Every time i boot up my laptop the little blue ring in the lower right corner just completely stops and it keeps me from opening anything and i have to wait at least 2 to 3 minutes to start up?
View 3 RepliesWhen I boot my system lately I have to fiddle with task manager to get things stable enough to connect to my network. This is getting very tiresome. I always find OdHost.exe taking almost all the CPU and have to kill it to get things running. This can't be normal and has not been until recently. I don't know of anything that has been installed in the last several months that is network related.
View 1 Replies View Relatedmy hp 5102 takes long to start.
View 1 Replies View RelatedMy wireless connection takes about 5 minutes to actually work once I reboot my windows computer. Once I start it, the wireless indicator in the bottom right corner of the screen shows that it is loading, but then freezes and doesn't let me use most applications on my computer. Then all of a sudden it will so a wireless signal and connection and everything works just fine. On the other hand, when I use the function key on my keyboard that turns off the wireless card before I restart my computer, the wireless stays off when I reboot. Then I turn it back on using the function keys and my wireless will connect automatically. Why is it that the wireless card/connection won't start up quickly if I just leave it on like people always do normally? Why is it that I have to toggle it on/off all the time for it to work connect quickly?
View 3 Replies View RelatedI have WAG-120N ADSL Modem+Router which I am using for the last two years. Recently It has started taking about 2-3 minutes to show any sign of life after it is powered on. When powered ON no light comes up until 2-3 minutes. Then Internet light goes red for about 2 seconds then power light goes on followed by all lights then it starts booting normally i.e. Power light stars blinking, WiFi light blinking, power light stabilizes, DSL light starts blinking, WiFi light stabilizes followed by DSL & Internet. When ON it works perfectly alright until switched off.
View 7 Replies View RelatedWhen I start-up my computer, it takes over an hour to find my router on my computer (Not on my brother's computer, or the computer upstairs). Once it does, it connect perfectly. This is very annoying because I do not have a lot of time anyway to work/play and when I do, it takes over an hour to find the router.Recently, I have been having HUGE lag spikes, constantly disconnecting from games and skype calls.
View 1 Replies View RelatedRegion : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : Others
Model : TL-MR3220
Hardware Version : V1
Firmware Version : latest
ISP : Orange
The TL-MR3220 takes a long time to identify the 3g modem and sometimes it will not identify it at all and says "unplugged". Sometimes "unplugged" suddenly apears after the modem has been identified and was working properly.Is this the normal behavior of this device ? Why ? What can be done ? I'm Using Alcatel X500D 3g modem.
We will be converting two 6500s to VSS. Each chassis has a Sup2T module, fwsm, 6908-10G blade, wism1 blades and two or three 6748-SFP blades. I was wondering how long the conversion process takes? If I remember correctly at the 2012 networkers lab it took maybe 10 minutes while using Sup720s. The instructor mentioned that with Sup2Ts it would convert a lot faster.
View 3 Replies View RelatedI have configured a portchannel with 3 ports - lacp active mode I want to pxe boot esx server with Hp Proliant DL 360 G7.
During Pxe Boot the physical Interfaces must be in (I) state - standalone.
The server receives via dhcp the ip but after getting the ip the link goes down for a short time and the switchport goes down and then in (w) state - waiting to be aggregated. Now the server tries to load via tftp the image but the server gets a timeout because the switchport is in state (w). It takes a long time til the switchport comes back in standalone mode (I).
Is it possible to modify the time how long the switchport is in the waiting to be aggregated state on 3750x ?
Would the right command be lacp rate-fast? But this command is not available on 3750x, only 6000 series.
I have a Cisco Aironet 1200 Series Access Point. It takes long time to boot up.
After showing the warning banner message it takes long time before asking for username.
The sh version is given below.
Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(7)JA4, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 1986-2006 by Cisco Systems, Inc.Compiled Tue 05-Sep-06 14:15
[Code].....
