TP-Link ADSL2+ Wireless :: TD-W8968 - Forward External Wan Port Like 49150 To LAN IP On Port 22?

Nov 18, 2012

Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmwae Version : latest
ISP : telecom italia business on ipatm

How to Forward an external wan port like 49150 to lan ip on port 22?In the control pannel I can set only one port , and this port will be the same where the connection will be router to the lan ip ,therefore If I set the port 22 , the connection will be natted to the 22, but how to set a different external port to a specified different lan ip port?

View 1 Replies


ADVERTISEMENT

TP-Link ADSL2+ Wireless :: TD-W8968 Remote Management Port Is Not Working?

Feb 25, 2013

Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : TM

The Remote Management Port is not working correctly. For whatever port I set, it will uses port 80 to access.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: W8968 Port Forwarding Stopped After Upgrade?

Mar 20, 2013

Region : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP :

I've been using the W8968 for a while now with the default firmware out of the box. Everything was working fine, except that during a hard reset (power off-an-on) all my port forwarding settings were gone. This was so annoying that I decided to upgrade the firmware to 120926. Now the settings don't disappear, but the port forwarding stopped working. I've tried to connect from the outside to all of the ports that I opened on the router, but it kept on saying the port is closed (even though it appears on the port forwarding list and the status is "Enabled"). The router firewall is also disabled.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Port Forwarding Setup / Connection Refused?

Jan 23, 2013

Region : Australia
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0
Build 120926 Rel.27100n
ISP : Bigpond

I am trying to setup port-forwarding (6360 for IP 192.168.1.111 & 6361 for IP 192.168.1.112) on this TD-W8968 modem. But when I test it on [URL]. I get a message "connection refused".

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-8970 Port Forwarding To A Different Internal Port

Mar 7, 2013

Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 0.11 v000c.0 Build 121203 Rel.46289n
ISP : Virgin Media

Is there any way of forwarding an external port to a different internal port on the TD-8970 ?I saw a question posed on an Australian forum implying that it might be provided in a later firmware release.Our TD- 8970 has replaced a previous NetGear WAG 320N which had this facility, and is useful to provide access to multiple machines without having to modify each individually to use a different port.

View 1 Replies View Related

Cisco Firewall :: ASA5505 Can't Port Forward Traffic From Two External IP Addresses

Dec 30, 2012

I am a total Cisco novice who has just had a ASA5505 installed to replace a linux freeware firewall (smoothwall).I'm told that the 5505 can't port forward traffic (e.g. ssh) from two external IP addresses to two internal destination machines via the same port # (22 in this example).

View 9 Replies View Related

Cisco Firewall :: 5505 Port Forward External Clients To 1 Address

May 4, 2011

I have a couple of ASA 5505's which work fine for what they are doing VPN and all that - we have 1 DLINK DFR-700 Firewall left and I need to get a new ASA to replace this since it is old.
 
All this box really does is port forward external clients to 1 address on the internal lan for client software updates. Any example configs?
 
So lets say we have client a with IP 1.1.1.1 and client b has 2.2.2.2 - at the moment this is what happens client a and b come in through http and get mapped to the internal http server 10.10.1.2
 
So I need to setup about 100 clients which can come in through http only - get mapped to the internal IP and also keeping the internal server to be able to access anything outside.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: Why TD-W8968 Use Two Channels

Apr 17, 2013

Region : India
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :

According to inSSIDer the router seems to be using two wifi channels (10+6) and inSSIDer is recommending to move to a standard channel (1,6,11).

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Virtual Server Link Missing Under Nat Menu

Mar 3, 2013

Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : latest
ISP : french orange

I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: W8968 Hangs After A Few Hours?

Feb 18, 2013

Region : India
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : BSNL

I Bought this w8968 a month back.. It was working alright till a few days back. When i connect and start browsing or downloading, it goes OK.. but after a few hours(sometimes 2, sometimes 1), It stops responding and I couldn`t ping 192.168.1.1 either through WiFi/Ethernet. Status indicators for DSL/WIFI/Internet/LAN all glowing as though nothing wrong with them..? The router is not that much hot when this happens.. When i switch off the router and then on, The Prob gets solved only to reappear again in 1/2/3 hrs..

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: W8968 Crashes 2 To 3 Times A Day?

Jan 10, 2013

Region : Spain
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : Telefonica-Spain

'm having the same problem my tp-link freezes several times a day and only a hard reset will get it working again. I have no idea how to fix it, I have contacted tp-link support and they say to make sure I have all the right ADSL configuration parameters.

View 7 Replies View Related

TP-Link ADSL2+ Wireless :: Td-w8968 Needs New Firmware Update

Mar 6, 2013

Region : Australia
Model : TD-W8968
Hardware Version : V1
Firmware Version :

Like many others with the W8968 Modem Router we are experiencing sudden disconnections from the internet every 1/2/3 hours with the only way to cure the problem is to hard reset the modem router. For your tech staff on the phone to say 'I'll just have to do this" is completely unacceptable.I have used 3 other modem routers with the exact same setup flawlessly with no disconnections so it's 110% the modem routers problem.I'm pushing this message for you, TP-Link, to release a new firmware version to fix this problem.

I also believe there are other problems incorporating port forwarding,etc aside from this major flaw.I used to believe TP-Link was a trusted and great company but after my experience I'll be thinking otherwise.

View 10 Replies View Related

TP-Link ADSL2+ Wireless :: Configuration ADSL For TD-W8968

Feb 7, 2013

Region : Brazil
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : Telemar Oi Velox

Very weird situation... can't get full speed with the TD-W8968 with my DSL link..

View 12 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Upstream Is Very Slow?

Apr 29, 2013

Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 0.4 v0005.0 Build 130217 Rel.62075n
ISP : TM Streamyx
I have internet speed : 8Mbps.
The status of Internet in the modem config as foloows:
UpstreamDownstream
Current Rate (Kbps)636 10240
Max Rate (Kbps) 900 23412
SNR Margin (dB) 12.8 23.5
Line Attenuation (dB) 8.1 1.1
Errors (Pkts) 0 0

from the above informations the upstream is 636 Kbps but when I did the speed test it show me that the upload not more than 300 Kbps.

I used another modem D-link modem and the upload is more than 550 kbps when I used speed test.

Actually the upload is very slow by using TP-link modem and when I used another modem the upload is double speed.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Reading / Writing From Usb Very Slow?

Nov 7, 2012

Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :

I've connected a usb hard drive to my TD-W8968 and shared the root folder via storage sharing.When I try to copy files to the hard drive from my computer the transfer speed it about 700 Kbytes/s. When reading from the drive to the computer I get 2000 Kbytes/s.This is way below the 30000Kbytes/s that can be delivered to/from the drive when it's connected to the computer's usb. I've tried several usb drives and for all I get the same results.Is there a way to increase the read/write speeds for the usb connected devices?

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Loses WAN On Wake From Sleep

Feb 19, 2013

Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0.1.1 V0005.0 bld 12016 rev 48690
ISP : Talktalk

yesterday (GMT) I received and installed my new TD-W8968 from Amazon and seemed to work a dream.. until today. The router connects to my desktop PC via a wired LAN connection but uses the wireless for laptop, TV, smartphone etc. Today I notice that when my PC wakes from sleep the LAN connection is lost. None of the LAN lights are on. And also there is no wi-fi connection either and even though WLAN light is on there is no signal at laptop. Setup is pretty much out of the box though I did reset channel to avoid conflicts locally. This is set to 7. The PC LAN adapter is enabled and ready but no apparent connection to router. I changed the router LAN port and that seemed to work but after I had the problem again this change did not work. I changed the LAN cable and that seemed to work until next sleep! Then fail again!

Is there anything on LAN adapter or router that needs changing? Am I on the latest firmware and would an upgrade fix this?

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Media For Streaming Movie

Jan 18, 2013

Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n

I just got the new TD-W8968, I was interessed to use the mediashare for streaming movie to my ps3 system. I found out that is not possible to have working subtitle. using a normal vlc the avi file plays fine with the same name srt file.

View 3 Replies View Related

Tp-link Adsl2+ Wireless :: Td-w8968 How To Set Mobile Phone Wifi

Apr 1, 2013

Region : UnitedStates
Model : TD-W8968
Hardware Version : Not Clear
Firmware Version : eranet
ISP : eranet

I don't know how to set my mobilephone wifi.It's made by HUAWEI.Then it cost me a lot.Who can tell me how to set it?

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Can't Log In To Remote Desktop Connection

Mar 7, 2013

Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : 1.0
ISP :

I recently bought this modem for use at home. When I try to log in to my computer at work I am able to log in to the server via a VPN connection but not onto individual computers via Remote Desktop Connection. Both computers run windows 7.

View 4 Replies View Related

TP-Link ADSL2+ Wireless :: Can't Connect To Internet - TD-w8968 Router

Mar 26, 2013

Region : India
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : BSNL

I Bought thisTD-W8968 a month back.. It was working alright till a few days back. From the past 3days i'm experiencing internet light and DSL light going off...The DSL light is not constant even for 5min...When the DSL light comes up, the internet light takes almost 5min to comeup or before internet light come up the DSL light goes off.There wasn't problem with my old UT star modem..I already checked,its running fine without disconnection..When i replace it with TD-W8968 router ,the problem continues.. When my internet connection was good...The SNR margin was like 25 for upstream and 31 for downstream...After 2 days it went mad. here are the images shows about current reading..Fluctuates between 0.2 - 100 upstream and 2-35 for downstream

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Works Must Turn Off Modem

Apr 28, 2013

Region : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version :

I have a problem in the model TD-W8968 of modem.Wireless abruptly stopped Even works must turn off the modem Malk happens sometimes 3 to 5 times

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Priority On Bandwidth Control

Feb 7, 2013

Region : Spain
Model : TD-W8968
Hardware Version : V1
Firmware Version :

I have a TD-W8970. In settings "Bandwidth Manager" there is an option to put a value between 1 and 8, but does not specify which is better (1 or 8). What the value to give more priority to a computer to another?

