I cannot ping mydomain.local from any computer on my network. In order to this, I have to set DNS 1 as my server's ip address, then I can ping it. The reason this is a problem is because in order to add a workstation to my domain, I have to manually configure DNS to my server's ip. I have two networks, all new systems and this occurs on both. So obviously it is the way im setting things up[CODE]
View 13 Replies
Work station of domain network stopped accessing the server and internet. Assigned IP address, since DHCP would not hand out automatic IP address. Was working fine before today.
View 1 Replies View RelatedI have a computer connected to a domain trying to login and I got this error message "the trust relationship between this workstation and the primary domain failed"
Then I tried to login as local Administrator and after trying a few passswords get this error. Your account has been disabled.. please see your system administrator
i'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.
View 1 Replies View RelatedI have a ASA 5505. I want to be able to ping from my workstation to some address, lets say [URL]. My workstation is connected to Ethernet 0/2. I have tried playing around with the ACL but am not able to accomplish this.
Result of the command: "show running-config"
: Saved:ASA Version 8.2(1) !hostname ciscoasadomain-name home.7vnmotorsports.com
[Code]....
we have using 10 system with domain contorller connected to network once disconnect server i cant acces to local systen ( per to per )
View 1 Replies View RelatedI have the DIR-655 (H/w Ver B1, F/W Ver 2.05NA) set up as router on my network (TWC/RR - modem is Motorola SURFBoard 6121 - modem only, no router or other services provided). I have configured the router sufficiently to allow all computers on the local network to access the Internet, and have configured the DHCP server on the router to provide IP addresses to the local network. I have configured the router to provide the DNS addresses for my local DNS resolvers (so that I can provide DNS resolution for an "internal" domain). Configuration specifics available on request, but everything mentioned so far is working satisfactorily, at least so far.
So, my question: The "Local Domain Name" setting on the router, as indicated in the documentation, provides a connection-specific domain name when DHCP supplies an IP address to the local system. This setting, however, is overridden if the ISP provides a domain name when it assigns an IP to the WAN connection. I have verified by experiment that this is true (no matter what I put in the Local Domain Name field - whether a valid domain, or blank - the local machines receive the domain name supplied by the ISP.I wish to modify this behavior. I wish to have the router provide the domain name specified in the Local Domain Name field *regardless* of what the ISP provides.
My Belkin router has an option to set a local domain name, which, I suspect, allows me to address hosts within my own network using this domain. By default, this is set to be "Belkin". Is it possible to call hosts within my network like this, e.g. ping foobar.Belkin instead of ping 192.168.2.4? The thing is, my routers internal page shows all set host names (so dh client seems to work) and the router itself is reachable as router.Belkin, but no other hosts are. My problem here is that the router knows each hosts name, but the hosts don't know each others name. How can I fix that?
Note: Nmap showed that port udp/53 for DNS is open on my router, but I can't find any way to configure it on the Web-interface.
Add:// It's a "Belkin F7D3302 v1"
i need to know when a computer shutdown. Is a windows xp. Is in another domain. I cant use VPN.somebody knows a software that alert me (example: by email)?
View 2 Replies View RelatedI use TP link-150M wireless Lite N router .Model no :TL-WR740N.I use this route to connect WAN and the computer connect to the LAN port for the router.I use DHCP to allocate the IP address from router in below case.I can browse and ping url...But I cannot ping/browse url...[code]
View 4 Replies View RelatedServer name when checked by right clicking "My Computer" and selecting properties it was A.B.C but when i pinged from client system it showed system full name as a.x.y.z the IP address showed in ping was correct.so how can it be same computer name but different domains?i have problem with .net application connecting to Sql in server from client system.
View 1 Replies View RelatedI have a cisco router 2811 connected on other two routers but can't ping any of them from any of them too (frame-relay encap correct) DLCI mapping ok all ip configured only router 2 's line protocol is up the rest is down on others and seems LMI sent are not receive and do know how correct that
View 1 Replies View Relatedi have configured remote access vpn on my 2801 router's gio0/0 int ip x.x.x.1. i connected my laptop through vpn client from internet. i connected successfully and my vpn router gives me the assigned ip block y.y.y.1. from my laptop i can ping the other int gio/1 ip z.z.z.1 but i cant ping the ip z.z.z.2 of my core sw which is connected on router's int gi0/1.
View 14 Replies View RelatedI just installed a new ASA 5505 for an office with three internal subnets.* The three networks can each get online fine and ping eachother, but cannot browse to shares on the two internal networks other than their own.* How do I configure the ASA to allow all traffic between these three inside networks?
192.168.152.0
192.168.152.0
192.168.154.0
[code]....
I'm using 3 AP's 1140 with local authentication using local radius (flex connect mode).the radius server im using is MS 2008 R2.authentication is working great on all devices pc's&mobile.authentication method is PEAP wpa2 aes enterprise.after 3 or 4 hours devices loose connectivity to the web.the device seems to be still connected to the ap but there is no ping to host from local lan or any arp learnd on local router.only manual disconnect on device and reconnecting brings connectivity up again.in one case only reseting the AP's worked.
View 6 Replies View RelatedI am trying to connect my 2800 Series CIsco Office router with VPN client software from home. I can successfully authenticate and get the IP address from the pool configured but couldnt ping any LAN Ips including default gateway. I am pasting my router's configuration.
IP Address Of LAN: 192.168.22.x/ 24
IP Addresses handed out to Clients: 10.10.10.5- 10.10.10.20
aaa new-model
!
!
aaa authentication login default local
[code]....
I have noticed that my virtual-access interface comes up but the line protocol of virtual-interface remains down as follows:
Virtual-Template100 x.x.x.x YES TFTP up down
Also The client PC picks up a random gateway of 10.10.10.1 which I never configured anywhere on the server.
I have, what I believe to be, a simple issue - I must be missing something. Site to Site VPN with Cisco ASA's. VPN is up, and remote hosts can ping the inside int of ASA (10.51.253.209). There is a PC (10.51.253.210) plugged into e0/1.
I know the PC is configured correctly with Windows firewall tuned off. The PC cannot get to the ouside world, and the ASA cannot ping 10.51.253.210.
I have seen this before, and I deleted VLAN 1, recreated it, and I could ping the local host without issue. Basically, the VPN is up and running but PC 10.51.253.210 cannot get out
ASA Version 7.2(4)
!
hostname *****
domain-name *****
enable password N7FecZuSHJlVZC2P encrypted
[Code]...
Ive got my home lab setup with two 2610 routers hooked togeather with a DTE/DCE Crossover and I have OSPF configured on both routers. Each router has one 3550 switch connected to each FA0/0 inteface. The issue is that Everything can be pinged except my windows 7 PC connected to the R1 LAN. Everything else can be pinged from any other device. I checked the PC gateway configuration, disabled the firewall and checked my switch configuration! Is their something that I need to change in Windows?
Windows PC ------------ 3550 Switch-------------R1-----------------------------------R2---------------------3550 Switch----------------------Linux Box
Windows PC can't ping past the FA0/0 interface between the switch and R1
I wounder if there is any way to ping the local deviceses connected to a network hosted by a Cisco 1921 router? I wan't to be able to ping the device(computer name) but currently cant do that.
View 1 Replies View RelatedCan I use one 1 PC (Powerful PC) as a work station and can I use for to create different nodes.(Clients) Ex. By adding 5 Monitors to that PC, can it be treated as server/workstation ?So each monitor will be treated as single PC ?
View 1 Replies View RelatedOk so I am working on this networking project for cleaning up our Internal DNS. So we are running untangle that uses DHCP. I am currently going though and 'Reserving' the IP addresses for each work station. This way we can connect to workstations and install software remotely. Problem is our Host (A) records are so messed up and PTR records point to multiple users/pcs. I am aware of scavenging, but we have that set to 14 days per our network admin, but during this time the DNS gets messed up because we have 30 people in our office running MAC's with VM bootcamp and they also use VPN connections. So for instance I use Mac with parallels 7. I used both wired and wireless connections to the internet. This creates 2 IP addresses that needs to be reserved and 1 bridged connection for my VM. So Technically I would have 3 host A records and 3 PTR records? But what about the VPN connection? Sometimes when other ping my work station (ex. ping link2057macbook) it returns an IP address that I used for my VPN and not the correct IP.
View 3 Replies View Relatedwhat is terminal and workstation in networking? I assume they mean client computers.
View 2 Replies View RelatedI am setting up the network for the computer institue I work for. We are discarding the old network and are going for a new network. There will be 2 Computer Labs with 60 computers in each Lab. The staffroom will have 20 computers. The Accounts department will have 5 computers. All the departments are in the same building with just 2 floors. It will be a wired network. All computers should have access to the Internet. There will be a printer each in the 2 Labs, staffroom & accounts department which has to be shared with their respective network. The Lab computers will run MS Office, Adobe software etc. Likewise the the staffroom and accounts department computers will also have to run MS Office and probably Adobe software as well. We will be using Windows Server 2003 and are inclined to use IBM servers due to a partnership. Cost isn't a major issue and the management is willing to spend to set this up rightly in the first place.My main question is whether we should go for a thin client network with everything running in the main servers. In that case how many servers should we have and what would be the ideal config of those servers.If we go for workstation PCs for each user if cost isn't an issue then what are the benefits over thin client computersDo we have to have a separate server for data?
View 5 Replies View RelatedI keep getting a 50% loss on one workstation. I tried switching out the network card and that seems to have resolved the issue... Do network cards exhibit strange behavior when they fail or am I overlooking a deeper issue?
View 1 Replies View Relateda workstation on our domain running windows 7 64 bit downloaded updates from microsoft. There was about a hundred of them. Since they installed the machine won't connect to the network shares. It can access the internet easily enough. The Workstation Service won't start. It comes up with an error 1068: The dependancy service or group failed to start. I used System restore to go back before the updates and everything worked again. Installed the updates and the problem re-appears. I have 2 wireless network adaptors so I disabled one.
View 2 Replies View RelatedI have a hardwired network with 10 workstations plugged into switch. Printer plugged into switch. Server plugged into switch.Switch plugged into router.Router DHCPs except printer is static IP. All have access to internet through server then out through router.Have added another workstation that is not allowed access to the network (on purpose) but needs to be able to use the printer. The workstation is not under our security for virus control, etc so I don't want it in the server. But it needs access to internet and access to printer. Should I create a separate subnet from the router and keep the workstation separate there? If so, then how can I keep the printer accessible to both subnets?
View 1 Replies View RelatedI have got 2 workstations: test-pc and laptop-pc. Both 2008 server Sp1 x64 Both are added to Domain - 2003 server x86.My problem is:I cannot access shared folders on laptop-pc From test-pc if I am not physically logged in onto both machines. When I logged in as an administrator on both - everything is fine, but if I will turn laptop-pc on and leave it on Windows logon screen (without login) I wont be able to access anything on it.Is there anything I should enable/disable on Domain Group Policy to fix it?
View 1 Replies View Relatedis it possible to install cisco acs 5.4 on vmware 8 workstation ?
View 1 Replies View RelatedI am trying to do a PXE Boot with a M50 Precision Workstation. I have flashed my BIOS to A12. When I boot up, I get PC Boot Agent 4.31 and PXE 2.41. It starts to do the DHCP, however it errors out with the message:
PXE-E51: No DHCP or proxy DHCP offers were received.
i than when installed WMware Workstation my LAN connection have been hidden,when plug into cable TP CAT5 to Connector does not show in Network And Sharing center in Windows 7?
View 3 Replies View RelatedIf you have problems setting up a computer as a domain controller,what would be the best approach? Four DNS Zones you can configure? What policy would you use to record unsucessful logons to a workstation?
View 4 Replies View RelatedI have a Vista Workstation that out of the blue today stopped connecting to the internet after applying the windows updates. I have gone back and rolled them out but it still will not connect.It is hardwired (Ethernet) to a cisco e4200 router that gets its internet from a motorola surfboard cable modem. I tried it with a wireless connection and had the same issue.Other computers on the network work fine both connected with ethernet and wireless. It won't assign an IP even though dhcp is enabled on the router, so I assigned a static one and it sees the local network just fine, I'm copying files from it to my NAS server without a problem.
View 4 Replies View RelatedMy laptop lcd screen has died. No replacement part, 9 years old. I have attached a cat5 cable from my laptop to my router. how do I see the laptop hardrive on my work station.
View 1 Replies View Related
