Local Area Connection Says There Is A Network Cable Unplugged
Jun 29, 2011Local area connection says there is a network cable unplugged. There are non unpluged. should I just leave it be? My computer is working fine
View 1 RepliesLocal area connection says there is a network cable unplugged. There are non unpluged. should I just leave it be? My computer is working fine
View 1 RepliesLocal Area Connection - Network Cable Unplugged I am using Professional 2000 and have a Linksys WRT54G Version 8.2 Wireless Router...have broadband connection through Brighthouse. My laptop works fine but my desk top computer keeps giving me this message.I have checked all the connections and even bought a new network cable to see if it was a hardware issue.
View 1 Replies View Relatedjust a couple of days ago i started having problems with my internet, I can't seem to connect via an Ethernet cable?
View 1 Replies View RelatedHow do I connect to internet using Local Area connection? I only access internet via wireless connection. With Local Area connection, IPv4 and IPv6 do not have internet access[CODE]
View 8 Replies View RelatedMy computer is running on Windows 7. It has had no prior internet connection problems. It is wired to my DV-2020 router. My internet suddenly disappeared, as in, it doesn't work anymore. I'm not sure as to when it disappeared due to my personal absence, but from what I heard it was either during 'starting a game' or 'installing firefox add-ons updates'. Internet does work on other computers sharing the same internet (wired and wireless). On the computer that does not have access to internet it gives a "local area connection - No Network Access" and "local area connection - unidentified network." So far I've tried:
A system restore.
Restarting the router (at home as well as the provider)
Changing wiring.
Disabling / Enabling.
Disabling virusscanner.
My local area network connection disappeared from system tray
View 4 Replies View RelatedThe link to Local area connection on the PC i am working on is no longer showing under Network and Sharing center. However the connection is up and I can access the internet. If I do an ipconfig /all I see the adapter setting as I set them. In device manager the device is working properly. I checked the BIOS and the NIC is enabled
View 4 Replies View RelatedI have a Lenovo t42 with with Windows XP SP3.
The "Local area network connection" is not visible in Network Connections. The Ethernet controller and adapter driver is properly install (no yellow signs). All Network services are also running properly.
The network is working fine, and getting an IP address from DHCP but has to restart the DHCP service once after booting.
Missing local area connection icon in network connection after power failure?
View 1 Replies View RelatedI have a Dell desktop with Windows XP Home Edition. I recently restored the computer to factory settings and when I tried connecting to the internet the Local Area Connection wasn't showing in My Network Places. I have been searching through other forums and tried the things that they suggested but nothing worked. I am trying to connect to an AT&T U-verse 2Wire router through a wired connection. I tried connecting both wirelessly and wired to another computer and everything worked fine. I checked the Device Manager and there is an ! mark next to the Ethernet Controller. The properties say that the drivers for that device aren't installed. And of course I can't install them since I can't access the internet. Other forums suggested that I check the network adapters option in Device Manager but that isn't available in the device manager.
View 3 Replies View RelatedMy error message states that "Windows could not finish repairing the problem because the following action cannot be completed: Registering with DNS".I have no internet connection on my HP PC, which is why I am typing this on my laptop.On the HP I am running windows xp with sp3.I connect to a cable modem provide by Time Warner.This problem started yesterday, so I have been utilizing both computers with one internet connection, or plugging and unplugging the cat5 cable.I have run Microsoft Essential Full scan, as well as Malwarebytes's Anti-malware.Now I ran both of those in Safe mode, and picked up no bugs. I have Avast as my antivirus software, and the message I receive on that is that "Avast will not be able tp protect mail/news (error 10050). I am unable to turn on the web shields for Avast.I have manually entered the IP addresses into my HP from my laptop, all the way thru DNS servers.It still won't connect.I tried using the Internet explorer diagnostic tool, and it came back and said that I have a winsock issue.
View 14 Replies View Related1. Internet works ok, everything is fine, but then it stops working for no reason.
2. I open Network and Sharing Center, and do diagnostics. They come up with result: "the default gateway is not available". Nothing works. But Local Area Connection and Network Controller are both enabled.
3. I have to restart computer for the internet to work again. However, it doesn't restart: it hangs forever in "shutting down" screen, and nothing happens. Probably because computer is still trying to connect to the internet (?)
4. After forced restart, internet doesn't work, but if I run diagnostics again, they come up with result: "The Local Area Connection adapter is disabled", and fixes it automatically. Internet works then.
My internet is working fine, but my Ethernet cannot get a connection. On my Ethernet Local Area Connection it says status is: Limited or no connectivity i am running an Ethernet cable from my xbox 360 to the Ethernet adapter slot at the back of my computer, no wireless or anything. And as i say the internet works fine though i cant get any connectivity out of the Ethernet adapter.This used to work fine two weeks ago, now it refuses to work i recently moved and so i disconnected my pc nothing broke and all it did was sit around in a safe place before the move EVERYTHING worked fine, On my xbox the display says:Network adapter - wired IP address - failed?i'm running windows xp sp 2?
View 1 Replies View RelatedI got a new CPU but after 3-4 months I use it, my local area connection is gone.It cannot detect the internet. I use Acer Aspire M1800. OS is Vista.Also, I get error 0x800706ba
View 14 Replies View RelatedI wasn't able to connect to my modem's Ethernet for a month, before that, i was able to use my Ethernet when connected to PC, but when i threw it away, i tried many time to connect to my modem' Ethernet but all the attempts were a failier.......Is it because of the cable that i must connect or is it the com or modem that is wrong?
View 1 Replies View RelatedI have xp pro sp3 i also connect thru fios since i restarted my computer last evening i can't connect this computer was put together for me so no original disks under network connections there is no lan connection can't use system restore tried ipconfig but says internal error and thats all when i try safe mode i see all of the network adapters but i don't see it in regular boot.
View 3 Replies View RelatedI am having this same issue. Except under Network Adapters, I don't have a yellow question mark. I have a amd Athlon(tm) 64x2 dual core processor and operate with windows XP professional service pack 2. my other computer (this pc im using) i have no problem with the connection I can to the the Internet
View 2 Replies View Related-No hardware profiles on "change adapter setting."-Network Adapter isn't shown in Device Manager.-Reinstalled windows 7 and problem still persist.
View 4 Replies View Relatedi have installed linksys pci adapter with speed wmp54gs. i try and turn it on and it will not show any devices and it will not let me click on rescan the the only thing that highlights is exit when you open!
View 3 Replies View Relatedhow to increase local area conection speed 10mbps to 100mbps?
View 2 Replies View RelatedMy internet is working fine, but my Ethernet cannot get a connection. On my Ethernet Local Area Connection it says status is: Limited or no connectivity i am running an Ethernet cable from my xbox 360 to the Ethernet adapter slot at the back of my computer, no wireless or anything. And as i say the internet works fine though i cant get any connectivity out of the Ethernet adapter.This used to work fine two weeks ago, now it refuses to work i recently moved and so i disconnected my pc nothing broke and all it did was sit around in a safe place so happened before the move EVERYTHING worked fine On my xbox the display says:Network adapter - wired IP address - failed Im sooo so confused with what to do now, anyone got any suggestions?
View 20 Replies View RelatedMy laptop (win7) can connect to wireless, but not Local Area Connection.This is the capture of my device manager, it reported that the driver of ip6 failure.but I do not think ip6 relates.I tried configuring a static IP address, reinstalling network driver, or disabling and enabling network cards.
View 11 Replies View Relatedhowdy,im having trouble with my LAC.it just keeps identifying.i have tried everything,uninstall/reinstall, netsh winsock reset,netsh int ip reset,disable/enable.windows diagnostics comes back with invalid ip address,and modem hardware failure.device manager lists the network adapter as working,yet it doesn't here's my ipconfig[CODE]
View 5 Replies View RelatedI've tried most solutions online that I can find with similar problems, but to no avail. I'm using Windows 7 (64 bit), by the way.
Here's a copy of my "ipconfig /all" :
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
[Code].....
I got a used computer from my relatives. When i enable my local area connection then it says aqcuiring ip adress for a while. Eventually it stops trying and says network cable unplugged. It worked fine at my relatives place, but not at my place.
View 14 Replies View RelatedI cant find the local area connection in (change adapter settings).
View 1 Replies View Relatedhow to show a local area connection icon if its disappear, and if its say as a past item in customize notification
View 1 Replies View RelatedMy computer is not connected to the local area connection.even though the network cable is plugin.
View 1 Replies View RelatedI've been trying to set my IP to a static IP so I can host servers for a few different games and every time I change the IPV4 settings my internet stops working and when I troubleshoot it says "DHCP Not enabled for local area connection.".
View 5 Replies View RelatedI am trying to set up a wifi hotspot with my wireless adaptor. The connection between my ipod and the wireless adaptor in my computer seems to be working fine, but it doesn't connect further to the local area connection (ethernet).I tried to bridge the two networks but it doesn't work I get the error message "An unexpected error occurred while configuring the network bridge"[CODE]
View 4 Replies View RelatedMY laptop has a X in local area connection
View 2 Replies View RelatedI am using an ethernet cable to connect my desktop to a Linksys router but I am getting the following message "Local Area Connection" doesn't have a valid ip configuration.I have connected to other routers so I do not believe that the card is at fault.So far I have tried the following:
Swapping ethernet cables
Connecting to router
connecting to modem
power cycling router/modem/computer
downloading new driver
[code]....
my computer is custom made and it has been running just fine until recently. Usually when turn on my computer and login, my computer is connect to the internet. However recently I have not been able to connect with the local area connection and i'm currently on wireless connection. When i'm not using wireless my internet doesn't connect and I can't check my router by typing 192.168.1.1. I have a Linksys WRT54G and i'm using Vista SP2. I don't like using wireless at all and I want my connection to go back to normal[CODE]
View 9 Replies View Related