Linksys Wireless Router :: Wrt310n Takes Very Long To Connect To Network?

Sep 28, 2012

When I boot my system lately I have to fiddle with task manager to get things stable enough to connect to my network. This is getting very tiresome. I always find OdHost.exe taking almost all the CPU and have to kill it to get things running. This can't be normal and has not been until recently. I don't know of anything that has been installed in the last several months that is network related.

View 1 Replies


ADVERTISEMENT

Laptop Takes Too Long To Connect To A Network?

Sep 19, 2012

Every time i boot up my laptop the little blue ring in the lower right corner just completely stops and it keeps me from opening anything and i have to wait at least 2 to 3 minutes to start up?

View 3 Replies View Related

Very Slow Wireless Internet - Takes Long Time To Find Router On Pc

Sep 25, 2012

When I start-up my computer, it takes over an hour to find my router on my computer (Not on my brother's computer, or the computer upstairs). Once it does, it connect perfectly. This is very annoying because I do not have a lot of time anyway to work/play and when I do, it takes over an hour to find the router.Recently, I have been having HUGE lag spikes, constantly disconnecting from games and skype calls.

View 1 Replies View Related

Linksys Cable / DSL :: WAG-120N Takes Long To Boot

Nov 7, 2012

I have WAG-120N ADSL Modem+Router which I am using for the last two years. Recently It has started taking about 2-3 minutes to show any sign of life after it is powered on. When powered ON no light comes up until 2-3 minutes. Then Internet light goes red for about 2 seconds then power light goes on followed by all lights then it starts booting normally i.e. Power light stars blinking, WiFi light blinking, power light stabilizes, DSL light starts blinking, WiFi light stabilizes followed by DSL & Internet. When ON it works perfectly alright until switched off.

View 7 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3220 Takes Long Time To Recognize 3G Modem?

Mar 14, 2013

Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : Others
Model : TL-MR3220
Hardware Version : V1
Firmware Version : latest
ISP : Orange

The TL-MR3220 takes a long time to identify the 3g modem and sometimes it will not identify it at all and says "unplugged". Sometimes "unplugged" suddenly apears after the modem has been identified and was working properly.Is this the normal behavior of this device ? Why ? What can be done ? I'm Using Alcatel X500D 3g modem.

View 5 Replies View Related

Wireless :: Card Takes Very Long To Start Up After Boot?

Sep 27, 2012

My wireless connection takes about 5 minutes to actually work once I reboot my windows computer. Once I start it, the wireless indicator in the bottom right corner of the screen shows that it is loading, but then freezes and doesn't let me use most applications on my computer. Then all of a sudden it will so a wireless signal and connection and everything works just fine. On the other hand, when I use the function key on my keyboard that turns off the wireless card before I restart my computer, the wireless stays off when I reboot. Then I turn it back on using the function keys and my wireless will connect automatically. Why is it that the wireless card/connection won't start up quickly if I just leave it on like people always do normally? Why is it that I have to toggle it on/off all the time for it to work connect quickly?

View 3 Replies View Related

Hp 5102 Takes Long To Start?

Aug 31, 2011

my hp 5102 takes long to start.

View 1 Replies View Related

Linksys Wireless Router :: WRK54G Takes Several Minutes To Connect To Youtube?

May 26, 2012

I have a WRK54G v2 connected to a Ubee cable modem, and when my computer, connected with wifi or ethernet, tries to play a Youtube video, the actual webpage loads fine but the spinning dots in the player remain for several minutes before the video starts to load. If the video has to buffer again in the middle of playback, it also takes several minutes to start again. When the computer is connected directly to the cable modem, everything works fine. Youtube is the only site I am having an issue with, other video streaming sites like Vimeo work fine.

View 9 Replies View Related

Linksys Wireless Router :: WRT310N Can't Connect To One Site Only

Dec 23, 2011

I can't open a connection to eca-msp.crashplan.com (which is one of the data servers for the CrashPlan backup service).Symptom: "telnet eca-msp.crashplan.com 443" hangs, and eventually times out.
 
