Cisco :: After Connecting VPN Giving Connection Timed Out Error?
Jul 24, 2011
I had been working on our client servers through Cisco VPN using internet datacard. But from past 3 weeks after logging into Cisco VPN using my username/password, when I try to connect to any of the servers, it is giving connection timed out error.
Whereas, my team members across other locations are able to connect to the servers using my VPN username/password.
I thought there might be some issue with my laptop or internet datacard. I got my laptop formatted, even tried out with fresh new laptops & new internet datacards, but the issue remains same.
I have tried using vpn_5.0.06.0160-k9 & vpnclient-5.0.05.0290-k9 to connect but issue did not get resolved.
I am able to connect to firefox internet but when I try to log in to my Yahoo Messenger or iTunes store it tells me that my internet connection timed out. I try to connect to Internet Explorer and it will not connect to the web there. I have went into the tools box in Internet Explorer and clicked on internet option and than connection and I was going to try to change the proxy server LAN and when I would go into it to change that I would be able to find the address to put in but can not figure out what the port section is. I am using a wireless connection and it shows that i have connection even when I try the troubleshooting section that checks the connection and it tells me that there is no problem with it. I also tried restarting my wireless router and than restarting my computer which did not work.
Than I tried disconnecting and reconnecting to internet and still nothing. When I would login to my Yahoo Messenger and pushed the troubleshooter bottom it says, "We are not able to make a connection to the Internet. One of the following may be true: You're not connection to the Internet. Check cables, modems, routers, etc; Your Windows Internet options including the Windows Firewall settings are incorrect.; There is a problem with your Windows network settings, for example, the DNS settings in your Internet Protocol (IP) settings are incorrect or the DNS server is specified incorrectly or is not responding.; For more information, check the Windows online help and search for terms like "DNS" or "Firewall."
Checking virtual IP servers... [VIP Raw] Resolving host name 944.452.2.1... [FAILED] *** 'COMPONENT_TYPE_WININET' value: '12007' *** [VIP Raw] Resolving host name 944.452.2.1... [FAILED] *** 'COMPONENT_TYPE_WININET' value: '12007' ***
I am currently on Time Warner Cable 10 mbps packge, and am using their wireless DOCIS3 modem/router. It is connected in my bedroom to the main computer. That computer stays connected. However, throughout the rest of the house (we have a two story townhome) it will drop completely or give limited connection...constantly. Sometimes I can have my laptop next to me and it will go out or give limited connection. The connection speed never drops, it just goes completely to no connection. Not for sure what is going on, if its on my end or time warner. Has been doing this for quite some time, the cable company comes out and changes the modem, but that's it, couple days later, goes back to doing it again.
I 've got some problem with my Mail Server since I've migrated to an ASA5510.Actually the server is in a DMZ with a private Ip ( 10.x.x.2) and it is translated to a Public IP ( 194.x.x.65).Some Users received in there mailbox a system administor error message :Object : Impossible to deliver : testYour message could not be deliver to one or more of its recipients: 421 SMTP connection went away!When they try to re sent it some times later, message is sent whithout problem.
I have 2 datacenters running same equipement (two Nexu 5596 with FEX).I just took a look at the log just to see if everything is ok and I saw that I have the same error message (a lot of times) at both location :
%SYSMGR-FEX100-5-HEARTBEAT_LOSS: Service "satctrl" heartbeat loss 2 ,max 7,I though it was a problem with my peerklink-keepalive connection but I see the word FEX ....so i'm not sure...
Note that at both locations, my Nexus are connected back to back through the management port using transceivers. So it's a copper cable from the first nexus, going into a transceiver, going to another transceiver in fiber and then back to copper to the other nexus.
I'm trying to open certain websites but the browser gives me this message: "Network Error (tcp_error) A communication error occurred: "Operation timed out" The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time.
Up to today I used Verizoon 4G to a Windows Visata box running Internet connection Sharing to get my home lab connected to the Internet . All was working well.
Today I had Hughesnet come and installl their service and I can no longer get access to the Internet from my PC netowrk. my VPN to my office for my IP phone coomes up an works just fine. At the router I do have Internet access which then leads me to believe that my problem is NAT related.
My router is a 2851.
When I enter PING 220.127.116.11 I get !!!!! but when i enter PING 18.104.22.168 SOURCE 192.168.69.3 I get .....
I recently posted this same issue the other day, using TFTPd32. Now i am pretty close to fixing it. I do have a different setup; my pc ethernet port is broken so I am using an ethernet/usb adapter. I am attempting to backup my IOS from a 3550 switch to my PC.
i m trying to connect two routers a Cisco DPC3825 (r1) and DIR-655 (r2) and at the end getting the error. i have disabled the SPI firewall on r1 and connected an ethernet cable lan to lan between the two. i don't want to confuse with whatever the mess i have done previously,Tell step by step what i should do to connect these two routers.PS: in addition, the gateway ip of r1 is 192.168.0.1 with subnet mask of 255.255.254.0 and the gateway ip of r2 is 192.168.0.2 with subnet mask of 255.255.255.0. r1 has a ip range of 192.168.0.10 to 192.168.0.128 while r2 has range of 192.168.0.100 to 192.168.0.199.
