TP-Link ADSL2+ Wireless :: TD-8970 Port Forwarding To A Different Internal Port

Mar 7, 2013

Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 0.11 v000c.0 Build 121203 Rel.46289n
ISP : Virgin Media

Is there any way of forwarding an external port to a different internal port on the TD-8970 ?I saw a question posed on an Australian forum implying that it might be provided in a later firmware release.Our TD- 8970 has replaced a previous NetGear WAG 320N which had this facility, and is useful to provide access to multiple machines without having to modify each individually to use a different port.

View 1 Replies


ADVERTISEMENT

TP-Link ADSL2+ Wireless :: Port Forwarding On TD8980

Mar 18, 2013

Region : UnitedKingdom
Model : TD-W8980
Hardware Version : V1
Firmware Version : 0.6.0 0.6 v000e.0 Build 130304 Rel.38108n
ISP : Plusnet

Have spent most of the day trying to get port forwarding to work! U an trying to run a mail server and am forwarding ports 25, 110, 995 to a PC on my LAN, only problem is the ports never get there. I can connect quite happily if I wire a laptop to the router BUT as soon as I try to connect from externally either by mail.domainname or IP I am not able to connect. Using telnet I can't connect to the ports either. If I forward port 80 I still connect straight to the router rather than trying to connect to the mail server for webmail. At the moment I am having to forward all mail from the server to a google account just to read it!!

View 14 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961ND - Port Forwarding Does Not Work?

Mar 10, 2013

Region : Italy
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 Build 120720 Rel.09287
ISP : alice

A couple of weeks ago I have bought a TD-W8961ND in replacement of my old modem/router (of another brand, to upgrade from Wireless G to N). I tried to replicate in the new router something similar to my old setup, so I programmed Virtual Servers (under the NAT menu) with the following rules: NATRules.jpg in an attempt to:

- grant access from "outside" Internet to my web server

- have a Wakeup-On-LAN from "outside" Internet ..etc.. without success. Please note that:

- I have successfully setup a DDNS server to reach my modem router from outside

- as for WOL, I defined my subnet mask as 255.255.255.128

- I have not set any other rule, nor in NAT, nor in routing or other

- I tried also with firewall disabled

- I do my testing by means of a smartphone with wireless disabled and Internet connection via mobile service provider

- Both the above mentioned functions were working with my old modem/router (and still work on LAN), and I have not changed other things (PC setup etc)

View 14 Replies View Related

TP-Link ADSL2+ Wireless :: W8968 Port Forwarding Stopped After Upgrade?

Mar 20, 2013

Region : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP :

I've been using the W8968 for a while now with the default firmware out of the box. Everything was working fine, except that during a hard reset (power off-an-on) all my port forwarding settings were gone. This was so annoying that I decided to upgrade the firmware to 120926. Now the settings don't disappear, but the port forwarding stopped working. I've tried to connect from the outside to all of the ports that I opened on the router, but it kept on saying the port is closed (even though it appears on the port forwarding list and the status is "Enabled"). The router firewall is also disabled.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961NB Port Forwarding (voip) Not Working

Jan 8, 2013

Region : Greece
Model : TD-W8961NB
Hardware Version : V2
Firmware Version : 2.0.0 120823
ISP : otenet

The problem is that the voip is not working. I have 2 offices with adsl connection. A is the central office and B is the branch office. The installation is old with deferent ADSL modem-router(Zyxel). The zyxel at the A office was damaged so i had to change it with Tp-link. The potology with ip and cables is the same. I tested the port forward for voip (port 1720) with telnet from outside of the office and responds correct. When i try to call from the A office to B office it seems that i can not connect. When i call from B office to A office the phone is ringing and i can not hear office B but office B hear office A. When i use the old modem router at the office A everything is working fine but the modem-router works just for a while so i have to change it. I closed the firewall but the problem is still the same. I talked with the local distributor and they tolded me that i have to correct the configuration. At the interface setup is chosen the dynamic at the section get ip and not static as i should do. The is a problem there. The configuration asks me the subnet mask and gateway. I do not know the subnet mask and either the local distributor and the local internet provider cannot assist. The internet provider told me to use at the subnet mask 255.255.255.240 and at the gateway the ip of the router. I did that but when i did i lost the internet connection. I have to mention that i make some other port forwards to my SBS2003 server and like remote desktop, vpn connections and https that works fine. The only prolbem is with the vpn port forwarding.

