I am trying to do a PXE Boot with a M50 Precision Workstation. I have flashed my BIOS to A12. When I boot up, I get PC Boot Agent 4.31 and PXE 2.41. It starts to do the DHCP, however it errors out with the message:
PXE-E51: No DHCP or proxy DHCP offers were received.
break the password of DELL PRECISION 390.
View 7 Replies View Relatedi have a dell precision 360 and need to find a ethernet controller driver for it. I've searched high and low but can't seem to get my hands on it.
View 6 Replies View RelatedI have a Dell Precision 340 and I went to connect my modem and wireless router to the PC via my ethernet cable. When I hook it up, my computer says new hardware ethernet controller and wants me to add it. When I try to add it, it will not let me and wants me to add the hardware via a disk or CD rom, which I don't have. Because I can't get the ethernet cable to work on the PC I can't get internet, however the wireless router still works......
View 6 Replies View RelatedI have a Dell Precision T3400 computer running XP with Service Pack 3. It has a Dell 1505 wireless network card. I’m trying to connect to a network with WPA Personal security. When I go to Network Connections, it sees the network and recognizes that it’s using WPA, but I can’t connect to it. I enter the password and it tries to connect but doesn’t. I’m sure the password is right because other computers (Windows 7 and Mac) connect with no problem. I thought Service Pack 3 could handle WPA and WPA2.
View 1 Replies View RelatedI tried to connect inet with a DSL "Speed Modem 200" (no WLAN!, no router), RAS failure 651.
OS WIN7 Enterprise, SP 1, 64-Bit
It seems to be a driver problem of the LAN adapter, because under XP SP3 on the old PC ervery thing is fine.The driver test told me "newest version" what's to do?
On my desk in my basement I have two computers, one HP Pavilion running Windows 7, and a Dell Precision running Windows Vista. Now I was wondering if it is possible to share the internet received on the HP to the Dell by the ethernet connections?
View 1 Replies View RelatedI have a laptop here that I can't seem to turn wireless off on via the switch. While the obvious choice is hardware failure, it's nearly a brand new Dell Precision M6600 and I hesitate to jump to conclusions.
The physical switch on the system will not toggle wifi on or off; it is always on. I can disable it via Windows (Win 7 Pro), or simply disconnect from the network, but when I do it does not remember the wifi passwords, which may be a separate issue.
i have a Dell Precision T3500 tower running Windows 7 Ultimate. This was built and shipped in March 2011 equipped with a EMEA Dell Wireless 1520 PCIe card, which has a wireless antenna attached to the port. The PC is about 30ft from the wireless router, a BT Home hub.From outset I noticed that I was gettimng very slow connection speeds to the internet, but supposed this was because our broadband was using a standard BT line with copper cables, and we are some 3 miles from the BT exchange. I was getting speeds of around 300-500kb/s. BT have just finished installing BT Infinity in my area, offering 'up to 40mb/s' speeds. I upgraded on Friday of last week.
Here's the problem: we have three laptops in the house and they are now all getting between 15mb/s-20mb/s speeds, including my Dell Inspiron laptop which is using a Dell Wireless 1501 Mini Card to connect wirelessly. Sat next to this laptop is my Precision tower, with the wireless antenna. However, the PC is getting a speed of only 3mb/s.The modem and router are obviously working fine. Forget 40mb/s, I am quite happy with 15mb/s. But why is the PC wireless speed so poor?. For a brief five minutes or so on Friday the PC DID get 15mb/s but not since then. I cannot see any way to configure the wireless card to increase the speed.I tried disabling the Dell network adaptor, and installed and plugged in a Belkin USB wireless adaptor (on which my wife's PC had achieved 15mb/s) but this slowed the wireless even more - to around 100kb/s.
How to successfully get a Dell Wireless 1397 to work with Windows 2008 x64? I have a Precision M4500 that I managed to install Windows 2008 x64 R2 on. I installed the Windows 7 drivers for the card and the Device Manager says the device is working properly. But when I go to enable the device, it acts like it is enabling it, but the properties always say "disabled".
View 1 Replies View RelatedI have notice that my XPS 17 L702x takes more than usual to boot than before.
View 5 Replies View RelatedI recently installed a Dell 5324 switch as my main switch and it's my first time using a managed switch at home. One thing I've seen as an issue in a corporate environment, and now here, is that managed switches tend to take a bit longer for a port to be active. Ex: a PC is turned off, I turn it on but if the PC boots up very fast the port may not be ready. All mounts fail. This is the issue I am facing with my HTPC. It runs Linux and has a SSD, and it has no UEFI bios to slow it down (which is good, I hate UEFI for that) so it's up and running within 5-10 seconds of pushing the power button. The network mappings fail because the port is not ready by the time it gets to the script that mounts everything.
