I'm new to the Cisco world and have so far got internet and VPN working (without SDM) using the IOS commands.I have hit a stubling block with port forwarding ports 80 (http) and 443 (https) to my small business server for outlook web access.I need to forward port 80 and 442 to internal LAN server 192.168.10.1.The Cisco 877 has a local IP address of 192.168.10.254. [code]
View 6 RepliesIs it possible to create a service which will forward public port 9010 to an internal IP address with port 23?First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80?
View 1 Replies View RelatedI have been asked to "forward a port on an ASA 5505 to an internal ip address." Sounds easy for most of you, and I thought I did it right, but I am not certain. Basically, they want it set up so that when xx.xx.xx.xx:30000 (x's = the firewall ip with port 30000) is accessed from outside, it is forwarded to an internal ip on port 30000 (xxx.xxx.x.xxx:30000)
Here is what I tried from within ASDM 6.4:
1. NAT Rules-add static NAT route:
original-Interface: inside
-Source: xx.xx.xx.xx (local ip of computer on LAN they wish to access from outside)
Translated - Interface - Use Interface IP Address
Enable PAT: Original and Translated port both set to 30000
2. Access Rule - add
Interface: Inside
Source: any
Destination: xx.xx.xx.xx (IP of Firewall)
Service: tcp/30000
Im trying to port forward a minecraft server. To do this i have to goto to the default Gateway which is 192.168.1.1. i come to an authentication screen that says:The server 192.168.1.1:80 requires a username and password.The server says: NETGEAR WNR2000v2.
NETGEAR WNR2000v2 is the name of my wireless router.Everywhere i go it says the username and password is:
admin, admin
admin, password
admin, 1234
admin, (none)
password, password
password, 1234
password, admin
password, (none)
None of these work i even tried typing the name name and password of my router. No luck?
I need to forward traffic from an Amazon server to an internal server with a SQL database on it so need to forward TCP 1433 to an internal IP (192.168.252.43) I have created an access rule to allow the amazon IPP through on 1433 but I am unsure how to point the traffic to the SQL server on the LAN.
I expect I will need to create a NAT rule to do this but cannot see how to achieve it.
I have another problem concerning a site to site VPN which establishes OK but does not pass traffic, I will post that question separately.
I am trying to set up a web server behind WRT55AG router. I have read many forums where people are having the same problem, but none explain how to fix issue. The router will not forward any port to the server. Any attempt to access the server from outside my local network just brings me to the login screen of the router. I have tried port forwarding port 80 and 10080 and both do the same thing. Also, I have the firewall, remote management, and UPnP turned off
View 3 Replies View RelatedI need getting access to my http server. I have a host name that I configured to point to my IPS IP address. Port 80 is enabled on my server, but I can't seem to get access it from my web address [code]
View 5 Replies View RelatedI write here to see if some kind soul can not solve my problem (which is common to seeso many people around the world). problem: I have a mail server (192.168.1.17) configured static NAT because it is accessible byPublic IP (PPP.PPP.PPP.PPP). Everything works properly from the outside, but if I get my Mail server (on port 443) from the internal network (192.168.1.xxx) there 'verse. This configuration is called Nat inside-to-inside is done by default by some SOHO routers(such as the TPLINK from 25 euros) but Cisco did not succeed. I search on the internet for 2 days without a get nowhere. PS: I have a Cisco 1801 router. (or 1941 as another router).
View 13 Replies View RelatedI have an old ASA 5505, and I'm having some trouble with Nat Hairpinning. I've done this with other firewalls before and I am having no luck now. I have an internal address that I wish to forward from an external address- so if someone goes to 123.456.789.012:3456 then it will forward to 192.168.1.244:92 (All numbers are arbitrary here- only for illustration). I have and Access Rule and NAT and PAT set up so that I can get in if I originate from outside the LAN. What I am trying to do is to have this work from inside the LAN as well- so that if I am at my desk, and I connect a device and type in 123.456.789.012:3456, it will deliver the content at 192.168.1.244:92. The problem I am having is that it just isn't working, and I cannot figure out why- When I started here, there was an address configured to work this way, and it still works- I just cannot find what is different between what I am doing and what the person who configured it did.
View 5 Replies View RelatedI'm having a business DSL-connection which requires a modem from the provider (It cannot be replaced by another modem/router)I want to know if it is possible to place the Cisco 877W-G-E-K9 behind the modem and set it up as an VPN-server.The internet connection wil be established in the modem/router of our provider.