View 4 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Port Forwarding Setup / Connection Refused?

Jan 23, 2013

Region : Australia
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0
Build 120926 Rel.27100n
ISP : Bigpond

I am trying to setup port-forwarding (6360 for IP 192.168.1.111 & 6361 for IP 192.168.1.112) on this TD-W8968 modem. But when I test it on [URL]. I get a message "connection refused".

View 2 Replies View Related

Cisco Routers :: RV042G Port Forwarding From Public Port To Internal IP?

Oct 11, 2012

Is it possible to create a service which will forward public port 9010 to an internal IP address with port 23 ?
 
First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Forward External Wan Port Like 49150 To LAN IP On Port 22?

Nov 18, 2012

Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmwae Version : latest
ISP : telecom italia business on ipatm

How to Forward an external wan port like 49150 to lan ip on port 22?In the control pannel I can set only one port , and this port will be the same where the connection will be router to the lan ip ,therefore If I set the port 22 , the connection will be natted to the 22, but how to set a different external port to a specified different lan ip port?

View 1 Replies View Related

D-Link DIR-655 :: Subsonic Port Forwarding / Get Machine - Port From Outside / Internet

Feb 16, 2011

I am having an issue opening a port (4040) on the 655 for my Fedora-based subsonic server.  Inside the LAN, I can see the device from other peer machines, so I am confident the port is open and listening.  However, I can't seem to get to the machine-port from outside/internet. 

I have tried Virtual Server and Port Forwarding with single port.  The server has a stactic IP which I've included in the DHCP range and outside the range.  I have a DSL connection (AT&T), modem only.  I have updated firmware.  I have exhausted the Subsonic community's knowledge, everything points to the router, but all the settings seem correct.  What am I missing?  Is if possible there is a defect in the router? (don't laugh).  Is there a way to trace a request to that port to see where it is hanging?

(yes, I've STFA, but don't know what else to do).

View 2 Replies View Related

Cisco Infrastructure :: Port Triggering / Forwarding On DDR2200-CL ADSL2 Router?

Sep 19, 2011

I got a new router yesterday and I'm trying to re-portforward a  server that I was hosting. I access my router page and add the ports to the  port triggering page and it saves. After that, I go and check if my ports  are open, but it is still saying that they are closed. The protocol is set at TCP. However, on my old 2WIRE router,  I used to be able to set the application type as FTP. But theres no option to do it on this one.
 
Everything worked fine before on my old 2WIRE router. Also, if it makes a  difference, I'm using the Windows 8 developer preview. I'm not sure if this would be the problem, but I also tried adding a  port exception to the firewall but can't find the option to do so.

View 1 Replies View Related

Thomson TG585 V8 - Port Forwarding Internal 53 To Opendns 5353

Jan 10, 2012

My isp seems to be using a Transparent DNS proxy and I tested DeleGate on a windows PC and opendns works but I would like to set my router to forward all 53 udp to 5353 udp on to 208.67.222.220 so that opendns can work on ipod,ipad and smartphone etc, I have tried to use the following command to set the router to forward from port 53 to 5353 but no luck:

nat mapadd intf=Internet outside_addr=208.67.222.220 inside_addr=192.168.1.66 protocol=udp outside_port=5353-5353 inside_port=53-53 mode=auto weight=10

View 2 Replies View Related

Cisco Routers :: RV016 / RV042 / RV082 Internal Port Forwarding?

May 16, 2012

I'd like to setup a WCCP in those routers, but as I read, it's not possible.
 
Another way to circumvent this limitation is to foward a request to the router from the LAN port 80 to a LAN IP, something like:
 
LAN 1 192.168.1.100:80 -> router -> LAN 2 192.168.1.101:80

View 1 Replies View Related

Cisco Switching/Routing :: 881W - IOS Port Forwarding Commands For Port Forwarding

Apr 7, 2013

I am trying to open up port 32400 on my 881w Cisco router but I have not had any success I need to configure manual port-forward to enable my Plex Media server.

