i have a ISDN connection i have got 1 static WAN ip and 7 static LAN ip . i have connected it to a server 2008 r2 given that the WAN ip and shared it how do i assisgn 7 LAN static IP in local area network
View 3 Repliesi want to know how to set up a local area network
View 3 Replies View RelatedOk so my dell Inspron desktop has had many internet related issues before, but this time it can't find the local area connection. I have taken the Ethernet cord and plugged it into the laptop im posting on and it works just fine so it is a problem with the computer.
View 7 Replies View RelatedI have just recently installed a new router for my home and the ethernet connection stopped showing up. It instead said "no connections available". I figured the onboard network adapter gave out because of the orange light it gave off and bought a NetGear GA311 network adapter. I installed it and updated it, but the connection still says there are none available.
View 7 Replies View RelatedIm planning to do a LAN for internet/file sharing and of course LAN game There are people that living far from each another like 1 mile away.... thats a problem.Cat5 Ethernet cables are not made for long distance connectivity ( 100 meters of length max, otherwise bad connection).So because i need a connectivity between pc's for long distance I can use Wireless, expensive, and because I prefer wired and I heard that there is a way to convert CAT5 cable into phone line, because phone lines can be used for long distance connectivity without problems.So I wonder if there is a way to do that LAN connectivity using phone lines.RJ45 to phone line, do they exist these adapters? if yes, will this work for me
View 3 Replies View RelatedI can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1.
View 1 Replies View RelatedI keep getting this pop up message that says "local area network limited or no connectivity". It appears every 20-30 seconds and drops my internet connection. When I click on the message and opens up the connection box, it states it's functioning properly.
View 6 Replies View RelatedI can connect to my LAN at home and now am away for the winter and my wife's laptop connects automatically and mine will not detect a network with the same exact hookup
View 1 Replies View Relatedprint online with local area network
View 1 Replies View RelatedI am not able to browse my local area network. I get internet fine. I have a vista laptop connecting wirelessly and the dir-655 is connected to a giga switch. The rest of my network is connected to that switch.
View 13 Replies View RelatedLocal area connection says there is a network cable unplugged. There are non unpluged. should I just leave it be? My computer is working fine
View 1 Replies View RelatedLocal Area Connection - Network Cable Unplugged I am using Professional 2000 and have a Linksys WRT54G Version 8.2 Wireless Router...have broadband connection through Brighthouse. My laptop works fine but my desk top computer keeps giving me this message.I have checked all the connections and even bought a new network cable to see if it was a hardware issue.
View 1 Replies View Relatederror: "local area network doesn't have a valid ip configuration"
Problem on another machine:
aCER aSPIRE w/ windows 7 Had internet previously; no changes made to machine EXCEPT swapped hardware internet connection from Links router to a temp set up on a laptop.Couldn't get laptop to connect via hardware - went wireless instead Upon return of cable to ASPIRE, got above error message. Running connection Wizard doesn't do it!
I am planning to deploy a "Digital Notice Board system" in my office, which gets feed from web server and display data/stream on LCD Screen. Well i am done with implementing all the interface on server side and its working pretty well with client side computer. But instead of using Client Side Computer, I just want to use LCD and make some network interface of Local Area Network directly with LCD (to save cost/installation/maintenance of a dedicated computer with LCD ).
View 1 Replies View Relatedjust a couple of days ago i started having problems with my internet, I can't seem to connect via an Ethernet cable?
View 1 Replies View RelatedMy computer is running on Windows 7. It has had no prior internet connection problems. It is wired to my DV-2020 router. My internet suddenly disappeared, as in, it doesn't work anymore. I'm not sure as to when it disappeared due to my personal absence, but from what I heard it was either during 'starting a game' or 'installing firefox add-ons updates'. Internet does work on other computers sharing the same internet (wired and wireless). On the computer that does not have access to internet it gives a "local area connection - No Network Access" and "local area connection - unidentified network." So far I've tried:
A system restore.
Restarting the router (at home as well as the provider)
Changing wiring.
Disabling / Enabling.
Disabling virusscanner.
My local area network connection disappeared from system tray
View 4 Replies View RelatedThe link to Local area connection on the PC i am working on is no longer showing under Network and Sharing center. However the connection is up and I can access the internet. If I do an ipconfig /all I see the adapter setting as I set them. In device manager the device is working properly. I checked the BIOS and the NIC is enabled
View 4 Replies View RelatedI can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1
View 5 Replies View RelatedI can't connect to the internet. When I double click Local Area Network under Network connections it says it has both sent and received packets. It is set to automatically acquire an ip address. The computer is connected to a router. I can ping 192.168.1.1 but when I try to reach my router's settings it says page can't be loaded. I tried to hook the computer up directly to the modem and connect that way. It said it was connected and it was sending packets but I still couldn't do anything. I've turned off the windows firewall. The computer is Windows XP SP1.
More info:
ip config /all
netstat -n
ping&tracert 192.168.1.1
How do I configure a local area net work with unbounded media?
View 1 Replies View RelatedVery soon for the second time we will be replacing systems in our (grad school) student computer Lab from the time of its opening in January, 1998. The monitors are recessed down below glass desk surfaces and are 17-inch CRT (Dell).Our current (medium) computers are SFF GX-150 and have 512MB RAM (doubled from the original 256) and 80 GB hard drives. The new GX620 will have 2GB RAM, 160MB hard drive.In addition, our current 10/100 Ethernet LAN for this part of the campus is also supposed to be upgraded to Gigabit (switch). Any experience of using Gigabit in an organization's local area network to find out any concerns for which I should be alert as we begin this new phase. Incoming students arrive before middle of August so the switch-out needs to be done fairly quickly and smoothly. What concerns should I have?
View 3 Replies View RelatedI have a Lenovo t42 with with Windows XP SP3.
The "Local area network connection" is not visible in Network Connections. The Ethernet controller and adapter driver is properly install (no yellow signs). All Network services are also running properly.
The network is working fine, and getting an IP address from DHCP but has to restart the DHCP service once after booting.
I am using hp pressario C7000 with window 7 32 bits. Can not access the internet. The reports 'local area network doesn't have a valid ip configuration'.
View 1 Replies View RelatedHow to place security + a password on a folder that is shared on a local area network. i don't want other users to access the contents in the folder since we are all on the same local network.
View 4 Replies View RelatedMissing local area connection icon in network connection after power failure?
View 1 Replies View Relatedis it possible to setup a wired local area network using time capsule 2T as the router?
View 1 Replies View RelatedI am using a Lenovo ThinkPad X200 and want to setup a wired local area network.How could I achieve this?
Situation:I just want to connect to the internet and I have a cable connection at home.So, I just want to plug the cable line to my notebook (x200) so that I can access the internet via the cable.
But I don't know how to setup a local area connection in notebook. Since it automatically appear in my desktop, but not in my notebook.
I have a Dell desktop with Windows XP Home Edition. I recently restored the computer to factory settings and when I tried connecting to the internet the Local Area Connection wasn't showing in My Network Places. I have been searching through other forums and tried the things that they suggested but nothing worked. I am trying to connect to an AT&T U-verse 2Wire router through a wired connection. I tried connecting both wirelessly and wired to another computer and everything worked fine. I checked the Device Manager and there is an ! mark next to the Ethernet Controller. The properties say that the drivers for that device aren't installed. And of course I can't install them since I can't access the internet. Other forums suggested that I check the network adapters option in Device Manager but that isn't available in the device manager.
View 3 Replies View RelatedMy system is in LAN. IP is assigned by DHCP. Now i want to assign a STATIC IP to my system. There is no direct connection from vendor router to my PC. My network path is like this. From ISP vendor to Switch->Firewall-> LAN switch. how can i configure Static IP in my PC..
View 4 Replies View RelatedOk so I have a couple devices connected to it, but there's a trick with Android phones that users report better battery life assigning an Static IP to the phone, not dhcp or reservation. However I can't figure it out in this router as when I revoked the current address it wouldn't let me add a new one, and when I went to add one at .202 to be outside of dhcp range it doesn't let you and says to enter a number within the range, .100-.199
View 6 Replies View RelatedI've been given 4 more public static ip's and would like to use one of them static ip's to point to my sharepoint box, for example i want to be able to access my sharepoint boxweb site externally:
212.xxx.xxx.01 - my public pix ip
212.xxx.xxx.02 - is my owa for email (https://xxxxxxx.net/owa)
212.xxx.xxx.03 - my sharepoint box (https://xxxxxx.net/sharepoint)
212.xxx.xxx.04 - not assigned
What command do I have to input on the Cisco Pix 515 to make that work?
My error message states that "Windows could not finish repairing the problem because the following action cannot be completed: Registering with DNS".I have no internet connection on my HP PC, which is why I am typing this on my laptop.On the HP I am running windows xp with sp3.I connect to a cable modem provide by Time Warner.This problem started yesterday, so I have been utilizing both computers with one internet connection, or plugging and unplugging the cat5 cable.I have run Microsoft Essential Full scan, as well as Malwarebytes's Anti-malware.Now I ran both of those in Safe mode, and picked up no bugs. I have Avast as my antivirus software, and the message I receive on that is that "Avast will not be able tp protect mail/news (error 10050). I am unable to turn on the web shields for Avast.I have manually entered the IP addresses into my HP from my laptop, all the way thru DNS servers.It still won't connect.I tried using the Internet explorer diagnostic tool, and it came back and said that I have a winsock issue.
View 14 Replies View Related