After a successfull installation of NCS 1.2 into a vmware environment and run the setup I have the following error while trying to start or to have a status for NCS (ncs start ot ncs status):sh: /opt/CSCOlumos/bin/wcsadmin.sh No such file or directory
I have a WiFi printer connected to an CWAPP Cisco AP AP1250. I am using WPA2-PSK to connect to this AP. I find that the printer connects to the AP at times and at times it does not. I got an error message from the Capture an error on the backend controller of the network."Authentication Request received invalid RSN IE Mismatch WP2 algorithm"
The problem is that one of the clients loses the connection to the network time to time ,The error in the WLC logg is
*Dot1x_NW_MsgTask_0: Jul 06 17:42:38.934: %DOT1X-3-INVALID_WPA_KEY_MSG_STATE: 1x_eapkey.c:843 Received EAPOL-key M2 msg has invalid information when mobile is in START state - invalid secure bit; KeyLen 24, Key type 1, client 00:21:6a:af:be:70
i got an error while connecting to my PIX (515e) via ssh connection there is an error message appears (The server has disconnected with error, server message reads: Internal Error) and at the console session at the time time, the following message appears also (process_create: out of memory)
I have an 1841 that was working fine - I could SSH to it with my Radius login and console into it with local credentials ("Fred").I added another use ("Mike") with priv 15 so the end user could log in locally via console if needed.After that, we can both log in via console, but when we try to enter privileged mode we get "% Error in Authentication", before even entering the password.I can still log in via Radius SSH with no problems and access privilege mode via SSH.What am I missing so we can have two different users be able to log in locally with different credentials and access privileged mode, and keep my ssh radius working?
We're seeing "OutDiscard" error on a LAN switch connected to newly migrated Cisco IP phones. All the other error counters are clean except for the OutDiscard. (please see attached "show int count err" output.) [URL].
According to the link above, the common cause of such discards can be to free up buffer space.(Am I seeing a switch buffer issue?) How to identify/resolve the cause of the OutDiscard.The switch is 3750-E running c3750e-universalk9-mz.122-44.SE6.bin
I was using my internet on my Acer Windows 7 operating system wireless just fine on Monday. I tried to use it on Tuesday and could not connect to the internet wireless any longer. I get an error message next to my network stating ""The settings [COLOR=green ! important][COLOR=green ! important]saved[/COLOR][/COLOR] on this computer do not match the requirements of the network"I have never encotured this kind of problem before. I proceeded to call Comcast who did all kinds of trivial beginner troubleshooting such as restart the router, restart the modem turn on and off the computer.
Just bought first wireless router, when i insert CD and start setup, after a few seconds i get Error 301: internal error. i have rebooted and still no luck. I've tried going to 192.168.1.1, i got in one time but didn't understand half the stuff. now i can't go back into that page.
My Linksys WRT120N router was working fine for all of 1 and 1/2 months and suddenly it stopped making the internet connection. At first nothing could access the internet but now that I've reset the router (via the little reset button in the back) my Kindle can access the wireless, but of course no password etc. I actually don't know how to put back the username and password for it. When router is connected: When I troubleshoot the connection by clicking on "Repair Connection" it takes about 2-5 mins "obtaining a new network address" then I get an error saying "The wired connection to your router was not automatically repaired. X Local network: Not connected.
We find ourselves in a difficult situation with the Cisco VPN Client version 5.0.07.0290 where it keeps giving us an
"Error 42: Unable to create certificate enrollment request"
When we attempt to use the Online enrollment method to create and enroll a new certificate. There is no additional information in the VPN client logs where we have set 3-High for all logs. In addition, Wire shark does not show any packets sent from the machine running the client to the Cisco 3825 router which runs the Cisco CA.
To create and enroll a certificate we do the following:
1. Click on the Enroll button to show the Certificate Enrollment dialog 2. Select Online 3. Select <New> for Certificate Authority 4. Enter http://192.168.120.1 as CA URL (note, 192.168.120.1 is the IP of the Cisco 3825) 5. Click Next to display the dialog where we can enter certificate details 6. Enter details in all fields except IP Address and Domain 7. Click Enroll which shows a dialog with the Error 42 ... message in it.
If we attempt to create a request by using the File method, all works fine, that is, the client creates a file with the enrollment request. The fact that the client does not send any messages to the Cisco CA leads us to believe that we have a problem on the client machine. However, the client does not write any information in the logs, so it is a bit hard to fix the problem. I can provide additional configuration information if required for both the client and the Cisco CA. Note that we have not modified any client configuration. Basically, we installed the client on a Windows 7 64bit machine and attempted the steps listed above.
Trying to connect two systems together but was giving error that contact network administrator,one system is laptop with wireless and other is desktop but connect through cable but running windows XPSamson
I bought belkin N150 recently. I tried to configure with my ISP. They are surprised how I don't have DHCP option in the wifi configuration and asked me to upgrade my firmware. When I tried to upgrade. I downloaded the firmware from [URL] tried to upgrade. It is showing file format error.