View 8 Replies View RelatedCan I use one 1 PC (Powerful PC) as a work station and can I use for to create different nodes.(Clients) Ex. By adding 5 Monitors to that PC, can it be treated as server/workstation ?So each monitor will be treated as single PC ?
View 1 Replies View RelatedOk so I am working on this networking project for cleaning up our Internal DNS. So we are running untangle that uses DHCP. I am currently going though and 'Reserving' the IP addresses for each work station. This way we can connect to workstations and install software remotely. Problem is our Host (A) records are so messed up and PTR records point to multiple users/pcs. I am aware of scavenging, but we have that set to 14 days per our network admin, but during this time the DNS gets messed up because we have 30 people in our office running MAC's with VM bootcamp and they also use VPN connections. So for instance I use Mac with parallels 7. I used both wired and wireless connections to the internet. This creates 2 IP addresses that needs to be reserved and 1 bridged connection for my VM. So Technically I would have 3 host A records and 3 PTR records? But what about the VPN connection? Sometimes when other ping my work station (ex. ping link2057macbook) it returns an IP address that I used for my VPN and not the correct IP.
View 3 Replies View Relatedwhat is terminal and workstation in networking? I assume they mean client computers.
View 2 Replies View RelatedI am setting up the network for the computer institue I work for. We are discarding the old network and are going for a new network. There will be 2 Computer Labs with 60 computers in each Lab. The staffroom will have 20 computers. The Accounts department will have 5 computers. All the departments are in the same building with just 2 floors. It will be a wired network. All computers should have access to the Internet. There will be a printer each in the 2 Labs, staffroom & accounts department which has to be shared with their respective network. The Lab computers will run MS Office, Adobe software etc. Likewise the the staffroom and accounts department computers will also have to run MS Office and probably Adobe software as well. We will be using Windows Server 2003 and are inclined to use IBM servers due to a partnership. Cost isn't a major issue and the management is willing to spend to set this up rightly in the first place.My main question is whether we should go for a thin client network with everything running in the main servers. In that case how many servers should we have and what would be the ideal config of those servers.If we go for workstation PCs for each user if cost isn't an issue then what are the benefits over thin client computersDo we have to have a separate server for data?
View 5 Replies View RelatedI cannot ping mydomain.local from any computer on my network. In order to this, I have to set DNS 1 as my server's ip address, then I can ping it. The reason this is a problem is because in order to add a workstation to my domain, I have to manually configure DNS to my server's ip. I have two networks, all new systems and this occurs on both. So obviously it is the way im setting things up[CODE]
View 13 Replies View RelatedI keep getting a 50% loss on one workstation. I tried switching out the network card and that seems to have resolved the issue... Do network cards exhibit strange behavior when they fail or am I overlooking a deeper issue?
View 1 Replies View Relateda workstation on our domain running windows 7 64 bit downloaded updates from microsoft. There was about a hundred of them. Since they installed the machine won't connect to the network shares. It can access the internet easily enough. The Workstation Service won't start. It comes up with an error 1068: The dependancy service or group failed to start. I used System restore to go back before the updates and everything worked again. Installed the updates and the problem re-appears. I have 2 wireless network adaptors so I disabled one.
View 2 Replies View RelatedI have a hardwired network with 10 workstations plugged into switch. Printer plugged into switch. Server plugged into switch.Switch plugged into router.Router DHCPs except printer is static IP. All have access to internet through server then out through router.Have added another workstation that is not allowed access to the network (on purpose) but needs to be able to use the printer. The workstation is not under our security for virus control, etc so I don't want it in the server. But it needs access to internet and access to printer. Should I create a separate subnet from the router and keep the workstation separate there? If so, then how can I keep the printer accessible to both subnets?
View 1 Replies View RelatedI have got 2 workstations: test-pc and laptop-pc. Both 2008 server Sp1 x64 Both are added to Domain - 2003 server x86.My problem is:I cannot access shared folders on laptop-pc From test-pc if I am not physically logged in onto both machines. When I logged in as an administrator on both - everything is fine, but if I will turn laptop-pc on and leave it on Windows logon screen (without login) I wont be able to access anything on it.Is there anything I should enable/disable on Domain Group Policy to fix it?
View 1 Replies View Relatedis it possible to install cisco acs 5.4 on vmware 8 workstation ?
View 1 Replies View Relatedi than when installed WMware Workstation my LAN connection have been hidden,when plug into cable TP CAT5 to Connector does not show in Network And Sharing center in Windows 7?
View 3 Replies View RelatedIf you have problems setting up a computer as a domain controller,what would be the best approach? Four DNS Zones you can configure? What policy would you use to record unsucessful logons to a workstation?
View 4 Replies View RelatedI have a Vista Workstation that out of the blue today stopped connecting to the internet after applying the windows updates. I have gone back and rolled them out but it still will not connect.It is hardwired (Ethernet) to a cisco e4200 router that gets its internet from a motorola surfboard cable modem. I tried it with a wireless connection and had the same issue.Other computers on the network work fine both connected with ethernet and wireless. It won't assign an IP even though dhcp is enabled on the router, so I assigned a static one and it sees the local network just fine, I'm copying files from it to my NAS server without a problem.
View 4 Replies View RelatedMy laptop lcd screen has died. No replacement part, 9 years old. I have attached a cat5 cable from my laptop to my router. how do I see the laptop hardrive on my work station.
View 1 Replies View RelatedI have an HP Workstation that I have been working at constantly to get up and running on the network, it had "OpenCloudSecurity" adaware on it I believe and I was able to get that off with a couple of my freeware tools. The problem I am having is simply it will not connect to the network and only shows. 0Sent 0 Recieved and doesn't pull and IP configuration. I skimmed around and found that sometimes adaware/spyware can play with the TCPIP Stack and that your best bet is to reset the TCPIP stack and WINSOCK ; I did TCPIP Reset and Winsock multiple times with multiple reboots . I know it isn't the ethernet card because I popped in a live Ubuntu CD and it connected just fine on the wired ethernet.
View 3 Replies View RelatedI just moved into my mother house until I find a new house and need to connect my computer. Se has a wireless router. I have a server that was previously connected to a router and a workstation was connected to the router as well. It was all previously connected to the Internet via cables. How can I connect wirelessly? I am assuming I need a adapter to connect to the Internet. Do I connect the adapter to the server or is there an adapter that connects to the router?
View 1 Replies View RelatedI have a single workstation on an AS400 domain server, which is administered by a contract company, that continues to freeze up and then is kicked out of the network. The strange thing is that the computer also gets kicked off the Internet at the same time. I had the employee work from her laptop using the WI-FI connection while I attempted to troubleshoot the problem, and the laptop had the same thing happen. The strange thing is that she is the only one this is happening to. I originally thought it was a bad ethernet cable or bad port on the switch, but after the laptop had the same thing happen I decided the problem was else where. The contract company says that the problem has to be on my end, but thing that there could be something in her settings causing the problem. I have pinged the server with no problem, run a trace route with no errors reported, and made sure that the computer is set to a static IP as well. I have checked to make sure there are no other PC's. I also connected the cable to a different port on the office switch, connected my laptop with no problem, and had another employee sign onto her PC with a different sign on with no problems.
View 1 Replies View RelatedI need to setup GRE Tunnel1 between Windows XP 10.0.0.1 and HQ Cisco router 10.0.0.2 on HQ Cisco side I have:
!
interface Tunnel0
ip address 10.0.0.2 255.255.255.252
tunnel source Ethernet0
tunnel destination 83.242.251.30
!
!
But how to configue another point on Windows XP 10.0.0.1 side?
is it possible to install cisco acs 5.4 on vmware 8 workstation ?
View 1 Replies View RelatedI want to test ncs 1.0 virtual appliance demo version with vm, as we are not having the hardware to install vmware Vsphere hypervisor we tried to mount in vmware workstation.Vmware workstation support to mount the virtual appliance with ovf or ova format,But it showing some eroor as attached screenshot.
Will NCS run with vmware workstation or player or how to test NCS ova format in lab environment.
A month ago my ISP was routing half my subnet (129-254) over DSL. I just moved and routing no longer works without NAT. The issue is probably with the new DSL 'modem,' a zhone 1611-A1, but I am not sure how it should be configured.The 1611 is connected to a WRT610N, which works in NAT mode with the following settings:[code] With the previous settings, networking doesn't work from a workstation, though I can traceroute from the 610. I would like all workstations on the "LAN" to have fully addressable internet addresses like the previous configuration.There is an admin interface on the 1611, but the cursory settings I've tried don't work and I'm not a routing expert. The ISP is kindly routing my network, but they don't provide much support.
View 11 Replies View Related