D-Link DIR-655 :: Client Associated Twice Before Being Secured And Linked?
Aug 19, 2011
I'm just wondering why my computer is being associated twice before being secured and linked when it obtains an IP address from the DIR 655 router. I am using the DWA-552 wireless card to connect to it. When I first started using them together, this wasn't happening. Then, all of a sudden, one day it just started showing "above message repeated 1 times" just below the log entry for the client being associated".
View 5 Replies
ADVERTISEMENT
Jan 5, 2011
My DIR-655:
Hardware Version: A4
Product Page: DIR-655
The problem is that Website Filer doesn't work if on STEP 3: SELECT MACHINE of Access Control the machine was selected by MAC address. When the machine was selected by IP everything is fine.The problem is that IP addresses are assigned dynamically, so how to make sure that the policy would be applied to the same machine?
View 8 Replies
View Related
Aug 29, 2011
I know there are a lot of threads out there regarding connection issues, both with wireless & LAN connections, after updating firmware to 1.35. To provide a snapshot of my setup...I have 3 GB switches throughout my home, a couple Ethernet enabled Blu-Ray players, 2 XBOX 360's, multiple satellite receivers with Ethernet, 5 PC's, 3 iphones, etc...you get the picture. I also have 5 older DLink wi-fi cameras. So, with this said my setup has been flawless for some time. However, a week or so ago I upgraded my firmware on my DIR-655 to the latest version...everything still seemed fine at the time. Yesterday I noticed we had no wireless internet so I went and checked. Sure enough...no connectivity on my desktop that's directly linked to the router, etc.
I tried rebooting & then resetting the router...got connectivity, but as soon as I plugged my PC into the switch...no IP address. I played around with settings, wiring configurations, etc...I'm pretty up to speed on this setup so I felt I exhausted every option. I thought my router went bad...gave me an excuse to go get the latest so I brought home a NetGear N750...hooked it up. As soon as I changed the LAN IP address range to condense the #of IP addresses I'm giving out again, the LAN connection to the PC was lost...I could not get it restored. I finally got it working, bypassing the GB switch, but the wireless would lose connection literally after a few seconds.
I ended up taking the NetGear router back and bought the exact same DIR-655, but this time it was HW version B1 instead of A and it was firmware #2.00 or something like that. I hooked it up when I got home...configured the system to exactly the way I had it before and PRESTO!!! My system is working like it was before. I can only think that the firmware upgrade I made on the previous router screwed something up in my system.
View 4 Replies
View Related
Jul 21, 2011
How do I go from a unsecured d-link to secured?
View 3 Replies
View Related
Feb 8, 2011
How to verify router's wireless set up is secured ( and encrypted) from Admin GUI ?Which menu to look at in Admin GUI ?
View 3 Replies
View Related
Feb 3, 2012
i can not get wi-fi on my secured network to work onvmy ipod, works w other devices
View 1 Replies
View Related
Jan 18, 2012
we purchased a new Toshiba laptop recently w/ win 7 OS and we cannot connect wireless to router using verified password. all other laptops, computers, LCD, etc. connect with no issue. we are using N response and WPA2 security settings. we have changed security from personal to auto with no success. we have also changed settings from tpik and aes - no success. we have verified the password several time to make sure and we also tried a friend's laptop running win 2000 OS and it connected perfectly with password. the strangest thing is that we managed to connect the new Toshiba wireless (secured) at our friend's house eliminating the thought of an issue with the laptop. we upgraded the firmware to the lastest version and that did not solve issue. the new laptop sees the network router and request password but, cannot authenticate to connect
View 8 Replies
View Related
Jan 5, 2011
I recently linked my dtv receiver to the internet through my laptop. My question is, since I'm now sharing the connection, do I need to make any adjustments in the "network and sharing center" to keep sensitive info on my laptop safe?I do have Norton Internet Security.
View 1 Replies
View Related
Aug 18, 2011
I have a Netgear Router connected by DSL to the Internet (through Roadrunner). I have a AT & T Microcell Tower and 2 computers connected to the Router: a desktop running Windows XP Home Edition wired to the Router and a laptop running Windows 7 connected to the router wirelessly. Both computers connect to the Internet without any problem. However, they do not communicate with each other. The laptop indicates a home network with all 3 devices, but cannot communicate with the desktop. The desktop does not show any network at all. It only indicates a connection through the Router.
View 1 Replies
View Related
Sep 28, 2012
Question: how would STP or RSTP behave in a star topology with a hub in the middle?i.e. you have four switches all linked to the same central hub. Single links, no loops.Each switch would then get BPDUs from everybody.Going by theory, it should be OK since it still sees the root's BPDU and will see the link to the hub as the root port, despite presence of other BPDUs from other switches? No different from receiving an inferior BPDU from an upstream switch and a superior BPDU from a further upstream root switch.I guess I could lab it by turning off spanning tree on a switch to simulate a hub? I've never previously had to deal with STP issues where there are hubs that aren't strictly point to point bridging so to speak (ok they're not bridging but you get the drift).I've got a scenario I'm examining at the moment where this is the topology, except all switches have bpdufilter running hence effectively no spanning tree. I'm curious to know what would happen should I remove the bpdufilter.I realise there is zero benefit in spanning tree in this instance as I don't have any redundant loops to fall back on, but I'm reluctant to turn off STP on those vlans (since obviously theres stuff behind those switches). The BPDUfilter method seems like an elegant solution but I wonder if its actually necessary.(the hub is actually a VPLS mesh, most sites terminate PE to CE router but I'm playing around with switches as the termination points – run our own Q in Q, split vlans off before it gets to layer 3 as separation, etc.)
View 1 Replies
View Related
Jun 21, 2012
I'm trying to use MRTG and SNMP on a Windows Serveur 2008R2.I want to manage my Switch with mrtg, but it don't show me which computers or server are connected to the Switch's ports.All I have, in the .cfg file is the interface name ( like S0/0 ), which are useless for me, I would like to get IP adresses or hostname but mrtg doesn't seems to do it.Any of you know if Mrtg can do that ? or maybe there are some others ways to do that ?
View 1 Replies
View Related
Aug 6, 2011
In my home I have a cable modem wired to a links wireless router a wrt 300n in my office (only hardwired used in there) and I do not get such good distance to my back bedrooms with my laptop. I have run a Ethernet cable dead center of the house for my sat receiver that is connected and wired to the 300wrt. Here is my question can I use the 150 like a hub or switch at the office connected to the cable modem and use the wrt300n router so that I get wireless on that side of the house. Or in reading here I see I can maybe use a bridge. I do have a older Linksys wrt150n sitting in a box.I have read until my eyes are almost bleeding and am not sure. How I can get a better signal on the other side of the house.
View 4 Replies
View Related
Feb 17, 2012
My desktop computer hangs when i use internet linked software like Mozilla and internet explorer. When i got hang i can't do anything but to press the restart on my CPU. But i can access only in Yahoo messenger and skype. It's really weird, I've been using it for a long time but i just only encountered it now. I tried to use my computer in safe mode with networking and it all worked! but why isn't it working in my normal mode. it's so hard
View 1 Replies
View Related
Dec 7, 2011
I am trying to get a C2960-8tc-L linked to a sge2000p via the Gbic ports using GLC-SX_MM gbics but having no luck.Are these compatible and should I need to configure anything?
View 1 Replies
View Related
Jan 31, 2013
There are a total of 7 systems on the network. The network has evolved from two small shops (3-4 computers each) to a single one with a sum total of 7 systems. Historically there were two ISP (which the new management would like to continue). Thus there are two NAT enabled devices at the last-mile from each ISP
Belkin F7D1301
Baton iBLR6111A
Networking is almost an unknown to me. An ip config on the computers in the network brought the realization there are 2 sub-nets ... at least it looks like there are 2 sub-nets (192.168.1.x, and 192.168.2.x).
My gut tells me the above mentioned modem/router cannot be connected & configured to be used transparently for the computers connected to the other modem/router without additional hardware. Is this right?