Works fine when I connect directly to my cable modem.No PC or device behind my firewall can access it when going through firewall.Other crashplan hosts (notably, central.crashplan.com 443) work just fine.And of course, every other https site I use works just fine.
 
[code]....

View 1 Replies View Related

Linksys Wireless Router :: WRT310N Both Desktops Will Not Connect

Oct 29, 2009

I have a WRT310N wireless router (Ver 1). In the house we've got 1 macbook, 2 laptops running windows vista, and 2 desktops running windows XP.The original problem is that both desktops will not connect wirelessly. All 3 laptops connect but neither desktop wants to connect. Most of the time neither desktop will even recognize the wireless network. On one of the desktops we bought and installed a linksys wireless-n pci adapter. It was installed using the software that came with it and the drivers were updated. It still does not recognize the network or connect (obviously).
 
This has led me to try to upgrade the firmware on the router. The firmware version it is currently running is 1.0.4 (Jan 3, 2008) and I have been trying to upgrade to 1.0.7. I downloaded the firmware update from the linksys website. I accessed the router via my browser and went to the "Firmware Upgrade" section under Administration. However, the upgrade freezes at 98% every time I try.
 
I have tried to upgrade the firmware wireless, wired, and wired without internet connectivity and nothing works. Fortunately stopping the upgrade after the freeze at 98% has not had any negative affects on the router as it still works perfectly on the 3 laptops. I even re-downloaded the firmware .bin file before the last attempt and still nothing.The fact that neither desktop will connect wirelessly is baffling, but I don't know what to make of the fact that the firmware update freezes at 98%. I've looked for the intermediary firmware updates to see if I could step my way up to the latest update, but I haven't been able to find them.

View 4 Replies View Related

Cisco Switching/Routing :: 6500 How Long Conversion Process Takes Place

Dec 5, 2012

We will be converting two 6500s to VSS. Each chassis has a Sup2T module, fwsm, 6908-10G blade, wism1 blades and two or three 6748-SFP blades. I was wondering how long the conversion process takes?  If I remember correctly at the 2012 networkers lab it took maybe 10 minutes while using Sup720s.  The instructor mentioned that with Sup2Ts it would convert a lot faster.

View 3 Replies View Related

Cisco Switching/Routing :: 3750x Stack - LACP Waiting To Be Aggregated Takes Too Long

Oct 26, 2012

I have configured a portchannel with 3 ports - lacp active mode I want to pxe boot esx server with Hp Proliant DL 360 G7.
 
During Pxe Boot the physical Interfaces must be in (I) state - standalone.
 
The server receives via dhcp the ip but after getting the ip the link goes down for a short time and the switchport goes down and then in (w) state - waiting to be aggregated. Now the server tries to load via tftp the image but the server gets a timeout because the switchport is in state (w). It takes a long time til the switchport comes back in standalone mode (I).
 
Is it possible to modify the time how long the switchport is in the waiting to be aggregated state on 3750x ?
 
Would the right command be lacp rate-fast? But this command is not available on 3750x, only 6000 series.

View 0 Replies View Related

Cisco Switching/Routing :: Why Boot Up Takes Long Time - Aironet 1200 Series

Nov 24, 2011

I have a Cisco Aironet 1200 Series Access Point. It takes long time to boot up.
 
After showing the warning banner message it takes long time before asking for username.
 
The sh version is given below.
  
Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(7)JA4, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 1986-2006 by Cisco Systems, Inc.Compiled Tue 05-Sep-06 14:15

[Code].....

View 3 Replies View Related

Linksys Wireless Router :: Using WRT310N As Access Point To Extend Network

Sep 5, 2011

I currently have a Linksys WRT310N as my primary router/wireless device. I am not getting coverage in my entire home. I was considering purchasing the Linksys E4200 and using the WRT310N as an access point in another part of my house to extend my wireless network. From all of the research and reading I have been doing, it seems that I must connect the WRT310N to the E4200 if I want to use it as an access point. Is this the only way? I have no way to connect the WRT310N to the soon-to-be E4200 unless I run an Ethernet cable across the floor. My goal is to use the WRT310N as a wireless access point without having it wired to the E4200, if at all possible. If this is not, what other way could I go about doing this type of setup?

View 3 Replies View Related

Home Network :: WRT310N Linksys Router - Exceptionally High Pings

Jul 14, 2011

Using a WRT310N Linksys Router and just today at 2PM I received the largest and longest lag spike ever, it is still going on as I write this (10:00PM). I am receiving pings of 500+ ping and my download speed spikes like crazy. Here are my speedtest.net results.Here are my results from Netalyzr URL

View 4 Replies View Related

Dell :: Inspiron N5110 Takes Ages To Connect To Network

Oct 25, 2012

I have a Dell Inspiron N5110, service tag

<ADMIN NOTE: Service tag removed as per privacy policy>

This never used to happen but has been occurring for about 5-6 months without an end in sight. The problem is that it takes ages to connect to a network and that networks are not joined automatically. Basically, whenever I open my laptop from sleep, I will see the little blue rotating symbol in the bottom right hand of the screen and it stays there for 2-3 minutes (usually) before it connects. Windows usually pops up an icon which says 'it is taking longer than usual to connect to the network' and it seems to often successfully connect when the connection attempt times out.

Steps I have taken to fix the issue:

- Update the network driver (it is up to date).- Never allow the system to turn off the wireless network adapter (via  device manager).- Check that the network has 'join automatically' ticked in the settings. 

View 1 Replies View Related

Linksys Wireless Adapters :: AE1000 - Network Login Password 5 Characters Long?

Jun 30, 2012

I am installing my AE1000 in a new computer.  During installation I enter my wireless network password which is on 5 characters long but the next tab does not light up to proceed to the next step.  It only lights with 8 characters though my password is 5 characters long

View 2 Replies View Related

Linksys Wireless Router :: E4500 Reboot Takes Half Hour

Dec 31, 2012

Not sure if I have a defective router, but if I unplug it I then need to wait at least a half hour to plug it back in. Anytime sooner and it won't broadcast a SSID or connect to the modem. This is a huge inconvenience if you want to change router settings and then you need to restart.

View 1 Replies View Related

Linksys Wireless Router :: How To Configure WRT310N

Dec 6, 2012

How to connect my att dsl westell moden to my Linksys router.  I am changing service providers from comcast to att.  My router was working with my cable model but I'm unable to configure it to communicate with the dsl modem. 

View 9 Replies View Related

Wireless-N Gigabit Router (WRT310N) / Cannot Complete The Network Setup Wizard

Oct 2, 2011

I have two PCs connected to each other through a Wireless-N Gigabit Router (WRT310N). One PC is running Windws XP while the other is running Windows 7. At this point I do not have, or want, Internet connectivity. I would, however, like to call web pages on the Windows 7 PC from the Windows XP PC. The Windows 7 PC has php files that run C++ files to analyze files supplied by the Windows XP PC and I would like to send the results of the analysis back to the XP PC.The reason for this is that I am setting up a home based web site that allows users to run programs on my Windows 7 PC but I want to keep hackers from accessing files on my Windows 7 PC. So the XP will be connected directly to the Internet and the Windows 7 PC will only be connected to the XP PC.I can successfully ping both ways between the Windows 7 PC and XP PC. So I fire up FireFox (FF) on the XP PC and type the following in the FF URL box.

[code]....

The same happens when I replace the Windows 7 PC IP address with the Windows 7 PC name.I tried to set up a network between the two PCs with the MS network wizard on the XP box. It made a setup disk with a single file on it. I was supposed to run the setup file on the other PCs that are supposed to be on the network but, whe I did, I got the following message.Cannot complete the Network Setup Wizard,An error occurred during the configuration of the network on this computer.You can configure the network manually.

View 3 Replies View Related

Linksys Wireless Router :: WRT310N - Color Of Internet LED?

Feb 5, 2012

I am getting 22-30mbs down through my router wired and I'm only getting about half of that through wireless.  Is this normal?  I also have a question about the color of the internet led.  The online manual says that it should be blue, but mine is green.  All of the other LEDs are blue except the internet one.  Not sure if that is an issue or not.

View 1 Replies View Related

Linksys Wireless Router :: WRT310N Does Not Retain Configuration?

Sep 17, 2012

our WRT310N router does not retain any configuration given to it. When we reset the device, it goes back to its factory settings. In that state we can access the device (http://192.168.1.1), make some changes and save it. The changes include giving it a different name from the default, and setting a password for the connection. However, when we try to use it for our wireless network, we cannot connect to the internet. Checking the Connection Status in a Windows XP  laptop, we found out that we have been given a gateway different from what we have set the device into and thus a different set of IP addresses for each of the device.
 
Also at this time, we cannot access the router anymore (via 192.168.1.1 or via the gateway provided) and thus having no choice but to reset the device again. We then reinput the configuration desired, save it, restart the systems (both PCs and router) but after a few moments (initially it retains the settings chosen) we won't be able to connect through the Internet and find out that the router has a different configuration again. We also tried letting the device "rest" but the same problem persists.

View 5 Replies View Related

Linksys Wireless Router :: Wrt310N V2 Blocks One Website

Aug 19, 2012

I have a Linksys WRT310N V2 wireless router.  Last week it started blocking access to our family website.  That website appears to be the only one that is blocked.  Every other website we have tried works just fine.  I have tried the following.Remove the WRT310N router and plug a computer directly into the broadband modem.  After this everything works fine for the one computer I have hooked into the internet.Remove the WRT310N router and substitute an old Linksys non-wireless router.  Everything works fine for the hardwired computers on the LAN.  Again, not really an option, need wireless access.
 
Unplug the router and so a soft reset.  Still blocks this one website.I have not done a hard reset to factory specs.  I wasn't looking forward to redoing everything I had set up.I looked over every setting in this router and can't find anything that would cause it to block a web page.  I am far from a networking expert, but most of the settings seem pretty obvious.

View 3 Replies View Related

Linksys Wireless Router :: WRT310N No Internet Connection

Oct 2, 2012

I have a WRT310N router and suddenly it stopped connecting to the Internet. I can't ping anything from the router page. I tried restarting it a few times, unplugged it, left it off for a few minutes, plugged it back in, upgraded the firmware, still not working. I tried another router and it works fine. When connected directly to the modem, it works fine, so the problem has to come from the router.
 
I can connect to the router through wired or wireless just fine, I just can't access the internet.

View 2 Replies View Related

Linksys Wireless Router :: Updated Firmware On WRT310N?

Mar 4, 2012

Which I have never done since my dad bought it a few years ago. Now when I try re-installing the Linksys software it gets stuck when trying to identify the network from the cable modem through the router. I've tried every reset feature there is & nothing has worked! I'm I going to need a new router?

View 9 Replies View Related

Linksys Wireless Router :: WRT310N V1 Cannot Get An IP From PPPoE Server

Nov 17, 2012

I have a Linksys WRT310N V1.I am trying to connect this via PPPoE to another Thompson router/modem that has been succesfully switched into BRIDGE mode.The Linksys router is conneted via ethernet cable to an ehternet port on the Thompson router.The ADSL cable is pluggedinto the WAN port of the  Thomson 'bridge'.There is no cable in the WAN port of the Linksys router.
 
The Linksys router is set up to connect over PPPoE using the username and password that was given to me by my ISPs tech support (checked and double checked).The DHCP server on the Bridged Thomson is set to ON. DNS is set to OFF.the DHCP server on the Linksys router is set to ON.

View 2 Replies View Related

Linksys Wireless Router :: Increase Range In WRT310N?

Aug 12, 2011

I've been using the WRT310N and noticed that the range is quite poor--I've noticed this in two different houses.I've tried using an old repeater but it is a G repeater so it seems to actually make things worse i.e. a remote device will work slightly better with an unrepeated N signal than a repeated G (router is a in mixed mode).

View 3 Replies View Related

Linksys Wireless Router :: Wrt310N - Trying To Forward A Port?

Nov 25, 2011

Having a devil of a time trying to forward a port on my router. Did everything instructions said, but it still doesn't work. What can I do.

View 2 Replies View Related

Linksys Wireless Router :: Best Configuration Settings For WRT310N?

Nov 27, 2011

I'll be installing a cable modem in the next few days and would like to connect my WRT310N to it.  I was wondering what would be the best settings to use.
 
Main uses:

- Distance from WRT310N to other devices is around 8 meters, separated by 1 concrete wall

- Stream music/video from PC to iPad and another laptop wirelessly.

- Transfer files between devices

View 3 Replies View Related

Linksys Wireless Router :: How To Re-flash A Bricked WRT310N

Oct 27, 2010

I accidentally flashed my WRT310N version 1.0 with version 2.0 firmware. After which the router was dead as a doornail.After a frustrating 3 hours of reading forums, following over 11 tutorials, and being 1 second away from throwing my WRT310N at the wall, I finally fixed it.I performed this fix on a Windows 7 32-bit PC. My provider is Comcast.Make sure you only have one ethernet cable connected from your PC to the router. The cable should be connected to any one of the 4 blue ports. I connected mine to port 1. DO NOT CONNECT IT TO THE YELLOW INTERNET PORT on the router.
 
With the router in your hand, hold down the reset button for 30 seconds until the port 1 light goes out then immediately disconnect the power while still holding down the reset button. DO NOT LET GO OF THE RESET BUTTON!WAIT 30 more seconds with the power disconnected. (Do not let go of the reset button)PLUG the power back in and WAIT another 30 seconds. After that, let go of the reset button. You should have held the reset button for a total of 90 seconds. This will wipe the router's nvram.Bring up the command prompt window that you prepared earlier. You should still see the ping command that you entered in Step 2. Now, hit ENTER to start pinging the router continuously. You will probably see a bunch of "request timed out" responses.Bring up the TFT2.exe window that you prepared in step 2. Press UPGRADE so it can begin communicating with the router. Make sure you set at least 10 retries.
 
As quickly as possible, go back to your router and HOLD the reset button and disconnect the power. You don't need to wait 30 seconds...5 seconds is enough. While stil holding the reset button down, plug the power back into the router and keep an eye on the command prompt and TFT2.exe windows.If the command prompt has successfully pinged the router, TFT2.exe will begin to flash it and very soon it will show a success message below the progress bar. If you still can't successfully ping the router, close and restart TFT2.exe using the same settings and try disconnecting/reconnecting the router's power again as mentioned in the paragraph above. You may want to try holding  the reset button down longer than 5 seconds. I was able to get this to work on the FIRST TRY.Now that your router is has the proper firmware, go back to your adapter's settings (mentioned in step 4), delete the static IP and set it back to the default automatic settings.Plug your cables back in and don't forget to plug the ethernet cable from your modem to the yellow internet port on your WRT310N."Recycle" the power to your cable modem by holding down the reset for 60 seconds or disconnect it from the power outlet for 60 seconds.Reset your router by holding the reset button for 30 seconds.

View 7 Replies View Related

Linksys Wireless Router :: Can't Get WRT310N V2 Connected In Gigabit LAN

Apr 2, 2012

My HD Configuration is:
 
+ WRT310N v2 ,
+ Win7 x64,
+ Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20)
 
My connection is still 100.0 Mbps.

View 1 Replies View Related

Linksys Wireless Router :: WRT310N Version 1 And 2 Differences?

Jul 10, 2009

What is the difference between version 1 and version 2 of the 310N? I cannot find any information provided by Linksys or on this forum that describes what the difference is.

View 1 Replies View Related

Linksys Wireless Router :: WRT310N Emits No Signal At All?

Sep 26, 2012

I have a WRT310N router. I called the connection "Monica". Well... Monica doesn´t appear in my web and connection center. It simply doesn't exist any more, as if it was off, but it is on, all the lights are on. I checked de internet supply and it works. I don't know what to do..

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved