Port Forward Sagemcon SE-567 And Frontier ISP?
Aug 17, 2011I'm trying to set up a security system.How can I port forward an Sagemcon SE-567,and Frontier ISP?
View 1 Replies
ADVERTISEMENT
TP-Link ADSL2+ Wireless :: TD-W8968 - Forward External Wan Port Like 49150 To LAN IP On Port 22?
Nov 18, 2012Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmwae Version : latest
ISP : telecom italia business on ipatm
How to Forward an external wan port like 49150 to lan ip on port 22?In the control pannel I can set only one port , and this port will be the same where the connection will be router to the lan ip ,therefore If I set the port 22 , the connection will be natted to the 22, but how to set a different external port to a specified different lan ip port?
Cisco Firewall :: How To Forward Hit Request On 5555 Port To 80 Port
Nov 7, 2011I have one server 172.16.0.100 and i nat this server to a public ip X.X.X.5 and i open RDP for this public ip.Now when i access Remote desktop on this public ip x.x.x.5 it open perfectly.Now my senario is that i want to open a http url on port 5555,server ADMIN open port 80 for this URL on LOCAL lan(http://172.16.0.100:80)So how can i map port 5555 to port 80 on ASA 5520.so when i hit URL [URL]
View 5 Replies View RelatedLinksys Wired Router :: RV042G / Create Service To Forward Public Port 9010 To Internal IP Address With Port 23?
Oct 12, 2012Is it possible to create a service which will forward public port 9010 to an internal IP address with port 23?First of all, I do not like to open the public Telnet port to the inside so I would use another public port and second my ISP does not allow some public ports beneath port 80?
View 1 Replies View RelatedCannot Port Forward Or Open Port For Utorrent
Sep 18, 2012I have only recently noticed a HUGE decrease in my Utorrent speeds, so i thought i would have a gander and lo and behold.apparently the port Utorrent uses wasn't open. Now, i have tried about 10 different port numbers, made sure Utorrent is being accepted by Norton 360 Firewall,followed complicated directions to (i think) foward ports, and also follow directions to open a specific port.Nothing has worked so far, Utorrent still comes back with a port closed error.
View 1 Replies View RelatedHow To Forward Port 21
Jan 2, 2011I have just purchased a nas drive. I want to be able to access my files from anywhere. I believe if i setup FTP i can view the files over the web. from what i have been told i need to forward port 21 to the ip address of the nas drive.
View 6 Replies View RelatedD-Link DIR-655 :: Can't Port Forward Or Use DMZ
Jan 10, 2011I can't get any type of port forwarding or DMZ to work with this router. I've checked for double NAT, have a static router IP etc.
I'm using Vista, but I've tried it on a computer with XP as well. I'm using the standard windows firewall, but I also tried disabling it.
I'm using the original 1.10 firmware, I don't know if this is a known issue that was fixed or not.
D-Link DIR-655 Can't Port Forward Or Use DMZ
Jan 9, 2011I can't get any type of port forwarding or DMZ to work with this router.
I made sure to check everything in the sticky before I posted and it all checks out.
I'm using Vista, but I've tried it on a computer with XP as well. I'm using the standard windows firewall, but I also tried disabling it.
I'm using the original 1.10 firmware, I don't know if this is a known issue that was fixed or not.
Cisco WAN :: Port Forward To With 837
Jul 11, 2011My cisco 837 is connected to a ADSL Router by Ethernet Cable. I have forwarded the telnet port from my ADSL Router to the LAN IP of the Cisco Router so that i can connect to it Remotely but it is not working. I am able to telnet internally but from Internet it is not working. I am not using Cisco Router for ADSL Connectivity.
View 5 Replies View RelatedNetworking :: Port Forward On 443 And SSL
Sep 25, 2011On our LAN we have a SBS server and Level Platforms server and soon to be another Ticket Server all hosting an app runnin on 443. OWA, Service Center and Spiceworks Help Desk.
Each has it's own URL:
Remote.domain.com/owa
Sc.domain.com/owa
Support.domain.com
How can I forward Https to these servers? The one company said some Can port forward by URL another guy said you can forward to your internal dns
Port Forward Netgear WNDR3700
Jan 21, 2012I am trying to forward the ports for several ip network cams, that have built in webservers, on this router. I have done this before on my old Linksys router with no problems but the Netgear has me stumped.The only way I can reach any of these devices from the Internet is to map them to port 80. But that limits me to one device, hence the need to forward more ports.All cams have fixed ip addresses so it is not an issue of their ip addresses changing.
View 19 Replies View RelatedThompson TG585v7 Won't Port Forward?