I can't access the following a specific website from any computer in my house. I am able to access all other sites. I have tried Firefox, IE, Chrome. All i get is the following error: "The connection has timed out" I called my ISP this morning, and they asked me to try adding a proxy server in IE. That is, Internet Options > Connections > LAN settings > Proxy server > proxy.tpg.com.au:3128, After doing this i was able to access the site! What could this mean?
I have a problem connecting to VPS with Windows XP Remote Desktop Connection.The error I'm getting is:"Remote Desktop Disconnected - The remote connection has timed out. Please try connecting to the remote computer again."I am not behind any network, firewall, router...I tried to turn off firewall and antivirus programs to see if they are blocking it. It didn't work.I could find from Microsoft support site refer to the server side configuration. But I know problem isn't with server, because I am able to connect from another PC (notebook running windows 7 with wireless connection). It is working straightforward with default settings.Are there any settings that need to be changed in Windows XP for RDC to work?
"Remote Desktop Disconnected - The remote connection has timed out. Please try connecting to the remote computer again."I am not behind any network, firewall, outer...I tried to turn off firewall and antivirus programs to see if they are blocking it. It didn't work. All I could find from Microsoft support site refer to the server side configuration. But I know problem isn't with server, because I am able to connect from another PC (notebook running windows 7 with wireless connection). It is working straightforward with default settings.
For the last two weeks or so I keep getting kicked out of websites I have went to on more than one occasion. IE just says cannot display webpage and firefox keeps saying connection timed out. I have been researching this issue through other forms. Here is what I have tried so far to fix this issueReset all cookies, history, etc Renewd IP System Restore I am not running off any proxys Did a full compuer scan and removed all threats/virus' Reset SSL's Uninstalled Windows IE and Firefox and reinstalled Unplugged Router Put cookies/firewall settings to minimun or none and tried to access websitesThere is no specific trend towards the webstites I go to, that I can see at least. One is my bank account and another is a clothing store, little things like that here and there. I can't get on any mozilla websites for tech so I have been googling it through my Android. I even did a diagnostic through windows on a specific website and it said that everything checked out and that it was a web site issue, which I find hard to believe since I can access it through my phone
I have tried Intel tools and latest drivers ( w/ and w/o pro wireless utility) but cannot pass thru code 10 error. Tried uninstall and install....as earlier card 4965 agn worked fine but seems like some conflict is stopping successful 5300 agn driver install.
Until now i used a D-Link router with a DDNS account on dyndns.com. I used the ddns account for accesing the surveillance camera when i wasen't at home. The ports for the cameras are 80 and 83.I have a static ip and when i tiped the IP on broswer i was able to acces the camera with port 80 and when i tiped ip:83 i was able to acces the camera with port 83.Today i got a RV180W router made de configuration (ddns, port forwarding) but now when i type the ip address i can't see the camera, instead the router interface is loading and when i tipe ip:83 i get the message "The connection has timed out".I've tryed diferent things but i can acces the camera only by internal ip (192.168.1.x) but using the DDns address i can't acces the camera.
We have a site running 2 1131AG access points on different floors with the same SSID.There have been issues with connections dropping over the last 2-3 months to some newer laptops and iphones that have been introduced to the network. It is almost totally intermittent and after updating the IOS and laptop drivers where possible, there is a still a problem that wont go away.I have some example logging from both AP's when this happens (apologies for the date/time differences, however the events are all sequential)
I have recently bought a new XPS 15Z Currently when I surf the internet I am unable to use the browsers ( IE9 or firefox ). I am able to use non-broswer related internet applications like STEAM, MSN or QQ with no issues in terms of speed or stability. But when I use my browsers to surf, I can have periodic moments when I cannot surf the internet, such as IE9 which says that I cannot connect to the internet due to some unknown error. But when I run diagnostics, it says that I do not have any errors. My adapter for my wired is the Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20). I have already contacted my ISP provider who have worked for with all the troubleshooting methods they can over the phone, and I trust that they are doing their best. But now it seems to me that the problem lies in my computer hardware or software and not in my router.
I just upgraded to the e4200 v2 and I seem to be having connection issues with my android phone and tablet. Both are 802.11n compatable but they seem to have issues staying connected. Just so everyone is up to speed, there are two connections made by android, a general one to the internet, and a second one to the google servers (for syncing e-mail and contacts and the like) When just connected to the internet, the wireless icons are gray, when connected to the google servers as well, the icons turn blue. It's the drop in connection to the google servers that I'm having an issue with. I currently have the router set in full auto for channel and frequency band, but I've also tried setting specific ones thinking maybe the change in channel or something was causing the disconnect. The disconnect will even happen when I'm sitting right next to the router. The phone is a Samsung Galaxy Nexus (Verizon LTE) running Android 4.0.3 and a Asus Transformer tablet (Wifi only) running android 3.2.1.
I have an 5510 ASA with 804 IOS. In that installed anyconnect (anyconnect-win-2.0.0343-k9.pkg) version. But when i am going to connect it from https:// I am getting the below error. So as a work around i tried to install anyconnect-win-2.5.6005-pre-deploy-k9.msi at my laptop and try to connect from https:// i am able to connect.