Cisco Routers :: Port Forward On RV180W / Connection Has Timed Out

Sep 25, 2012

Until now i used a D-Link router with a DDNS account on dyndns.com. I used the ddns account for accesing the surveillance camera when i wasen't at home. The ports for the cameras are 80 and 83.I have a static ip and when i tiped the IP on broswer i was able to acces the camera with port 80 and when i tiped ip:83 i was able to acces the camera with port 83.Today i got a RV180W router made de configuration (ddns, port forwarding) but now when i type the ip address i can't see the camera, instead the router interface is loading and when i tipe ip:83 i get the message "The connection has timed out".I've tryed diferent things but i can acces the camera only by internal ip (192.168.1.x) but using the DDns address i can't acces the camera.

View 3 Replies


ADVERTISEMENT

Cisco Routers :: Forward Range Of Ports With RV180W?

Oct 14, 2012

I am new to the RV180W. I am running the most recent firmware--version 1.0.1.9.
 
I am having trouble getting FTP to work with my QNAP NAS.
 
QNAP indicates that I should forward ports 55536-56559 to my NAS. I created a custom service to accomplish this, and then, under port forwarding, I selected the service and forwarded it to the private IP that corresponds with the NAS.
 
However, the port forwarding configuration only allows me to specify *ONE* internal port. With other routers I have always specified the same private port *RANGE* that corresponds with the public ports that I have opened up.

View 11 Replies View Related

Cisco Routers :: RV180W And Server Logs / How To Get It To Forward Remote IP

Mar 25, 2013

I updated my RV180W to the latest firmware and found that port forwarding works I started using it.I've just noticed that since changing over to the RV180W, my Apacher server logs show the router's IP address instead of the remote IP address - every remote request appears to come from  192.168.0.1.
 
How do I get it to forward the remote IP.

View 1 Replies View Related

Cisco Routers :: RV180W And Multiple VLANs Over Same Port?

Sep 27, 2012

I have a RV180W and a EnGenius EAP350 Access Point.  The EnGenius supports multiple SSID's and VLAN tags them.  If port 1 on the RV180W has VLAN 1 untagged and VLAN2 tagged, any connection to the EnGenius always gets an IP from the VLAN 1, even though they are connected to the SSID which is tagged with VLAN2. 

View 3 Replies View Related

Cisco Routers :: RV180W Port Forwarding On PPPoE

Oct 25, 2012

Some days ago I bought a new RV180W router with firmware 1.0.1.9. The router is configured with PPPoE and I need to forward some port (a basic operation for a router!!!). I try in every way but it doesn't work. My old router works well. [URL]

View 1 Replies View Related

Cisco Routers :: RV180W Port Forwarding In PPPOE

Dec 27, 2012

I bought a new RV180W router with firmware 1.0.1.9.The router is configured with PPPoE and I need to forward some port (a basic operation for a router!!!). I try in every way but it doesn't work. My old router works well.

View 1 Replies View Related

Cisco Routers :: VPN Connection Between Two RV180W?

Feb 5, 2013

I'm trying to make the VPN connection between two routers CISCO RV180w.I performed the basic configuration in cisco "server". I did the same in cisco "client".The following configuration and logs, do not know what to do ...
 
SERVER CONFIGURATION:
 IKE Policy Configuration: 
VPN Policy Configuration:
 CLIENT CONFIGURATION:

[code]....

View 8 Replies View Related

Cisco Routers :: RV180W - Any External Source IP For RV180W DMZ?

Apr 21, 2013

I got : RV180W router updated with the last firmware.Static IP for the DMZ host (Synology Server 212+) My problem is that I had try all combinaison since 10 days to get IP source in synology interface (to block IP's of bad connections...) but, I only see the RV180W adress....So impossible to block bad connections IP.

View 3 Replies View Related

Cisco Routers :: RV042G Can't Forward SSL Port 443

Aug 26, 2012

Recently setting up a RV042G for my SOHO. Everything seems to be fine except for SSL port forwarding. I know the router's external static IP is reachable because I test it out with remote management functionality from an external IP. Port forwarding also works correctly because I have other behind the router servers in both UDP and TCP working flawlessly. PPTP VPN also works corrrectly. What I can't get it to run is an Apache server. Looks to me RV042G kind of drop all SSL or HTTP ports from the WAN side.
 
Configuration:

- 4 port forward rule under "Setup/forwarding" for 80/8080/443 and 8443 all to the webserver with a static IP.

