Linksys Wireless Router :: WUSB100 - Wi-Fi Down Almost All The Time
Aug 29, 2011
Called earlier the guy is really impatient and just wanted my credit card detail to install some remote software for technicians to fix from their end. Ethernet connection is fine1. wireless with iphone and ipad is conected with correct password and strong signal. But 99% of the time there is not connection while signal is still strong.2. wireless connection with another laptop using Cisco Network USB adapter WUSB100. After wireless work detected and enter the same security key as ipad used. Could not work.
View 2 Replies
ADVERTISEMENT
Nov 12, 2011
with my Linksys WRT150N router in "N-only" mode, the usb adapter WUSB100 doesn't connect. In the datasheet is written that it is B-G, but also N compatible..[URL] It connects only when the router is on "mixed mode" (B-G-N).
The device works great, the only thing is that it doesn't connect to N networks.... cause i think it is not N compatible. When i look for networks, Windows shows me that there is my N network, but when i click connect, after a few seconds, appears "impossible to connect".... but if i set the router on "mixed mode", no problems.
View 9 Replies
View Related
Sep 5, 2012
I have a Linksys WUSB100 ver.2 which i'm using on my desktop (uptodate Windows 7) for over a year now. I never had any problems with it until about a week ago.
After starting the computer, it had no network-connection, nor could it find any network anymore . The led-light keeps flashing blue and the device gets pretty hot.
I've tried about everything, i think:
- I've tried to update the drivers, but the installed driver were already uptodate.
- I have re-installed the device with no effect.
- i've installed the device on 2 other computers; my Windows 7- laptop and my old Windows XP SP3-computer. The problems were the same there.
View 2 Replies
View Related
Oct 10, 2011
My WUSB100 which used to run perfectly suddenly started disconnecting. When I unpugged it, I realized that it was extremely hot. When I leave it to cool down and plug it again it works perfectly... for about two minutes. After two minutes it disconnects, no site loads, all downloads stop... etc. but the indicators on my computer do not even realize that there is a problem with the device... when I unplug it, I see the same result: too hot...
View 3 Replies
View Related
Jun 13, 2011
I have had a wusb100 on my computer for some time. Yesterday it kept showing that it had a very weak signal and wouldn't connect to the internet, although the other computers in the house were fine.. I've reinstalled it and the device manager shows it working fine. The tv screen icon advised me that there are wireless networks in the area but the adapter isn't connected. When I click on the pop up, it tells me that there are no wireless networks in range.
View 4 Replies
View Related
May 4, 2011
I have just bought the aforementioned Wi-Fi adapter. I have installed driver for it, and in Device manager in General tab I can see that "This device is working properly". owever, the corresponding connection in Network Connections is disabled, and I can't enable it. When try to "Set up a new network" - I only see a blank window with no devices listed. Windows network Diagnostics says: There might be a problem with the driver for the Wireless Network Connection adapterDetected
View 1 Replies
View Related
Jan 9, 2012
I am having trouble installing the wusb100 adapter on a Windows 7 Pro 64 bit machine. I have downloaded the updated files and when I go to install the software, I get to the section that says, "plug in the adapter." At that point, it says it can see the adapter and it sits for 3 minutes trying to complete the install. The I get error 211 which says the adapter is plugged in wrong and to try again. I notice that the adapter is set up with drivers in the Hardward Management area of Windows, however, I cannot access the adapter to set it up. Thoughts? I have also tried to manually install the drivers but they are installed. The trouble is I can't see the adapter.
View 2 Replies
View Related
Nov 30, 2011
I just installed windows 7 on my wifes new com and the device couldn't detect any connections using the default drivers (windows called it an nvidia wireless network card). I downloaded the drivers put them on her hd via flash drive and attempted to update the device drivers through the device manager but it says the drivers are already up to date. I uninstalled the device and windows called the device MCF-J415W and when I tried to update the drivers again it said the drivers were not correct. I'm not sure what is going on here and why linksys doesn't just have a .exe driver installer. I've had the same issue with my wife's computer when it had win xp except it didn't have any generic drivers to install. Also I tried selecting the driver from the list of pre-loaded drivers and found one for the exact device but it would not install those either.
View 2 Replies
View Related
Oct 26, 2011
I have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies
View Related
Oct 18, 2012
Is there a way to find out if I have purchased a genuine wusb100 adapter? Can I find out by looking at the hardware. I bought from ebay.
View 1 Replies
View Related
Mar 20, 2012
i recently bought an E1200 to replace my old Linksys router that died. I set it up smoothly and i can connect any device to it easily. But i have one major problem with it, it always disconnects every time at 1am or something. I usually leave my PC to sleep mode and when i wake up i just take it off sleep mode, now i had this router for about 4 days and every morning when i turn the PC on the internet connection is gone/disconneted. I cant repair it from the Network Sharing Center, i need to restart it THEN repair it and it always says that the Local Area Connection is disabled even though i didnt even touch any of it. I tried putting it in sleep mode in the morning and then turning it on again but the internet is still connected, it just happens when i go to sleep at night, really weird.
