TP-Link ADSL2+ Wireless :: TD-W8961NB Port Forwarding (voip) Not Working

Jan 8, 2013

Region : Greece
Model : TD-W8961NB
Hardware Version : V2
Firmware Version : 2.0.0 120823
ISP : otenet

The problem is that the voip is not working. I have 2 offices with adsl connection. A is the central office and B is the branch office. The installation is old with deferent ADSL modem-router(Zyxel). The zyxel at the A office was damaged so i had to change it with Tp-link. The potology with ip and cables is the same. I tested the port forward for voip (port 1720) with telnet from outside of the office and responds correct. When i try to call from the A office to B office it seems that i can not connect. When i call from B office to A office the phone is ringing and i can not hear office B but office B hear office A. When i use the old modem router at the office A everything is working fine but the modem-router works just for a while so i have to change it. I closed the firewall but the problem is still the same. I talked with the local distributor and they tolded me that i have to correct the configuration. At the interface setup is chosen the dynamic at the section get ip and not static as i should do. The is a problem there. The configuration asks me the subnet mask and gateway. I do not know the subnet mask and either the local distributor and the local internet provider cannot assist. The internet provider told me to use at the subnet mask 255.255.255.240 and at the gateway the ip of the router. I did that but when i did i lost the internet connection. I have to mention that i make some other port forwards to my SBS2003 server and like remote desktop, vpn connections and https that works fine. The only prolbem is with the vpn port forwarding.

View 4 Replies


ADVERTISEMENT

TP-Link ADSL2+ Wireless :: TD-W8961NB SIP Must Be Disabled To Let VOIP Working

Mar 20, 2013

Region : CzechRepublic
Model : TD-W8961NB
Hardware Version : V3
Firmware Version : Firmware Version : 2.0.0 Build 120823 Rel.26389
ISP : 88.103.200.11

I had a problem with this ADSL router - the VOIP outgoing calls did not work until I disabled SIP in telnet: ip nat service sip sw off.But the SIP is going to be enabled every time the router restart (or reset to default).

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961NB / How To Add Other DDNS Providers

Jan 12, 2013

Region : Germany
Model : TD-W8961NB
Hardware Version : V1
Firmware Version : 1.0.0 Build 110707 Rel.32779
ISP : DTAG

would it be possible to add other DDNS providers to the router menu?E.g. I use dnsomatic.com as DDNS service (pretty much the same syntax/protocol as DynDNS, but free and more flexible).

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961NB - Wake On LAN Over Internet?

Feb 4, 2013

Region : Germany
Model : TD-W8961NB
Hardware Version : V1
Firmware Version : 1.0.0 Build 110707 Rel.32779
ISP : Telekom Germany

I've just ordered the TD-W8961NB to replace my set of Modem & Router by one device.

Actual I have TL-WR940N, where I managed the Wake on Lan over internet by a port forward on port 9 to the local IP and setting up an IP&MAC Binding for this machine in the ARP table. By reading the user guide of TD-W8961NB, I'm missing the ARP Settings. Is there any chance to setup the WOL over Internet on this ADSL Router?

View 11 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961ND Crossflash To TD-W8961NB

Apr 26, 2013

Region : Greece
Model : TD-W8961ND
Hardware Version : V1

I have a TD-W8961ND that I got for my Dads internet connection to replace the awful Zyxel Modem/router. Problem is that the TD-W8961ND is Annex A (euroDOCSIS)We actually needed a TD-W8961NB - Annex B (DOCSIS)I already know that it is possible to convert other routers from A to B and vice versa...Just wondering if there is any way of either cross flashing or if there is a conversion firmware for this router.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-8970 Port Forwarding To A Different Internal Port

Mar 7, 2013

Region : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 0.11 v000c.0 Build 121203 Rel.46289n
ISP : Virgin Media

Is there any way of forwarding an external port to a different internal port on the TD-8970 ?I saw a question posed on an Australian forum implying that it might be provided in a later firmware release.Our TD- 8970 has replaced a previous NetGear WAG 320N which had this facility, and is useful to provide access to multiple machines without having to modify each individually to use a different port.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: Port Forwarding On TD8980

Mar 18, 2013

Region : UnitedKingdom
Model : TD-W8980
Hardware Version : V1
Firmware Version : 0.6.0 0.6 v000e.0 Build 130304 Rel.38108n
ISP : Plusnet

Have spent most of the day trying to get port forwarding to work! U an trying to run a mail server and am forwarding ports 25, 110, 995 to a PC on my LAN, only problem is the ports never get there. I can connect quite happily if I wire a laptop to the router BUT as soon as I try to connect from externally either by mail.domainname or IP I am not able to connect. Using telnet I can't connect to the ports either. If I forward port 80 I still connect straight to the router rather than trying to connect to the mail server for webmail. At the moment I am having to forward all mail from the server to a google account just to read it!!

View 14 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961ND - Port Forwarding Does Not Work?

Mar 10, 2013

Region : Italy
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 Build 120720 Rel.09287
ISP : alice

A couple of weeks ago I have bought a TD-W8961ND in replacement of my old modem/router (of another brand, to upgrade from Wireless G to N). I tried to replicate in the new router something similar to my old setup, so I programmed Virtual Servers (under the NAT menu) with the following rules: NATRules.jpg in an attempt to:

- grant access from "outside" Internet to my web server

- have a Wakeup-On-LAN from "outside" Internet ..etc.. without success. Please note that:

- I have successfully setup a DDNS server to reach my modem router from outside

- as for WOL, I defined my subnet mask as 255.255.255.128

- I have not set any other rule, nor in NAT, nor in routing or other

- I tried also with firewall disabled

- I do my testing by means of a smartphone with wireless disabled and Internet connection via mobile service provider

- Both the above mentioned functions were working with my old modem/router (and still work on LAN), and I have not changed other things (PC setup etc)

View 14 Replies View Related

TP-Link ADSL2+ Wireless :: W8968 Port Forwarding Stopped After Upgrade?

Mar 20, 2013

Region : Others
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP :

I've been using the W8968 for a while now with the default firmware out of the box. Everything was working fine, except that during a hard reset (power off-an-on) all my port forwarding settings were gone. This was so annoying that I decided to upgrade the firmware to 120926. Now the settings don't disappear, but the port forwarding stopped working. I've tried to connect from the outside to all of the ports that I opened on the router, but it kept on saying the port is closed (even though it appears on the port forwarding list and the status is "Enabled"). The router firewall is also disabled.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Port Forwarding Setup / Connection Refused?

Jan 23, 2013

Region : Australia
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0
Build 120926 Rel.27100n
ISP : Bigpond

I am trying to setup port-forwarding (6360 for IP 192.168.1.111 & 6361 for IP 192.168.1.112) on this TD-W8968 modem. But when I test it on [URL]. I get a message "connection refused".

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Remote Management Port Is Not Working?

Feb 25, 2013

Region : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : TM

The Remote Management Port is not working correctly. For whatever port I set, it will uses port 80 to access.

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-VG3631 / Can't Register TPG VoIP Account

Mar 30, 2013

Region : Australia
Model : TD-VG3631
Hardware Version : V1
Firmware Version : 0.6.0 1.0 v0001.0 Build 130108 Rel.54595n
ISP : TPG

RE: Voice SIP Account Phone Number Not Accepting 2 Characters My ISP TPG VoIP SIP account phone number is my TPG username rather than an actual normal telephone number. When I enter my 2 characters TPG username 'xx' as my TPG VoIP SIP account phone number as the 'Phone Number' field in the 'Voice - SIP Account' modem router management page on the LAN IP 192.168.1.1, then I press the 'Save' button, I encounter the error message "The length of 'Phone Number' is out of range[3,32]."I believe this error is due to my TPG SIP account Phone Number’ is not within the TD-VG3631 ‘Phone Number’ character length range from 3 to 32 inclusive.My old modem can register to my TPG VoIP account successfully with my TPG username 'xx' as the VoIP SIP account phone number.

I have contacted my ISP TPG and tried to get an actual VoIP SIP phone number. However, TPG does not provide an actual VoIP SIP phone number to their customers. TPG states I should use my TPG username as my VoIP SIP account phone number. They ask me to contact TP-Link to resolve the aforementioned error.Is there a way I can enter only 2 character TPG username as my VoIP SIP account phone number in the browser management page of the modem router? i.e. workaround, request TP-Link for a new firmware fix or else?

View 9 Replies View Related

TP-Link ADSL2+ Wireless :: TD-VG3631 - Can't Register My Engin Voip Account

Dec 18, 2012

Region : Australia
Model : TD-VG3631
Hardware Version : V1
Firmware Version :
ISP : Engin

i purchased this new modem TD-VG3631 to replace my old one, Finished the internet configuration, it's ok, i can go to internet smoothly. however when i configured the voip function, i encountered a big problem, even i have entered all info which provided by Engin into your modem, it doesn't work. the status always down..Very sure it is not my account problem, because if i enter these info into my old modem , it works very well.

[code]...

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-VG3631 Call To A Sip Local Asterisk Station / LAN VoIP?

Mar 19, 2013

Region : Spain
Model : TD-VG3631
Hardware Version : V1
Firmware Version : 0.6.0 1.0 v0001.0 Build 130108 Rel.54595n
ISP :

I have a problem with the VoIP feature of this router:I configure the router as a sip station of a asterisk local PBX (192.168.1.254),To this point everything is fine, I can call with a asterisk sip station to a analog phone (sip station 100) that is conected to the FXE port of the TPLINK,The problem occurs when I want to call with the analog phone to a sip station. I have a dial plan with a 0 prefix to call stations using the sip acount:Profile Name Registrar Address Phone Number Status Remove Edit Prueba192.168.1.254100up And when I call, I can see in the log the INVITE action :

32013-03-19 10:16:33OTHERDebugport 1 cx 0x3, evt/reason 3/0 buf (nil)
42013-03-19 10:16:01OTHERDebugport -1 cx 0x3, evt/reason 1/4 buf 0x4761a8
52013-03-19 10:16:01OTHERDebugthe initial INVITE request for [accIndex(0),callIndex(3) dest(<sip:103@192.168.1.254>)] is sen

But I�am sniffing traffic in the PBX and not received the invitation... Obviously the 103 station never recive the call...I think that maybe the INVITE is going out behind the WAN interface.... bug version?

View 1 Replies View Related

D-Link DIR-655 :: Could Not Get Port Forwarding Working

Feb 11, 2011

I setup port forwarding for many router before, but I couldn't get this one to work.I triple check all of my configuration, they all setup correctly. But the port/ports on the router is not open.

View 1 Replies View Related

D-Link DIR-655 :: None Of Port Forwarding Settings Are Working At All On Router

Nov 30, 2012

None of the port forwarding settings are working at all on my router. I have just a couple very simple settings. One of them is just an IP camera. I input the name, the TCP port, the computer (IP address) and that's it. This works just fine with my other Netgear router, but with this router, NADA. The router has the latest version of the firmware applied. Just applied it. Hardware version B. Firmware version: 2.10NA. If so, then I really need my money back since it is a main function of a router and it should work. Can't return it now, since I bought it several months ago. Never knew port forwarding didn't work because I never needed it until now.

View 6 Replies View Related

D-Link DIR-655 :: Stopped Working After Port Forwarding Configuration?

Mar 3, 2011

I was changing the port forwarding configuration when suddenly the router stopped working, and now the "D-Link" light is constantly on, and the power light and the 4 LAN lights are flashing. Nothing worked, resetting, or unplug and plug again in a short time.

I disconnected it for 12 hours, and when I plugged in again, it kinda worked, and the settings where factory defaults, so when I tried to connect it to DSL via PPoE, when ( I believe ) it reboots to accept the changes, it starting flashing again and completely stopped working.

So I waited 12 hours more unplugged, plugged it and it worked, and the setting from 12 hours earlier were still there. But when trying to connect to the DSL it stopped working AGAIN.

Now I don't know what to do. I guess I am going to keep trying connecting with little differences, until something.

I believe it still has warranty but since the is no official service in Uruguay, it isn't economically viable to send it overseas.

I am currently connected directly to the DSL, sharing connection to other computers through a switch and hosting an ad-hoc wireless network, but the performance is terrible and the wireless range is minimal.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Don't Work The Virtual Servers To Forwarding Ports

Feb 24, 2013

Region : Mexico
Model : TD-W8968
Hardware Version : V1
Firmware Version : the last version of this web page, i forgot number
ISP : TELMEX (infinitum)

i have some problems to configure the port forwarding in my router, don't it work ! but the port number 80 it works with my sub-domain in the internet. after i change this port to 8080 still dont work the port forwarding. the FTP server its ok.

[code]......

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Forward External Wan Port Like 49150 To LAN IP On Port 22?

Nov 18, 2012

Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmwae Version : latest
ISP : telecom italia business on ipatm

How to Forward an external wan port like 49150 to lan ip on port 22?In the control pannel I can set only one port , and this port will be the same where the connection will be router to the lan ip ,therefore If I set the port 22 , the connection will be natted to the 22, but how to set a different external port to a specified different lan ip port?

View 1 Replies View Related

Cisco Infrastructure :: Port Triggering / Forwarding On DDR2200-CL ADSL2 Router?

Sep 19, 2011

I got a new router yesterday and I'm trying to re-portforward a  server that I was hosting. I access my router page and add the ports to the  port triggering page and it saves. After that, I go and check if my ports  are open, but it is still saying that they are closed. The protocol is set at TCP. However, on my old 2WIRE router,  I used to be able to set the application type as FTP. But theres no option to do it on this one.
 
Everything worked fine before on my old 2WIRE router. Also, if it makes a  difference, I'm using the Windows 8 developer preview. I'm not sure if this would be the problem, but I also tried adding a  port exception to the firewall but can't find the option to do so.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8960N / URL Filter Is Not Working?

Feb 7, 2013

Model : TD-W8960N
Hardware Version : V1
Firmware Version : 1.4.0 Build 111108 Rel.40398n
ISP : TPG
URL Filter not working
Region : Australia
Model : TD-W8960N
Hardware Version : V1
Firmware Version : 1.4.0 Build 111108 Rel.40398n
ISP : TPG

Cannot get the URL filter to work Just upgraded to latest Firmware but that didn't work?

URL List Type: Deny Allow Disable
Address Port Remove

[URL]

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: Ddns Used Behind TD-W8970 Is Not Working

May 4, 2013

Region : Others
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :

I just set up DDNS for my home, and also set forwarding port 5000 for my NAS with an specific IP address 192.168.1.xx. Then, I use my office Internet to call DDNS xxx.dyndns.org:5000 to connect the NAS in my home, It is working OK (from outside to home) However, if I call xxx.dyndns.org:5000 by my home Internet, it is not working (from inside home to home). But if I directly call NAS' IP address 192.168.1.xx:5000, it is OK to reach it. So I think, DDNS used behind TD-8970 (inside home) is not working. TD-9870 is not forwarding port.

I don't know what do I miss in setup this WD-8970.

My previous Zyxel wireless router modem can allow me to us DDNS behind it with out any extra setting. Is it possible that there is still some bug in Firmware of this TD-8970?

View 4 Replies View Related

TP-Link ADSL2+ Wireless :: How To Successfully Get VPN Passthrough Working With W8960N

Jan 24, 2013

Region : United Kingdom
Model : TD-W8960N
Hardware Version : V3
Firmware Version :
ISP : ADSL24

How to successfully get VPN passthrough working with the W8960N?

I have the W8960N providing internet to local device. I want to setup a second router, TP-Link 1043ND with WW-DRT and PPTP set up to provide a separate access point for PPTP tunnelling to VPN servers outside of the UK. HideMyAss are providing VPN servers I wish to connect to.

I have followed instruction to set up both routers but would like to know if I am missing something.
First router 192.168.1.1 is basically untouched but with ports under NAT added: ports 1723 and 47 for my second router at local IP 192.168.1.111
Second router is set up according to [URL].

I know VPN work via just my first router. I can tunnel through using an Android tablet and connect to any HMA VPN server without changing anything on the 8960N.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND / Converting LAN To WAN Port?

Jan 1, 2013

Region : India
Model : TD-W8951ND
Hardware Version : V1
Firmware Version : 5.0.0
ISP : Beam Telecom

I recently bought this device in hurry . My ISP has directly connected RJ45 cable to my laptop .So i need to use this device for sharing internet to my wireless devices .IS it possible to convert Rj45 to Rj11 if so let me know the process .I have seen interenet about converting lan port to wan for TD-W8960 device . but GUI administration is quite different for my device .

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Port Forwarding Not Working?

Nov 30, 2012

I upgraded to a 6500 from a e4200. I use ports 81-84 on test web servers set to static Ip,s when I open the ports  nothing can get through from the outside. I can hit the pages internally on those ports and IP's but not from my external ip to those ports. When I set my old router everything is fine. 

View 9 Replies View Related

Linksys Wireless Router :: E1200 Port Forwarding Not Working

Jan 2, 2013

I set up port forwarding on my router.  When I go to canyouseeme.org and put in my public IP address (I can ping the IP address with no issues) and the port that I'm forwarding it says it can't hit the port.

View 2 Replies View Related

Linksys Wireless Router :: Port Forwarding Not Working On E2500

Dec 12, 2011

I've read over the FAQ and followed the normal instructions for port forwarding, but can't seem to get it to work with this particular router, E2500.  I have tried both the single port forwarding and the multi port range forwarding, and neither works.  I've tried an older WRT54G router and port forwarding works fine on it, so I know it's not my ISP.

View 4 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 DSL Is Working Fine But Not USB Printer Sharing

Nov 30, 2012

Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : Alice (Telecom Italia)

I have just bought this new device, installed, DSL is working fine but not the USB printer sharing. Allways tells me: "This system was not supported yet." Here is the message box: usb_printer_error.JPG.I have a HP DeskJet 1050 and a Canon Pixma MP150 machine. I know, the HP is not in the supported printer list, indeed Canon is.

View 13 Replies View Related

TP-Link ADSL2+ Wireless :: Where Is PVC Ethernet Port Mapping In TD W8961ND

Jan 18, 2013

Region : Vietnam
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0 build 120524 rel 05221
ISP : VNPT

Where is the PVC Ethernet Port Mapping in TD W8961ND?

View 1 Replies View Related

Linksys Wireless Router :: Port Forwarding Stops Working WRT400N?

Jan 16, 2010

Having a problem with port forwarding on their WRT400N? I'm forwarding one service (https) and this stops working if it's not accessed after a 10 days or so. The only way to get it to work again is to reboot the router. I’m running the “latest" firmware, which is an oxymoron considering it's been over 12 MONTHS since Linksys updated the code... Which is appalling considering this appears to be their flagship wireless N router.

View 5 Replies View Related

Linksys Wireless Router :: E1200 Port Range Forwarding Is Not Working?

Oct 17, 2011

I currently have an E1200. I can port forward single ports, but when I attempt to forward a range of ports it doesn't work and there is no error in the log.
 
Specifically I am port forwarding RTP ports (10000 - 20000). I am aware of the security risks, please do not preach.

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8980 Port 7547 TCP Open By Default

Feb 18, 2013

Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 0.5 v000e.0 Build 121225 Rel.42874n
ISP :

Just checked and port 7547 which is used for CWMP is open by default even if the settings are showing disabled. Try http://"external IP address":7547

View 6 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961ND - Cannot Access Virtual Server Port 80

Mar 22, 2013

Region : Others
Model : TD-W8961ND
Hardware Version : V3
Firmware Version : 3.0.0
ISP :

My router is TDW8961ND
The firmware version is 3.0.0
The hardware version is 3.0

I am trying to have a virtual http server at port 80 but when I do this and save, I get this message: "Notice: The WAN HTTP port of CPE will be chaged to 8080 if submit successfully."Then after that I cannot access the server at port 80.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved