Linksys drivers....to no avail. I still need to activate my Windows 7 online, and i can't activate it if my wireless adapter doesn't work. I will keep this in mind when i purchase routers/adapters in the future. I've already tried using the ra-link drivers to get my adapter working, but every time i get a "code 10" error stating that "This device cannot start". Any driver that i do install from Windows 7 pre loaded drivers ends up giving me that error. And all the out-of-date linksys drivers don't even successfully install the drivers...
View 9 Replies
View Related
Dec 27, 2012
After update at win 8 I had problems with the functionality of the WUSB300N. I installed manually the old driver and I have now the limited network and I can not use it.
View 2 Replies
View Related
May 2, 2010
Does the AE1000 Adapter support Windows Pro 64 bit? If it doesn't, is there any Linksys adapter that does?
View 9 Replies
View Related
Nov 16, 2009
So I have a (relatively) old WMP54GX PCI adapter that used to work great under XP. However I moved and was able to put my computer right next to my router so I no longer needed to use the adapter. Fast forward about three years later, I now have Windows 7 installed and need to use to adapter again, but unfortunately it doesn't seem to be working. The drivers never seem to finish installing after reboot, and I'm not sure what I should be doing. I noticed the most "recent" driver was released in 2006, so it doesn't look like there's even one available for Vista, let alone Windows 7.
Am I looking in the wrong place for the drivers, or is Linksys really not supporting their slightly older hardware on new operating systems? If there are no drivers available, any ways to get it working in Windows 7?
View 8 Replies
View Related
Mar 11, 2013
Are there any updated drivers for the AE1200 on windows 8? in win 8, I'm no seeing both bands - only 2.4Ghz and I'm only connecting at 54Mhz.
The disc that came with it has V5.100.68.46 which seem to be the lastest on the support site.
View 2 Replies
View Related
Sep 3, 2011
So I just bought and recieved a new computer with the wireless WMP600N.
I turned the computer on and a had small lags every 5th second or so which, even though they are small, are pretty annoying. I then tried to look for a reason as to why this happens and what i found out was that if a turn off the wireless internet connection the lag spikes stops and if I turn it on they occour.
My computers specs are:
I7 2600k 4x 3,40ghz
Nvidia geforce GTX 570
8 gb 1600mhz RAM
WMP600N wireless-N PCI
Windows 7 64xbit
View 2 Replies
View Related
Jan 28, 2011
when i install using the CD it stops after i plug in the adapter with a 211 error telling me to replug it in blah blah. i tried to manually install the drivers from the CD. it dose this successfully but it wont pick up any net works. and when i use the network app that came with the CD it tells me it is not installed right. what is going on it says on the box windows vista compatible.
View 1 Replies
View Related
Nov 8, 2009
I am running Windows 7 with the WUSB600N (v.2). Here is how I got it to work.The driver support is not a .exe. You will have to install it yourself...but it's not a big deal.Download the Windows 7 driver for your OS version from the Linksys Support page.Save it to the desktop and then unzip it to the desktop so you can find it easier.Once unzipped you will see 3 folders: Mac, Win7 32 and Win7 64. Choose accordingly.What I did was install it through the "Device Manager". (Right click "My Computer", choose "Manage", then Device Manager",or use the "Search Bar under the Start Menu...whatever. Once you are in the Device Manager...
1. Make sure your WUSB600N is inserted in your computer.
2. Navigate down to "Network Adapters" If you see your WUSB600N adapter...great! Your halfway home!
3. Right click on the "Linksys WUSB600N Adapter.
4. Choose the option to " Update Driver Software"
5. Choose "Browse My Computer for Software"
6. Navigate to the desktop and choose the folder that contains the name of your Windows 7 platform.
7. It should update but, HOLD ON! We are not done yet!!!
In order for it to start transmitting in that shiny new 5GHZ band, you must go into "Network and Sharing Center". Once there, look on the left hand side of the main window and you will see "Change adapter settings"Go there. You should see here that your existing adapter is still working (enabled) and your new Linksys WUSB600N has a big fat red "X" under it (disabled).Right click on your existing adapter and choose, "DISABLE".Then, right click on the WUSB600N adapter and choose "ENABLE".The last thing you should have to do is choose the network you want to connect to (for me it was the 5GHZ one) ..and Viola!!
View 5 Replies
View Related
Jun 30, 2012
I have been looking for 4 hours now for this driver.. Where to find it, that would make my day so much better
View 1 Replies
View Related
Jan 24, 2013
I had this card working on this notebook with Windows XP, but with only 256mb ram it ran too slow. So I went back to 2000 on it. But I can't get the card to work, I've tried using the setup, the link light on the card does flash on and off. But in the linksys program just says no association with access point and says WPC54GS is inactive. I tried just installing the driver when it detects it but that didn't work. Also I try to start the wireless configuration and just get error 1747 the authentication service is unknown. What do I need to do to get the card working on here so I have internet access?
View 5 Replies
View Related
Nov 16, 2009
I have a Linksys wmp200 wireless adapter in my PC, and will installing windows 7 pro 64bit in a few days. I was wondering, does the wmp200 support Windows 7 64bit? If not, how can I get it working? It is very important that the internet works on this PC, so im hoping for minimal issues.
View 3 Replies
View Related
Jul 31, 2009
I don't know how to install this driver - I didn't see a .exe file or a "setup" icon
View 9 Replies
View Related
May 26, 2009
So I bought the WUSB54GC wireless adapter today. My computer's OS is Windows XP Professional. Whenever I load the disk and click "Start Setup" a window pops up that says "This version of Windows in not supported."
View 9 Replies
View Related
Oct 21, 2010
I am trying to update the driver for my WMP300N for Windows 7. I get a message from windows telling me that a registry key does not exsist. Is there a way to create the proper registry key or get a download that will update the registry? The download from linksys does not update the registry or create the key.
rdrussellCompTIA A+ 2007MCSE Windows 2003
View 3 Replies
View Related
Jan 1, 2013
Windows 8 on a desktop with Linksys AE3000 wireless adapter. I sometimes start losing packets when pinging to my router. Here is an example:[URL] Now using my tablet with builtin wireless adapter (same location as the desktop) I got this result [URL] the problem is not my router If I restart Windows 8 desktop, the problem is fixed and pings are back to normal. However, next day I get the same problem back (until I restart Windows again).I have tried three different wireless adapters but it's the same problem with all of them.
View 2 Replies
View Related
