Can't get access to the Internet. Says "server not found" on Firefox and IE doesn't work as well.Not a modem issue I don't think, all lights are working. Called my ISP they couldn't fix the issue.I pinged my IP address I get a response although I can't ping my DNS serverI am using my cellphone so I can't install any programs on my PC.Here is the details using ipconfig / all[CODE]
View 14 RepliesI usually acess internet on Wi-Fi, and now I have travelled, and got my laptop with me. The internet here is Local Are Connection, the one with the cable, and it says I am connected, 100 Mbps, but no internet access! I can't browse or open anything that has to do with the internet... However, It works perfectly fine on EVERY other laptop. I've searched a lot of places and I've been told to write commands like ipconfig/ all andd netsh int ip reset.log but when I do that I get "The following command was not found : int ip reset.log" I set the properties in TCP/IP to Automatically detect settings .. but nothing.
View 14 Replies View RelatedI got a used computer from my relatives. When i enable my local area connection then it says aqcuiring ip adress for a while. Eventually it stops trying and says network cable unplugged. It worked fine at my relatives place, but not at my place.
View 14 Replies View RelatedMy computer is not connected to the local area connection.even though the network cable is plugin.
View 1 Replies View RelatedI have wireless connectivity, but my ethernet local area post will not work. Pinged 198.168.1.1 but got 4 timed out messages. Checked hardware condition and the controller card says it is functioning properly. Running Network Properties shows only the wireless connections, with Local Area Port disconnected.
View 16 Replies View RelatedI can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1.
View 1 Replies View RelatedI am now using my dell optiplex 755, with windows xp sp3. The first set up was with wireless ,which works fine, but now I am trying to use the ethernet to netgear switch, to comcast modem, from dell desktop, I get error that says,TCP/IP is not enabled for thisconnection.Can not proceed. I have also tried to repair local connection with the Icon at the bottom, it has error that says ,local area connection.This connection has limited or no connectivity.do I need a new IP address for the this connection? I have tried to run ethernet from modem to computer ( to by pass the switch
View 5 Replies View RelatedHow do I connect to internet using Local Area connection? I only access internet via wireless connection. With Local Area connection, IPv4 and IPv6 do not have internet access[CODE]
View 8 Replies View RelatedI can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1
View 5 Replies View RelatedI can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1.
More info:
ip config /all
netstat -n
ping&tracert 192.168.1.1
This is the second time I have had this issue happen. Here is some probably useful information:
-I have (2) HP Pavillion dv6000 laptops running on Vista
-I have (1) iPad 2
-I am using a Belkin Surf N300 router
We lost power due to a storm last week, and both of my laptops would not connect to the Internet. I could connect to the router with access saying local only. I called Belkin and they changed some information on my laptop to allow me to connect. Now, I have the same issue with my other HP laptop and again called Belkin but they could not fix the issue. I can connect to the router and use the Internet on my iPad and (1) of my HP laptops, but not my last one. Even when I connect to the router with an Ethernet cable, it says local only access and no internet connection. So I did the ipconfig /all on both laptops and here is what they say..
Laptop that does NOT connect to Internet shows this:
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Melanie-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
When i connect VPN in server site then I can't use my Local Internet connection?
View 1 Replies View RelatedSometimes for a minute sometimes all day until I reset modem/router. It never says not connected though...it always says connected and excellent signal strength but when it won't access internet I can look at my modem/router and tell by the lights its not working even though it says connected. This time even though I reset everything like normal I still can't access internet. I thought it might have been my router so I went and bought a new one and still nothing. Doesn't work wireless or through local connection. Both say connected but nothing. When I do a diagnostic I get the DNS 0x2afc and HTTP 12007 errors. Both computers won't connect so I'm thinking it has to do with my actual router settings or modem.Both Windows XP and Windows 7 laptops won't work.
View 11 Replies View Relatedi want to know how to set up a local area network
View 3 Replies View RelatedI have a Dell desktop with Windows XP Home Edition. I recently restored the computer to factory settings and when I tried connecting to the internet the Local Area Connection wasn't showing in My Network Places. I have been searching through other forums and tried the things that they suggested but nothing worked. I am trying to connect to an AT&T U-verse 2Wire router through a wired connection. I tried connecting both wirelessly and wired to another computer and everything worked fine. I checked the Device Manager and there is an ! mark next to the Ethernet Controller. The properties say that the drivers for that device aren't installed. And of course I can't install them since I can't access the internet. Other forums suggested that I check the network adapters option in Device Manager but that isn't available in the device manager.
View 3 Replies View RelatedMy error message states that "Windows could not finish repairing the problem because the following action cannot be completed: Registering with DNS".I have no internet connection on my HP PC, which is why I am typing this on my laptop.On the HP I am running windows xp with sp3.I connect to a cable modem provide by Time Warner.This problem started yesterday, so I have been utilizing both computers with one internet connection, or plugging and unplugging the cat5 cable.I have run Microsoft Essential Full scan, as well as Malwarebytes's Anti-malware.Now I ran both of those in Safe mode, and picked up no bugs. I have Avast as my antivirus software, and the message I receive on that is that "Avast will not be able tp protect mail/news (error 10050). I am unable to turn on the web shields for Avast.I have manually entered the IP addresses into my HP from my laptop, all the way thru DNS servers.It still won't connect.I tried using the Internet explorer diagnostic tool, and it came back and said that I have a winsock issue.
View 14 Replies View Related1. Internet works ok, everything is fine, but then it stops working for no reason.
2. I open Network and Sharing Center, and do diagnostics. They come up with result: "the default gateway is not available". Nothing works. But Local Area Connection and Network Controller are both enabled.
3. I have to restart computer for the internet to work again. However, it doesn't restart: it hangs forever in "shutting down" screen, and nothing happens. Probably because computer is still trying to connect to the internet (?)
4. After forced restart, internet doesn't work, but if I run diagnostics again, they come up with result: "The Local Area Connection adapter is disabled", and fixes it automatically. Internet works then.
My internet is working fine, but my Ethernet cannot get a connection. On my Ethernet Local Area Connection it says status is: Limited or no connectivity i am running an Ethernet cable from my xbox 360 to the Ethernet adapter slot at the back of my computer, no wireless or anything. And as i say the internet works fine though i cant get any connectivity out of the Ethernet adapter.This used to work fine two weeks ago, now it refuses to work i recently moved and so i disconnected my pc nothing broke and all it did was sit around in a safe place before the move EVERYTHING worked fine, On my xbox the display says:Network adapter - wired IP address - failed?i'm running windows xp sp 2?
View 1 Replies View RelatedOk so my dell Inspron desktop has had many internet related issues before, but this time it can't find the local area connection. I have taken the Ethernet cord and plugged it into the laptop im posting on and it works just fine so it is a problem with the computer.
View 7 Replies View RelatedI got a new CPU but after 3-4 months I use it, my local area connection is gone.It cannot detect the internet. I use Acer Aspire M1800. OS is Vista.Also, I get error 0x800706ba
View 14 Replies View RelatedI wasn't able to connect to my modem's Ethernet for a month, before that, i was able to use my Ethernet when connected to PC, but when i threw it away, i tried many time to connect to my modem' Ethernet but all the attempts were a failier.......Is it because of the cable that i must connect or is it the com or modem that is wrong?
View 1 Replies View RelatedI have just recently installed a new router for my home and the ethernet connection stopped showing up. It instead said "no connections available". I figured the onboard network adapter gave out because of the orange light it gave off and bought a NetGear GA311 network adapter. I installed it and updated it, but the connection still says there are none available.
View 7 Replies View RelatedI have xp pro sp3 i also connect thru fios since i restarted my computer last evening i can't connect this computer was put together for me so no original disks under network connections there is no lan connection can't use system restore tried ipconfig but says internal error and thats all when i try safe mode i see all of the network adapters but i don't see it in regular boot.
View 3 Replies View RelatedI am having this same issue. Except under Network Adapters, I don't have a yellow question mark. I have a amd Athlon(tm) 64x2 dual core processor and operate with windows XP professional service pack 2. my other computer (this pc im using) i have no problem with the connection I can to the the Internet
View 2 Replies View Related-No hardware profiles on "change adapter setting."-Network Adapter isn't shown in Device Manager.-Reinstalled windows 7 and problem still persist.
View 4 Replies View Relatedhow to increase local area conection speed 10mbps to 100mbps?
View 2 Replies View RelatedMy internet is working fine, but my Ethernet cannot get a connection. On my Ethernet Local Area Connection it says status is: Limited or no connectivity i am running an Ethernet cable from my xbox 360 to the Ethernet adapter slot at the back of my computer, no wireless or anything. And as i say the internet works fine though i cant get any connectivity out of the Ethernet adapter.This used to work fine two weeks ago, now it refuses to work i recently moved and so i disconnected my pc nothing broke and all it did was sit around in a safe place so happened before the move EVERYTHING worked fine On my xbox the display says:Network adapter - wired IP address - failed Im sooo so confused with what to do now, anyone got any suggestions?
View 20 Replies View RelatedIm planning to do a LAN for internet/file sharing and of course LAN game There are people that living far from each another like 1 mile away.... thats a problem.Cat5 Ethernet cables are not made for long distance connectivity ( 100 meters of length max, otherwise bad connection).So because i need a connectivity between pc's for long distance I can use Wireless, expensive, and because I prefer wired and I heard that there is a way to convert CAT5 cable into phone line, because phone lines can be used for long distance connectivity without problems.So I wonder if there is a way to do that LAN connectivity using phone lines.RJ45 to phone line, do they exist these adapters? if yes, will this work for me
View 3 Replies View Relatedi have a ISDN connection i have got 1 static WAN ip and 7 static LAN ip . i have connected it to a server 2008 r2 given that the WAN ip and shared it how do i assisgn 7 LAN static IP in local area network
View 3 Replies View RelatedMy laptop (win7) can connect to wireless, but not Local Area Connection.This is the capture of my device manager, it reported that the driver of ip6 failure.but I do not think ip6 relates.I tried configuring a static IP address, reinstalling network driver, or disabling and enabling network cards.
View 11 Replies View Relatedhowdy,im having trouble with my LAC.it just keeps identifying.i have tried everything,uninstall/reinstall, netsh winsock reset,netsh int ip reset,disable/enable.windows diagnostics comes back with invalid ip address,and modem hardware failure.device manager lists the network adapter as working,yet it doesn't here's my ipconfig[CODE]
View 5 Replies View RelatedI've tried most solutions online that I can find with similar problems, but to no avail. I'm using Windows 7 (64 bit), by the way.
Here's a copy of my "ipconfig /all" :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
[Code].....
I cant find the local area connection in (change adapter settings).
View 1 Replies View Related