Problem: I bought my wife and I each a Gateway NV54 laptop this past year. While both of our laptops can acquire a network connection, she is able to browse the internet almost immediately, while my computer takes 30 seconds to a minute longer to connect to the same network, and then can take up to 3 minutes before any web browser recognizes the connection. This happens on every connection I make (school, work, home, etc.)Steps I have taken:
-Updated the driver for my wireless adaptor (Atheros AR5B93 Wireless Network Adapter), and nothing changed.
-Windows 7 service pack (6.1)
-Downloaded AVG, Spybot, Advanced System Care, and IObit Security and run scans in all 4 at least 3 times a week.
-Cleaned up hard drive files so that each of my two hard drives is less than 70% full.
-Removed superfluous internet connections and prioritized the important connections I use regularly.
I have a Dell E4300 with a 1510 wireless mini adapter running windows 7 pro with a netgear WNR3500 router running wireless N protocol. I have my laptop setup to sleep when lid is closed. When it awakens the wireless connection will not automatically reconnect and I have to manually select the SSID and connect. It will also reconnect if I use the network troubleshooter. The problem does not happen if I reboot the PC or start from a power off situation. I have the latest Dell driver and I am running the DWLAN utility.
View 3 Replies View RelatedI have a Dell Inspiron N5110, service tag
<ADMIN NOTE: Service tag removed as per privacy policy>
This never used to happen but has been occurring for about 5-6 months without an end in sight. The problem is that it takes ages to connect to a network and that networks are not joined automatically. Basically, whenever I open my laptop from sleep, I will see the little blue rotating symbol in the bottom right hand of the screen and it stays there for 2-3 minutes (usually) before it connects. Windows usually pops up an icon which says 'it is taking longer than usual to connect to the network' and it seems to often successfully connect when the connection attempt times out.
Steps I have taken to fix the issue:
- Update the network driver (it is up to date).- Never allow the system to turn off the wireless network adapter (via device manager).- Check that the network has 'join automatically' ticked in the settings.
I have a home (wireless) router. All computers have had good internet access for awhile. Yesterday, one particular laptop (Sony Vaio Z2) started intermittently having a poor connection. I've pinged the router (192.168.1.1) and it shows high packet loss and long round-trip times. Another laptop sitting right next to it (the one I'm on now) does just fine (no packet loss, round trips 1 ms or less).
What procedure can I go through on the Vaio, to figure out why its not working? Just before the trouble, I had updated the various drivers, but I really don't look forward to rolling them all back..
My Sony VAIO VPCEH36FX laptop has trouble staying connected to wireless for long. I've only had it for about a week now and it's been happening since Day 1. It alternates between trying to connect, to being connected but with limited access, to not being connected at all. However, if I unplug the router and plug it back in, the laptop will work fine anywhere from 30 minutes to a couple hours. But after that it goes back to trying to connect/limited access. I doubt it's a problem with the router, as all other devices in the house work fine with it. It's a Linksys Cisco router. It doesn't have a password or anything.
View 1 Replies View Relatedi have an acer laptop an iphone and an xbox360 running on my connection not always all at once but my connection just randomly cuts out at any point whenever im on xbox live i get disconnected and i look at the router and its just resetting itself and i have to go and reboot it or just reset it and wait a wile before it will come back on. but even when it is on its not for long before it goes off on its own
View 2 Replies View Relatedwe have several Dell machines using W7 and all of them are exhibiting the problem of not connecting to some wifi sources. The wifi appears to connect but no internet connection takes place.
View 1 Replies View RelatedPast couple of weeks trying to connect to some websites. It is only SOME, not all websites. It will either say that it is taking too long to connect or that the website is experiencing problems. I have no idea where to start as i am pretty clueless when it comes to configuring/repairing network related issues.
View 3 Replies View RelatedI have a WRK54G v2 connected to a Ubee cable modem, and when my computer, connected with wifi or ethernet, tries to play a Youtube video, the actual webpage loads fine but the spinning dots in the player remain for several minutes before the video starts to load. If the video has to buffer again in the middle of playback, it also takes several minutes to start again. When the computer is connected directly to the cable modem, everything works fine. Youtube is the only site I am having an issue with, other video streaming sites like Vimeo work fine.
View 9 Replies View RelatedI am looking for a really powerful long distance network adapter with high gain antennas
View 2 Replies View RelatedI want to create a link between two homes about 10/15 miles away from each other. I was thinking about using microwave technology to achieve this. I would like to be able to use this connection for linking two home networks/internet and possibly running iptv and voip over the link. I was hoping to operate in the unlicensed frequency.
View 2 Replies View RelatedI have an Inspiron 1521 and while I can find and connect to a network easily and quickly; it takes 5 minutes or so for it to really work. My icon says it's "identifying the network". Is there anything I can do to speed up this process?
View 1 Replies View RelatedWe have two dedicated racks for our DMZ. We need to connect them to a firewall. We do all the cabling inside the rack, so each of them must have a top of rack.Problem is, switch in rack 2 will be connected to rack 1 and then to firewall, so if switch 1 fail, we lose both of them.
I would love to stack them like 3750 but I don't think there is stack-wise cable long enough to connect two racks (and I suppose this length isn't supported by technology).We have only one port left in the FW.
I am installing my AE1000 in a new computer. During installation I enter my wireless network password which is on 5 characters long but the next tab does not light up to proceed to the next step. It only lights with 8 characters though my password is 5 characters long
View 2 Replies View RelatedThis past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies View RelatedI have a Toshiba laptop with Vista and an HP laptop with XP...neither of which will connect to multiple connections. There's a home connection and one thru a Verizon MiFi. I thought the latest AVG update caused it so I uninstalled on HP and no change. It's neither Chrome or FireFox connecting either.
View 12 Replies View RelatedI have recently created a wep key for my network, but when I try to connect my laptop to the network it says the settings saved on this compute for the network do not meet the requirements of the network?
View 2 Replies View RelatedI have access to a wireless network, but when I try to connect my laptop to the network it says that it can not connect. And, of course, you can't troubleshoot it without a connection...I don't know if I accidentally changed my settings somehow or what, but I'd like to get the problem solved.
View 5 Replies View RelatedMy laptop won't connect to my router however the wireless network connects to everything else in the house fine. It might work for a little bit ( sometimes an hour, sometimes only a few minutes) but then it will completely refuse to connect. The wireless LAN is enabled, it even shows full signal on the laptop it just will not connect. The LAN is enable but the button for it is blinking, I don't remember it blinking before. I'm not sure if that could be the problem. As its connecting it just says " waiting for the network" and that happens for about a minute then it just disappears.
View 2 Replies View RelatedI can connect without any problems on my desktop PC and my other laptop, but it's been nothing but trouble with this one. First I go and try to connect to the network: On the laptop that I have no problems with, this usually comes up: Instead, it goes straight to this, and it doesn't even let me try to type in the password: I'm very new to wireless networks, so I couldn't possibly know what's wrong. I've tried several things, but nothing has worked up to this point.
View 6 Replies View RelatedMy laptop will not connect to the wireless network it used to connect fine but a few months ago I stayed with my girlfriend for a while and could not get it to connect at her house, so, I phoned up the mobile techy bloke and he came round and changed the settings on the router to/from wpa or something like and also the settings on my laptop, problem is now I am back home it won't connect, it finds the network ok but when I try to connect it says it can't due to a timeout? its is running windows vista.I have managed to create this post via my phone as the laptop willnot connect in anyway
View 4 Replies View RelatedThis started this a.m. Every other computer can connect issue free. I have even removed all security and have it set as an "Open" network to see if this will resolve and still the Dell is unable to connect. If I click on connect, it attempts to then I get the Troubleshooter message. This PC is running Win 7. Let me know what further information is needed.
View 14 Replies View RelatedMy laptop won't connect to the wireless internet connection in my house, even though it will connect to any other wireless network and all other phones and computer seem to connect to this network fine. It just says the connection is local only. Every once in a while it will connect for a reason I don't know, but when I try it again the next day, it won't work. However, the laptop will connect with the ethernet cable.The wireless provider, TalkTalk, have said I might need to try installing or reconfiguring Wireless 0. I googled this and followed the instructions to set the WLAN autoconfig and wired autoconfig to automatic, but that hasn't fixed it
View 14 Replies View Related