View 20 Replies View RelatedI am new to the ASA series and I am at a complete loss as to why I cannot configure this router to forward SMTP and RDP traffic to an internal host.
The packet trace tool in ASDM shows complete end-to-end connectivity for RDP but it still fails to connect from outside. This is my config file, what I need to change in order to make it work?
I have one server 172.16.0.100 and i nat this server to a public ip X.X.X.5 and i open RDP for this public ip.Now when i access Remote desktop on this public ip x.x.x.5 it open perfectly.Now my senario is that i want to open a http url on port 5555,server ADMIN open port 80 for this URL on LOCAL lan(http://172.16.0.100:80)So how can i map port 5555 to port 80 on ASA 5520.so when i hit URL [URL]
View 5 Replies View RelatedRegion : Italy
Model : TD-W8968
Hardware Version : V1
Firmwae Version : latest
ISP : telecom italia business on ipatm
How to Forward an external wan port like 49150 to lan ip on port 22?In the control pannel I can set only one port , and this port will be the same where the connection will be router to the lan ip ,therefore If I set the port 22 , the connection will be natted to the 22, but how to set a different external port to a specified different lan ip port?
I have only recently noticed a HUGE decrease in my Utorrent speeds, so i thought i would have a gander and lo and behold.apparently the port Utorrent uses wasn't open. Now, i have tried about 10 different port numbers, made sure Utorrent is being accepted by Norton 360 Firewall,followed complicated directions to (i think) foward ports, and also follow directions to open a specific port.Nothing has worked so far, Utorrent still comes back with a port closed error.
View 1 Replies View RelatedIs it possible to create a service which will forward public port 9010 to an internal IP address with port 23 ?
First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80
I have an old ASA 5505, and I'm having some trouble with Nat Hairpinning. I've done this with other firewalls before and I am having no luck now. I have an internal address that I wish to forward from an external address- so if someone goes to 123.456.789.012:3456 then it will forward to 192.168.1.244:92 (All numbers are arbitrary here- only for illustration). I have and Access Rule and NAT and PAT set up so that I can get in if I originate from outside the LAN. What I am trying to do is to have this work from inside the LAN as well- so that if I am at my desk, and I connect a device and type in 123.456.789.012:3456, it will deliver the content at 192.168.1.244:92. The problem I am having is that it just isn't working, and I cannot figure out why- When I started here, there was an address configured to work this way, and it still works- I just cannot find what is different between what I am doing and what the person who configured it did.
View 7 Replies View RelatedRegion : UnitedKingdom
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 0.11 v000c.0 Build 121203 Rel.46289n
ISP : Virgin Media
Is there any way of forwarding an external port to a different internal port on the TD-8970 ?I saw a question posed on an Australian forum implying that it might be provided in a later firmware release.Our TD- 8970 has replaced a previous NetGear WAG 320N which had this facility, and is useful to provide access to multiple machines without having to modify each individually to use a different port.
My cisco 837 is connected to a ADSL Router by Ethernet Cable. I have forwarded the telnet port from my ADSL Router to the LAN IP of the Cisco Router so that i can connect to it Remotely but it is not working. I am able to telnet internally but from Internet it is not working. I am not using Cisco Router for ADSL Connectivity.
View 5 Replies View RelatedI have just purchased a nas drive. I want to be able to access my files from anywhere. I believe if i setup FTP i can view the files over the web. from what i have been told i need to forward port 21 to the ip address of the nas drive.
View 6 Replies View RelatedI purchased a Cisco 851 Router for the reliablity, but the process to manage the router to port forward a IP address for a internet camera ... I'm lost. I will try the forums, versus paying a $400 dollar fee for support.
What is the process to have an internal IP address for my outdoor network camera visiable for WWW? How do I port forward 10.10.10.40 How do I assign a static IP to this outdoor network camera?
I can access the Cisco SDM Express V2.5
I always seem to have problems when trying to configure port forwarding on cisco routers. I've even tried the instructions I have for a cisco 1811, but no luck. I have a cisco 871 and a computer that has VNC installed on it. I want to be able to access that computer from out side the network using the external ip address and port 5950. People outside the network will be able to open vnc viewer and type in *external ip address*:5950 and it will be directed to the computer with a static internal ip address of 10.12.0.10. What commands do I use to do this?
View 4 Replies View RelatedI can't get any type of port forwarding or DMZ to work with this router. I've checked for double NAT, have a static router IP etc.
I'm using Vista, but I've tried it on a computer with XP as well. I'm using the standard windows firewall, but I also tried disabling it.
I'm using the original 1.10 firmware, I don't know if this is a known issue that was fixed or not.
I can't get any type of port forwarding or DMZ to work with this router.
I made sure to check everything in the sticky before I posted and it all checks out.
I'm using Vista, but I've tried it on a computer with XP as well. I'm using the standard windows firewall, but I also tried disabling it.
I'm using the original 1.10 firmware, I don't know if this is a known issue that was fixed or not.
On our LAN we have a SBS server and Level Platforms server and soon to be another Ticket Server all hosting an app runnin on 443. OWA, Service Center and Spiceworks Help Desk.
Each has it's own URL:
Remote.domain.com/owa
Sc.domain.com/owa
Support.domain.com
How can I forward Https to these servers? The one company said some Can port forward by URL another guy said you can forward to your internal dns
Using Cisco IOS 12.x+ on a router.How would create an ACL that will only allow access to a port from the inside only after it has been established. i.e. similar to port triggering? Inside host 10.1.1.60 needs to use port 61200 for bit torrent. Dont want the port to be visible as open to the global net accept when the host 10.1.1.60 establishes the connection first.That way a port doesnt have to be left open 24-7.
View 4 Replies View RelatedRecently setting up a RV042G for my SOHO. Everything seems to be fine except for SSL port forwarding. I know the router's external static IP is reachable because I test it out with remote management functionality from an external IP. Port forwarding also works correctly because I have other behind the router servers in both UDP and TCP working flawlessly. PPTP VPN also works corrrectly. What I can't get it to run is an Apache server. Looks to me RV042G kind of drop all SSL or HTTP ports from the WAN side.
Configuration:
- 4 port forward rule under "Setup/forwarding" for 80/8080/443 and 8443 all to the webserver with a static IP.
- Firewall page I have Firewall, SPI, DoS enabled.
- Added a firewall rules to allow all HTTP and HTTPS traffic from WAN1 to the webserver static IP.
- Toggle Block WAN Request, HTTPS and multicast does not affect the result.
- Toggle and mapping the remote management port to other port beside 443 does not affect the result.
The same setup will works corretly under my old Netgear FVS router. Am I missing something in RV042G setup?
My internet works. However port forwarding does not work. I want to port forward from the outside to inside obviously. I get an error in my log file which Ill show you and then I will share the running-config I have tried using this method found elsewhere.
========================================================================================================
ATTEMPTED CONFIG
object network inside-host
host 192.168.100.4
nat (inside,outside) static interface service tcp 3389 3389
access-list Outside-2-Inside line 1 extended permit tcp any host 192.168.100.4 eq 3389 log informational interval 300
access-group Outside-2-Inside in interface outside
[code]....
I'm trying to do a normal port forward on a ASA 5505 with 9.1(1) and it is not working as it should.There are two ports that I want to forward, TCP 32000 and TCP 32001, from the outside interface.I tried a Auto NAT that gave rpf-check drop. [code]
I have tried diffrent configurations on this for several hours now and I cant get it to work.Could this be asymetric NAT with the dynamic rule? How can I troubleshoot this in a smart way?
i´m trying to make a traditional port forward (http to http) on our new asa5510. Previous releases off 5505 and software prior 8.3 was no problem. Could someone tell me how do it in new 8.4 version? I ám a rookie on the new ASA series!
If nothing makes sense in this configuration please give example on how to do it correct. The object on the inside is SRV02 wich is running a webserver on port 80. So i want to open upp for http on outside interface and forward that traffic to srv02 (inside webserver)
I consider the NAT mechanism to be quite straight forward, but although the firewall ACLs allow the traffic, it is being denied. The ASDM log and packet-tracer indicate the problem being an ACL.
# the internal resource
object network mabe-mbp
host 10.0.0.36
!
# these are ALL of the rules on the outside/inside interfaces
access-list outside_access_in extended permit tcp host 1.2.3.90 any eq 12380 log disabled
access-list outside_access_out extended permit ip any any log
access-list inside_access_in extended permit ip any any log
access-list inside_access_out extended permit ip any any log (code)
i go to setup/port forwarding and it has every port except port 22 available to forward. what's up with that?
View 1 Replies View RelatedI want to forward syslog messages that I receive in my Cisco Works server to another server,what is the best way to accomplish this. I'm running LMS3.2 on Solaris 10.
View 3 Replies View RelatedI'm trying to set up a security system.How can I port forward an Sagemcon SE-567,and Frontier ISP?
View 1 Replies View Related