Cisco Routers :: Forward Port 22 On Rv016?
May 29, 2013i go to setup/port forwarding and it has every port except port 22 available to forward. what's up with that?
View 1 Replies
ADVERTISEMENT
Cisco Routers :: RV016 - WAN 1 Port Reset To 0.0.0.0
Oct 19, 2011We are deploying a new batch of RV016 with the latest firmware (4.0.4.02). We are using 3 WAN ports for internet access (WAN1, WAN2, WAN3)The WAN ports connects to Cicso 800 series adsl modem with DHCP.The RV016 WAN1 port setting regularly resets to 0.0.0.0 despite that the modem dhcp is still up and running. A cold boot, resets all the configuration and WAN1 port start working againg a new ip.
All three WAN ports are set to automatically obtain ip from the modems.We have tried several modems, and even swap WAN ports, but the error is persistant to WAN1 only.
WAN2 and WAN3 are up and running without any errors. This error is persistant with WAN1 only.We have also configured a manual ip on WAN1, and after a few hours of operation on all 3 ports, traffic on WAN1 comes to a halt.We have the same error on 3 units we received last week.All there modem are configure on different subnets.It does not seems to be a configuration error with the modem as they work perfectly well with the WAN2, WAN3 ports.We also tested a RV016 out of the box using the wizard setup, without any extra setting/configuration, and we got the same error after a few hours of operation.
Cisco Routers :: RV016 - Port VPN Setting Up A Failover
Sep 13, 2012I was wondering how does failover works on Cisco Small Business RV016. Specifically, I am interested when one WAN line stop working, and all the computers in the LAN start using another line. Does it means that IP addresses of the computers in the LAN will change, or they stay the same? If they change can I set it up that they always stay the same no matter which input WAN they are using?
View 1 Replies View RelatedCisco Routers :: RV016 - Wan Port Is Showing Half Duplex?
Oct 20, 2011On RV016 router WAN port 1 is showing Half duplex wen i check it in Port setup but when i check it on Port status its showing me as Half duplex, how can we force it to make it full duplex.
View 2 Replies View RelatedCisco Routers :: RV016 10 / 100 16-Port VPN Router - IPsec Is Not Working?
Oct 14, 2012Problem: IPsec VPN setup seems ok (Client to gateway) but is not responding from client requests. However, remote manage works, PPTP works.
My environment:
Hardware: RV016 10/100 16-Port VPN Router
Firmware: v4.2.1.02 (Jan 18 2012 14:10:55)
Clients: Mac OS X 10.8 (integrated VPN client) , Windows 7 (build in VPN client) OR both with NCP-E VPN client.
None of the above works with IPsec. I have tried all kinds of combinations. I don't think the problem is wether I use Group1 or Group2 or DES or AES...It must be something else... Neither of the built-in VPN (IPsec) clients in Mac OS X or Windows can be configured in an easy way. BUT the NCP-E client can. I have tried to set it up to exactly meet the settings on the server but no progress...How do I setup an IPsec VPN group so that I can use any of my VPN clients to work?
PS. I have also tried the client that comes delivered. 1- It does not work and 2- it's only available for Windows.
Cisco Routers :: RV016 / RV042 / RV082 Internal Port Forwarding?
May 16, 2012I'd like to setup a WCCP in those routers, but as I read, it's not possible.
Another way to circumvent this limitation is to foward a request to the router from the LAN port 80 to a LAN IP, something like:
LAN 1 192.168.1.100:80 -> router -> LAN 2 192.168.1.101:80
Cisco Routers :: RV042G Can't Forward SSL Port 443
Aug 26, 2012Recently setting up a RV042G for my SOHO. Everything seems to be fine except for SSL port forwarding. I know the router's external static IP is reachable because I test it out with remote management functionality from an external IP. Port forwarding also works correctly because I have other behind the router servers in both UDP and TCP working flawlessly. PPTP VPN also works corrrectly. What I can't get it to run is an Apache server. Looks to me RV042G kind of drop all SSL or HTTP ports from the WAN side.
Configuration:
- 4 port forward rule under "Setup/forwarding" for 80/8080/443 and 8443 all to the webserver with a static IP.
- Firewall page I have Firewall, SPI, DoS enabled.
- Added a firewall rules to allow all HTTP and HTTPS traffic from WAN1 to the webserver static IP.
- Toggle Block WAN Request, HTTPS and multicast does not affect the result.
- Toggle and mapping the remote management port to other port beside 443 does not affect the result.
