Local Connection Only When Connected To Secured Wireless?
Mar 27, 2011
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows Vista Home Premium , Service Pack 2, 32 bit
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-58, x64 Family 15 Model 104 Stepping 2
Processor Count: 2
RAM: 1982 Mb
Graphics Card: NVIDIA GeForce 7000M / nForce 610M, 64 Mb
Hard Drives: C: Total - 140647 MB, Free - 62895 MB; D: Total - 11978 MB, Free - 1512 MB;
Motherboard: Quanta, 30EA, 86.09, None3
Antivirus: Webroot AntiVirus with Spy Sweeper, Updated and Enabled
Computer will connect to non secured WIXFDR-117 Clear wirless but when I set any authentication security types it only connects to the modemn and not to the internet.I get a Local connection only on the networking screen.I have tried WPA and WPA2 with TKIP and AES encryptions.It also will not connect using the ethernet cable on any settings.This computer did connect to a secured network though a 3 year version of netgear but I do not know the security settings.
View 8 Replies
ADVERTISEMENT
Sep 1, 2011
just got a new router/modem and found the network but can only get local connection no internet. Im running vista?
View 2 Replies
View Related
Sep 18, 2011
I have a very annoying problem with my Linksys WRT54G2.When I connect a wireless device (laptop, phone, TV, Ipad) to my wireless network I only see a Local connection, no connection to internet. After resetting the router (power off for several seconds) the internet-connection is available again.I have to do this every 1 - 2 days.
View 7 Replies
View Related
Aug 22, 2011
I got a used computer from my relatives. When i enable my local area connection then it says aqcuiring ip adress for a while. Eventually it stops trying and says network cable unplugged. It worked fine at my relatives place, but not at my place.
View 14 Replies
View Related
Jan 31, 2011
My computer is not connected to the local area connection.even though the network cable is plugin.
View 1 Replies
View Related
Jun 21, 2011
I usually acess internet on Wi-Fi, and now I have travelled, and got my laptop with me. The internet here is Local Are Connection, the one with the cable, and it says I am connected, 100 Mbps, but no internet access! I can't browse or open anything that has to do with the internet... However, It works perfectly fine on EVERY other laptop. I've searched a lot of places and I've been told to write commands like ipconfig/ all andd netsh int ip reset.log but when I do that I get "The following command was not found : int ip reset.log" I set the properties in TCP/IP to Automatically detect settings .. but nothing.
View 14 Replies
View Related
Apr 24, 2012
I have wireless connectivity, but my ethernet local area post will not work. Pinged 198.168.1.1 but got 4 timed out messages. Checked hardware condition and the controller card says it is functioning properly. Running Network Properties shows only the wireless connections, with Local Area Port disconnected.
View 16 Replies
View Related
Nov 9, 2012
i have a laptop and i don't have an internet in it so here are some wirelesses connections but all of them are sercured it asks me to enter the security key to access to the point so is there anyway to open it like to hack it without having to know the Password key?
View 1 Replies
View Related
Dec 19, 2011
Basically, her Windows (not sure which version) is telling her that to set up a secured connection, she needs to use a flash drive for some reason. She thinks she is able to get online right now, but only through an unsecured connection.
I don't think a flash drive is needed for this process, but as I am not even sure what this process is, I'm rather confused. What exactly is Windows asking of her right now? Her main thing is just to be able to connect to the Internet securely and easily.
View 6 Replies
View Related
Dec 19, 2011
Basically, her Windows (not sure which version) is telling her that to set up a secured connection, she needs to use a flash drive for some reason. She thinks she is able to get online right now, but only through an unsecured connection.
I don't think a flash drive is needed for this process, but as I am not even sure what this process is, What exactly is Windows asking of her right now? Her main thing is just to be able to connect to the Internet securely and easily.
View 9 Replies
View Related
Jun 14, 2012
Sometimes for a minute sometimes all day until I reset modem/router. It never says not connected though...it always says connected and excellent signal strength but when it won't access internet I can look at my modem/router and tell by the lights its not working even though it says connected. This time even though I reset everything like normal I still can't access internet. I thought it might have been my router so I went and bought a new one and still nothing. Doesn't work wireless or through local connection. Both say connected but nothing. When I do a diagnostic I get the DNS 0x2afc and HTTP 12007 errors. Both computers won't connect so I'm thinking it has to do with my actual router settings or modem.Both Windows XP and Windows 7 laptops won't work.
View 11 Replies
View Related
Dec 27, 2011
It says I'm connected, but when I try to get online, it says I'm on the local intranet and "THIS PAGE CANNOT BE DISPLAYED". How can I get it to the internet instead of local intranet?
View 3 Replies
View Related
Jul 18, 2012
This is the second time I have had this issue happen. Here is some probably useful information:
-I have (2) HP Pavillion dv6000 laptops running on Vista
-I have (1) iPad 2
-I am using a Belkin Surf N300 router
We lost power due to a storm last week, and both of my laptops would not connect to the Internet. I could connect to the router with access saying local only. I called Belkin and they changed some information on my laptop to allow me to connect. Now, I have the same issue with my other HP laptop and again called Belkin but they could not fix the issue. I can connect to the router and use the Internet on my iPad and (1) of my HP laptops, but not my last one. Even when I connect to the router with an Ethernet cable, it says local only access and no internet connection. So I did the ipconfig /all on both laptops and here is what they say..
Laptop that does NOT connect to Internet shows this:
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Melanie-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
View 6 Replies
View Related
Jan 8, 2013
Can't get access to the Internet. Says "server not found" on Firefox and IE doesn't work as well.Not a modem issue I don't think, all lights are working. Called my ISP they couldn't fix the issue.I pinged my IP address I get a response although I can't ping my DNS serverI am using my cellphone so I can't install any programs on my PC.Here is the details using ipconfig / all[CODE]
View 14 Replies
View Related
Feb 2, 2011
When i connect VPN in server site then I can't use my Local Internet connection?
View 1 Replies
View Related
Jun 8, 2012
I am on Windows Vista, attempting to share my laptop's internet connection (via 3G Huawei Dongle) with my iphone 4GS (via the laptop's wireless card). The iphone detects and connects to the laptop's ad-hoc connection fine, but when attempting to go online with safari, an alert message says that safari is not connected to the internet. From the Network and Sharing center, the ad-hoc connection's access is "local only". I have already enabled ICS on the dongled connection, so this shouldn't be the case.
View 6 Replies
View Related
Oct 27, 2011
I have an HP C7250 printer connected to our local network. Both my computer and the printer say it is online. The print que says it is off line. I can't print anything.
View 1 Replies
View Related
Jun 19, 2012
Server 2008 has two Nics one connected to outside switch and has internet, other Nic is connected to local siwtches which has 20 systems connected locally but does not have internet. Local systems were getting IP from server, but there was not internet on the lan systems, I restarted the server and local systems lost IP address. earlier everyting was fine.
View 2 Replies
View Related
Jan 18, 2013
I am trying to connect my 2800 Series CIsco Office router with VPN client software from home. I can successfully authenticate and get the IP address from the pool configured but couldnt ping any LAN Ips including default gateway. I am pasting my router's configuration.
IP Address Of LAN: 192.168.22.x/ 24
IP Addresses handed out to Clients: 10.10.10.5- 10.10.10.20
aaa new-model
!
!
aaa authentication login default local
[code]....
I have noticed that my virtual-access interface comes up but the line protocol of virtual-interface remains down as follows:
Virtual-Template100 x.x.x.x YES TFTP up down
Also The client PC picks up a random gateway of 10.10.10.1 which I never configured anywhere on the server.
View 26 Replies
View Related
Aug 9, 2011
My laptop (win7) can connect to wireless, but not Local Area Connection.This is the capture of my device manager, it reported that the driver of ip6 failure.but I do not think ip6 relates.I tried configuring a static IP address, reinstalling network driver, or disabling and enabling network cards.
View 11 Replies
View Related
Jul 23, 2011
I am trying to set up a wifi hotspot with my wireless adaptor. The connection between my ipod and the wireless adaptor in my computer seems to be working fine, but it doesn't connect further to the local area connection (ethernet).I tried to bridge the two networks but it doesn't work I get the error message "An unexpected error occurred while configuring the network bridge"[CODE]
View 4 Replies
View Related
Jan 4, 2011
MY laptop has a X in local area connection
View 2 Replies
View Related
May 12, 2011
my computer is custom made and it has been running just fine until recently. Usually when turn on my computer and login, my computer is connect to the internet. However recently I have not been able to connect with the local area connection and i'm currently on wireless connection. When i'm not using wireless my internet doesn't connect and I can't check my router by typing 192.168.1.1. I have a Linksys WRT54G and i'm using Vista SP2. I don't like using wireless at all and I want my connection to go back to normal[CODE]
View 9 Replies
View Related
Feb 15, 2012
I recently took my Dell Inspiron1545 out of sleep mode and my wireless internet connection no longer works.i have tried power cycling the 2-wire modem and the Cisco Valet router and resetting as well. I also have another laptop and xbox that use this network and are having NO issues in connecting and working perfectly fine.
The only device not working is the Dell laptop. I've tried removing the network profile, uninstalling the wifi driver and reinstalling after powercycling the computer and still nothing but limited connectivity only The WLAN utility has stated that the "Gateway IP Ping" has failed Now the laptop will connect to internet via LAN cable however will not to WiFi
I have attached the IPconfig spec sheet and hopefully somewhat can steer me in the right direction and get me back up an running.
Windows IP Configuration Host Name . . . . . . . . . . . . : Zee-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoWireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1397 WLAN Mini-Card Physical Address. . . . . . . . . : 00-22-5F-BF-40-AB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::8830:577f:a3fc:6333%15(Preferred)
[Code] ........
View 3 Replies
View Related
Jun 29, 2012
I just got a new HP EliteBook 8560w(Win7) but when I connect an Ethernet cable, the wireless becomes disabled. With my older Dell machines(WinXP) I could use both [DHCP for wireless and 192.168.1.x on the copper/Ethernet].Is there a way to prevent the wireless from being disabled?
View 2 Replies
View Related
Nov 7, 2011
I am having incredibly slow connection while transferring files using file sharing.I have the below hardware:
108Mbps TPLINK Wireless Router
TL-WR642G 108Mbps TPLINK Wireless Access Point acting as repeater
Laptops accessing internet and folder sharing enabled for local file transfer
Transfering of files excessively slow (after playing around with the settings was able to get 500KBps). I have set all wireless adapters on the laptops to 802.11g only.Tried setting the router and access point to both 54Mbps and 108Mbps 802.11G only as well as b/g.
View 1 Replies
View Related
Mar 5, 2011
I travel some for work. When not traveling my laptop connects directly to my company's intranet via a standard Ethernet connection.While on the road I use a wireless modem to pick up hotels wireless Internet. I connect and then log into a VPN to access my email and websites. This has always worked very easily incubus unsecure public routers.
However twice now , and both times on secure wireless I cannot even connect. My laptop easily finds the signal, usually really strong I click to connect and it never passes " validating identity". I know the secure routers password but it never even comes up to ask for it. Like I said it seems like it only happens on secure wireless routers. In this case it's frustrating because it's when I visit family and their home routers are set up secure with password.
View 4 Replies
View Related
Aug 9, 2012
the Xbox part was a windows thing. The router, modem, computer, and monitor, are all on one powerbar. I have used the used-to-be-wired computer (I needed the ethernet cord for something else, haven't gotten around to plugging it back in.) and the wireless laptop loses connection periodically. ALWAYS lose connection on bootup. and also when doing power consuming things. SO, I believe it is a lack of power being sent to the router. wired connections would use less, thats why they are still active, but I assume the wireless transmitter needs more energy in order to function properly. I haven't used the old computer in a awhile now, but I assume if I plug the router into another outlet/curcuit I the problem wouldnt occur. Might need someone wiht more knowledge to confirm this, but I'm fairly certain this was the cause.
View 3 Replies
View Related
Feb 21, 2011
I am unable to connect to wireless network in my office. the configuration and all worked out just fine and I was able to connect unsecured, however when we put a key on there, I am unable to connect. I am even able to connect to my neighbour's unsecured network and I can connect to our wireless router via Ethernet cable.
View 9 Replies
View Related
Oct 23, 2011
I recently bought a Netgear WNDR4000 router. The wired network is working fine, but the wireless network is giving me problems I don't understand.
I am using the following equipment to connect to the wireless network:
- Samsung Galaxy S2 mobilefoon (supports N speeds)
- Asus laptop (supports G speeds)
With both devices I want to connect to the 2.4 Ghz (b/g/n) wireless network with the following settings:
- Channel: auto
- Speed: 145 Mps max.
- Security: WPA2-PSK [AES]
- Preamble modus: long
- Fragmentation length: 2346
- CTS/RTS: 2347
Latest firmware has been installed.
Here is what happens:
- When resetting the router to factory settings I can connect with both devices mentioned (security is not enabled)
- When setting the WPA2 security key for the first time, I can connect with both devices.
- When I try to connect with either device for the second time I cannot connect, messages (from mobile phone):
The nework SSID is visible Trying to connect Connection broken Network remembered
And then a loop is present that keeps trying to connect, but almost never succeeds. Maybe once in a hundred attempts. When a connection is made, it works fine for as long as the connections stays present. After the connection is broken, it all starts over again. The 5 Ghz network is behaving exactly the same (only tested with my mobile phone, laptop doesn't support 5Ghz network).
I have lowered the speeds and tried different channels, but behavior stays the same.
View 1 Replies
View Related
Feb 8, 2011
How to verify router's wireless set up is secured ( and encrypted) from Admin GUI ?Which menu to look at in Admin GUI ?
View 3 Replies
View Related
Feb 7, 2013
I wounder if there is any way to ping the local deviceses connected to a network hosted by a Cisco 1921 router? I wan't to be able to ping the device(computer name) but currently cant do that.
View 1 Replies
View Related
Oct 14, 2012
show cdp neighbors command shows two devices connected through the same local port?I have a Cisco 3560 that when I issue the "show cdp neighbors" command I get the following results: [code]
the question is why is this showing that Gig0/3 is being used twice to connect to two different devices. I have verified there is no hub connected to this port and in fact Switch3 is not connected to Switch1 at all yet it still shows up in the CDP table.
I have cleared the CDP table on every device at this location and still get the same results.
View 4 Replies
View Related