- Firewall page I have Firewall, SPI, DoS enabled.

- Added a firewall rules to allow all HTTP and  HTTPS traffic from WAN1 to the webserver static IP.

- Toggle Block WAN Request, HTTPS and multicast does not affect the result.

- Toggle and mapping the remote management port to other port beside 443  does not affect the result.
 
The same setup will works corretly under my old Netgear FVS router. Am I missing something in RV042G setup?

View 3 Replies View Related

Cisco Routers :: Forward Port 22 On Rv016?

May 29, 2013

i go to setup/port forwarding and it has every port except port 22 available to forward.  what's up with that?

View 1 Replies View Related

Cisco Routers :: RV180w - Map Drives Through PPTP Vpn Connection

Feb 18, 2013

I am working with a RV180w and need to map drives from the internal network to the VPN client but whenever I try to connect to a shared drive I continue to get authentication messages from the DC. Any useful guide for configuration in this scenario.  Internal subnet is on Windows 2008 domain.

View 1 Replies View Related

Cisco Routers :: RV180W - Setting Up WAN Static IP Connection

Jan 10, 2013

I've read and read about setting up the WAN static IP connection, and can't get it to work. I purchased this router to replace an older Linksys Router (WRT150N) so that I could better implement VPN. All I need is 2 remote connections. The Linksys Router has been working great with a static IP setting, so I figured all I need to do to is enter the same IP, subnet, gateway, and DNS settings in the RV180W and it should work fine. Well it doesn't provide any connection to the internet. As far as I can see, it has all the same settings set that the linksys has.
 
Is there something additional I must do for a WAN static IP setting setup.  I even contacted the ISP but they say their modem is fine and of-course they won't assist with the router. As soon as I connect the linksys back to the modem, I get access to the internet.
 
I'm no engineer, but something isn't allowing any Internet services.  LAN is fine. I attached a W7 laptop to the router, and it says it can't reach the internet due to something about proxy services. There is no proxy server so not sure what it is referring to.
 
By the way I tried another manufacturer router just to ensure that it wasn't a defective RV180W, but that router didn't connect either - same issue. If I set it up on my home service, both work albeit only with DHCP WAN settings.

View 9 Replies View Related

Cisco Routers :: Difference Between RV180W-E-K9-G5 And RV180W-A-K9-NA?

Dec 15, 2012

I would like to ask if what is the difference between RV180W-E-K9-G5 and RV180W-A-K9-NA specifically the -E and the -A.  As far as I know -A is the compliance code for Philippines.  Am I right?  If yes, what about -E?  There is a documentation for wireless complaince on Aeronet devices but what about these SB products?

View 9 Replies View Related

Belkin Routers :: F7D4302 - Can't Forward A Third Port

Mar 6, 2013

I have two ports forwarded on my F7D4302 router, used for security cams, trying to add a third. The router does not open the third port. I've tried several different configuration without success. Since I've already been successful with the first two, I am puzzled.

View 2 Replies View Related

Routers / Switches :: How To Port Forward A Cisco DDR2200

Apr 2, 2011

Looking to remote access my CCTV DVR, need to port forward. Set up dyndns domain already.

View 1 Replies View Related

Cisco Routers :: Port Forward Not Working In RV120W?

Aug 28, 2011

I'm trying to setup a simple port forward in the RV 120W Router, but can't seem to get it to work.
 
I created a custom service called RDP for TCP port 3389-3389.  I added a Port Forward to Always Allow the service RDP, from any source IP to destination IP 192.168.50.23.  I have tried it with "same as incoming port" and also specified port 3389 for forward from and to.
 
Firewall access rule is enabled and set to Inbound, Always Allow, RDP service, Any source & destination IP, DNAT IP is 192.168.50.23.

View 7 Replies View Related

Routers / Switches :: Port Forward With A Netgear DGN2200 V3?

Oct 9, 2012

I cant work out how to get my Netgear DGN2200v3 to port forward.Portforward.com describes how to port forward for a Netgear DGN2200 but NOT for the DGN2200v3.The difference between the DGN2200 and the DGN2200v3 is that when I log into the router and go to port forwarding/port triggering there is no box to fill in the server IP address. It just says service name, service type, starting port, ending port.

View 1 Replies View Related

Cisco Routers :: Srp521 Port Forward Based On Source Ip

Dec 20, 2012

I have a customer with a Sonic wall that I want to replace with a 521.He currently has port forwaring setup so that only 3 ip addresses can access the port forward.  Everyone else is dropped.  Is there a way to do something similar?I can make it work for a single one via the DMZ tab with a source ip address. but there is not a way I can find to add the allow for the other two remote connections.

View 1 Replies View Related

Cisco Routers :: RV042 Port To Forward 11101 Through 11164

Mar 11, 2013

I feel I'm having an issue, and I'm unsure why.We own a Cisco RV042 V03 with firmware 4.0.4.02-tm.
 
I have successfully demonstrated that I can open and forward ports 8001 & 8081 from the WAN side to a specific IP Address on the LAN side.I performed this by going to Setup --> Forwarding, then setup Port Range Forwarding & Port Triggering.

I also changed Setup --> UPnP, then UPnP Function is set to Yes.
 
My issue is that we would also like to forward 11101 through 11164 in the same maner.  However, when I step through the same method described above, it does not seem to work.So now I am confused how I could open the 8001 & 8081 ports, but not the higher 11101 thru 11164 ports.

View 3 Replies View Related

Routers / Switches :: Linksys E3000 Router Will Not Forward Port 443

Dec 20, 2011

I attached an Iomego Home Media network hard drive to my Linksys E3000 router (via ethernet cable). Before setting up the remote access on the Iomega, I forwarded the ports that it wanted (443 and 21) to the static IP of the Iomega. I checked to see that they were open using yougetsignal.com and they were both open. After setting up the remote access on the Iomega, the 443 port closed and I cant even get into the "manage storage device" page for the Iomega. Iomega uses TZo for the domain names. They tell me that the association is made between the name and my public IP address. My router is out of warranty since Sept, so Linksys wont give me the time of day. I contacted my ISP and while they block a couple of ports, 443 is not one of them.I've installed the latest firmware (1.0.04 - Build 6). Reset and rebooted numerous times, Port 443 remains closed.

View 8 Replies View Related

Port Forward Through 2 Routers - Linksys E1000 / Westell 7500

Feb 20, 2012

I have a westell 7500 with fairpoint service hooked up to my DSL line. I have disabled woreless on the westell. I then have a linksys e-1000 connected to the westell 7500. I have one wired computer on that network, my imac/game server, my main PC, my wii and an ipod touch connected connected to the linksys e-1000 wirelessly. I want to forward port 25565 through these routers to my imac. How can I do this? I have tried portforward.com, and a million other things.

View 2 Replies View Related

Cisco Routers :: RV120 VPN Firewall Unable To Forward Port 1723

Jul 25, 2011

I'm having a problem forwarding port 1723.  What i'm trying to do is to use VPN to access my server pc and I don't want to use the VPN software that is in the router.  When I telnet the port it goes through but when i try to access it outside of the office I can't get through.  I've been using [URL] to check port 1723 and I get this:

Error: I could not see your service on XX.XX.XX.XX on port (1723)
Reason: Connection refused

View 4 Replies View Related

Routers / Switches :: Port Forward On A SAGEMCOM SE567 Router To Be Able To View DVR?

Jun 12, 2011

How do I port forward on a SAGEMCOM SE567 router to be able to view my DVR from a remote location?

View 3 Replies View Related

Belkin Routers :: No Support For F9J1005v1 - Port Forward / Firmware Update?

Dec 27, 2012

There is no support for Model F9J1005v1. How do I update its firmware and how do I port forward on the same

View 2 Replies View Related

Cisco Routers :: RV042 / Forward All Packets To Port 9000 From WAN To Single IP Address On Network?

Nov 2, 2011

I have a RV042 using (for now), just the single WAN interface. I am trying to forward all packets to port 9000 from the WAN to a single IP address on the network.  I've set up both forwarding rules under Setup -> Forwarding and under the Firewall -> Access Rules.I cannot connect to my device from the outside world, however.  Is there something I'm missing?

View 4 Replies View Related

Cisco Firewall :: How To Forward Hit Request On 5555 Port To 80 Port

Nov 7, 2011

I have one server 172.16.0.100 and i nat this server to a public ip X.X.X.5 and i open RDP for this public ip.Now when i access Remote desktop on this public ip x.x.x.5 it open perfectly.Now my senario is that i want to open a http url on port 5555,server ADMIN open port 80 for this URL on LOCAL lan(http://172.16.0.100:80)So how can i map port 5555 to port 80 on ASA 5520.so when i hit URL [URL]

View 5 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 - Forward External Wan Port Like 49150 To LAN IP On Port 22?