The same setup will works corretly under my old Netgear FVS router. Am I missing something in RV042G setup?
Belkin Routers :: F7D4302 - Can't Forward A Third Port
Mar 6, 2013I have two ports forwarded on my F7D4302 router, used for security cams, trying to add a third. The router does not open the third port. I've tried several different configuration without success. Since I've already been successful with the first two, I am puzzled.
View 2 Replies View RelatedRouters / Switches :: How To Port Forward A Cisco DDR2200
Apr 2, 2011Looking to remote access my CCTV DVR, need to port forward. Set up dyndns domain already.
View 1 Replies View RelatedCisco Routers :: Port Forward Not Working In RV120W?
Aug 28, 2011I'm trying to setup a simple port forward in the RV 120W Router, but can't seem to get it to work.
I created a custom service called RDP for TCP port 3389-3389. I added a Port Forward to Always Allow the service RDP, from any source IP to destination IP 192.168.50.23. I have tried it with "same as incoming port" and also specified port 3389 for forward from and to.
Firewall access rule is enabled and set to Inbound, Always Allow, RDP service, Any source & destination IP, DNAT IP is 192.168.50.23.
Routers / Switches :: Port Forward With A Netgear DGN2200 V3?
Oct 9, 2012I cant work out how to get my Netgear DGN2200v3 to port forward.Portforward.com describes how to port forward for a Netgear DGN2200 but NOT for the DGN2200v3.The difference between the DGN2200 and the DGN2200v3 is that when I log into the router and go to port forwarding/port triggering there is no box to fill in the server IP address. It just says service name, service type, starting port, ending port.
View 1 Replies View RelatedCisco Routers :: Srp521 Port Forward Based On Source Ip
Dec 20, 2012I have a customer with a Sonic wall that I want to replace with a 521.He currently has port forwaring setup so that only 3 ip addresses can access the port forward. Everyone else is dropped. Is there a way to do something similar?I can make it work for a single one via the DMZ tab with a source ip address. but there is not a way I can find to add the allow for the other two remote connections.
View 1 Replies View RelatedCisco Routers :: Port Forward On RV180W / Connection Has Timed Out
Sep 25, 2012Until now i used a D-Link router with a DDNS account on dyndns.com. I used the ddns account for accesing the surveillance camera when i wasen't at home. The ports for the cameras are 80 and 83.I have a static ip and when i tiped the IP on broswer i was able to acces the camera with port 80 and when i tiped ip:83 i was able to acces the camera with port 83.Today i got a RV180W router made de configuration (ddns, port forwarding) but now when i type the ip address i can't see the camera, instead the router interface is loading and when i tipe ip:83 i get the message "The connection has timed out".I've tryed diferent things but i can acces the camera only by internal ip (192.168.1.x) but using the DDns address i can't acces the camera.
View 3 Replies View RelatedCisco Routers :: RV042 Port To Forward 11101 Through 11164
Mar 11, 2013I feel I'm having an issue, and I'm unsure why.We own a Cisco RV042 V03 with firmware 4.0.4.02-tm.
I have successfully demonstrated that I can open and forward ports 8001 & 8081 from the WAN side to a specific IP Address on the LAN side.I performed this by going to Setup --> Forwarding, then setup Port Range Forwarding & Port Triggering.
I also changed Setup --> UPnP, then UPnP Function is set to Yes.
My issue is that we would also like to forward 11101 through 11164 in the same maner. However, when I step through the same method described above, it does not seem to work.So now I am confused how I could open the 8001 & 8081 ports, but not the higher 11101 thru 11164 ports.
Routers / Switches :: Linksys E3000 Router Will Not Forward Port 443
Dec 20, 2011I attached an Iomego Home Media network hard drive to my Linksys E3000 router (via ethernet cable). Before setting up the remote access on the Iomega, I forwarded the ports that it wanted (443 and 21) to the static IP of the Iomega. I checked to see that they were open using yougetsignal.com and they were both open. After setting up the remote access on the Iomega, the 443 port closed and I cant even get into the "manage storage device" page for the Iomega. Iomega uses TZo for the domain names. They tell me that the association is made between the name and my public IP address. My router is out of warranty since Sept, so Linksys wont give me the time of day. I contacted my ISP and while they block a couple of ports, 443 is not one of them.I've installed the latest firmware (1.0.04 - Build 6). Reset and rebooted numerous times, Port 443 remains closed.