Nov 14, 2011I have a Thompson TG585v7 router and i have been trying to port forward ports 36666 for my home CCTV system. I created an new application (which i called cctv) which was fine...it was when i tried to assign the new application to the LAN devise iv been having problems.In the 'application' bar i see my application labelled cctv.....then in the device bar i select the 'user defined' option to manually input the devise IP and the router just refreshes and doesn't store the forward that i want
View 3 Replies View RelatedCan Switch Port Forward Without Router
Apr 23, 2012Can switch do a port forward without a router just plane switch to port forward to another network crossing the internet.
View 1 Replies View RelatedPort Forward A Minecraft Server?
Sep 6, 2011Im trying to port forward a minecraft server. To do this i have to goto to the default Gateway which is 192.168.1.1. i come to an authentication screen that says:The server 192.168.1.1:80 requires a username and password.The server says: NETGEAR WNR2000v2.
NETGEAR WNR2000v2 is the name of my wireless router.Everywhere i go it says the username and password is:
admin, admin
admin, password
admin, 1234
admin, (none)
password, password
password, 1234
password, admin
password, (none)
None of these work i even tried typing the name name and password of my router. No luck?
Cannot Port Forward With Westell A90 7500
Feb 1, 2011I have been running routers and port forwarding for like the last 8 years and I am absolutely stumped why this router will not do it.I have a host/remote app where the remote accesses the host on port 7777 but it will not work even after adding that in the router admin.I also set the firewall to allow everything to make sure it is not part of the problem.
View 13 Replies View RelatedPort 80 Forward Works On One Computer But Not Another?
Mar 28, 2011I port forwarded port 80 for wamp. It works on my old **** pc, but not my laptop. They are both connected via ethernet right now, and it doesnt work.
View 1 Replies View RelatedPort Forward On A Zoom Router?
Aug 22, 2011[URL]I want to port forward so my family (not in my home) can play Minecraft on my server. What values should I type?
View 1 Replies View RelatedNetgear WNR2000v3 Port Forward?
Feb 24, 2012When ever I try to port foward It always says the ip adress should be in the same subnet as the lan ip adress when i'm using my public ip adress then I changed my ip adress to the public ip and it worked but no one can't get in the server.
View 1 Replies View RelatedD-Link DIR-655 :: Cannot Forward Port 3390
Aug 20, 2011-hardware: A4
-firmware: 1.34NA, 2010/04/16
-Cable ISP service
-Cable modem without built in router
-wired connection
-Qos is disabled
-I have tried port forwarding and virtual server
-3389 is forwarded fine
I cannot forward port 3390 anymore and I do not remember changing anything. I am trying to forward port 3390 b/c I already am using remoted desktop on another machine using port 3389 and it works fine. It is not the machine b/c I change port forwarding machine using 3389 and it works fine, but I need to have 3389 and 3390 set up.
Cisco WAN :: Port Forward Process For 851?
Jul 21, 2011I purchased a Cisco 851 Router for the reliablity, but the process to manage the router to port forward a IP address for a internet camera ... I'm lost. I will try the forums, versus paying a $400 dollar fee for support.
What is the process to have an internal IP address for my outdoor network camera visiable for WWW? How do I port forward 10.10.10.40 How do I assign a static IP to this outdoor network camera?
I can access the Cisco SDM Express V2.5
Cisco Firewall :: How To Do Port Forward On 871
Sep 20, 2011I always seem to have problems when trying to configure port forwarding on cisco routers. I've even tried the instructions I have for a cisco 1811, but no luck. I have a cisco 871 and a computer that has VNC installed on it. I want to be able to access that computer from out side the network using the external ip address and port 5950. People outside the network will be able to open vnc viewer and type in *external ip address*:5950 and it will be directed to the computer with a static internal ip address of 10.12.0.10. What commands do I use to do this?
View 4 Replies View RelatedCisco :: IOS 12.x+ Port Forward Only Established Connections?
Apr 3, 2013Using Cisco IOS 12.x+ on a router.How would create an ACL that will only allow access to a port from the inside only after it has been established. i.e. similar to port triggering? Inside host 10.1.1.60 needs to use port 61200 for bit torrent. Dont want the port to be visible as open to the global net accept when the host 10.1.1.60 establishes the connection first.That way a port doesnt have to be left open 24-7.
View 4 Replies View RelatedPort Forward Certain Ports For One Computer But Need UPnP For 2 Different Ps3
Dec 20, 2011Need to port forward certain ports for one computer but need UPnP for 2 different ps3's.These are the parts I have. I have read that the GT704WGB does not have a true bridge mode. I don't want to bias anyone however. How to best use this equipment so that I can port forward ports on my laptop. There are also several laptops, desktop and phones on my network but the 2 ps3's and my laptop are what primarily concern me.
-Actiontec GT704WGB for Verizon DSL (Modem / Router Combo)
-Actiontec Support GT704WGB Wireless DSL Gateway for Verizon High Speed Internet access
Cisco Linksys wrt54gs v4 (Router) currently running Tomato firmware but I can flash dd-wrt back to it in a second.
How To Port Forward Minecraft On Speedport W 502V
Apr 12, 2012I had a modem and I wanted to play minecraft without a hamachi so I decided to buy a router. I bought the router but I do not know how I can portforward the game.
View 2 Replies View RelatedCan't Port Forward Modem ZTE Zxv10 W300
Feb 10, 2013Can't port forward port 25565 for Minecraft server via Hamachi. I checked on Open Port Check Tool - Test Port Forwarding on Your Router and GRC*|*Port Authority, for Internet Port 80** both says theyre closed.
I dont know if I need to open firewall or any **** like that, because Im a beginner at networks, so.. That's how it looks like for now: Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
Can't Port Forward On Belkin F7d4302 Router
Feb 14, 2012I have a belkin f7d4302 v1 and I can't get it to forward my ports.
View 6 Replies View RelatedPort Forward Is Mixed Up After A Power Outage?
Aug 23, 2012So my den pc is 192.168.1.4 and the kids xbox is 192.168.1.6 well i set the port forwards for my ip address for my security cameras and I set the kids portforward for the xbox. Well after a power outage, the power comes back on and randomly assigns everything a new address. Well the portforward for the secuirty cam might be on the xbox, or the laptop or the guest pc or my den pc at random?
View 2 Replies View RelatedProtocols / Routing :: Unable To Forward Port
Feb 2, 2013So I need to forward certain ports to play/log-in game:
TCP: 80, 443, 2099, 5222, 5223, 8393-8400
UDP: 5000:5500
I did forward them in my router and checked them with PFPortChecker, every port seems to open except 2099, I don't understand why.Note that I disabled Windows Firewall, Router's Firewall, and I'm using Kaspersky Internet Security which I disable while checking ports/logging to game
Linksys Router Unable To Forward Port 80 / 443
Jan 19, 2013I have unchecked 'Block Anonymous Internet Requests” but then also I am not able to forward ports like 80 and port 443.
View 1 Replies View RelatedD-Link DIR-655 :: Can't Port Forward Or Use Virtual Servers At All
Mar 5, 2013I just bought this to replace a working Linksys but wanted gigabit so after reading a lot of reviews this is the one I picked up. So tell me what is the magic toggle to get port forwarding to work or virtual servers? I've configured them on Linksys, netgear, Cisco, etc 100 times with no problems. Nothing I configure on this confounded thing works. I've setup 6 port forwards, RDP, FTP, VNC and none of them work. Nothing. "Connection timed out" when trying to connect. This works on my other router just fine so its not my software, or my PC configuration as they have no changed. Ports are correct.
View 2 Replies View RelatedD-Link DIR-601 :: RDP Port Forward With Hardware Version
Mar 25, 2012DIR-601, Hardware Version : B1, Firmware Version : 2.00NA.Trying to open up port for RDP (3389) to WinXP machine (tried with DHCP and with static IP on XP workstation)Tried both Virtual Server (3389 to 3389 and other port numbers to 3389) and a simple Port Forwarding (3389 TCP). Both methods work correctly for about 15 or 20 minutes, then the router blocks traffic on the opened ports.If I delete the virtual server/port forward settings and recreate it will again work for about 15 or 20 minutes.Even tried creating my own schedule (although I would be quite happy with always)
Also can't find a link for the 2.00NA firmware to attemp a reflash, I have only be able to find firmware for the HWverA unit. (other than the wrt stuff, is there any other firmware for the B1 unit?
Belkin Routers :: F7D4302 - Can't Forward A Third Port
Mar 6, 2013I have two ports forwarded on my F7D4302 router, used for security cams, trying to add a third. The router does not open the third port. I've tried several different configuration without success. Since I've already been successful with the first two, I am puzzled.
View 2 Replies View RelatedLinksys Cable / DSL :: WAG120N How To Set Port Forward
Mar 2, 2011I Just bought this Linksys Modem/Router and i still can´t believe that my cheap dlink DIR600 or my OLD SAGEMCOM can set IP to all my machines but this WAG120N cant!and Worse, how will i set port forward if i don't know which IP the machine will get?is there any firmware or MAGIC ??
View 4 Replies View Related