Cisco Routers :: RV120 VPN Firewall Unable To Forward Port 1723
Jul 25, 2011
I'm having a problem forwarding port 1723. What i'm trying to do is to use VPN to access my server pc and I don't want to use the VPN software that is in the router. When I telnet the port it goes through but when i try to access it outside of the office I can't get through. I've been using [URL] to check port 1723 and I get this:
Error: I could not see your service on XX.XX.XX.XX on port (1723)
Reason: Connection refused
View 4 Replies
ADVERTISEMENT
Apr 10, 2012
Port forwarding on rv120 does not work. I have followed the workaround instructions: so i have created a firewall access rule on incoming port 21 to an internal ip address on the same port. The router has created the forwarding port rule. But port forwarding does not work. I have tried to use a custom service but nothing!
The router is reachable from wan, I can access via DNS the configuration page and I can ping the router on wan port.
View 10 Replies
View Related
Sep 11, 2011
We have just acquired a Cisco RV120W Firewall Router and we are experiencing issues with this router. I've read some threads related to port forward issue with RV120W before writing this new topic.
We have 2 locations (site A and site B) connected with a Site to Site VPN (PPTP) running under Windows Server 2008 R2 with TMG 2010. This Site to Site VPN worked very well until we replaced our old router with the RV120W at site B. Since this moment, our engineers are not able to make the site to site VPN work again. The TMG box are located just behind the router.
We have followed some threads about Port Forwarding but it did not solve our issue (others port forwarding rules for RDP for example work). Our RV120W is running the last stable firmware (1.0.2.6) provided by Cisco.
View 1 Replies
View Related
Feb 2, 2013
So I need to forward certain ports to play/log-in game:
TCP: 80, 443, 2099, 5222, 5223, 8393-8400
UDP: 5000:5500
I did forward them in my router and checked them with PFPortChecker, every port seems to open except 2099, I don't understand why.Note that I disabled Windows Firewall, Router's Firewall, and I'm using Kaspersky Internet Security which I disable while checking ports/logging to game
View 19 Replies
View Related
Jan 19, 2013
I have unchecked 'Block Anonymous Internet Requests” but then also I am not able to forward ports like 80 and port 443.
View 1 Replies
View Related
Nov 7, 2011
I have one server 172.16.0.100 and i nat this server to a public ip X.X.X.5 and i open RDP for this public ip.Now when i access Remote desktop on this public ip x.x.x.5 it open perfectly.Now my senario is that i want to open a http url on port 5555,server ADMIN open port 80 for this URL on LOCAL lan(http://172.16.0.100:80)So how can i map port 5555 to port 80 on ASA 5520.so when i hit URL [URL]
View 5 Replies
View Related
Sep 27, 2012
I think i have tried everything i could think of to forward port 5900 with no luck. iIhave e4200. it is for RealVNC application. I followed steps from here: i have windows 7 and nortonn internet security. i disabled the firewall and added a rule to forward port 5900 in windows but did not work either.
View 9 Replies
View Related
Jul 11, 2011
I want to build a "hub and spoke" topology for one of my clients. For the "HUB" , I'm planning to use an SA540, with a static public IP provided by a 4Mb SDSL. For the "spokes" (21 at the moment), I'm planning to use RV120. They will be behind a NAT, provided by a "SAGEM LIVEBOX", and a static public IP. The boss will connect to the HUB using Cisco VPN client, or quickVPN, and get access to all the spokes. Some spokes will have to connect to each other, via the HUB. I searched a long time on this forum and reading documentation, but I didn't find at the moment the answer to my question : is this topology suitable with the choosen hardwares ?
View 7 Replies
View Related
Aug 26, 2012
Recently setting up a RV042G for my SOHO. Everything seems to be fine except for SSL port forwarding. I know the router's external static IP is reachable because I test it out with remote management functionality from an external IP. Port forwarding also works correctly because I have other behind the router servers in both UDP and TCP working flawlessly. PPTP VPN also works corrrectly. What I can't get it to run is an Apache server. Looks to me RV042G kind of drop all SSL or HTTP ports from the WAN side.
Configuration:
- 4 port forward rule under "Setup/forwarding" for 80/8080/443 and 8443 all to the webserver with a static IP.
- Firewall page I have Firewall, SPI, DoS enabled.
- Added a firewall rules to allow all HTTP and HTTPS traffic from WAN1 to the webserver static IP.
- Toggle Block WAN Request, HTTPS and multicast does not affect the result.
- Toggle and mapping the remote management port to other port beside 443 does not affect the result.
The same setup will works corretly under my old Netgear FVS router. Am I missing something in RV042G setup?
View 3 Replies
View Related
May 29, 2013
i go to setup/port forwarding and it has every port except port 22 available to forward. what's up with that?
View 1 Replies
View Related
Oct 15, 2012
I am working overseas for a small company, trying to get an RV120 VPN router to connect to our network back home. Part of the problem is that I have to use a DSL modem here which is also a router, and so the WAN IP given to the modem is not the same one used by the VPN router.
Do we need to create a bridge between the two routers so that the VPN router can use the WAN IP from the ISP instead of a DHCP address on the local network? Or is this the wrong approach?
View 3 Replies
View Related
Sep 20, 2011
I always seem to have problems when trying to configure port forwarding on cisco routers. I've even tried the instructions I have for a cisco 1811, but no luck. I have a cisco 871 and a computer that has VNC installed on it. I want to be able to access that computer from out side the network using the external ip address and port 5950. People outside the network will be able to open vnc viewer and type in *external ip address*:5950 and it will be directed to the computer with a static internal ip address of 10.12.0.10. What commands do I use to do this?
View 4 Replies
View Related
Mar 6, 2013
I have two ports forwarded on my F7D4302 router, used for security cams, trying to add a third. The router does not open the third port. I've tried several different configuration without success. Since I've already been successful with the first two, I am puzzled.
View 2 Replies
View Related
Apr 2, 2011
Looking to remote access my CCTV DVR, need to port forward. Set up dyndns domain already.
View 1 Replies
View Related
Aug 28, 2011
I'm trying to setup a simple port forward in the RV 120W Router, but can't seem to get it to work.
I created a custom service called RDP for TCP port 3389-3389. I added a Port Forward to Always Allow the service RDP, from any source IP to destination IP 192.168.50.23. I have tried it with "same as incoming port" and also specified port 3389 for forward from and to.
Firewall access rule is enabled and set to Inbound, Always Allow, RDP service, Any source & destination IP, DNAT IP is 192.168.50.23.
View 7 Replies
View Related
Feb 25, 2013
We have a Cisco RV042 Router. Two ISP's and using dual wan setup. We are trying to connect to a pc on our network using rdp. The pc we are trying to connect to has been configured to listed for rdp on port 3390. I have tested it internally and connect via rdp thru said port.
I have setup a port forward rule on the router to forward port 3390 to the ip of the pc. I have setup protocol binding for port 3390 service on wan1.
View 4 Replies
View Related
Nov 20, 2012
My internet works. However port forwarding does not work. I want to port forward from the outside to inside obviously. I get an error in my log file which Ill show you and then I will share the running-config I have tried using this method found elsewhere.
========================================================================================================
ATTEMPTED CONFIG
object network inside-host
host 192.168.100.4
nat (inside,outside) static interface service tcp 3389 3389
access-list Outside-2-Inside line 1 extended permit tcp any host 192.168.100.4 eq 3389 log informational interval 300
access-group Outside-2-Inside in interface outside
[code]....
View 4 Replies
View Related
Jan 19, 2013
I'm trying to do a normal port forward on a ASA 5505 with 9.1(1) and it is not working as it should.There are two ports that I want to forward, TCP 32000 and TCP 32001, from the outside interface.I tried a Auto NAT that gave rpf-check drop. [code]
I have tried diffrent configurations on this for several hours now and I cant get it to work.Could this be asymetric NAT with the dynamic rule? How can I troubleshoot this in a smart way?
View 2 Replies
View Related
Oct 11, 2011
i´m trying to make a traditional port forward (http to http) on our new asa5510. Previous releases off 5505 and software prior 8.3 was no problem. Could someone tell me how do it in new 8.4 version? I ám a rookie on the new ASA series!
If nothing makes sense in this configuration please give example on how to do it correct. The object on the inside is SRV02 wich is running a webserver on port 80. So i want to open upp for http on outside interface and forward that traffic to srv02 (inside webserver)
View 16 Replies
View Related
Jan 1, 2012
I consider the NAT mechanism to be quite straight forward, but although the firewall ACLs allow the traffic, it is being denied. The ASDM log and packet-tracer indicate the problem being an ACL.
# the internal resource
object network mabe-mbp
host 10.0.0.36
!
# these are ALL of the rules on the outside/inside interfaces
access-list outside_access_in extended permit tcp host 1.2.3.90 any eq 12380 log disabled
access-list outside_access_out extended permit ip any any log
access-list inside_access_in extended permit ip any any log
access-list inside_access_out extended permit ip any any log (code)
View 2 Replies
View Related
Oct 9, 2012
I cant work out how to get my Netgear DGN2200v3 to port forward.Portforward.com describes how to port forward for a Netgear DGN2200 but NOT for the DGN2200v3.The difference between the DGN2200 and the DGN2200v3 is that when I log into the router and go to port forwarding/port triggering there is no box to fill in the server IP address. It just says service name, service type, starting port, ending port.
View 1 Replies
View Related
Dec 20, 2012
I have a customer with a Sonic wall that I want to replace with a 521.He currently has port forwaring setup so that only 3 ip addresses can access the port forward. Everyone else is dropped. Is there a way to do something similar?I can make it work for a single one via the DMZ tab with a source ip address. but there is not a way I can find to add the allow for the other two remote connections.
View 1 Replies
View Related
Sep 25, 2012
Until now i used a D-Link router with a DDNS account on dyndns.com. I used the ddns account for accesing the surveillance camera when i wasen't at home. The ports for the cameras are 80 and 83.I have a static ip and when i tiped the IP on broswer i was able to acces the camera with port 80 and when i tiped ip:83 i was able to acces the camera with port 83.Today i got a RV180W router made de configuration (ddns, port forwarding) but now when i type the ip address i can't see the camera, instead the router interface is loading and when i tipe ip:83 i get the message "The connection has timed out".I've tryed diferent things but i can acces the camera only by internal ip (192.168.1.x) but using the DDns address i can't acces the camera.
View 3 Replies
View Related
Mar 11, 2013
I feel I'm having an issue, and I'm unsure why.We own a Cisco RV042 V03 with firmware 4.0.4.02-tm.
I have successfully demonstrated that I can open and forward ports 8001 & 8081 from the WAN side to a specific IP Address on the LAN side.I performed this by going to Setup --> Forwarding, then setup Port Range Forwarding & Port Triggering.
I also changed Setup --> UPnP, then UPnP Function is set to Yes.
My issue is that we would also like to forward 11101 through 11164 in the same maner. However, when I step through the same method described above, it does not seem to work.So now I am confused how I could open the 8001 & 8081 ports, but not the higher 11101 thru 11164 ports.
View 3 Replies
View Related
Dec 20, 2011
I attached an Iomego Home Media network hard drive to my Linksys E3000 router (via ethernet cable). Before setting up the remote access on the Iomega, I forwarded the ports that it wanted (443 and 21) to the static IP of the Iomega. I checked to see that they were open using yougetsignal.com and they were both open. After setting up the remote access on the Iomega, the 443 port closed and I cant even get into the "manage storage device" page for the Iomega. Iomega uses TZo for the domain names. They tell me that the association is made between the name and my public IP address. My router is out of warranty since Sept, so Linksys wont give me the time of day. I contacted my ISP and while they block a couple of ports, 443 is not one of them.I've installed the latest firmware (1.0.04 - Build 6). Reset and rebooted numerous times, Port 443 remains closed.
View 8 Replies
View Related
Feb 20, 2012
I have a westell 7500 with fairpoint service hooked up to my DSL line. I have disabled woreless on the westell. I then have a linksys e-1000 connected to the westell 7500. I have one wired computer on that network, my imac/game server, my main PC, my wii and an ipod touch connected connected to the linksys e-1000 wirelessly. I want to forward port 25565 through these routers to my imac. How can I do this? I have tried portforward.com, and a million other things.
View 2 Replies
View Related
Sep 8, 2010
Successfully creating a port-forward in ASA5510, ASA version 8.3(1) ASDM6.3(1)?I have spend hours now trying, but I'm still unsuccessful.What I want is a simple: "if this particular ip-adress hits the wan interface on this tcp-port redirect to this inside ip-address on this tcp-port.I have never had any trouble on any other firewall creating something like this, but the ASA is killing me.
View 10 Replies
View Related
Sep 26, 2012
I have a cisco asa 5520. i need to forward telnet to a router on the inside interface. Here is what i have done so far but it doesnt seem to be working.
I have created an access-list that looks like this:
access-list 102 extended permit tcp any host 10.10.60.2 eq telnet
But when do this it still doesnt forward my request to the router at 10.10.60.2 . So just to explain what im trying to do. I use Putty, i am putting the outside interface IP into putty, selecting telnet and opening the session. i need the outside interface to see this request and know to forward port 23 to the router on the inside interface with IP 10.10.60.2. The ASA is running version: asa842-k8.bin
View 3 Replies
View Related
May 7, 2013
i can't do it with ASDM and try to use command but still fail
nat (inside,outside) source static inside-10.18.20.162 4F-1.1.1.2
it is working fine for the above command if there is more than one public ip, in case 1.1.1.1 is for firewall interface public ip?if i have only one public ip and i would like to forward http traffic to my internal network? how can i use command to do that?
View 8 Replies
View Related
Jun 12, 2011
How do I port forward on a SAGEMCOM SE567 router to be able to view my DVR from a remote location?
View 3 Replies
View Related
Dec 27, 2012
There is no support for Model F9J1005v1. How do I update its firmware and how do I port forward on the same
View 2 Replies
View Related
Feb 1, 2011
I have small business server 2003 setup as a DC and did not install exchange, i use hosted exchange. i am trying to setup vpn and have opened port 1723 on both of my router. my network routes through a wireless router(192.168.1.1) (port 1723 forwarded to .1.104) to a second wireless router (192.168.2.1) to my server with two nic cards (.2.2 - external and .2.103 - internal) (port 1723 forwarded to .2.2) i can telnet 192.168.2.2 1723, .2.103, .1.104 - my ip of my second router handed by the first router. my server in handling dhcp and it is disabled on my .2 router. I CAN NOT telnet my public ip handed to 1.1 from the ISP(my internet IP). it tries for about 30 secs and dies.
View 8 Replies
View Related
Nov 2, 2011
I have a RV042 using (for now), just the single WAN interface. I am trying to forward all packets to port 9000 from the WAN to a single IP address on the network. I've set up both forwarding rules under Setup -> Forwarding and under the Firewall -> Access Rules.I cannot connect to my device from the outside world, however. Is there something I'm missing?
View 4 Replies
View Related
