Linksys Wireless Router :: Wrt310N - Trying To Forward A Port?
Nov 25, 2011Having a devil of a time trying to forward a port on my router. Did everything instructions said, but it still doesn't work. What can I do.
View 2 Replies
ADVERTISEMENT
Linksys Wireless Router :: How Many Port Forwarding Entries Does WRT310N Support
Dec 13, 2011I want to upgrade my router but I need a router that supports more port forwarding entries for my applications. I have my eye on the WRT310N router but I need to know how big its port forwarding table is.
View 2 Replies View RelatedLinksys Wireless Router :: E1000 Can't Forward A Port
May 15, 2013I have my router set up and life was good. i now want to forward a port. i go into apllications/gaming put the application name, the port i want to forward and click enable. Save changes and i get a changes save message. When the browser goes back to the applications/gaming screen no port shows as being forwarded. If i go to canyouseemenow.org the port shows as being closed.
View 3 Replies View RelatedLinksys Wireless Router :: How To Port Forward An EA3500
Aug 7, 2012Windows 7 64 bit / Linksys EA3500 / (2) FosCam F18910W IP Camera’s I just installed a new EA3500. (Should I have purchased the 4500)?I need to set up port forwarding to enable wireless use of the IP cams with my iPhone. I had this all set using my former router, but it died.how to to port forward this Linksys EA3500?
View 2 Replies View RelatedLinksys Wireless Router :: E4200 - Port Forward To Broadcast For WOL?
Jan 25, 2011Some routers are able to forward to broadcast directly by sending a port to 192.168.1.255, other's I've been able to trick by forwarding to 192.168.1.254 and then editing the arp table with 192.168.1.254 <-> ff:ff:ff:ff:ff:ff. Is there any way I can edit the arp table of the E4200? Is there a way to telnet in or get a console connection?
View 9 Replies View RelatedLinksys Wireless Router :: WRT54G Port 80 Forward Fails
Sep 2, 2011I encounter a problem setting up port 80 forwarding on WRT54g router.
Configuration:
- Numericable modem
- WRT54G router : portforwarding configured, accepting anonymous internet traffic, no DMZ, no port-triggering... in fact everything is fine except for ports 80/443
- Linux Ubuntu server + Apache2 listening *:80 and/or *:15001
1/ Situation 1: Apache listening on server's *:15001
-> Accessing from Internet (outside LAN) works very fine.
-> Portforwarding of router:15001 to server:15001 (TCP) works fine.
2/ Situation 2: Apache listening on server *:80
-> Accessing from Internet (outside LAN) FAILS.
-> Portforwarding of router:80 to server:80 (TCP) doesn't work. Diagnostic using the client machine's firewall tool showed the request doesn't get any return... no traffic back at all.
The system being fully operational when using port:15001 shows the problem does not come from server configuration.I still have to try a bypass of my router by plugging the modem directly on the server eth card.
-> If that works it would definitely prove the problem comes from the router, precisely the portforwarding feature as applied to port:80.
My guess is the following:
- As WRT54g router's remote administration interface is precisely set to listen 80/443 ports.
- As I still did not disable remote administration as I need it, but I will come to such extremities (very soon in fact as despair is gaining me
- Looks like WRT54g is unable to forward port 80 as this is it's remote administration port. You can set it up, but it just won't work, and there's no warning
Solutions?
- Disable remote administration? (will it work ? cause I would not risk to disable it for nothing...)
- Have remote administration litening on different ports than 80/443?
- Is my diagnostic correct ? (at least, does it seems to be...)
- (shall I get another device? Update to alternative firmware project?)
PS : I could be asked for ifconfig/netstats/hdw-fmw version, I would post later as I do not have access now.Looks like to me it is recurrent issue on WRT54g (maybe I'm wrong and just an **bleep** in LAN/WAN configuration which is highly possible)
Linksys Wireless Router :: WRT55AG V2 Cannot Port Forward To A Web Server
Mar 19, 2007I am trying to set up a web server behind WRT55AG router. I have read many forums where people are having the same problem, but none explain how to fix issue. The router will not forward any port to the server. Any attempt to access the server from outside my local network just brings me to the login screen of the router. I have tried port forwarding port 80 and 10080 and both do the same thing. Also, I have the firewall, remote management, and UPnP turned off
View 3 Replies View RelatedLinksys Wireless Router :: E4200 / Open Nat / Port Forward Xbox?
Aug 13, 2012I'm using Cisco Connect Cloud to connect to my E4200 router. I wish to open my NAT type as currently its moderate on all games.Where the hell is the area to add the port ranges?? Is it even an option on the new connect cloud? If it is, it doesn't make it very easy to find. Would be allot easier if you had a tab/app for "Gaming/Applications" like you did previously.
View 1 Replies View RelatedLinksys Wireless Router :: E4200 Failed To Port Forward Properly
Apr 5, 2012A while back, I had my own minecraft server running. I had everything working and it was flawless. Then for some reason it just stopped working. I was Unable to open ANY PORTS. I did happen to try 65 - 110 and 254 - 210, as well as 12, 212 and 122. I dopnt know what happened but i have been searching everywhere on the internet (roughly 3 months)
View 1 Replies View RelatedLinksys Wireless Router :: E4200 - Unable To Forward Port 5900
Sep 27, 2012I think i have tried everything i could think of to forward port 5900 with no luck. iIhave e4200. it is for RealVNC application. I followed steps from here: i have windows 7 and nortonn internet security. i disabled the firewall and added a rule to forward port 5900 in windows but did not work either.
View 9 Replies View RelatedLinksys Wireless Router :: WRVS4400N Port Forward Is Not Working To FTP Service
Feb 17, 2012I've been configured my device to forward FTP service to my server, however, I can't access this service outside from my network. I used Single Port Forward and not worked, after, I've used Port Range Forwarding starting in 20 to 21 and not work again.I've sniffed my computer and I've found just 3 outsides packages without response.I've tried with directly IP ADDR and DYNDNS ADDR, but neither one or other worked.
View 1 Replies View RelatedLinksys Wireless Router :: Port Forward With E1200 / IPv4 Address
Apr 22, 2013I'm trying to set up a minecraft server i have the correct ipv4 adress and port but for some reason its still closed?
View 7 Replies View RelatedLinksys Wired Router :: RV042G / Create Service To Forward Public Port 9010 To Internal IP Address With Port 23?
Oct 12, 2012Is it possible to create a service which will forward public port 9010 to an internal IP address with port 23?First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80?
View 1 Replies View RelatedLinksys Wireless Router :: Port Forward With EA4500 Cloud Connect Firmware?
Jul 11, 2012Installed my new EA4500 and trying to access my PC from internet (remote desktop) in order to do so I need to forward the TCP port 3389. In the old web admin page this option was easy to find and change. with the new cloud connect I can't find it. how do Ienable port forwarding on the EA4500?
View 3 Replies View RelatedLinksys Wireless Router :: Cisco E3000 Port Forward Settings Won't Save
Nov 28, 2011i am trying to port forward my router so that i can run a minecraft server. When I put in th port number and save the changes, it brings me to a screen that says my changes have been saved yet when i go back to the page they haven't. I have tried deleting the cookies on my browser, using another browser, using another computer, and hard resetting the router for ten seconds. None of this works.
View 2 Replies View RelatedLinksys Router Unable To Forward Port 80 / 443
Jan 19, 2013I have unchecked 'Block Anonymous Internet Requests” but then also I am not able to forward ports like 80 and port 443.
View 1 Replies View RelatedLinksys Wired Router :: BEFSR41v3 Need To Forward A Port
Feb 12, 2012i Have a router called Linksys BEFSR41v3 i need to port forward a port but it just wont open i loggerd in on my router using 192.168.1.1 after i click applications & gaming started the port on 100 and ended on 100 used ipconfig in cmd to find me ipv4 adres and putted in ip adress box also both protocol are on and i clicked the enabled function also i tried also got a static ip i used canyouseeme.org to cheak if my port is open it still says its not open.
View 9 Replies View RelatedRouters / Switches :: Linksys E3000 Router Will Not Forward Port 443
Dec 20, 2011I attached an Iomego Home Media network hard drive to my Linksys E3000 router (via ethernet cable). Before setting up the remote access on the Iomega, I forwarded the ports that it wanted (443 and 21) to the static IP of the Iomega. I checked to see that they were open using yougetsignal.com and they were both open. After setting up the remote access on the Iomega, the 443 port closed and I cant even get into the "manage storage device" page for the Iomega. Iomega uses TZo for the domain names. They tell me that the association is made between the name and my public IP address. My router is out of warranty since Sept, so Linksys wont give me the time of day. I contacted my ISP and while they block a couple of ports, 443 is not one of them.I've installed the latest firmware (1.0.04 - Build 6). Reset and rebooted numerous times, Port 443 remains closed.
View 8 Replies View RelatedLinksys Wired Router :: BEFSR81 Will Not Save Port Forward Info?
May 17, 2011BEFSR81 will not save port forward info. I am trying to setup port forwarding for xbox (53, 80, 88, 1863, 3074), I click on enable to the far right and then click save at the bottom. It says settings are succeful, will return in 5 seconds. When it returns everything is zeroed out.
View 3 Replies View RelatedLinksys Wireless Router :: How To Configure WRT310N
Dec 6, 2012How to connect my att dsl westell moden to my Linksys router. I am changing service providers from comcast to att. My router was working with my cable model but I'm unable to configure it to communicate with the dsl modem.
View 9 Replies View RelatedLinksys Wireless Router :: WRT310N - Color Of Internet LED?
Feb 5, 2012I am getting 22-30mbs down through my router wired and I'm only getting about half of that through wireless. Is this normal? I also have a question about the color of the internet led. The online manual says that it should be blue, but mine is green. All of the other LEDs are blue except the internet one. Not sure if that is an issue or not.
View 1 Replies View RelatedLinksys Wireless Router :: WRT310N Does Not Retain Configuration?
Sep 17, 2012our WRT310N router does not retain any configuration given to it. When we reset the device, it goes back to its factory settings. In that state we can access the device (http://192.168.1.1), make some changes and save it. The changes include giving it a different name from the default, and setting a password for the connection. However, when we try to use it for our wireless network, we cannot connect to the internet. Checking the Connection Status in a Windows XP laptop, we found out that we have been given a gateway different from what we have set the device into and thus a different set of IP addresses for each of the device.
Also at this time, we cannot access the router anymore (via 192.168.1.1 or via the gateway provided) and thus having no choice but to reset the device again. We then reinput the configuration desired, save it, restart the systems (both PCs and router) but after a few moments (initially it retains the settings chosen) we won't be able to connect through the Internet and find out that the router has a different configuration again. We also tried letting the device "rest" but the same problem persists.
Linksys Wireless Router :: Wrt310N V2 Blocks One Website
Aug 19, 2012I have a Linksys WRT310N V2 wireless router. Last week it started blocking access to our family website. That website appears to be the only one that is blocked. Every other website we have tried works just fine. I have tried the following.Remove the WRT310N router and plug a computer directly into the broadband modem. After this everything works fine for the one computer I have hooked into the internet.Remove the WRT310N router and substitute an old Linksys non-wireless router. Everything works fine for the hardwired computers on the LAN. Again, not really an option, need wireless access.
Unplug the router and so a soft reset. Still blocks this one website.I have not done a hard reset to factory specs. I wasn't looking forward to redoing everything I had set up.I looked over every setting in this router and can't find anything that would cause it to block a web page. I am far from a networking expert, but most of the settings seem pretty obvious.
Linksys Wireless Router :: WRT310N No Internet Connection
Oct 2, 2012I have a WRT310N router and suddenly it stopped connecting to the Internet. I can't ping anything from the router page. I tried restarting it a few times, unplugged it, left it off for a few minutes, plugged it back in, upgraded the firmware, still not working. I tried another router and it works fine. When connected directly to the modem, it works fine, so the problem has to come from the router.
I can connect to the router through wired or wireless just fine, I just can't access the internet.
Linksys Wireless Router :: Updated Firmware On WRT310N?
Mar 4, 2012Which I have never done since my dad bought it a few years ago. Now when I try re-installing the Linksys software it gets stuck when trying to identify the network from the cable modem through the router. I've tried every reset feature there is & nothing has worked! I'm I going to need a new router?
View 9 Replies View RelatedLinksys Wireless Router :: WRT310N Can't Connect To One Site Only
Dec 23, 2011I can't open a connection to eca-msp.crashplan.com (which is one of the data servers for the CrashPlan backup service).Symptom: "telnet eca-msp.crashplan.com 443" hangs, and eventually times out.
Works fine when I connect directly to my cable modem.No PC or device behind my firewall can access it when going through firewall.Other crashplan hosts (notably, central.crashplan.com 443) work just fine.And of course, every other https site I use works just fine.
[code]....
Linksys Wireless Router :: WRT310N V1 Cannot Get An IP From PPPoE Server
Nov 17, 2012I have a Linksys WRT310N V1.I am trying to connect this via PPPoE to another Thompson router/modem that has been succesfully switched into BRIDGE mode.The Linksys router is conneted via ethernet cable to an ehternet port on the Thompson router.The ADSL cable is pluggedinto the WAN port of the Thomson 'bridge'.There is no cable in the WAN port of the Linksys router.
The Linksys router is set up to connect over PPPoE using the username and password that was given to me by my ISPs tech support (checked and double checked).The DHCP server on the Bridged Thomson is set to ON. DNS is set to OFF.the DHCP server on the Linksys router is set to ON.
Linksys Wireless Router :: Increase Range In WRT310N?
Aug 12, 2011I've been using the WRT310N and noticed that the range is quite poor--I've noticed this in two different houses.I've tried using an old repeater but it is a G repeater so it seems to actually make things worse i.e. a remote device will work slightly better with an unrepeated N signal than a repeated G (router is a in mixed mode).
View 3 Replies View RelatedLinksys Wireless Router :: Best Configuration Settings For WRT310N?
Nov 27, 2011I'll be installing a cable modem in the next few days and would like to connect my WRT310N to it. I was wondering what would be the best settings to use.
Main uses:
- Distance from WRT310N to other devices is around 8 meters, separated by 1 concrete wall
- Stream music/video from PC to iPad and another laptop wirelessly.
- Transfer files between devices
Linksys Wireless Router :: How To Re-flash A Bricked WRT310N
Oct 27, 2010I accidentally flashed my WRT310N version 1.0 with version 2.0 firmware. After which the router was dead as a doornail.After a frustrating 3 hours of reading forums, following over 11 tutorials, and being 1 second away from throwing my WRT310N at the wall, I finally fixed it.I performed this fix on a Windows 7 32-bit PC. My provider is Comcast.Make sure you only have one ethernet cable connected from your PC to the router. The cable should be connected to any one of the 4 blue ports. I connected mine to port 1. DO NOT CONNECT IT TO THE YELLOW INTERNET PORT on the router.
With the router in your hand, hold down the reset button for 30 seconds until the port 1 light goes out then immediately disconnect the power while still holding down the reset button. DO NOT LET GO OF THE RESET BUTTON!WAIT 30 more seconds with the power disconnected. (Do not let go of the reset button)PLUG the power back in and WAIT another 30 seconds. After that, let go of the reset button. You should have held the reset button for a total of 90 seconds. This will wipe the router's nvram.Bring up the command prompt window that you prepared earlier. You should still see the ping command that you entered in Step 2. Now, hit ENTER to start pinging the router continuously. You will probably see a bunch of "request timed out" responses.Bring up the TFT2.exe window that you prepared in step 2. Press UPGRADE so it can begin communicating with the router. Make sure you set at least 10 retries.
As quickly as possible, go back to your router and HOLD the reset button and disconnect the power. You don't need to wait 30 seconds...5 seconds is enough. While stil holding the reset button down, plug the power back into the router and keep an eye on the command prompt and TFT2.exe windows.If the command prompt has successfully pinged the router, TFT2.exe will begin to flash it and very soon it will show a success message below the progress bar. If you still can't successfully ping the router, close and restart TFT2.exe using the same settings and try disconnecting/reconnecting the router's power again as mentioned in the paragraph above. You may want to try holding the reset button down longer than 5 seconds. I was able to get this to work on the FIRST TRY.Now that your router is has the proper firmware, go back to your adapter's settings (mentioned in step 4), delete the static IP and set it back to the default automatic settings.Plug your cables back in and don't forget to plug the ethernet cable from your modem to the yellow internet port on your WRT310N."Recycle" the power to your cable modem by holding down the reset for 60 seconds or disconnect it from the power outlet for 60 seconds.Reset your router by holding the reset button for 30 seconds.
Linksys Wireless Router :: Can't Get WRT310N V2 Connected In Gigabit LAN
Apr 2, 2012My HD Configuration is:
+ WRT310N v2 ,
+ Win7 x64,
+ Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20)
My connection is still 100.0 Mbps.
Linksys Wireless Router :: WRT310N Both Desktops Will Not Connect
Oct 29, 2009I have a WRT310N wireless router (Ver 1). In the house we've got 1 macbook, 2 laptops running windows vista, and 2 desktops running windows XP.The original problem is that both desktops will not connect wirelessly. All 3 laptops connect but neither desktop wants to connect. Most of the time neither desktop will even recognize the wireless network. On one of the desktops we bought and installed a linksys wireless-n pci adapter. It was installed using the software that came with it and the drivers were updated. It still does not recognize the network or connect (obviously).
This has led me to try to upgrade the firmware on the router. The firmware version it is currently running is 1.0.4 (Jan 3, 2008) and I have been trying to upgrade to 1.0.7. I downloaded the firmware update from the linksys website. I accessed the router via my browser and went to the "Firmware Upgrade" section under Administration. However, the upgrade freezes at 98% every time I try.
I have tried to upgrade the firmware wireless, wired, and wired without internet connectivity and nothing works. Fortunately stopping the upgrade after the freeze at 98% has not had any negative affects on the router as it still works perfectly on the 3 laptops. I even re-downloaded the firmware .bin file before the last attempt and still nothing.The fact that neither desktop will connect wirelessly is baffling, but I don't know what to make of the fact that the firmware update freezes at 98%. I've looked for the intermediary firmware updates to see if I could step my way up to the latest update, but I haven't been able to find them.
Linksys Wireless Router :: WRT310N Version 1 And 2 Differences?
Jul 10, 2009What is the difference between version 1 and version 2 of the 310N? I cannot find any information provided by Linksys or on this forum that describes what the difference is.
View 1 Replies View Related