View 8 Replies View RelatedPort Forward Through 2 Routers - Linksys E1000 / Westell 7500
Feb 20, 2012I have a westell 7500 with fairpoint service hooked up to my DSL line. I have disabled woreless on the westell. I then have a linksys e-1000 connected to the westell 7500. I have one wired computer on that network, my imac/game server, my main PC, my wii and an ipod touch connected connected to the linksys e-1000 wirelessly. I want to forward port 25565 through these routers to my imac. How can I do this? I have tried portforward.com, and a million other things.
View 2 Replies View RelatedCisco Routers :: RV120 VPN Firewall Unable To Forward Port 1723
Jul 25, 2011I'm having a problem forwarding port 1723. What i'm trying to do is to use VPN to access my server pc and I don't want to use the VPN software that is in the router. When I telnet the port it goes through but when i try to access it outside of the office I can't get through. I've been using [URL] to check port 1723 and I get this:
Error: I could not see your service on XX.XX.XX.XX on port (1723)
Reason: Connection refused
Routers / Switches :: Port Forward On A SAGEMCOM SE567 Router To Be Able To View DVR?
Jun 12, 2011How do I port forward on a SAGEMCOM SE567 router to be able to view my DVR from a remote location?
View 3 Replies View RelatedBelkin Routers :: No Support For F9J1005v1 - Port Forward / Firmware Update?
Dec 27, 2012There is no support for Model F9J1005v1. How do I update its firmware and how do I port forward on the same
View 2 Replies View RelatedCisco Routers :: RV042 / Forward All Packets To Port 9000 From WAN To Single IP Address On Network?
Nov 2, 2011I have a RV042 using (for now), just the single WAN interface. I am trying to forward all packets to port 9000 from the WAN to a single IP address on the network. I've set up both forwarding rules under Setup -> Forwarding and under the Firewall -> Access Rules.I cannot connect to my device from the outside world, however. Is there something I'm missing?
View 4 Replies View RelatedCisco Firewall :: How To Forward Hit Request On 5555 Port To 80 Port
Nov 7, 2011I have one server 172.16.0.100 and i nat this server to a public ip X.X.X.5 and i open RDP for this public ip.Now when i access Remote desktop on this public ip x.x.x.5 it open perfectly.Now my senario is that i want to open a http url on port 5555,server ADMIN open port 80 for this URL on LOCAL lan(http://172.16.0.100:80)So how can i map port 5555 to port 80 on ASA 5520.so when i hit URL [URL]
View 5 Replies View RelatedTP-Link ADSL2+ Wireless :: TD-W8968 - Forward External Wan Port Like 49150 To LAN IP On Port 22?
Nov 18, 2012Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmwae Version : latest
ISP : telecom italia business on ipatm
How to Forward an external wan port like 49150 to lan ip on port 22?In the control pannel I can set only one port , and this port will be the same where the connection will be router to the lan ip ,therefore If I set the port 22 , the connection will be natted to the 22, but how to set a different external port to a specified different lan ip port?
Linksys Wired Router :: RV042G / Create Service To Forward Public Port 9010 To Internal IP Address With Port 23?
Oct 12, 2012Is it possible to create a service which will forward public port 9010 to an internal IP address with port 23?First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80?
View 1 Replies View RelatedCannot Port Forward Or Open Port For Utorrent
Sep 18, 2012I have only recently noticed a HUGE decrease in my Utorrent speeds, so i thought i would have a gander and lo and behold.apparently the port Utorrent uses wasn't open. Now, i have tried about 10 different port numbers, made sure Utorrent is being accepted by Norton 360 Firewall,followed complicated directions to (i think) foward ports, and also follow directions to open a specific port.Nothing has worked so far, Utorrent still comes back with a port closed error.
View 1 Replies View RelatedCisco :: OID For Enabling And Disabling Port For RV016 Router?
Jul 20, 2011where I can find the OID for enabling and disabling a port for the RV016 router? I performed a snmpwalk but I couldn't find it.
View 1 Replies View RelatedCisco WAN :: Does The RV016 Port Forwarding Bypass Firewall Default Rules
Jun 20, 2011when opening SSH service to a Database Administrator within my LAN, that has a RV016 as the default gateway. So confidence, I just set up a port forwarding in Setup > Forwarding and everything works fine, cool.
However, I do not want this to be a public access, I need a specific firewall rule for a specific external IP address (only the DBA fixed IP Internet might connect to my database server through SSH).
O noticed that when a port forwarding is created within RV016, it bypass the firewall default rules and wide-opens the service (port) to the web. Conceptually, this is correct, as port forwarding is a network translation, but I expected that my firewall had work over this.
My current solution was to create a "Deny from all" rule at port 22 and then create one additional rule that allows traffic from an specific IP at port 22.
Cisco WAN :: Port Forward To With 837
Jul 11, 2011My cisco 837 is connected to a ADSL Router by Ethernet Cable. I have forwarded the telnet port from my ADSL Router to the LAN IP of the Cisco Router so that i can connect to it Remotely but it is not working. I am able to telnet internally but from Internet it is not working. I am not using Cisco Router for ADSL Connectivity.
View 5 Replies View RelatedLinksys Wired Router :: Can't Ping RV016 On WAN1 Port (external IP)
Feb 1, 2011I am trying to setup an RV016 router to do "1 to 1 NAT". I am starting with setting the external IP address of my RV016 to 10.8.58.219 on the WAN1 port, and LAN IP 10.10.20.254. Simple enough. When I connect my laptop to port1 on the router's LAN side I can ping the router's external AND internal IP addresses fine; But I can not ping from outside when connected through WAN1 port.I am performing a simple local test with an external hub, I put a patch cable from WAN1 port to the hub, another patch cable from port 1 on LAN side to the same hub, and from my laptop to the hub. When I use my laptop's IP address with the internal schema (10.10.20.100 for example) I can ping both WAN1 and LAN IP's; but when I use on my laptop the external IP schema (10.8.58.100 for example) I can not ping it. Therefore is not working when I connect my router to the real network.I went into the web setup pages of the router and dissabled: firewall and basicaly all security "blocks" it has, and leave it open for my testing.
View 1 Replies View RelatedHow To Forward Port 21
Jan 2, 2011I have just purchased a nas drive. I want to be able to access my files from anywhere. I believe if i setup FTP i can view the files over the web. from what i have been told i need to forward port 21 to the ip address of the nas drive.
View 6 Replies View RelatedCisco Routers :: What Is The Replacement SKU For RV016
Jan 27, 2013I would like to ask if what is the replacement for RV016? Is there any on the ISR G2 that can be set as a mulit-WAN router? Meaning can handle for more than two WAN connections.
View 2 Replies View RelatedCisco Routers :: Failing RV016 Or ISP?
Jan 22, 2010I have a rv016 that's been in 24x7 operation since I bought it a few years back. It is out of warranty. It is connected to three cable modems on WANs 1-3. Behind it are a bunch of PCs getting IPs via DHCP. There is a gateway to gateway vpn tunnel setup on wan3 to a rv082 at another site. There is a forwarding entry for http to an internal http server. Everything else is pretty much default.
The router is primarily used to aggregate bandwidth for uploading large numbers of photos. The systems behind the router initiate the uploads and the router automatically load balances the outgoing bandwidth.
This was all working fine until just recently. The ISP is Knology who is upgrading each of the 8m/768k cable modems to 25m/5m. They are also moving from DOCSIS 1 to DOCSIS 3. They are currently in the middle of this upgrade and have upgraded the modems to DOCSIS 3 as well as the speeds to 12m/2m. The problem is that the rv016 Network Service Detection, which is set to "Default Gateway" indicates that the modems fail randomly. Usually only one will be failed, but up to two will fail the Network Service Detection simultaneously.
Knology insists that there is nothing wrong with their modems. I have removed a modem from the rv016 when Network Service Detection indicates it is in a failed state and connected it directly to a computer. It will work, but it has a different IP address and default gateway. As soon as I connect it back to the rv016, it works there too, but on the original IP address and gateway. I've only tried this test this twice so far, so it is a bit inconclusive.
Speed tests behind the rv016 are the same as directly connected to one of the cable modems. The router works normally as it has for years. Nothing else is acting funny.
So my question is, is the rv016 failing or is the ISP having problems?
Cisco Routers :: RV016 V4.2.1.02 - No Web Browsing
Jul 22, 2012Problems on RV016 the firmware, Firmware Version : v4.2.1.02 (Jan 18 2012 14:10:55) on port PPPoE mode. It makes the dial, but not Web browsing correctly. The solution was to return the old version of firmware.
View 1 Replies View RelatedCisco Routers :: Upgrade RV016 From 3.0.2.01-tm To 4.0.4.02?
Nov 22, 2011I am trying to upgrade my RV016 from 3.0.2.01-tm to 4.0.4.02. I have not received any messages and the log has nothing. I have left the computer and switch for 2 hours and it never seems to end. (serial no. DF0006200812).
View 1 Replies View Related