View 1 Replies View Related

Cisco Firewall :: ASA5505 Configure Port Forwarding To Multiple Internal IP Addresses

Jun 21, 2012

ASA 5505 Firmware 8.3(4), ADSM 6.4(2).I have a public IP address of 168.87.3.4.I need to forward ports (5060, 5080, etc.) to one internal address. (192168.1.1).I need to foward different ports (10020-10080) to a different internal address (192.168.1.2) Everything I read tells me how to do this in a 1 to 1 static NAT.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND / Converting LAN To WAN Port?

Jan 1, 2013

Region : India
Model : TD-W8951ND
Hardware Version : V1
Firmware Version : 5.0.0
ISP : Beam Telecom

I recently bought this device in hurry . My ISP has directly connected RJ45 cable to my laptop .So i need to use this device for sharing internet to my wireless devices .IS it possible to convert Rj45 to Rj11 if so let me know the process .I have seen interenet about converting lan port to wan for TD-W8960 device . but GUI administration is quite different for my device .

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: Where Is PVC Ethernet Port Mapping In TD W8961ND

Jan 18, 2013

Region : Vietnam
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 build 120524 rel 05221
ISP : VNPT

Where is the PVC Ethernet Port Mapping in TD W8961ND?

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Remote Management Port Is Not Working?

Feb 25, 2013

Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : TM

The Remote Management Port is not working correctly. For whatever port I set, it will uses port 80 to access.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8980 Port 7547 TCP Open By Default

Feb 18, 2013

Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 0.5 v000e.0 Build 121225 Rel.42874n
ISP :

Just checked and port 7547 which is used for CWMP is open by default even if the settings are showing disabled. Try http://"external IP address":7547

View 6 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961ND - Cannot Access Virtual Server Port 80

Mar 22, 2013

Region : Others
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0
ISP :

My router is TDW8961ND
The firmware version is 3.0.0
The hardware version is 3.0

I am trying to have a virtual http server at port 80 but when I do this and save, I get this message: "Notice: The WAN HTTP port of CPE will be chaged to 8080 if submit successfully."Then after that I cannot access the server at port 80.

View 2 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841ND Port Forwarding Not Done Properly

Mar 16, 2013

Region : Malaysia
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : 3.12.9 Build 120221 Rel.31475n
ISP : UNIFI Telekoms

I am doing port forwarding for 2 webservers i have IP Address is 192.168.0.2 and 192.168.0.4 Both have web apps running find within LAN, both run on port 80.Error code: 14004.

View 8 Replies View Related

TP-Link 300Mbps Wireless :: Expanding Port Forwarding Slots For WR-941N?

Dec 31, 2012

Region : UnitedStates
Model : TL-WR941ND
Hardware Version : Not Clear
Firmware Version : 3.12.5 Build 100929 Rel. 57776n
ISP :

I have a TP Link router model number: WR941N (under hardware version it says "v2/v3", that's why I put "not clear" under "hardware version" in the form). Whether it was possible to add even more slots for Port Forwarding for this router, the current hard limit is 16, and I would like to have more than that, what would be the procedure to do so?

View 2 Replies View Related

TP-Link Dual-Band Wireless :: WDR4300 Port Forwarding For DynDNS?

Dec 18, 2012

Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 build 120810 Rel.44064n
ISP : BT infinity

I'm trying to portforward on my WDR4300 to use Dyndns to view my Dreambox outside of my home network.I can not seem to forward ports, is there a guide to port forwarding for this router.basically I want to forward port number 12000 to my dreambox with local ip 192.168.0.101 ( with dyndns representing 192.168.0.101)

View 7 Replies View Related

D-Link DIR-655 :: Internal Port Blocking / Routing?

Jul 14, 2012

Have a Rev. B1 w/207NA on Time Warner with a Moto Surfboard SB5150.Working with TiVo's, we've been through hell and back trying to resolve why Multi Room Viewing doesn't seem to want to work - but only one way!  The newest TiVo's their Premiere model with HD and all the bells and whistles, it sees the other TiVo and all the other software that can send programs back and forth with it.