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 / Slow Connection Speed

Jan 23, 2013

Region : UnitedStates
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 0.10 v0005.0 Build 120516 Rel.45877n
ISP : HiPointInc
Network Status.jpg

I've upgraded my line connection from 4mbps to 20mbps.I've also checked my status with HiPoint and on 192.168.1.1 which is shown on the attachment. No problems.

Max Downstream is 25612kbps but Current is only 4396kbps.Do I need to configure anything? Btw its directly connected to my PC?

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - Way To Forward Port For NAS

Apr 10, 2013

Region : UnitedKingdom
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 1.4.0 Build 111130 Rel.55990n
ISP : Titanadsl

My router is a TD W8960N v3 which isn't listed here.I've connected a Synology 110j to the router and need to sort out the port forwarding which I'm not much good at. I am finding the TP Link documentation. I did find the page on DMZ but I don't know what that is.

View 4 Replies View Related

TP-Link ADSL2+ Wireless :: Setup Info To Connect TD-W8968 To CenturyLink?

Feb 21, 2013

Model : TD-W8968
Hardware Version : V1
Firmware Version : ?
ISP : CenturyLink

I need the setup info to connect the TD-W8968 to CenturyLink.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Virtual Servers Does Not Have Loopback Function

Mar 10, 2013

When can we have an upgrade to include 'Lookback' function for Virtual Server ? I understand both Build-120802 and Build-120926 does not support this Loopback feature. Without the loopback feature, we won't be able to test out Dynamic DNS URL is working or otherwise on local PC.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Has Begun To Freeze Up / Web Interface Being Unavailable

Nov 29, 2012

Region : Sweden
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0_1.1_up(120926)
ISP : HessleholmNetwork

My TD-W8968 has begun to freeze up. It had been running for about two hours before this happened. It's a "slow" process that starts with the web interface being unavailable, i'm unable to connect to the modems web interface.And at about the same time it becomes impossible to connect new devices to the wireless network. Right about this point i did a speed test over the modem and performance was abysmal.It was so slow that my web browser believed that it was offline! But i was able to re run the internet speed test once more before it totaly locked up! At this point it was impossible to use the TD-W8968.

This was the,, i don't know,, perhaps the fifth time it happened in a row. It has been running perfect for two months before it began acting up like this.I have done a reset of the modem, didn't solve the problem.I have also done a reflash of the firmware, i've had the latest firmware since i bought the TD-W8968. But the reflash didn't solve it

View 14 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 / FTP Does Not Work After Bandwidth Control Enabled

Mar 7, 2013

Region : India
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : MTNL

After lot of troubleshooting and efforts I figured out there seems to be BUG with routers firmware 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n.When you enable Bandwidth control, FTP stops working from Internet. However, it does work from local network. When you disable Bandwidth control, FTP starts working from internet as well as local network.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Can't Use Reconnect Function In Program Jdownloader

Nov 17, 2012

Region : Italy
Model : TD-W8968
Hardware Version : V1

I have a problem with my new td-w8968 router.The problem is that i can't use the reconnect function in the program jdownloader.The script is created with jd but it doesn't work!!!

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Firmware Updates Overwritten Configuration

Apr 17, 2013

Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : TD-W8968_V1_130217

Having just updated the firmware I was surprised that it overwrote my configuration (WAN LAN & WiFi) settings.Is this normal for TP-Link firmware updates ?

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - DHCP Client List Is Incorrect?

Dec 3, 2012

Region : France
Model : TD-W8968
Hardware Version : V1
Firmware Version : TD-W8968_V1_120926
ISP : SFR
Device in question: siemans C610 IP voip phone
Configuration:

* The C610 is directly connected to TD W8968 via the ethernet port number 3 >> ethernet port number 1 is connected to the devolo homeplug 200AVPLUS . The PC is at the other end of the homeplug network

* The DHCP address starts at 192.168.1.100 - 192.168.1.199.

Symptom:

1. It takes a long time (about 2-3 minutes) for the C610IP to obtain the IP address of 192.168.1.100 after the synchronisation of the ADSL line is finished 2. In the DHCP client list, I could only see the IP address of the PC (192.168.1.101) but not the C610 IP. However, if I type 192.168.1.100, I could access to the configuration page of the C610 IP. - I only managed to see the C610IP once in the DHCP client list.

I tried to unplug -> replug the router but to no avail.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 DSL Is Working Fine But Not USB Printer Sharing

Nov 30, 2012

Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : Alice (Telecom Italia)

I have just bought this new device, installed, DSL is working fine but not the USB printer sharing. Allways tells me: "This system was not supported yet." Here is the message box: usb_printer_error.JPG.I have a HP DeskJet 1050 and a Canon Pixma MP150 machine. I know, the HP is not in the supported printer list, indeed Canon is.

View 13 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Is There A Windows 8 Printer Setup Utility Yet

Jan 5, 2013

Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
ISP : TalkTalk

I'm getting to the last barrier to my Router USB printer working..The UPS is seeing my printer now but the last hurdle is the Printer Setup program. It is not comatible with Windows 8 apparently. The one I downloaded of the support site doesn't run either. Any news off one coming out for Win 8?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved