D-Link DIR-655 :: How To Verify Router Wireless Set Up Is Secured
Feb 8, 2011How to verify router's wireless set up is secured ( and encrypted) from Admin GUI ?Which menu to look at in Admin GUI ?
View 3 Replies
ADVERTISEMENT
TP-Link 300Mbps Wireless :: TL-WR841ND - Failed To Verify Router Settings
Feb 2, 2013Region : United Kingdom
Model : TL-WR841ND
Hardware Version : Not Clear
Firmware Version : 7.1
ISP :
failed to verify router settings
What's wrong with my router?
D-Link DIR-655 :: Cannot Connect To Secured Wireless Using Correct Password
Jan 18, 2012we purchased a new Toshiba laptop recently w/ win 7 OS and we cannot connect wireless to router using verified password. all other laptops, computers, LCD, etc. connect with no issue. we are using N response and WPA2 security settings. we have changed security from personal to auto with no success. we have also changed settings from tpik and aes - no success. we have verified the password several time to make sure and we also tried a friend's laptop running win 2000 OS and it connected perfectly with password. the strangest thing is that we managed to connect the new Toshiba wireless (secured) at our friend's house eliminating the thought of an issue with the laptop. we upgraded the firmware to the lastest version and that did not solve issue. the new laptop sees the network router and request password but, cannot authenticate to connect
View 8 Replies View RelatedHow To Go From A Unsecured D-link To Secured
Jul 21, 2011How do I go from a unsecured d-link to secured?
View 3 Replies View RelatedCisco Switching/Routing :: 4900 - How To Verify Link Before VLAN Extension
Mar 23, 2012we got a dark fiber betwwen two sites away from each other 30 Km,i need to connect this sites acts as backup dc to main dc in main site using cisco 4900 Switches in BK-DC anf 6513 in the main site,how can i verfiy if this fiber oparates as L2 and i can extend vlan servers,is it via "sh cdp neigh" and "sh vlan br"?
View 2 Replies View RelatedD-Link DIR-655 :: Client Associated Twice Before Being Secured And Linked?
Aug 19, 2011I'm just wondering why my computer is being associated twice before being secured and linked when it obtains an IP address from the DIR 655 router. I am using the DWA-552 wireless card to connect to it. When I first started using them together, this wasn't happening. Then, all of a sudden, one day it just started showing "above message repeated 1 times" just below the log entry for the client being associated".
View 5 Replies View RelatedD-Link DIR-615 :: Cannot Get Wi-Fi On Secured Network To Work On IPod
Feb 3, 2012i can not get wi-fi on my secured network to work onvmy ipod, works w other devices
View 1 Replies View RelatedWireless Internet On Secured Router?
Mar 5, 2011I travel some for work. When not traveling my laptop connects directly to my company's intranet via a standard Ethernet connection.While on the road I use a wireless modem to pick up hotels wireless Internet. I connect and then log into a VPN to access my email and websites. This has always worked very easily incubus unsecure public routers.
However twice now , and both times on secure wireless I cannot even connect. My laptop easily finds the signal, usually really strong I click to connect and it never passes " validating identity". I know the secure routers password but it never even comes up to ask for it. Like I said it seems like it only happens on secure wireless routers. In this case it's frustrating because it's when I visit family and their home routers are set up secure with password.
Connecting Wireless Printer Through Secured Linksys Router?
Jun 21, 2011I had been using my printer through my linksys router with no problem until I added a password to the linksys. Now I can't print. My computer says it can't "ping" the printer.
View 1 Replies View RelatedLinksys Wireless Router :: Cannot Connect To Wpa Secured E2000 Wifi
Aug 20, 2012I have an odd problem where every fortnight to three weeks none of my wifi devices (ipap, laptop, 2x android phones) can connect to my network (Linksys E2000, running firmware 1.0.04 with WPA2 personal). They can all see the network and try and connect, but all fail. Rebooting the router has no effect, and the only thing I've found that works is that I have to connect via ethernet cable (which works no problems) and then disable wireless security, save changes, and then immediately reenable wireless security and save changes again. All my devices then will automatically reconnect no problems. It's a bit annoying as my router isn't ideally placed to dig out the cable, but I wondered if there's any way of diagnosing what could be wrong? I've checked the router logs and they're not useful - the only thing I can see of note is in the DHCP log in the period when I suspect the problem arose I get 4 entries of discover / offer / request / ack going to 255.255.255.255 which seems unusual. But the security log is empty so I get nothing from that.
View 8 Replies View RelatedLinksys Wireless Router :: WTR160N - Changing From Unsecured To Secured
Dec 13, 2012I have a WTR160N-RM. I just moved and the cable technician hooked it up unsecured. I didn't catch it until he left. I can access the Linksys webite with the standard IP address and generic password, but I'm not sure what needs to be changed. I've looked at several UTube videos and read some online instructions, but they all different a bit. How I can secure my wireless again? I have an old Toshiba LT that just keeps on tickin'.
View 7 Replies View RelatedLinksys Wireless Router :: E2500 - Different Names For Secured And Guest Network?
Mar 29, 2012I have a Linksys E2500 router. Is it possible to have one network name for the secured network and a different network name for the Guest network? The thought is to not have the SSID of the secured network broadcast while allowing the SSID of the Guest network to be broadcast. With the convention of simply adding "Guest" to the end of the SSID for the secured network, it defeats the security option of not having the SSID of the secured network broadcast.
View 1 Replies View RelatedLinksys Wireless Router :: Unique And Secured Https Are Not Opening Via EA4500
Nov 23, 2012bought EA4500 router and successfully installed. The configuration of the desktop i use is - Windows 7 Home Premium SP 1, IE 9.0 and Chrome -23 Dual core Pentium, 2.5 GHZ, 2GB RAM Issue - Many websites, perticularly secured (HTTPS) are not opening up with new router. (Net banking, yahoo mail etc) I didn't face any issue with my old router which is WRT54GH, it is quite old router and did work excellent and working also. I had two calls with CISCO support team, they did check everything and came to conclusion that the issue is with router and asked to get it replaced. I did that but facing same issue. This time i connected my friends laptop to EA4500 along with my personal desktop. My company laptop has following configuration - Windows 7 Enterprise, IE 8.0 Dual core Pentium, 2.67 GHZ, 2GB RAM I tried yahoo mail, net banking websites on my desktop and friends laptop, these websites didn't open in my desktop but no issues faced on friend's laptop. I also noticed that cisco, apple sites are not opening on my desktop but no issue on friends laptop. I tried same thing with my old router WRT54GH, and all sites opened on both the PCs.
View 9 Replies View RelatedLinksys Wireless Router :: WRT54G2V1 - Laptop Sees Secured Network But Unable To Connect?
Mar 11, 2012I have a Linksys Wireless G Model WRT54G2V1 using WEP encryption. I recently added a laptop. It can access various non-decured netowrks. It can see my home network but is unable to connect despite entering the correct passcode. how to get the laptop and secured network to communicate?
View 1 Replies View RelatedRouters / Switches :: Tplink Set Up Error - Failed To Verify Router Settings
Dec 18, 2011I've been trying to set up my TP-Link WR740N router but it always give the error "Failed to Verify router settings" on the last step of the set up screen. Broadband: Globe broadband (Wired)Modem: Siemen Gigaset SE260 I'm also confused on the 2nd Set up screen, it gives the option to select Dynamic IP Static IP PPoEI've tried using the Dynamic IP and PPoE but still getting the same error message
View 1 Replies View RelatedCisco Wireless :: To Verify Multicast With WLC 5508
Dec 25, 2012I used the wlc 5508 GUI to enable multicast in the CONTROLLER section, AP Multicast mode "Multicast" with a group address 239.1.1.1. Also in the "Multicast" section enabled Global Multicast Mode and IGMP Snooping.
My wired network is using a bsr and pim sparse-mode all around. My wlc is connected to a core 6513 L3 switch and on a neighbor L3 switch I can see a shared tree mroute entry and a source based entry for the wlc multicast group I created,
sh ip mroute
( *, 239.1.1.1 )
( 192.168.0.1, 239.1.1.1 )
I can't ping 239.1.1.1 though from anywhere, even the wlc's gui using the ping tool.I can do an ip igmp join on a loopback and ping from a neighbor device and get a reply.
In the monitor multicast section of the gui I can see some Layer2 MGID entries and one in the Layer3 MGID section but not for the 239.1.1.1 address.How do I verify my multicast over wireless setup is working correctly?
Does Router With Only Wired Connections Still Need To Be Secured
Dec 18, 2011I'm going to setup a wireless router but only run wired ethernet connections at first. whatever the walk through securing those connection are will not be a problem. however what about the wireless signal being broadcast from the antenna. any way to shut it down? is it necessary to secure that? I still need to keep others out of the network and stop others from using the connection.
View 1 Replies View RelatedUnplugged WRT54GS Router - Secured Network Is Still Broadcasting?
Jun 20, 2011I have a WRT54GS Linksys router. I have a personalized secured network (creags). My router is totally unplugged and disconnected, and I am still currently connected to my password protected network. Network authentication is set to WPA-PSK and Data encyription is set to TKIP. I cannot access my router's admin panel, even if I try 'admin' for just the password. I tried hard resetting my router (holding reset for >30sec, unplugging, plugging back in)-- nothing, and the network still shows up.
View 5 Replies View RelatedDlink Dir615 - Router Shows Up As Both Secured And Unsecured
Sep 25, 2011I'm running Windows 7 and have a dlink dir615 wireless router. I've had it for a year and never had this problem before. I changed the SSID to "router" and set a WPA encryption on the router's page. Now this SSID shows up and I can connect to it using the password I set, but it also shows up as a separate unencrypted connection under the default SSID "dlink".
How do I disable the unencrypted connection? I don't know why this is happening. I've set this up correctly a dozen times before.
Open A Secured Wireless Connection?
Nov 9, 2012i have a laptop and i don't have an internet in it so here are some wirelesses connections but all of them are sercured it asks me to enter the security key to access to the point so is there anyway to open it like to hack it without having to know the Password key?
View 1 Replies View RelatedUnable To Connect To Secured Wireless Network
Feb 21, 2011I am unable to connect to wireless network in my office. the configuration and all worked out just fine and I was able to connect unsecured, however when we put a key on there, I am unable to connect. I am even able to connect to my neighbour's unsecured network and I can connect to our wireless router via Ethernet cable.
View 9 Replies View RelatedLocal Connection Only When Connected To Secured Wireless?
Mar 27, 2011Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows Vista Home Premium , Service Pack 2, 32 bit
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-58, x64 Family 15 Model 104 Stepping 2
Processor Count: 2
RAM: 1982 Mb
Graphics Card: NVIDIA GeForce 7000M / nForce 610M, 64 Mb
Hard Drives: C: Total - 140647 MB, Free - 62895 MB; D: Total - 11978 MB, Free - 1512 MB;
Motherboard: Quanta, 30EA, 86.09, None3
Antivirus: Webroot AntiVirus with Spy Sweeper, Updated and Enabled
Computer will connect to non secured WIXFDR-117 Clear wirless but when I set any authentication security types it only connects to the modemn and not to the internet.I get a Local connection only on the networking screen.I have tried WPA and WPA2 with TKIP and AES encryptions.It also will not connect using the ethernet cable on any settings.This computer did connect to a secured network though a 3 year version of netgear but I do not know the security settings.
Netgear WNDR4000 Wireless Does Not Work When Secured
Oct 23, 2011I recently bought a Netgear WNDR4000 router. The wired network is working fine, but the wireless network is giving me problems I don't understand.
I am using the following equipment to connect to the wireless network:
- Samsung Galaxy S2 mobilefoon (supports N speeds)
- Asus laptop (supports G speeds)
With both devices I want to connect to the 2.4 Ghz (b/g/n) wireless network with the following settings:
- Channel: auto
- Speed: 145 Mps max.
- Security: WPA2-PSK [AES]
- Preamble modus: long
- Fragmentation length: 2346
- CTS/RTS: 2347
Latest firmware has been installed.
Here is what happens:
- When resetting the router to factory settings I can connect with both devices mentioned (security is not enabled)
- When setting the WPA2 security key for the first time, I can connect with both devices.
- When I try to connect with either device for the second time I cannot connect, messages (from mobile phone):
The nework SSID is visible Trying to connect Connection broken Network remembered
And then a loop is present that keeps trying to connect, but almost never succeeds. Maybe once in a hundred attempts. When a connection is made, it works fine for as long as the connections stays present. After the connection is broken, it all starts over again. The 5 Ghz network is behaving exactly the same (only tested with my mobile phone, laptop doesn't support 5Ghz network).
I have lowered the speeds and tried different channels, but behavior stays the same.
Netgear Router (DGN1000) Unable To Connect Wirelessly To Secured Or Unsecured Home Network
Feb 15, 2012I'll try and keep this brief, we were having problems with our netgear router (DGN1000) mainly with connection when online gaming with PS3, generally poor connection - so purchased a TP-Link router (TD-W8960N). We could usually access the netgear wirelessly on our laptops Dell and Acer Aspire 4820T (both Windows 7) without any problems and were still doing so last night. However hubby attempted to install the new router last night and all seemed to go fine but after installing we couldn't connect to the wireless network through laptops, iphone ps3 etc - even though we could see the network with excellent strength, after hours of trying called TP-Link they went through everything they could think of and still no joy. Gave up in the end and went to reinstall the netgear Router and now we have the same problem with this router, even though earlier in the night it wasn't a problem - we deleted the previous networks so there was nothing stored in memory & tried everything we can think of (although neither of us are brilliant with IT we do usually get by).We even set up an unsecured wireless network (on both routers) and still couldn't connect?
View 2 Replies View RelatedUnable To Access Internet Via Secured Wireless Setup
Apr 10, 2012I have 3 desk tops and 1 Laptop. the desk tops are wireless connected via my Xfinity ( cable Modem) and a Trendnet 652- 300 mgb router setup. Recently installed the
Trendnet router ( initially w/o security). I was able to readily connect to and access all pcs to Internet. However, recently went to Trendnet on line site and installed Router password security. Was able to connect and access the Internet on 2 of the 3 desktop pcs as well as the Laptop. However, 1 desktop ( running on Windows XP Professional, 5.1.2600 SVCPK 3, Optiplex G x 60 ) does not permit access to Internet. Once I get to the screen asking for the password ( network key) , I insert same I receive an error message stating "Network key s/b WEP pr a WPA key".
Wireless :: Can't Get HP Nc6000 Laptop To Connect To Secured Account
Mar 19, 2011I bought a used HP nc6000 and can't get it to connect to my secured account. The router I have is a Linksys E1000. I know my laptop has the wireless card and it's working because I can log into my "guest" account but of course that's unsecured and I don't want to be using it. Especially when we do purchasing over the internet. My laptop shows my secured account and when I try to connect it just says "waiting for the network" and then times out.I'm sure this is part of my problem and wnat to know if it can be fixed or not. The laptop shows WEP and the router is WPA or WPA2. Is there any way of making these work together.
View 2 Replies View RelatedWireless Won't Connect To Secured Network But Unsecured Is Fine
Feb 13, 2012I can go to the public library and log on without a hitch, but at a coffee house or cafe I can not connect. Sometimes it says 'cannot validate..' and sometimes it just says 'unable to connect to wireless network' What gives?
View 3 Replies View RelatedMake Wireless Access Point Broadcast New Secured N Network?
May 28, 2011I had an old G router that had an unsecured network. It died and I replaced it with an N router and installed a secured network. I have a cable modem with wires that goes to the router. From the router, I have CAT 4 wires going to several access points around the house. Into one of these acess points, I have pluged in a wireless access point that broadcasts wirelessly---unfortunately, it is broadcasting the old unsecured network. How can I make the wireless access point broadcast the new secured N network?
View 6 Replies View RelatedLinksys Access Point :: Connecting To Network That Is TKIP Secured With WMP11 Wireless PC Card
Nov 8, 2006,I was having problems connecting to a network that is TKIP secured with a WMP11 Wireless PC card. I'm wondering if this is possible.
View 9 Replies View RelatedCisco VPN :: Verify NAT On ASA 5510 Working?
Aug 16, 2011I'm working on setting up a site-to-site VPN connection that requires us to NAT an internal address. Typically, this would be no big deal, but for some reason, it's not working for us. The remote site is reporting that they are seeing the original IP address and not the mapped address coming across. I've monitored the connection and base on our ASA logs, I too see the un-mapped address.
Is there a quick and easy way of verifying that NAT is working? Logs, etc.?
Unfortunately I don't currently have the remote side's configuration, as they are an external business, but I can provide ours: [code]
Based on the above, it sounds as if our configs aren't jibing, which I would think could be caused by the NAT configuration not working, right? I mean if the VPN applicance on the remote end is expecting a NAT-ed address of 12.131.67.247 and they are receiving 12.10.127.108, that could cause this issue, couldn't it?
Servers :: Verify If Forwarded Email Is Real
May 24, 2012someone at work sent me an e-mail they claim was forwarded. I don't think it was, and I need to know before I ask, because accusing someone of making it look forwarded, I viewed the source code, but I can't tell, it was sent through a microsoft exchange server.I think they copied and pasted and changed dates, is there anyway to tell from the source code?
View 2 Replies View RelatedCisco Firewall :: How To Verify If CG-NMS Is Enabled On ASA5520
Apr 11, 2013how do I verify if CG-NMS is enabled on ASA5520. I just need to know if it's enable/install to be enabled and used?Cisco Adaptive Security Appliance Software Version 8.0(5)28..Device Manager Version 6.1(5)51
View 1 Replies View RelatedCisco :: Prime LMS 4.2 Command To Verify Installation
Feb 12, 2013I have installed Cisco Prime LMS 4.2 via OVA image with Linux Kernal. Is there any command or set of commands so that i can verfiy the installation are done correctly except show application.
View 1 Replies View Related