View 3 Replies
View Related
Aug 31, 2009
I have a brand-new WRT160N router (just installed FW v3.0.02) that I am using in mixed mode, 20MHz only, Channel 11, not filtering anonymous requests, beacon at 2306, RTS at 2307, fragmentation at 2346, MTU at 1400.
These settings bring the response from a simple ping command over the wireless network down to approximately 6ms on average, which is good. However, when I still noticed inconsistency with my internet response over wireless, I decided to do a test.
By simply running the "ping" command on 192.168.1.1 (the router address) over the wireless network repeatedly (approx 3 seconds between commands), I can see that approximately every 65 seconds or so, router response time increases to over 100ms for a few seconds, then decreases down to 6 ms or so for another 65-70 seconds. See the chart below. The interval looks pretty consistent to me, with the exception of one stretch where it goes for over two minutes without a spike. I see this pattern regardless of what else I'm doing over the network. I do not see this behavior running the same test when physically wired to the router (ping response time is a flat line at 0ms).
View 4 Replies
View Related
Nov 15, 2011
I bought a e4200 router about 3 weeks ago and after a power outage it decided it didnt like being connected to the internet anymore. So i got on the phone with cisco they determined the router was no good, mind you my laptop would connect wired. So they sent me a "refurbished" one, so i set it up. The new setup was wonky because it said the same message "Your connected to your router but..." then after trying to get the connection its self and failing it came up with "congratulations you are now connected to the internet". That lasted 3hrs and 45mins then died, so i went upstairs to power cycle it, it decided to connect with the old settings. That lased 25mins then died, so i reset it and reconfigured the router. Wouldnt connect, i checked my mac address and it was using my wireless one and kept turning on my wireless connection durring the install. So i cloned my wired mac address and got the internet for roughly an hour... then it died. So i reset it again and kept the wifi off got it going and decided to go to sleep. I wake up and its still working after 8hrs, i go down stairs with my tablet and i dies again. This time it refuses to reconnect, refuses to reset back up just doesnt want to work.
View 3 Replies
View Related
Sep 2, 2011
I keep trying to set access restrictions for my wrt54g router for time. There is no 12 for time so I'm selecting 11:55 pm to 6am but I keep getting an error message of, "end time must be bigger then begin time." I get this no matter if I select 9pm, 10pm, etc.
View 3 Replies
View Related
Aug 28, 2008
Setting date and time on WRT110
View 9 Replies
View Related
Nov 19, 2011
At home I have 3 computers and 2 mobile phones that connects to wifi network.Often, if I open up one of the computers that is sometimes off (laptop), then the network connection doesn't work anymore. I can still see the network in wifi choices on any device, but it won't connect to the Internet.
View 9 Replies
View Related
Mar 4, 2013
i have router lynksys WRT120N and the latest 1.0.0.7 firmware. And the problem occured frequently. At about 13.00 i went out, wifi was working okay. At around 18.00 i returned home and i was trying to connect to the wifi with my android phone, and suprisingly it did not work. I tried on my laptop and on a android tablet. It did not work. The only thing that i could figure it out is to reset the router. I checked the settings, and there was no access policy e.g. time based access blocking.
View 5 Replies
View Related
May 7, 2011
I have the e4200, well, I have had 2 e4200s and they both have had the same issue.I set up my e4200 manually with wpa2 security and I was getting about -50db rssi at my recieving device. Everything tested/worked fine and I went on with life.Without moving the router or anything else over the course of about 3 days the signal had dropped to -71dbm. I power cycled the router and it went back to -53dbm. I tried multiple channels and the same thing keeps happening.The same thing happened a few more times, I contacted tech support, but they just had me change channels.I took the router back for an exchange and the new one has done the same thing in LESS time!The router has the latest firmware and I keep it on an elevated plastic stand to prevent overheating.
View 6 Replies
View Related
Jul 6, 2012
I have a 2 computer connected to the WRT54GS which is connected to the RCA DCM 425. It was initially fine, however now the internet is disconnecting at an absurd rate, at least 3 within an hr, sometimes more, and the only way it would reestablish connection is by unplugging and replugging.I have called time warner's customer support and they said it was because of the router. I have searched through various threads and saw and some had similar problems, but they were related to wireless instead of wired ( my case) so is there some settings i can change within the linksys to minimize the amount of disconnections? Becaused based on the log from the RCA,it seems that they are not reading each other too well. Are there any other routers that may establish a connection better than the GS?
View 4 Replies
View Related
Nov 17, 2012
We recently upgraded to the linksys ea4500 router. My brother plays call of duty on the PS3 and I play call of duty on the Xbox. The issue is we cannot figure out how to have open NAT on both consoles at the same time. I've read multiple support guides, but they don't seem to work. I'm pretty sure it's possible since I've gotten both to be open after reseting the router. The problem is it doesn't stay open on both for very long. We can get one to be open, while the other is stuck on moderate.
We've tried port range forwarding and port range triggering. By default, the PS3 is open. To get the Xbox to open, i disable 'filter anonymous requests' in the security settings, and disable UPnP. (With UPnP enabled, the is ps3 is open & xbox is moderate, with it off, xbox is open and ps3 is moderate).
View 1 Replies
View Related
Dec 21, 2011
Since lion is there for a while, it is still not possible to make a time machine backup on an USB hdd that's connected to the router. is Cisco coming with an firmware update?
View 9 Replies
View Related
Sep 25, 2011
i cant seem to change my dhcp lease time even though i change my Client Lease Time to 1 day.
Firmware Version:v1.0.06 build 001 Apr 29 2011 11:08:40Boot Code Version:v0.03Firmware Verification:Current Time:Sun, 25 Sep 2011 10:15:32 PMInternet MAC Address:Host Name: Domain Name:
View 6 Replies
View Related
Jul 3, 2012
How to block a specific website with a specific time (office hours) for example "facebook" I want to block facebook within 8AM - 12Noon then 12-1 they can access the website, then 1-4 block again the website .
View 3 Replies
View Related
Feb 29, 2012
I have a E3000 with newest firmware that has a VOIP by Velcom. It's a Grand stream HT–286.My device is working perfectly with the router. Can call and recieve calls. the caller ID (Name and number that appears is accurate). The only problem is the caller ID's time and date are always wrong.When I unplug device, it goes back to Jan 1 and time 12:00am.Any call I then get is wrong.
In the router, I've enabled SIP ALG. And the firewall is only filtering ident (port 113) and Anonymous Internet requests.The device has a hard coded internal IP (192.168.123.110). and I reserve the IP using mac filtering.The device has an administration page that is unavailable to users as it's locked by a password. On this page has an NTP server setting that the device uses to get it's time/date.I see on the information page of the device that iot's registered to a sip server.The company is saying that it's a firewall issue. I'm not too sure how to proceed.
View 3 Replies
View Related
Sep 20, 2012
With M10, I cannot restrict internet access for specific time period. Parent Control feature doesn't satisfy the situation, and there is no build-in access-policy in web-based setup. Are you going to upgrade firmware or Cisco Connect with more flexible access time control?
View 1 Replies
View Related
Oct 9, 2012
Just got an EA6500 - updated to the latest available firmware.I've attached 2 x WD NAS and 1 x WD via USB to the unit.Everytime AFTER I finished running Time Machine on the MacBookPro (writing to one of the WD NAS), I can no longer login to the router neither from the local IP address nor the cisco cloud connect. The error message that I get (loosely phrased) is: can't connect to Router. Please ensure the router is connected to the internet.
View 2 Replies
View Related
Jul 24, 2011
getting the E1200 and was reading over the PDF user's guide re. guests. It says "The [b]first time[/b] your guest tries to access the Internet through a web browser, they will see the Guest access screen To continue, they must enter the password you provided in the Password field, then click LoGIn." Should I take this to mean after the first time it won't prompt them again for a password? I was wondering If my roommate wants to use my internet account if she can use the guest account every time without a password or not. If she has to enter it each time it might be easier to just add her computer to the network.
View 2 Replies
View Related
Oct 16, 2011
I've just confirmed that everytime I try to stream music from my MacBook Pro (iTunes) that is connected to my WiFi network using the 5GHz mode (channel width is Auto, channel: Auto (DFS)) to a couple Airport Express cubes are connected via the 2.4 GHz WiFi (channel width: Auto, channel: 10) the E4200 router reboots. When I set the MBP to use the 2.4 GHz mode I can stream music without causing the E4200 to reboot. The E4200 is running firmware 1.0.03.
View 9 Replies
View Related
Nov 9, 2012
Each time I'm rebooting my E3200 device my ping to my ISP is 20ms. Few hours later the ping goes up to 300-500ms.Than I reboot again and the ping is going down to 20ms again.
View 5 Replies
View Related
Jul 9, 2012
dlna server of ea4500 does not supports time seeking? No rewind? I have tryed to plug usb-flash with video files for testing before buying an external HDD and... REALLY no time seeking?
View 3 Replies
View Related
Aug 15, 2012
I'm looking to buy an EA3500. I want to hook an external drive to the USB port and use it as a Time Capsule drive with Mountain Lion. Is this supported?
View 5 Replies
View Related
Jul 27, 2011
how to change the time zone, the current time always show Firmware Version:1.01.6Current Time:Sat, 1-Jan-2000 00:08:40 and can't connect PPPOE
View 1 Replies
View Related
Jun 22, 2012
How to set up a time machine MacBook Air (Mac OS X 10.7.4) on EA4500 (2.0.37) with the disk WD MyBook USB 2TbThe disk is divided into two sections 500 and 1500, 500 by the time machine.After the command (defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1) time machine saw the network drives, but can not be backed up (not supported AFP)
View 8 Replies
View Related
