i have a laptop and i don't have an internet in it so here are some wirelesses connections but all of them are sercured it asks me to enter the security key to access to the point so is there anyway to open it like to hack it without having to know the Password key?
View 1 RepliesTech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows Vista Home Premium , Service Pack 2, 32 bit
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-58, x64 Family 15 Model 104 Stepping 2
Processor Count: 2
RAM: 1982 Mb
Graphics Card: NVIDIA GeForce 7000M / nForce 610M, 64 Mb
Hard Drives: C: Total - 140647 MB, Free - 62895 MB; D: Total - 11978 MB, Free - 1512 MB;
Motherboard: Quanta, 30EA, 86.09, None3
Antivirus: Webroot AntiVirus with Spy Sweeper, Updated and Enabled
Computer will connect to non secured WIXFDR-117 Clear wirless but when I set any authentication security types it only connects to the modemn and not to the internet.I get a Local connection only on the networking screen.I have tried WPA and WPA2 with TKIP and AES encryptions.It also will not connect using the ethernet cable on any settings.This computer did connect to a secured network though a 3 year version of netgear but I do not know the security settings.
I have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies View RelatedBasically, her Windows (not sure which version) is telling her that to set up a secured connection, she needs to use a flash drive for some reason. She thinks she is able to get online right now, but only through an unsecured connection.
I don't think a flash drive is needed for this process, but as I am not even sure what this process is, I'm rather confused. What exactly is Windows asking of her right now? Her main thing is just to be able to connect to the Internet securely and easily.
Basically, her Windows (not sure which version) is telling her that to set up a secured connection, she needs to use a flash drive for some reason. She thinks she is able to get online right now, but only through an unsecured connection.
I don't think a flash drive is needed for this process, but as I am not even sure what this process is, What exactly is Windows asking of her right now? Her main thing is just to be able to connect to the Internet securely and easily.
How to open port 443 on my wireless router model WRT54G3G-AT? For a secure business connection. Plese don't give me a link to follow, I've tried that one.
View 1 Replies View RelatedI travel some for work. When not traveling my laptop connects directly to my company's intranet via a standard Ethernet connection.While on the road I use a wireless modem to pick up hotels wireless Internet. I connect and then log into a VPN to access my email and websites. This has always worked very easily incubus unsecure public routers.
However twice now , and both times on secure wireless I cannot even connect. My laptop easily finds the signal, usually really strong I click to connect and it never passes " validating identity". I know the secure routers password but it never even comes up to ask for it. Like I said it seems like it only happens on secure wireless routers. In this case it's frustrating because it's when I visit family and their home routers are set up secure with password.
I am unable to connect to wireless network in my office. the configuration and all worked out just fine and I was able to connect unsecured, however when we put a key on there, I am unable to connect. I am even able to connect to my neighbour's unsecured network and I can connect to our wireless router via Ethernet cable.
View 9 Replies View RelatedI recently bought a Netgear WNDR4000 router. The wired network is working fine, but the wireless network is giving me problems I don't understand.
I am using the following equipment to connect to the wireless network:
- Samsung Galaxy S2 mobilefoon (supports N speeds)
- Asus laptop (supports G speeds)
With both devices I want to connect to the 2.4 Ghz (b/g/n) wireless network with the following settings:
- Channel: auto
- Speed: 145 Mps max.
- Security: WPA2-PSK [AES]
- Preamble modus: long
- Fragmentation length: 2346
- CTS/RTS: 2347
Latest firmware has been installed.
Here is what happens:
- When resetting the router to factory settings I can connect with both devices mentioned (security is not enabled)
- When setting the WPA2 security key for the first time, I can connect with both devices.
- When I try to connect with either device for the second time I cannot connect, messages (from mobile phone):
The nework SSID is visible Trying to connect Connection broken Network remembered
And then a loop is present that keeps trying to connect, but almost never succeeds. Maybe once in a hundred attempts. When a connection is made, it works fine for as long as the connections stays present. After the connection is broken, it all starts over again. The 5 Ghz network is behaving exactly the same (only tested with my mobile phone, laptop doesn't support 5Ghz network).
I have lowered the speeds and tried different channels, but behavior stays the same.
How to verify router's wireless set up is secured ( and encrypted) from Admin GUI ?Which menu to look at in Admin GUI ?
View 3 Replies View RelatedI have 3 desk tops and 1 Laptop. the desk tops are wireless connected via my Xfinity ( cable Modem) and a Trendnet 652- 300 mgb router setup. Recently installed the
Trendnet router ( initially w/o security). I was able to readily connect to and access all pcs to Internet. However, recently went to Trendnet on line site and installed Router password security. Was able to connect and access the Internet on 2 of the 3 desktop pcs as well as the Laptop. However, 1 desktop ( running on Windows XP Professional, 5.1.2600 SVCPK 3, Optiplex G x 60 ) does not permit access to Internet. Once I get to the screen asking for the password ( network key) , I insert same I receive an error message stating "Network key s/b WEP pr a WPA key".
I bought a used HP nc6000 and can't get it to connect to my secured account. The router I have is a Linksys E1000. I know my laptop has the wireless card and it's working because I can log into my "guest" account but of course that's unsecured and I don't want to be using it. Especially when we do purchasing over the internet. My laptop shows my secured account and when I try to connect it just says "waiting for the network" and then times out.I'm sure this is part of my problem and wnat to know if it can be fixed or not. The laptop shows WEP and the router is WPA or WPA2. Is there any way of making these work together.
View 2 Replies View RelatedI had been using my printer through my linksys router with no problem until I added a password to the linksys. Now I can't print. My computer says it can't "ping" the printer.
View 1 Replies View RelatedI can go to the public library and log on without a hitch, but at a coffee house or cafe I can not connect. Sometimes it says 'cannot validate..' and sometimes it just says 'unable to connect to wireless network' What gives?
View 3 Replies View Relatedwe purchased a new Toshiba laptop recently w/ win 7 OS and we cannot connect wireless to router using verified password. all other laptops, computers, LCD, etc. connect with no issue. we are using N response and WPA2 security settings. we have changed security from personal to auto with no success. we have also changed settings from tpik and aes - no success. we have verified the password several time to make sure and we also tried a friend's laptop running win 2000 OS and it connected perfectly with password. the strangest thing is that we managed to connect the new Toshiba wireless (secured) at our friend's house eliminating the thought of an issue with the laptop. we upgraded the firmware to the lastest version and that did not solve issue. the new laptop sees the network router and request password but, cannot authenticate to connect
View 8 Replies View RelatedI had an old G router that had an unsecured network. It died and I replaced it with an N router and installed a secured network. I have a cable modem with wires that goes to the router. From the router, I have CAT 4 wires going to several access points around the house. Into one of these acess points, I have pluged in a wireless access point that broadcasts wirelessly---unfortunately, it is broadcasting the old unsecured network. How can I make the wireless access point broadcast the new secured N network?
View 6 Replies View RelatedI have an odd problem where every fortnight to three weeks none of my wifi devices (ipap, laptop, 2x android phones) can connect to my network (Linksys E2000, running firmware 1.0.04 with WPA2 personal). They can all see the network and try and connect, but all fail. Rebooting the router has no effect, and the only thing I've found that works is that I have to connect via ethernet cable (which works no problems) and then disable wireless security, save changes, and then immediately reenable wireless security and save changes again. All my devices then will automatically reconnect no problems. It's a bit annoying as my router isn't ideally placed to dig out the cable, but I wondered if there's any way of diagnosing what could be wrong? I've checked the router logs and they're not useful - the only thing I can see of note is in the DHCP log in the period when I suspect the problem arose I get 4 entries of discover / offer / request / ack going to 255.255.255.255 which seems unusual. But the security log is empty so I get nothing from that.
View 8 Replies View RelatedI have a WTR160N-RM. I just moved and the cable technician hooked it up unsecured. I didn't catch it until he left. I can access the Linksys webite with the standard IP address and generic password, but I'm not sure what needs to be changed. I've looked at several UTube videos and read some online instructions, but they all different a bit. How I can secure my wireless again? I have an old Toshiba LT that just keeps on tickin'.
View 7 Replies View RelatedI have a Linksys E2500 router. Is it possible to have one network name for the secured network and a different network name for the Guest network? The thought is to not have the SSID of the secured network broadcast while allowing the SSID of the Guest network to be broadcast. With the convention of simply adding "Guest" to the end of the SSID for the secured network, it defeats the security option of not having the SSID of the secured network broadcast.
View 1 Replies View Relatedbought EA4500 router and successfully installed. The configuration of the desktop i use is - Windows 7 Home Premium SP 1, IE 9.0 and Chrome -23 Dual core Pentium, 2.5 GHZ, 2GB RAM Issue - Many websites, perticularly secured (HTTPS) are not opening up with new router. (Net banking, yahoo mail etc) I didn't face any issue with my old router which is WRT54GH, it is quite old router and did work excellent and working also. I had two calls with CISCO support team, they did check everything and came to conclusion that the issue is with router and asked to get it replaced. I did that but facing same issue. This time i connected my friends laptop to EA4500 along with my personal desktop. My company laptop has following configuration - Windows 7 Enterprise, IE 8.0 Dual core Pentium, 2.67 GHZ, 2GB RAM I tried yahoo mail, net banking websites on my desktop and friends laptop, these websites didn't open in my desktop but no issues faced on friend's laptop. I also noticed that cisco, apple sites are not opening on my desktop but no issue on friends laptop. I tried same thing with my old router WRT54GH, and all sites opened on both the PCs.
View 9 Replies View RelatedI have a Linksys Wireless G Model WRT54G2V1 using WEP encryption. I recently added a laptop. It can access various non-decured netowrks. It can see my home network but is unable to connect despite entering the correct passcode. how to get the laptop and secured network to communicate?
View 1 Replies View Related,I was having problems connecting to a network that is TKIP secured with a WMP11 Wireless PC card. I'm wondering if this is possible.
View 9 Replies View RelatedMy connection is modem to vonage adapter to wireless Time Capsule router. I get to the Internet with no problem, but my VoIP phone is not connected. I was told the ISP blocks VoIP. Now I'm using a VPN to be able to use Skype. Is there a way to override the blockage on the Vonage connection.
View 1 Replies View Relatedmy dial up connection isn't available on my cellphone's wlan
View 1 Replies View RelatedWhen I try to FTP into my server at home, which is running Filezilla server, and I try to connect via my Filezilla client, it gives me:"425 Can't open data connection.". I see this error on the client side and on the server side and on the client side, its not listing the directory.However, when I go and connect via SmartFTP, I sat on Google for about half an hour trying to find this problem out, went through the wiki, I know it isn't my router (I'm running pfSense). My NAT configs and firewall exceptions and port forwarding are all configured correctly. This just seems like a problem with Filezilla itself. The Filezilla Client can't connect to the Filezilla server but yet SmartFTP, as well as a friend of mine using FTPX can connect just fine.I can remote in via VNC, VPN in and contact my proxy server just fine from the outside.
View 4 Replies View RelatedI'm wondering if it's possible to setup SSL VPN connection via OPEN VPN client?I'm a Mac OS 1.7 user with Tunnelblick.
I tried to use "built-in" SSL VPN Tunnel client but unfortunately it's not working - during installation Java exception appears saying that either I don't have admin privileges or there is not enough space.. Of course I'm admin and there is plenty of space...
Regarding to subject above, I using Cisco 1921/K9 which I have bought from ECSM on 19-march 2012 currently facing a problem with the cisco. My problem is the I can’t browse most of the webpages and very slow browsing even I’m using Unifi 10mbps .
I couldn't open websites ex. msn.com / yahoo.com but if i bypass the cisco router there is no issue appear. I have checked the setup and there are no problem on the configuration or the Unifi line . I think it would be any hardware problem. I have attached the info of configuration the cisco .
how to open shared drives on server 2008 while connecting with vpn connection
View 1 Replies View RelatedF5D8233-4 using wide open west, losing internet for a few seconds during use, wow says it's firmware but the router says it's up to date.
View 3 Replies View Relatedi cant open my ports because i have a internet connection that first goes to my router and then to my modem.
View 3 Replies View RelatedHow do I go from a unsecured d-link to secured?
View 3 Replies View RelatedI was wondering; if I had a business and I wanted to privatize my email so that Me and my coworkers can email within the office so that our email won't get compromised, would I use outlook?
View 14 Replies View RelatedI cannot access my secured network b/c my pw doesn't work on laptop, although it does work on iPad. I get message that pw needs 40 or 104 bits104 bits
View 1 Replies View Related