Nov 18, 2012

Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmwae Version : latest
ISP : telecom italia business on ipatm

How to Forward an external wan port like 49150 to lan ip on port 22?In the control pannel I can set only one port , and this port will be the same where the connection will be router to the lan ip ,therefore If I set the port 22 , the connection will be natted to the 22, but how to set a different external port to a specified different lan ip port?

View 1 Replies View Related

Linksys Wired Router :: RV042G / Create Service To Forward Public Port 9010 To Internal IP Address With Port 23?

Oct 12, 2012

Is it possible to create a service which will forward public port 9010 to an internal IP address with port 23?First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80?

View 1 Replies View Related

Connection Has Timed Out On Specific Website

Feb 6, 2013

I can't access the following a specific website from any computer in my house. I am able to access all other sites. I have tried Firefox, IE, Chrome. All i get is the following error: "The connection has timed out" I called my ISP this morning, and they asked me to try adding a proxy server in IE. That is, Internet Options > Connections > LAN settings > Proxy server > proxy.tpg.com.au:3128, After doing this i was able to access the site! What could this mean?

View 3 Replies View Related

Remote Desktop Connection Has Timed Out

Dec 18, 2011

I have a problem connecting to VPS with Windows XP Remote Desktop Connection.The error I'm getting is:"Remote Desktop Disconnected - The remote connection has timed out. Please try connecting to the remote computer again."I am not behind any network, firewall, router...I tried to turn off firewall and antivirus programs to see if they are blocking it. It didn't work.I could find from Microsoft support site refer to the server side configuration. But I know problem isn't with server, because I am able to connect from another PC (notebook running windows 7 with wireless connection). It is working straightforward with default settings.Are there any settings that need to be changed in Windows XP for RDC to work?

View 1 Replies View Related

Error - Internet Connection Timed Out

Feb 19, 2011

I am able to connect to firefox internet but when I try to log in to my Yahoo Messenger or iTunes store it tells me that my internet connection timed out. I try to connect to Internet Explorer and it will not connect to the web there. I have went into the tools box in Internet Explorer and clicked on internet option and than connection and I was going to try to change the proxy server LAN and when I would go into it to change that I would be able to find the address to put in but can not figure out what the port section is. I am using a wireless connection and it shows that i have connection even when I try the troubleshooting section that checks the connection and it tells me that there is no problem with it. I also tried restarting my wireless router and than restarting my computer which did not work.

Than I tried disconnecting and reconnecting to internet and still nothing. When I would login to my Yahoo Messenger and pushed the troubleshooter bottom it says, "We are not able to make a connection to the Internet. One of the following may be true: You're not connection to the Internet. Check cables, modems, routers, etc; Your Windows Internet options including the Windows Firewall settings are incorrect.; There is a problem with your Windows network settings, for example, the DNS settings in your Internet Protocol (IP) settings are incorrect or the DNS server is specified incorrectly or is not responding.; For more information, check the Windows online help and search for terms like "DNS" or "Firewall."

Checking virtual IP servers...
[VIP Raw] Resolving host name 944.452.2.1... [FAILED]
*** 'COMPONENT_TYPE_WININET' value: '12007' ***
[VIP Raw] Resolving host name 944.452.2.1... [FAILED]
*** 'COMPONENT_TYPE_WININET' value: '12007' ***

[code]....

View 4 Replies View Related

Cisco :: After Connecting VPN Giving Connection Timed Out Error?

Jul 24, 2011

I had been working on our client servers through Cisco VPN using internet datacard. But from past 3 weeks after logging into Cisco VPN using my username/password, when I try to connect to any of the servers, it is giving connection timed out error.

Whereas, my team members across other locations are able to connect to the servers using my VPN username/password.

I thought there might be some issue with my laptop or internet datacard. I got my laptop formatted, even tried out with fresh new laptops & new internet datacards, but the issue remains same.

I have tried using vpn_5.0.06.0160-k9 & vpnclient-5.0.05.0290-k9 to connect but issue did not get resolved.

View 4 Replies View Related

Servers :: Remote Desktop Connection Has Timed Out?

Dec 17, 2011

"Remote Desktop Disconnected - The remote connection has timed out. Please try connecting to the remote computer again."I am not behind any network, firewall, outer...I tried to turn off firewall and antivirus programs to see if they are blocking it. It didn't work. All I could find from Microsoft support site refer to the server side configuration. But I know problem isn't with server, because I am able to connect from another PC (notebook running windows 7 with wireless connection). It is working straightforward with default settings.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved