VPN Connected In Server Site - Cannot Use Local Internet?
Feb 2, 2011When i connect VPN in server site then I can't use my Local Internet connection?
View 1 Replies
ADVERTISEMENT
Cisco VPN :: 2911 Site-to-Site VPN / Local Server Access Internet
Aug 18, 2011I have a Cisco 2911 router configured with a couple of VPN tunnels . The issue that I am having is that I cannot access the servers (WEB,EMIL) thru the tunnel . After looking around found out that adding a route-map to my static NAT rule will fix the issue . Once I do that I am able to access the serves thru the VPN but my local machines lose internet access .So I have to delete the access list The issue seems to be with the Access list 110 permit ip [code]
View 5 Replies View RelatedCisco Firewall :: ASA 5505 - Local Host Names To DNS Server At Main Site
Mar 3, 2013 I ran into a very interesting problem that occurred today and I'm trying to figure out why it happened. If it was one ASA 5505 that just required the reboot, then I'd have just chalked it up to a glitch, but when we built a new AD/ DNS server on the main network at the main site and changed the 3 Remote site ASAs to point to the new DNS server in the DHCPD options, none of them could ping any local host names to the DNS server at the main site they were now pointing too, but external host names { URL} all translated and pinged fine.
From a laptop on one of the remote sites, we could ping the new AD/DNS server(192.168.0.3) and the old AD/DNS server(192.168.0.2) and everything else at the main site, and telnet to port 53 showed successful across the Easy VPN from the Remote site to the new server at the main site. When wire shark was added to the new DNS server at the main site, the DNS request and replies for {URL}, for example, came and worked fine, but any requests for local resources never made it to the server from the remote sites.
A reboot of one of the Remote Site ASA's corrected the issue. Then I rebooted the other two remote site ASAs, and now DNS was working fine for everybody. I had also tried clearing the ARP cache on the ASAs before resorting to rebooting them. I also tried rebooting the laptop thinking the local DNS cache needed cleared before resorting to rebooting the ASAs. I'm struggling to understand why external, public host names made it through and resolved from the remote sites to the new server at the main site, but anything local failed before even reaching the new server(The new DNS server could resolve requests made by computers at the main site, but the remote sites that traverse the Easy VPN from the ASAs failed). The new AD/DNS server is the only server configured for DNS for all remote site computers.
Is any of this making sense? I'm wondering if clearing the x late or local host tables would have corrected it without having to reboot. I'm just trying to grasp the understanding here and figure out what happened.
Cisco Wireless :: 2504 / Assign IP Addresses To Remote Site Wi-Fi Users From Local DHCP Server?
May 29, 2012Is it possible to assign IP addresses to remote site WIFI users from local DHCP server and forward all other traffic to 2504 WLC?
[WIFI Users] >--------<AP (DHCP server) >------ VPN ---------< WLC
Cisco VPN :: 5505 - Site To Site Connected But Cannot Ping Remote Site
Oct 11, 2011cisco products and am struggling getting a VPN going between an ASA 5505 and 5510. I have a VPN created (using the VPN wizward on both) and it shows the VPN is up, but I can't ping the remote site (from either side).
View 11 Replies View RelatedLocal Only / Not Internet / Connected To Belkin
Jul 18, 2012This is the second time I have had this issue happen. Here is some probably useful information:
-I have (2) HP Pavillion dv6000 laptops running on Vista
-I have (1) iPad 2
-I am using a Belkin Surf N300 router
We lost power due to a storm last week, and both of my laptops would not connect to the Internet. I could connect to the router with access saying local only. I called Belkin and they changed some information on my laptop to allow me to connect. Now, I have the same issue with my other HP laptop and again called Belkin but they could not fix the issue. I can connect to the router and use the Internet on my iPad and (1) of my HP laptops, but not my last one. Even when I connect to the router with an Ethernet cable, it says local only access and no internet connection. So I did the ipconfig /all on both laptops and here is what they say..
Laptop that does NOT connect to Internet shows this:
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Melanie-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
Local Area Connected No Internet?
Jan 8, 2013Can't get access to the Internet. Says "server not found" on Firefox and IE doesn't work as well.Not a modem issue I don't think, all lights are working. Called my ISP they couldn't fix the issue.I pinged my IP address I get a response although I can't ping my DNS serverI am using my cellphone so I can't install any programs on my PC.Here is the details using ipconfig / all[CODE]
View 14 Replies View RelatedLocal And Wireless Connected But Won't Access Internet
Jun 14, 2012Sometimes for a minute sometimes all day until I reset modem/router. It never says not connected though...it always says connected and excellent signal strength but when it won't access internet I can look at my modem/router and tell by the lights its not working even though it says connected. This time even though I reset everything like normal I still can't access internet. I thought it might have been my router so I went and bought a new one and still nothing. Doesn't work wireless or through local connection. Both say connected but nothing. When I do a diagnostic I get the DNS 0x2afc and HTTP 12007 errors. Both computers won't connect so I'm thinking it has to do with my actual router settings or modem.Both Windows XP and Windows 7 laptops won't work.
View 11 Replies View RelatedCisco Firewall :: ASA 5505 / Site To Site VPN Using Public Addresses On Local Network
Jul 28, 2011I have a request to establish a site to site VPN with a customer. While collecting the information I give them our local network subnet which is a private subnet (192.168.5.0). They asked me if I could give them a public address instead. They can not work with the 192.168.5 subnet. Is this possible?
My side of the VPN is an ASA 5505 running 8.2(2). The other side i believe is a Checkpoint.
Cisco VPN :: Remote Client Cannot Connect To Local Network Or Site To Site ASA 5510
Jul 21, 2011I setup RA-VPN under local asa 5510 IP pool (192.168.127.0/24) and all was working fine. I got internet and local network access.
Then i have 5 site to site VPN working fine but when im traying to access to those L2L VPNs from the remote acces client im not able to do that. So after that i decided to obtain IP addresses from my DHCP server so i can obtain IPs from my local network (172.17.16.0/16) and then access normally to the VPN site to site. But the surprise was that the VPN cisco client is getting local IP address (172.17.16.222) perfectly but im not able to access even to my local network.
I have the same-security-traffic permit inter-interface same-security-traffic permit intra-interface enable.
Local Area Connection Connected But No Internet Access?
Jun 21, 2011I usually acess internet on Wi-Fi, and now I have travelled, and got my laptop with me. The internet here is Local Are Connection, the one with the cable, and it says I am connected, 100 Mbps, but no internet access! I can't browse or open anything that has to do with the internet... However, It works perfectly fine on EVERY other laptop. I've searched a lot of places and I've been told to write commands like ipconfig/ all andd netsh int ip reset.log but when I do that I get "The following command was not found : int ip reset.log" I set the properties in TCP/IP to Automatically detect settings .. but nothing.
View 14 Replies View RelatedLinksys Wireless Router :: WRT54G2 - Network Connected Device Only See Local Connection / No Internet
Sep 18, 2011I have a very annoying problem with my Linksys WRT54G2.When I connect a wireless device (laptop, phone, TV, Ipad) to my wireless network I only see a Local connection, no connection to internet. After resetting the router (power off for several seconds) the internet-connection is available again.I have to do this every 1 - 2 days.
View 7 Replies View RelatedServers :: Connect Internet But Not Local Server?
May 16, 2012My pc in the LAN can ping the local server but cannot connect ( cannot browse) it.Others in the LAN can connect it. I can also connect Internet but , not the local server. (when I type \192.168.... on my computer browser , answer " window cannot access \192.168.........)
View 11 Replies View RelatedConnect To Internet From Local Dns In Windows Server 2008?
Dec 15, 2012I build a local DNS for namming my local network on windows server 2008 , but due to setup local DNS ,when I want to connect to internet from my pc , I can't do it . because my DNS set with a local IP such as 192.168.1.10. What can I do that have an Internal DNS and can use internet with that too.
View 1 Replies View RelatedCisco VPN :: 5505 Is Connected Via A Site-to-Site Tunnel
Sep 30, 2012I've got a Cisco 5520, to which is a Cisco 5505 is connected via a Site to Site tunnel.The tunnel works just dandy, with traffic happily being passed to and from my Inside interface.
The issue comes with users connected to the 5505 access our DMZ, it simply refuses to work. I've read many posts about the changes made in 8.3 (which I'm running on the 5520) when it comes to NAT exemptions which I believe is the issue I'm having but I'm not able to implement any configuration to allow my site to site VPNs to connect to hosts within the DMZ.
An old copy of the configuration below (I tried many things after this point, but this is one of the cleaner copies!), [code]
Linksys Wireless Router :: Wrt54gs / Setup Local DNS Server To Manage Small Office Local-only Domain Names?
Apr 22, 2012i'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.
View 1 Replies View RelatedShare Point Server 2003 - Connecting Internet Site To Intranet?
Sep 7, 2011I have made a site on the internet and an intranet site made in share point server 2003. How can i connect link my internet site to my intranet site.
View 1 Replies View RelatedCisco VPN :: Site-to-Site VPN Between ASA 5505 And Windows Server 2008 R2
Apr 25, 2011Any experience setting up a site-to-site VPN between a ASA 5505 running 8.3 code and Windows Server 2008 R2?
View 1 Replies View RelatedServer 2003 R2 - Internet Disconnects When Its Connected
Sep 5, 2012I have a server 2003 r2 machine connected on a LAN.the server is used for data storage and the local workstations use the data on mapped drives.When the server is connected to the internet ... all of the workstations on the lan partially lose the internet.When i ping google while the server is connected to the internet I get 50% to 75% loss.When I disable the LAN adapter on sevrer- alll the workstations on lan have 0% loss.When I enable lan adapter on server and configure tcpip and for primary dns i enter 1.1.1.1 ,I still get 0% loss,when I enter 8.8.8.8 for primary dns the problem persists/It kind of sounds like a virus on server causing very heavy traffic?
View 3 Replies View RelatedCisco VPN :: Access Server From ASA 5510 Itself Through Site-to-site Vpn?
Feb 14, 2011I have problem with accessing servers through site-to-site vpn from ASA which makes this site-to-site vpn and has enablerd Clientless VPN.Reason why I need it / What I need to do:ASA 5510 has enabled Clientless VPN and on this portal is allowed users to go to URL of internal servers through bookmars. We are using it when somebody could not access IPSec VPN or is in internet cafe. So this user logs into clientless vpn and click on bookmark to access mail server for exmaple. But there is problem, asa cannot access this server through site-to-site VPN.
Network:Here is quick design of my network.I don't have problem access server in VLAN 159 from VLAN 10 or 100. But I need to be able access servers in Vlan 159 from ASA 5510 which has IP address 192.168.1.4.I have this subnet which ASA belongs in BEFORE-NAT object in same place as VLAN 10, 100 are and in Site-to-Site vpn profile.
Client Are Not Connected To Server / Computer Cannot Access Internet
Jul 18, 2011My network connection was vanish the client are not connected to server and the computer cannot access internet
View 1 Replies View RelatedWireless Internet Is Connected But Webpage Display No Server?
Apr 27, 2012I have netbook with win xp It is connected wirelessly to modem the internet was working until we upgraded the modem , now i see on the netbook that it is connected to internet but when i open internet page it dispays server not found I tried the answers posted to repair ip or winsock but it didn't work
View 20 Replies View RelatedCisco VPN :: Access From Local PIX 515 IP To Hosts On Site
Apr 7, 2013I have a site to site vpn connection between ASA 5510 and PIX 515 which is working fine. There is no problem for hosts on any side of the tunnel to access a cross. However the local ip (192.168.20.1) on the client interface of my PIX is not allowed to access hosts on the other side of the tunnel. [code]
View 2 Replies View RelatedCisco VPN :: 850 - Site To Site VPN - TMG Server At Hub
May 16, 2012i'm having trouble establishing a VPN between a TMG Server at our head office and a Cisco 850 series at the remote site, I'm new to Cisco products but I managed to setup an ADSL connection but now I need to setup a VPN connection to our head office Microsoft TMG gateway, I can't seem to get it to connect. I've installed the Cisco Configuration Professional tool to assist, it reports a mismatch between the router configurations.
I've included the running config of the cisco box and the config of the TMG server below, as I can't work out where the mismatch is.
the tunnel is supposed to be an Ipsec tunnel using a pre-shared key - I want to get this up and running before I worry about certificates.
Cisco 850 series running config
Current configuration : 7013 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption(code)
Cisco VPN :: 5520 VPN Filtering And Access From Local To Remote Site
Mar 21, 2012I have configured vpn filtering on all my l2l vpns. I have restricted access from remote to local resources only to specified ports. It works perfectly.But I want to have also full access from local to remote networks (but still preserve restricted access from remote to local). As I now VPN Filter works bi-directional with a single ACL. So is there some way to open all traffic from local to remote and still restrict remote to local traffic? ASA 5520 8.4(3)
View 4 Replies View RelatedCisco Wireless :: 5508 Remote Site Connection / Local Switching Is Disabled
Jan 14, 2013We have a 5508 controller in main site.Which has two ports connected to local network.Management VLAN 500 is untagged and mapped to Port 1.All other interfaces are including 501 to 507 are mapped to Port 2.We have a SSID that is mapped to VLAN 501 interface , which successfully can be joined in main site.We connect an AP to remote site ;We have a remote site VLAN 115 which can be reached from main site.We connect an AP to access vlan 115 port on the remote site , we had described option 43 , so AP can successfully finds controller in local mode.
AP gets ip from VLAN 115 , can setup connection / ping controller successfully.There is a wide area connection between remote and main site.No trunk setup , the whole remote site is vlan 115.However when the client is trying to connect the test SSID , client cant get connected nor get ip address.Local switching is disabled.For this setup , client comes to AP as a requested , AP tunnels traffic to controller from vlan 500 , controller lets the client get into wired platform from VLAN 501.
Cisco VPN :: 5510 Site-to-Site VPN Internet Access From Branch Office For Group
Mar 6, 2013Our Headquarter (asa 5510) is running a site to site vpn connection with a Branch office (router 2811). All remote users are accesing the internet through the VPN and also accesing headquarter file servers.I want to know if there is a way for some remote users to be able to use the vpn for accesing the file servers but to access the internet through the branch office. The rest of the remote users will be still accessing the internet through VPN.
View 2 Replies View RelatedCisco WAN :: 3825 Shared Internet Through Site To Site IPsec VPN Tunnel
Apr 24, 2013I have configured Ipsec vpn tunnel beetween two routers (from site A to site B) over untrusted internet connection by cisco 3825 routers and i can successfully access both of this routers. But now i need to access internet on site B router sitting on site A router. So that if i run traceroute from A site machine then the gateway by which internet passing through shows the ip of site B.
The Architecture of our both site routers :
Site A 10.1.11.0-----Router A 172.18.12.1-----VPN tunnel----Router B 172.18.12.2-----Site B 10.4.11.0
/////Create IKE policy
crypto isakmp policy 1
encr aes
authentication pre-share
group 2
[Code] .....
Cisco Routers :: RV220W Site To Site Vpn And Internet Access From Single Ip?
Dec 18, 2011Can I use a single Public IP address for both Internet access and site to site vpn access?If not, can I configure the RV220W as a bridge and still use it via another gateway configured for vpn passthrough as a VPN appliance/server on the LAN?
View 3 Replies View RelatedCisco WAN :: ASA 5512 Route Internet Via Site To Site VPN Interface
Jan 16, 2013How to route my internet traffice through the same interface where I have my site to site vpn configuried on.1) I'm using a ASA 5512 2) configuried a site to site VPN on g0/0 interface ( leased line with internet connect to the FW) 3) have a global IP assinged to the g0/0 ( site to site vpn established between two countries using global IP address at both ends ) ,4) security level 0 for g0/0 , LAN users inside( g0/1) security level 100 ,What i want to know is, how can i configure my LAN users to access internet via the g0/0 interface using the same global ip address assigned to it. not to route the internet through VPN,but i want to route it to my local ISP.
View 0 Replies View RelatedCisco WAN :: 3825 Internet Sharing By Ipsec Site To Site VPN
Apr 30, 2013My requirment is Clients from site A should access the Internet from site B (B will be providing internet to site A), So I have configured Ipsec vpn tunnel beetween two routers (from site A to site B) over untrusted internet connection by cisco 3825 routers and i can successfully access both of this routers.I have configured a client machine in site A and configured gateway of this client is 10.1.11.254 but dont have internet there.
View 2 Replies View RelatedCisco WAN :: 877 Is Site-to-Site VPN With Dynamic IP And Internet Browsing Possible On Same Router
Dec 12, 2010I have Cisco 877 routers, with ethernet (LAN) and ADSL (external) interfaces. The ADSL interface gets dynamic IP. Is Site to Site VPN with Dynamic IP and Internet Browsing Possible on the Same Router.
View 4 Replies View RelatedCan't Get Local Area Connection Connected With My Desktop
Aug 22, 2011I got a used computer from my relatives. When i enable my local area connection then it says aqcuiring ip adress for a while. Eventually it stops trying and says network cable unplugged. It worked fine at my relatives place, but not at my place.
View 14 Replies View Related