I brought on a Series 2, which is an older model that's non HD and has some older software in it.  While the Premiere and the other PC's/Software around the building's network can 'see' the Series 2 and it can 'see' the other shared PC's, etc. the thing can't 'see' the Premiere.This has been going on for awhile, I've worked with TiVo Support also to unlock ports, IP addresses and anything else we could think of.  Still no luck.  Then we had a strange occurance!

The DIR-655 seemed to 'lock up' or disconnect from the Net.  One day I was surfing the Now Playing menu in the Series 2 and the other TiVo wasn't showing as usual.  I checked it again during a commercial for something totally different and suddenly noticed there it was!!  I thought it was weird, so I went out front to check with the person using the main TiVo if they had made any changes or done anything - they hadn't, but did mention their Net connection was gone.

I turned around and looked at the 655's status lights and noticed while all the rest were fine - the WAN/Net status light was totally out.  Not a single blink.  And then I looked at the Moto cable modem and noticed it's 'activity' light was also totally dormant.  I twisted the Moto to get a better look at it and things started working again, I tightened the cable modem cable on the rear and that was it.

From that point on - once again, the front TiVo won't show on the back TiVo!  Does every other way, but not that.  In our discussions on TiVo we thought it could've been the cable modem firewall or something, but I retested it and this time it had NO effect.  Tried not only taking out the cable-cable but the Ethernet cable as well to ensure all were tested.  Still didn't now up.  What I thought was going on was the 655 had turned into a giant 'Hub', which would've caused the TiVo's to use their old-fashioned Beacon software to 'find' each other.  When the 655 software kicked back in from that glitch, the hub setup would've obviously stopped and the 655's software settings would've kicked back in.

I have a complete list of the ports internally that need to be open for those two TiVo's to communicate, but I can't find anything in the 2.07NA GUI (or Help manuals) that tell me how to write a rule to open those ports internally.  I wouldn't think there's any internal blocking or firewalling going on (I have it set to allow communications between clients on the internal Net) but there's so many settings in this GUI it makes your head spin!

View 14 Replies View Related

TP-Link 150Mbps Wireless :: TL-WR740N Router - After Forwarding Port Speed Rapidly Decreases

Dec 3, 2012

I have TL-WR740N router. ISP should provide me up to 100Mb/s internet speed. Actual measurements shows me about 80 Mb/s. The problem is when I enable 3389 port in Port Triggering my internet speed drops to 2,5 Mb/s. When I disable port triggering, speed become normal again.

View 3 Replies View Related

Linksys Wired Router :: RV042G / Create Service To Forward Public Port 9010 To Internal IP Address With Port 23?

Oct 12, 2012

Is it possible to create a service which will forward public port 9010 to an internal IP address with port 23?First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80?

View 1 Replies View Related

Cisco Routers :: RV042G - Port Forwarding To 2 Different Destinations Based On Incoming Wan Port

Apr 22, 2013

how to: port forwarding to 2 different destinations based on incoming WAN port
 
The default HTTP service works fine: TCP80/80-> 192.168.0.55
 
I have a couple of IP security camera's I'd like to be able to access remotely that also listen on port 80. I tried TCP & UDP 8009/8009-> 192.168.0.9 without any luck. Not sure how to handle the port redirects on the RV042G? Seems simple and was on the Symantec, could be user training :-)
 
I was able to do port redirect with the Symantec Firewall I'm replacing.

View 2 Replies View Related

Cisco Firewall :: Change Default SSH Port On ASA 5505 (port Forwarding)

Dec 2, 2011

So here is my network.
 
ASA5505--->Cisco1841--->Cat2960
Code
ASA asa831-k8.bin
Cisco 1841 c1841-adventerprisek9-mz.151-4.M2.bin
Cat 2960 c2960-lanbasek9-mz.122-55.SE1.bin
 
and here is my dilemma.
 
I can SSH from the internet to my ASA on default port 22, directly to my public IP.  I can SSH from the internet to my Cisco 1841 on port 2001. I can not however, SSH to my Cat 2960.  From what i can tell, on the Cat2960 i can't change the default port 22 for SSH to different port, just like i did on the Cisco 1841.  I looked to see if I can change the default port for SSH on he ASA, it does not look like this is an option.
 
The bottom line is that i want to be able to SSH to all three devices from the internet.  I only have one public IP.  As of now, what i can do is only SSH to the ASA on default port 22 directly to the public IP and Cisco 1841 on port 2001.  It appears that changing the default SSH port on Cat 2960 is not an option.  It also appears that I can't change the default SSH port on the ASA, if i could, i would and then i should be able to SSH to the Cat 2960 on port 22. No matter what i did on the ASA, it always listens on port 22 for SSH connections.
 
show asp table socket
TCP       001f549f  <<pub IP>>:22              0.0.0.0:*               LISTEN
 
how do i make it listen on different port?
 
Here is relevent config for SSH for cisco 1841 (port forwarding)
 
ON ASA
object network ROUTER
host 10.10.1.1

[Code].....

View 28 Replies View Related

Port Forwarding On D-link DES 1008D?

Feb 9, 2011

How I do it? I know nothing about this stuff... I can't open the ports.

View 1 Replies View Related

D-Link DIR-825 :: Port Forwarding On 825 REVB

Dec 27, 2011

I was trying to port forward and could not get it to work. I run a Camfrog room sever of my desktop computer. I needed the TCP port 6005 open to the desktop and UDP ports 5000-15000. I enter that in to the Port forwarding setting but it never work. So later on today I try this I blank out the TCP 6005 in the port forwarding and letf the UDP setting in it and saved it. Then I went to the Virtual server settings and add camfrog3 in the name and put the TCP port 6005 in to it and check it and save the setting and bingo it work.

View 1 Replies View Related

D-Link DIR-615 :: Port Forwarding For Server?

Feb 8, 2012

Alright, so I'm trying to set up a Minecraft server without having to use some sort of hosting program, such as LogMeIn Hamachi. I have tried port forwarding both my external IP from "whatismyip.com" and from ipconfig in the CMD WITH the correct Minecraft port, and others still cannot connect. note that I can only connect to my own server when I use the IPv4 address from my CMD. get my server working so that others can connect? (I have been sure to change my "server properties" file's "server-ip" line accordingly.)

View 1 Replies View Related

D-Link DIR-655 :: Could Not Get Port Forwarding Working

Feb 11, 2011

I setup port forwarding for many router before, but I couldn't get this one to work.I triple check all of my configuration, they all setup correctly. But the port/ports on the router is not open.

View 1 Replies View Related

D-Link DIR-655 :: Get And Setting Up Port Forwarding?

Jan 18, 2012

I have read the sticky about the Game fuel, and i have tried resetting everything, static IP address, all the info i have found on line. i still i keep getting booted when i join a game, or most of the time i cannot join a party. No matter what changes I make it gets worse than factory setting. i have read for hours on different ways to set up the router and what not. i have changed settings on the PS3, router and still getting nowhere.so can some one pls tell me how to set this thing up before i use it as anger management.?i know how to access the router page . but i don't get the setting up port forwarding.

View 10 Replies View Related

Cisco :: Not Enough Port Fields In Port Forwarding For Linksys E4200

Jul 16, 2011

I have always used netgear routers in the past. After a series of issues regarding configurations not working correctly I invested in what appeared to be a semi pro router, the cisco linksys e4200.
 
I have a centralized server which I use to access a mass of different services such as mail, dns, VPN, FTP, Kerberos, http and many more. While I am not a massive networking ****, this server setup is like my garage project. To access these services externally to my LAN as far as I understand I would need to configure port forwarding for each service to my server. Unfortunately the control panel for the linksys E4200 only offers about 15 custom port fields for forwarding, and some documentation I have read shows that with it's basic install my server could be using up to 60 ports at once.
 
Is this router just not suitable for this sort of network. If so I will be very disappointed because I have spent a quarter of the price on netgear routers with more control than this.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved