Linksys Wireless Router :: E1200 Port Range Forwarding Is Not Working?

Oct 17, 2011

I currently have an E1200. I can port forward single ports, but when I attempt to forward a range of ports it doesn't work and there is no error in the log.
 
Specifically I am port forwarding RTP ports (10000 - 20000). I am aware of the security risks, please do not preach.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: Port Range Forwarding Fails E1200?

Aug 21, 2011

I have configured port range forwarding (8440 - 8449) for a single PC (192.168.1.134) and am unable to access these ports from outside my LAN. Conversely, if I set up single port forwarding for each of the ports in the range for the same computer then I am able to access from outside my LAN. Does port range forwarding actually work?
 
E1200 / 1.0.00 build 11 Jan 23, 2011

View 1 Replies View Related

Linksys Wireless Router :: E1200 Port Forwarding Not Working

Jan 2, 2013

I set up port forwarding on my router.  When I go to canyouseeme.org and put in my public IP address (I can ping the IP address with no issues) and the port that I'm forwarding it says it can't hit the port.

View 2 Replies View Related

Linksys Wireless Router :: E1200 Not Saving Port Forwarding

Sep 6, 2012

I am currently attempting to port forward on my Linksys E1200 Router and am not succeeding in saving my settings. I am attempting to open port 25565 though both Single Port Forwarding and Port Range Forwarding, and whenever I click the "save settings" button, I receive a full window message stating that my changes have been saved. Upon clicking this, I return to the previous screen whereupon my changes have been erased and my port has not been forwarded. Linksys E1200 Router not saving Port Forwarding changes.I have tried:

-Restarting the Modem
-Restarting the browser
-Restarting the computer
-Tried to Port Forward through both the Single and Ranged Port Forwarding

View 9 Replies View Related

Linksys Wireless Router :: WRT160n Port Range Forwarding For Dvr Equipment

Oct 3, 2012

I have a WRT160n that I am trying to forward some ports on for some DVR equipment. When I use the single port forwarding and enter each port separately it works fine. But I have 2 DVR's and they use a bunch of ports each so I want to use the port range forwarding because there are not enough spots in the single port forwarding section. The ports I am trying to forward are 8000-8004 for one IP address and 8005-8009 for a second IP address. I have entered it into the port range forwarding section but I can not connect from outside my network. As I said if I enter them in the single port section seperately as 8000,8001,8002,8003,8004 then I can connect fine outside my network.

View 7 Replies View Related

Linksys Wireless Router :: E4200 / Max 15 Single Port Forwarding And Range?

Nov 3, 2011

At the E4200 there is a limit of (free to make) 15 Single port forwarding and 15 port range forwarding to fill in.I get as suggestion that I must give up a total range of ports where all the ports I use where in.But for security reasons I will not do that.

View 1 Replies View Related

Linksys Wireless Router :: Port Range Forwarding On Cisco DPC3827 DOCSIS 3.0

Jan 26, 2013

I'm trying to make the server work for minecraft and I have the port number for the port which is 25565.I just need to know where exactly to enter this information. I also know that the protocol is supposed to be set for both tcp/udp.
 
So basically I guess my question is, where exactly do I put the port number if the one given to me was 25565?

View 2 Replies View Related

Linksys Wireless Router :: E1200 Port Forwarding To Wireless?

Feb 23, 2013

I have a camera connected to the router. IP address 192.168.1.145(static). It responds on port 7654. The camera connected either wired(if connected) or wireless otherwise using the same IP and port. the camera responds correctly on both wired and wireless from a LAN connected computer. If I try to connected via the Internet, camera will only respond if connected via a wire; i.e. the port forwarding is not forwarding internet requests on port 7654 to a wirless IP address, but will to a wired IP address. It has worked in the past, so the router seems to be capable of routing requests to the wireless LAN. Either I have changed some setting (unlikely as have reloaded saved configuration) or it is a hardware error in the router. Have had previous problems with the router which neccessitated a full reboot/reset to clear. Guessing there was some problem making the router run out of memory. Response to the configuration setup pages can be slow, and some (DHCP list and access policy) on occasions are just not responded to(AP) or not complete(DHCP - page opened but no data shown)

View 9 Replies View Related

Linksys Wireless Router :: EA6500 Port Forwarding Not Working?

Nov 30, 2012

I upgraded to a 6500 from a e4200. I use ports 81-84 on test web servers set to static Ip,s when I open the ports  nothing can get through from the outside. I can hit the pages internally on those ports and IP's but not from my external ip to those ports. When I set my old router everything is fine. 

View 9 Replies View Related

Linksys Wireless Router :: Port Forwarding Not Working On E2500

Dec 12, 2011

I've read over the FAQ and followed the normal instructions for port forwarding, but can't seem to get it to work with this particular router, E2500.  I have tried both the single port forwarding and the multi port range forwarding, and neither works.  I've tried an older WRT54G router and port forwarding works fine on it, so I know it's not my ISP.

View 4 Replies View Related

Linksys Wireless Router :: Port Forwarding Stops Working WRT400N?

Jan 16, 2010

Having a problem with port forwarding on their WRT400N? I'm forwarding one service (https) and this stops working if it's not accessed after a 10 days or so. The only way to get it to work again is to reboot the router. I’m running the “latest" firmware, which is an oxymoron considering it's been over 12 MONTHS since Linksys updated the code... Which is appalling considering this appears to be their flagship wireless N router.

View 5 Replies View Related

Linksys WRT54GS Router - Port Forwarding Not Working?

Jul 18, 2012

I am trying to run a server for minecraft, which some of you may know primarily uses Port 25565. I have tried everything that I've seen suggested. I have a Linksys WRT54GS router that I have my 2 xboxes, playstation 3, pc, and wii connected to. Now, I don't use any of these components at the same time. I had an issue with my xbox and the game "Black Ops", where my NAT type was strict, but a microsoft support technician walked me through port forwarding for the xbox, and it worked. My NAT type was displayed as "open" now. This is not the case with Port 25565 however, as even though I've port forwarded 25565 to my static IP i set up for my PC (which is my server PC), Port checking sites such as "Yougetsignal" and a couple of others are still showing no connection for the current external IP and Port 25565.

I went through ipconfig in windows "cmd" and made sure I had all the ip's and subnets and dns' and whatnot correctly entered in my routers configuration page. I went into Windows firewall and put new rules for port 25565 into incoming rules. None of this seems to work. I even shut off the firewall completely (temporarily, mind you), just to eliminate that possibility, to no avail. Still getting negative responses from these sites. I am able to log into my server myself, using "localhost" as the address, but none of my minecraft buddies can get on my server. I've also tried to use Hamachi to set up a server, which doesn't need ports to be forwarded, but although they can join my hamachi network, they can't join the server. Obviously there is more of a problem than just not being able to open ports, and I am at a loss.

Also, I am aware that my external IP, given by my ISP, will change with every disconnect and reconnect of my signal. I got my current IP address during this time and gave that to my buddies so they could join the non-hamachi network. For the Hamachi server I edited my Hamachi network IP into my server software's properties file, where as it would be left blank for my non-hamachi server.

View 4 Replies View Related

Cisco Switching/Routing :: Router 881 Range Port Forwarding

Apr 3, 2012

I have a Cisco 881 router in my office and I would like to do port forward for port 5060, and 10000 - 20000 to my PABX(192.168.1.61).After I did some research from internet, understand that we need to NAT by using following command to do port forward for port 5060.
 
ip nat inside source static udp 192.168.1.61 5060 XXX.XXX.XXX.XXX(WAN IP) 5060 extendable.However, now I'm facing an issue to perform port forward for a huge range of ports like 10000 to 20000.It is impossible to ask me add one by one?

View 3 Replies View Related

Linksys Cable / DSL :: WAG320n UDP Not Working On Port Forwarding?

Dec 5, 2011

I have some hardware on my internal network which I want to send udp packets. I can connect using telnet to it prooving that TCP and port forward works but when I try to send a UDP packet externally it fails.I can however send the same packet internally and port forwarding works fine.My router is Linksys by Cisco WAG320n.

View 2 Replies View Related

Linksys Cable / DSL :: WAG320N Port Forwarding / DMZ Not Working

Mar 4, 2011

I'm trying to open some ports for my webserver, I've configured the static IP and forwarded port 80 to my server's IP and I checked the port on canyouseeme.org and it says it's closed. I've tried multiple ports (21, 22, 7878 whatever) and all do the same thing.
 
So my next step was to try DMZ on the server's IP .. still no happiness .. ports stay closed. I checked this on multiple computers and it still won't open any ports for any machines on my network.
 
Updated to the latest firmware .. didn't make a difference. My ISP doesn't block any ports (didn't have any issues on my old router.

View 1 Replies View Related

Linksys Cable / DSL :: Home HG200 V2 Port Forwarding Not Working

Jul 20, 2011

I have got a Linksys @ Home HG200 V2 G Gateway. I am trying to setup port fowarding but its not working. I have gone onto the routers port forwarding setup page filled it out but the port is still closed.

View 4 Replies View Related

Cisco Firewall :: ASA 8.4 Forwarding Port Range?

Oct 30, 2012

I need to open port range 554 - 558 to a DVR on the internal network. Also, I need to NAT one of my public IP's to the DVR. How is this accomplished in 8.4? I was able to do it in an older version ASA software.

View 3 Replies View Related

Cisco WAN :: Port Range Forwarding On 1811?

Mar 23, 2006

I’m having serious issues getting Tandberg H.323 working behind this router with NAT.
 
My setup is Cisco 1811 configured with Fas0 to pull DHCP (public address). This router is being used in a mobile medical clinic VAN so the setup needs to be seamless and transparent to the users. The idea with the DHCP is anywhere they go they could pull a DHCP address and then NAT behind that address. The van visits mostly small schools in the Texas Rio Grande Valley providing medical assistance and consulting to the local community. The router has an 8 port built in switch and all ports are sitting in default VLAN 1.
 
Basic stripped down config, only relevant commands listed…
 
ip dhcp excluded-address 10.0.0.1 10.0.0.4
 
ip dhcp pool VANnet
network 10.0.0.0 255.255.255.240
default-router 10.0.0.1
dns-server 10.0.0.1(code)

Now initially I can’t even get the call to connect with just using the ports above, which I should. Also knowing there are several issues with H.323 and NAT I went ahead and added all know ports Tandberg says they use…
 
80 HTTPd *TCP
443 HTTPs TCP
1719 H323/RAS UDP
1720 H323/Q931 *TCP
2326-2373 (2837)** H323/RTP UDP
5555-55xx (5587)** H323/H.245/Q.931 TCP
 
Basically I created static NAT entries for all the ports and the ranges above. For the ranges I had to add a line for every port.
 
This didn’t and hasn’t worked yet even with some additional tweaking… Finally the question… am I going about this all wrong? Is there an arrangement of commands that will even work? How can I accomplish the port forwarding setup on a Linksys/Netgear router on a real Cisco router?

View 9 Replies View Related

Linksys Wireless Router :: E1200 V1. IPTV (multicast) Is Not Working

Nov 28, 2012

I have e1200 v1 with last firmware 1.0.03. Device using as AP/switch (no WAN port installed). When I open the TV chanal (239.0.1.3) the pictures 1 sec good and then stoped, device not responding. When TV off, 3 sec later internet works and device up.

View 4 Replies View Related

Cisco Firewall :: Port Forwarding A Range Of Ports (PIX 6.3)

Dec 5, 2012

I have a network with multiple servers behind a PIX with 6.3 on it. I have one public IP address, and I'm using NAT. I'm currently trying to port my Exchange server to a cloud host, and the vendor is requiring I open up a wide range of ports for MAPI, basically ports 1024 on. What would be the command to forward all of the trafic cominto/from that broad range? if I could simply route all trafic to and from their two IP addresses to my email server, that would accomplish the same end goal.

View 3 Replies View Related

Cisco Switching/Routing :: 881 To Do Range Port Forwarding

Jan 21, 2013

I have a Cisco 881 router in my office and I would like to do port forward for port 5060, and 10000 - 20000 to my PABX(192.168.1.61). After I did some research from internet, understand that we need to NAT by using following command to do port forward for port 5060. ip nat inside source static udp 192.168.1.61 5060 XXX.XXX.XXX.XXX(WAN IP) 5060 extendable However, now I'm facing an issue to perform port forward for a huge range of ports like 10000 to 20000.

View 9 Replies View Related

Cisco Routers :: RV220W Forwarding Port Range?

Sep 4, 2012

How can one forward a range of ports?
 
Suppose I have defined the following service:
 
Service: TEST
Port type: UDP
Starting port: 5060
Ending port: 5070
 
and I want to forward it to a specific IP. Then, if I create a new port forwarding rule for this service it asks me to specify a single port number to be used internally as:
 
Action: Always Allow
Service: TEST
Source IP: Any
Destination IP: 10.0.0.100
Internal Port: ?
 
I want to forward all ports from 5060 to 5070 to the internal range 5060 to 5070.

View 4 Replies View Related

Cisco Routers :: RV 120W - Port Forwarding Range

Sep 12, 2011

I am not a tech guy but have to take care of some basic IT stuff. I had Ether fast cable/DSL router and it got changed with RV 120W router. there were comment that internet is now working slowly - what could be the reason for this?
 
I copied most of settings. First big technical problem was with phone. It stopped working - call could get through but when answered there was no sound. We use linksys modem for VoIP. I called operator and was told to disable sip alg. I did that and service improved a little. When answering a call sound could get through but would stop for few moments and then continue. Operator told me to forward port 16384 to 16482 to VoIP modem IP. But I can only set forwarding for one port at the time in "Port forwarding" settings. Is there a way to forward to port range?

View 4 Replies View Related

D-Link DIR-655 :: None Of Port Forwarding Settings Are Working At All On Router

Nov 30, 2012

None of the port forwarding settings are working at all on my router. I have just a couple very simple settings. One of them is just an IP camera. I input the name, the TCP port, the computer (IP address) and that's it. This works just fine with my other Netgear router, but with this router, NADA. The router has the latest version of the firmware applied. Just applied it. Hardware version B. Firmware version: 2.10NA. If so, then I really need my money back since it is a main function of a router and it should work. Can't return it now, since I bought it several months ago. Never knew port forwarding didn't work because I never needed it until now.

View 6 Replies View Related

Linksys Wireless Router :: E1200 Not Working After Verizon Modem Change?

Jun 24, 2012

I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't work. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.

View 1 Replies View Related

Linksys Wireless Router :: E1200 Stop Working Due To Incorrect Configuration

Feb 14, 2013

I received a Linksys E1200 from a friend who careless tried to upload an incorrect configuration. After that the device became use full. It don't work at all.

View 1 Replies View Related

Linksys Wireless Router :: E1200 PPPoE And IPv6 Not Working Fine

Feb 7, 2013

Have a v2 E1200.  Connect with PPPoE to ISP.  IPv4 works fine.  With firmware included on router, 2.0.01, it would receive a /64 of IPv6 from the ISP.  This /64 would show up under 'status' / 'local network'.  Although it did not seem to advertise this space to PC's on my network so I was unable to use it.  I updated firmware to 2.0.04.  Now it does not even pick up the IPv6 /64 at all.
 
Anyone have PPPoE and IPv6 working?  Anywhere I can download 2.0.01 to try it again?
 
Is there a model of router that actually works with IPv6?

View 2 Replies View Related

Linksys Wireless Router :: E1200 No Longer Working After Verizon Modem

Jun 24, 2012

I have a new Linksys E2100 that was working well with an old Verizon modem. Then recently that modem gave up the ghost and I was issued another one (Westel Model 6100G). I have no problems with internet connectivity when connecting directly from my harddrive to the Verizon modem. I am also not having trouble connecting to the Linksys routher as I am able to see my wireless connection with no problem. However, when I try to set up the connnection with the E2100 in the loop (yes, it's connected correctly) I no longer have internet access.
 
I tried de-installing and re-installing the Linksys software (thinking maybe there was some new configuration that would be auto-detected with a new set-up), but this didn't work. I suspect that if the problem is with my Linksys router and not with my Verizon modem that there might be something that could be done to reconfigure something manually but I do not know enough about connections and wireless systems to trust myself not to mess something up.
 
At this point I'm assuming it's a Linksys issue since I know that my Verizon modem can connect me to the internet, so works properly. Is there some known incompatibility with this Linksys model and the Westell 6100G modem?

View 2 Replies View Related

Linksys Wireless Router :: E1200 System Suddenly Stops Working?

Oct 30, 2012

Right now I have my computer (iMac early 2012 summer purchase) plugged directly into the wall via ethernet cable for internet access.  I have only begun doing this in the past week because my E1200 wireless router has stopped working properly.  I have reinstalled and reset to factory settings and set up with Cisco Connect and setup manually over the past week troubleshooting every possible way I have ever known how. My internet, obviously, is working.  And when I set up the wireless network it connects properly and obtains an IP address and the lights on the back of the unit light up correspondingly and correct.  But I cannot connect to the internet via the router, wirelessly or plugged directly into it.  Yet when I take the internet cable and plug it straight into my computer it works.Mainly just need to know if this can be fixed or if I need to go return this unit and get a replacement.  The router was purchased two months ago and has not had any issues since I first set it up until a couple of weeks ago and my phone is using up all of my cellular data plan without being connected to my wi-fi...

View 1 Replies View Related

Linksys Wireless Router :: E1200 No Internet Port On Back

Sep 19, 2011

I have a question about the function of an E1200 relative to a WRT54G. We currently have the 54G plugged into our LAN, the Ethernet cable plugged into one of the Ethernet ports, not the Internet port, on the back. It is giving wireless clients IP addresses according to our main LAN DHCP, as if they were hard-wired which is correct. Bad thing is, I have no idea what IP address is/was assigned to the 54G itself as it was not logged when done, way before my time. I cannot log into it and take a look at its settings and attempt to mimic what is going on in there on something like an E1200.
 
Therin lies my next questions. What could be occurring on the 54G that is enabling it to dish out like a WAP and does the E1200 support WAP function? If not, which models do that can be added to the 54G? 

View 8 Replies View Related

Cisco Firewall :: Port Range Forwarding On Post 8.3 ASA5505

Jun 1, 2011

I have an ASA 5505 on a job. It is a smaller business that would have done better with an RV082, but they have what they have. It is running firmware 8.4. The client needed ports forwarded for their FTP server. The port range in this config is tcp 43333-43339. The FTP server ip is 192.168.1.2. [Code] ......

View 8 Replies View Related

Cisco Routers :: RV215W Router Port Forwarding Not Working?

May 11, 2013

RV215W router port forwarding not working.Port forwarding works for a short period of time, then stops working.  Reboot router, works again for short period of time, then stops again.
 
I have updated firmware to latest.  I had seen other similar bugs posted for 220 and I think 180, not sure if this router has similar bugs and waiting for fix release to firmware.I had recently purchased two, one deployed, will hold off on other now because of issues, and may have to move to different unit if a resolution not found this week.

View 5 Replies View Related

Linksys Wireless Router :: Port Forward With E1200 / IPv4 Address

Apr 22, 2013

I'm trying to set up a minecraft server i have the correct ipv4 adress and port but for some reason its still closed?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved