Cisco WAN :: 2800 / VPN Client Gets Connected But Cannot Ping Local LAN
Jan 18, 2013
I am trying to connect my 2800 Series CIsco Office router with VPN client software from home. I can successfully authenticate and get the IP address from the pool configured but couldnt ping any LAN Ips including default gateway. I am pasting my router's configuration.
IP Address Of LAN: 192.168.22.x/ 24
IP Addresses handed out to Clients: 10.10.10.5- 10.10.10.20
aaa new-model
!
!
aaa authentication login default local
[code]....
I have noticed that my virtual-access interface comes up but the line protocol of virtual-interface remains down as follows:
Virtual-Template100 x.x.x.x YES TFTP up down
Also The client PC picks up a random gateway of 10.10.10.1 which I never configured anywhere on the server.
View 26 Replies
ADVERTISEMENT
Mar 28, 2013
I'm trying to configure a 2800 series router. .I'm consoled in and put a basic config on the router (see attached). After putting this basic config on, I plugged it into a small unmanaged switch, changed my laptop's IP and plugged it in the switch also. I can't ping the router from the laptop and vice versa. This is the second switch I've tried this with, so it must be.The first switch, I installed at location, connected a cisco cable to it and a local server, so i could remote in and finish configuration. In that scenario, I had plugged the switch into a managed switch and had the same result as I'm getting now--can't ping IP addresses (can't ping the switch's IP, not can it ping local IPs).
View 2 Replies
View Related
Apr 21, 2013
CISCO ASA 5520 -K9 .Client can connects ASA server and get ip address(172.168.31.X),but can't ping ASA inside interface ip address and other servers in lan .
View 2 Replies
View Related
Feb 7, 2013
I wounder if there is any way to ping the local deviceses connected to a network hosted by a Cisco 1921 router? I wan't to be able to ping the device(computer name) but currently cant do that.
View 1 Replies
View Related
Mar 17, 2013
I have created a VPN connection for ASA 5512-X by using the wizards and nothing seems to be wrong on the wizards's config.I am able to connect to the network by using the VPN but unable to ping internal network.Below is my config for your reference:
Result of the command: "sh run"
: Saved
:
ASA Version 8.6(1)2
!
hostname FAA-ASA-1
enable password crzcsirI44h2BHoz encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
[code].....
View 6 Replies
View Related
Feb 23, 2012
I have 2 2800 series routers configured the same, but with different subnets. One works fine, the other the client can't obtain an IP, and hardcoded, cant ping.
I ran DHCP debug and I can see the router assigning the IP, and I see and ARP entry that matches the MAC of the client.
*Feb 24 11:33:55.915: DHCPD: Sending notification of DISCOVER:
*Feb 24 11:33:55.915: DHCPD: htype 1 chaddr 000a.e40c.d232
*Feb 24 11:33:55.915: DHCPD: remote id 020a0000ac10760101000078
[Code].....
View 3 Replies
View Related
Dec 6, 2012
I'm having an issue where internal hosts cannot access the internet but I am able to ping external hosts when I console into the router. The router is a 2800 series. [code]
View 3 Replies
View Related
Jun 2, 2011
We have configured an cisco 2800 for vpn clients. The weird thing is that after some time (not specific time interval and no idle connection) asks for re-authentication. Some times after re-authenticating session disconnects.
View 2 Replies
View Related
Apr 25, 2012
I have intergrated wlc module in 2800 series cisco router, switch, cisco 1130 lightweight access point, i configured dhcp on router for wireless client, deal is that AP taking ip address from router its ok, but client cannot take dhcp, what im doing wrong? here is configuration of wlc router and switch
wlc configs/
config interface address management 172.16.1.10 255.255.255.0 172.16.1.250
config interface address ap-manager 172.16.1.11 255.255.255.0 172.16.1.250
[Code].....
View 1 Replies
View Related
Mar 3, 2013
I recently added a business cable modem to relieve some of the congestion I was getting on my T1 for our MPLS network. There was an ASA 5510 collecting dust in a closet here and I thought it would be the perfect device for firewalling the traffic coming in from the Cable modem, and handling the routing of our internal MPLS traffic as well. Internet setup was cake. The test laptop I have using the ASA as it's gateway has great internet service but it cannot ping across either of our MPLS networks. I have one MPLS with AT&T and one MPLS with EarthLink. My hope was to use the cable modem as the Default route for all unspecified internet traffic and route our internal MPLS traffic to the cisco 2800 routers that are currently in place for the MPLS. I can ping across the MPLS when I telnet to the ASA, but I cannot ping across the MPLS from the client that is connected to the ASA.
Here's the topology I'm working with
Internet
|
Cable Modem
|
ASA 5510 10.52.120.23
[Code].....
View 8 Replies
View Related
Feb 21, 2011
The public IP address of my 2800 router where all VPN clients terminate will change shortly. There are some technique to auto-change the client´s profile for clients to connect to the new IP address? I have seen that VPN 3000 concentrator is able to do this so i can´t get one of those right now
View 1 Replies
View Related
Apr 23, 2011
i have configured remote access vpn on my 2801 router's gio0/0 int ip x.x.x.1. i connected my laptop through vpn client from internet. i connected successfully and my vpn router gives me the assigned ip block y.y.y.1. from my laptop i can ping the other int gio/1 ip z.z.z.1 but i cant ping the ip z.z.z.2 of my core sw which is connected on router's int gi0/1.
View 14 Replies
View Related
Jan 4, 2011
I have a cisco router 2811 connected on other two routers but can't ping any of them from any of them too (frame-relay encap correct) DLCI mapping ok all ip configured only router 2 's line protocol is up the rest is down on others and seems LMI sent are not receive and do know how correct that
View 1 Replies
View Related
May 21, 2011
I just installed a new ASA 5505 for an office with three internal subnets.* The three networks can each get online fine and ping eachother, but cannot browse to shares on the two internal networks other than their own.* How do I configure the ASA to allow all traffic between these three inside networks?
192.168.152.0
192.168.152.0
192.168.154.0
[code]....
View 8 Replies
View Related
Apr 3, 2013
I'm using 3 AP's 1140 with local authentication using local radius (flex connect mode).the radius server im using is MS 2008 R2.authentication is working great on all devices pc's&mobile.authentication method is PEAP wpa2 aes enterprise.after 3 or 4 hours devices loose connectivity to the web.the device seems to be still connected to the ap but there is no ping to host from local lan or any arp learnd on local router.only manual disconnect on device and reconnecting brings connectivity up again.in one case only reseting the AP's worked.
View 6 Replies
View Related
Nov 27, 2012
I cannot ping mydomain.local from any computer on my network. In order to this, I have to set DNS 1 as my server's ip address, then I can ping it. The reason this is a problem is because in order to add a workstation to my domain, I have to manually configure DNS to my server's ip. I have two networks, all new systems and this occurs on both. So obviously it is the way im setting things up[CODE]
View 13 Replies
View Related
Jul 24, 2012
I have, what I believe to be, a simple issue - I must be missing something. Site to Site VPN with Cisco ASA's. VPN is up, and remote hosts can ping the inside int of ASA (10.51.253.209). There is a PC (10.51.253.210) plugged into e0/1.
I know the PC is configured correctly with Windows firewall tuned off. The PC cannot get to the ouside world, and the ASA cannot ping 10.51.253.210.
I have seen this before, and I deleted VLAN 1, recreated it, and I could ping the local host without issue. Basically, the VPN is up and running but PC 10.51.253.210 cannot get out
ASA Version 7.2(4)
!
hostname *****
domain-name *****
enable password N7FecZuSHJlVZC2P encrypted
[Code]...
View 2 Replies
View Related
Jul 18, 2012
Ive got my home lab setup with two 2610 routers hooked togeather with a DTE/DCE Crossover and I have OSPF configured on both routers. Each router has one 3550 switch connected to each FA0/0 inteface. The issue is that Everything can be pinged except my windows 7 PC connected to the R1 LAN. Everything else can be pinged from any other device. I checked the PC gateway configuration, disabled the firewall and checked my switch configuration! Is their something that I need to change in Windows?
Windows PC ------------ 3550 Switch-------------R1-----------------------------------R2---------------------3550 Switch----------------------Linux Box
Windows PC can't ping past the FA0/0 interface between the switch and R1
View 7 Replies
View Related
Oct 12, 2011
i can't get my ping of client ip.
View 1 Replies
View Related
Sep 20, 2011
ASA 5510 configuration for Csco anyconnect vpn client. Currently ASA is configured for self-signed certificate acces thru anyconnect ssl vpn. So the cert is being generated with every connection (of my understanding, I haven't found any identity certificate on the current configuration, at least on ASDM). Now I need to use a certificate from our local windows CA that we have at the office. I.e. self-signed certs should be changed with another one issued by our local office authority.
1. Generated new rsa key pair on the ASA
2. Generated CSR from identity certificates
3. Applied CSR to the windows CA and generated the certificate
Now I need to understand what is going to happen after I install this certificate on the ASA's identity certificates and apply it to outside interface. Is there anything to be done on the users side to use new certificate? Do they need to download and install the root certificate from the same CA? Do i need to have the root certificate installed on the ASA or identity is enough?
View 1 Replies
View Related
Jul 18, 2012
This is the second time I have had this issue happen. Here is some probably useful information:
-I have (2) HP Pavillion dv6000 laptops running on Vista
-I have (1) iPad 2
-I am using a Belkin Surf N300 router
We lost power due to a storm last week, and both of my laptops would not connect to the Internet. I could connect to the router with access saying local only. I called Belkin and they changed some information on my laptop to allow me to connect. Now, I have the same issue with my other HP laptop and again called Belkin but they could not fix the issue. I can connect to the router and use the Internet on my iPad and (1) of my HP laptops, but not my last one. Even when I connect to the router with an Ethernet cable, it says local only access and no internet connection. So I did the ipconfig /all on both laptops and here is what they say..
Laptop that does NOT connect to Internet shows this:
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Melanie-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
View 6 Replies
View Related
Jan 8, 2013
Can't get access to the Internet. Says "server not found" on Firefox and IE doesn't work as well.Not a modem issue I don't think, all lights are working. Called my ISP they couldn't fix the issue.I pinged my IP address I get a response although I can't ping my DNS serverI am using my cellphone so I can't install any programs on my PC.Here is the details using ipconfig / all[CODE]
View 14 Replies
View Related
Nov 15, 2011
I have a VPN client running on a laptop connected a DSL circuit. The VPN client is configured correctly for an external address on another firewall, this external firewall passes through ISAKMP / IPSEC to an ASA where it terminates. The client authenticates and gets an address from the client pool (VPNCLIENTS – 10.2.16.x / 24) and the tunnel completes with no problems. From the internal ASA I can ping any internal network behind the 10.0.3.240 interface (INSIDE) and I have a route on the inside network to get to the 10.2.16/0 clients to point to this address (10.0.3.240). All good so far.
Now the problems begin. I cant ping anything from the VPN clients (10.2.16.0) network to anywhere, I cant ping any interface on the ASA or any internal network. I also cant ping the client from the ASA and therefore not from the internal network either. This configuration is bare bones configuration so I don’t even have the NAT exception rules added. Network diagram attached too.
interface Ethernet0/0
nameif outside
security-level 0
[Code]......
View 3 Replies
View Related
Oct 4, 2012
I am configuring remote access vpn on ASA5505.Everything is working fine so far, except when the client got connected, it still used the local DNS server provided by the ISP. How do I force the client to use the DNS server configured on ASA?
View 7 Replies
View Related
May 7, 2012
I insert data from two clients.(1 window server 2003,2 XP clients ) the two client print paper and the printer is shared printer. At the same time two clients print paper and the printer stop working. So I restart my two clients and server. After restart the clients cannot ping to server.
View 1 Replies
View Related
Aug 22, 2011
I got a used computer from my relatives. When i enable my local area connection then it says aqcuiring ip adress for a while. Eventually it stops trying and says network cable unplugged. It worked fine at my relatives place, but not at my place.
View 14 Replies
View Related
Feb 2, 2011
When i connect VPN in server site then I can't use my Local Internet connection?
View 1 Replies
View Related
Jan 31, 2011
My computer is not connected to the local area connection.even though the network cable is plugin.
View 1 Replies
View Related
Mar 27, 2011
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows Vista Home Premium , Service Pack 2, 32 bit
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-58, x64 Family 15 Model 104 Stepping 2
Processor Count: 2
RAM: 1982 Mb
Graphics Card: NVIDIA GeForce 7000M / nForce 610M, 64 Mb
Hard Drives: C: Total - 140647 MB, Free - 62895 MB; D: Total - 11978 MB, Free - 1512 MB;
Motherboard: Quanta, 30EA, 86.09, None3
Antivirus: Webroot AntiVirus with Spy Sweeper, Updated and Enabled
Computer will connect to non secured WIXFDR-117 Clear wirless but when I set any authentication security types it only connects to the modemn and not to the internet.I get a Local connection only on the networking screen.I have tried WPA and WPA2 with TKIP and AES encryptions.It also will not connect using the ethernet cable on any settings.This computer did connect to a secured network though a 3 year version of netgear but I do not know the security settings.
View 8 Replies
View Related
Jun 14, 2012
Sometimes for a minute sometimes all day until I reset modem/router. It never says not connected though...it always says connected and excellent signal strength but when it won't access internet I can look at my modem/router and tell by the lights its not working even though it says connected. This time even though I reset everything like normal I still can't access internet. I thought it might have been my router so I went and bought a new one and still nothing. Doesn't work wireless or through local connection. Both say connected but nothing. When I do a diagnostic I get the DNS 0x2afc and HTTP 12007 errors. Both computers won't connect so I'm thinking it has to do with my actual router settings or modem.Both Windows XP and Windows 7 laptops won't work.
View 11 Replies
View Related
Aug 28, 2012
I am having a weird issue with my Cisco 7200 router. From the router i am able to ping and reach out to the internet but from the client i am able to reach out to the internet but unable to ping I am not sure where is the issue but when i traceroute to it my packets are dropped at my routers interface. All my pings from the client time out. I checked the Access list to make sure ICMP is not blocked. Following is my running conf
ip audit notify log
ip audit po max-events 100
ip ssh break-string ~
ipv6 unicast-routing
no ftp-server write-enable
[code]....
View 2 Replies
View Related
Mar 28, 2012
I just setup my home network with Pix 515 acting as my router/firewall but I can't seem to ping my internal PC from my ASA. I can access the internet and ping my Pix 515 inside interface from my pc but I can't ping my pc from my Pix 515. I can also renew/release IP's from my PC. I also did a packet tracer and it says that it was dropped due to an access list but I have one in place. Also my switch has the default config. Below is my config
Internet <----> Comcast modem <-----> Pix 515 <-------> Cisco switch <-----> PC
MYFIREWALL# sh run
: Saved
[Code].....
View 4 Replies
View Related
May 27, 2013
I have an ASA 5510 with the configuration below. I have configure the ASA as remote access vpn server with cisco vpn client, my problem now is I can connect but I can't ping.
Config
ciscoasa# sh run
: Saved
[Code].....
View 14 Replies
View Related