View 1 Replies
View Related
Mar 27, 2013
I faced with a strange behavior of ME3600.For testing purposes I linked Cat3550 and ME3600 switches via trunk mode. All interfaces are in Up state. But I couldn't ping SVI200 of Cat switch from ME3600 and vice versa. [cde]
This scheme perfectly works with another L3 swithes. For example Catalist3750. I know that ME doesn't support VTP, DTP and so on. Also, I've tried latest software.
View 0 Replies
View Related
Jan 11, 2011
I was wondering; if I had a business and I wanted to privatize my email so that Me and my coworkers can email within the office so that our email won't get compromised, would I use outlook?
View 14 Replies
View Related
Dec 25, 2011
I cannot access my secured network b/c my pw doesn't work on laptop, although it does work on iPad. I get message that pw needs 40 or 104 bits104 bits
View 1 Replies
View Related
Nov 9, 2012
i have a laptop and i don't have an internet in it so here are some wirelesses connections but all of them are sercured it asks me to enter the security key to access to the point so is there anyway to open it like to hack it without having to know the Password key?
View 1 Replies
View Related
Dec 18, 2011
I'm going to setup a wireless router but only run wired ethernet connections at first. whatever the walk through securing those connection are will not be a problem. however what about the wireless signal being broadcast from the antenna. any way to shut it down? is it necessary to secure that? I still need to keep others out of the network and stop others from using the connection.
View 1 Replies
View Related
Mar 5, 2011
I travel some for work. When not traveling my laptop connects directly to my company's intranet via a standard Ethernet connection.While on the road I use a wireless modem to pick up hotels wireless Internet. I connect and then log into a VPN to access my email and websites. This has always worked very easily incubus unsecure public routers.
However twice now , and both times on secure wireless I cannot even connect. My laptop easily finds the signal, usually really strong I click to connect and it never passes " validating identity". I know the secure routers password but it never even comes up to ask for it. Like I said it seems like it only happens on secure wireless routers. In this case it's frustrating because it's when I visit family and their home routers are set up secure with password.
View 4 Replies
View Related
Jun 12, 2011
i have moved my router to upstairs and want to make the computer downstairs wireless but it keeps asking for my encryption key or wapp?
View 2 Replies
View Related
Dec 13, 2011
I found two unknown computers on my network (using Explorer). I have a wireless setup at home (private) with a desktop (wired), two laptops and a phone (wireless).The encryption is WPA2/TKP with a hard to guess password. The two unknown computers were connected this morning and a few minutes after I tried to access them and do some checks,they disappeared could they have been watching me? I didn't check the router page until then and of course, they weren't there.Also, yesterday I was at a coffee place, so could it be that this is nothing and those two computers are from people at the cafe? Is there anything I can do to make sure nobody can access my network, unless it's the computers I want. I haven't manually set up a home network yet. [code]
View 4 Replies
View Related
Feb 21, 2011
I am unable to connect to wireless network in my office. the configuration and all worked out just fine and I was able to connect unsecured, however when we put a key on there, I am unable to connect. I am even able to connect to my neighbour's unsecured network and I can connect to our wireless router via Ethernet cable.
View 9 Replies
View Related
Dec 19, 2011
Basically, her Windows (not sure which version) is telling her that to set up a secured connection, she needs to use a flash drive for some reason. She thinks she is able to get online right now, but only through an unsecured connection.
I don't think a flash drive is needed for this process, but as I am not even sure what this process is, I'm rather confused. What exactly is Windows asking of her right now? Her main thing is just to be able to connect to the Internet securely and easily.
View 6 Replies
View Related
Dec 19, 2011
Basically, her Windows (not sure which version) is telling her that to set up a secured connection, she needs to use a flash drive for some reason. She thinks she is able to get online right now, but only through an unsecured connection.
I don't think a flash drive is needed for this process, but as I am not even sure what this process is, What exactly is Windows asking of her right now? Her main thing is just to be able to connect to the Internet securely and easily.
View 9 Replies
View Related
Nov 20, 2011
I have a linksys router and a time warner modem, we have not had any problems until the past month, and the problem gets worse every day. Our secure WAP2 comes unsecure and changes to the name "linksys". The connectivity has been 2 bars at best, and out lap tops, and iphones will not stay connected to wifi. occasoinally my iphone says it cannot find the network. this happened with our Iphone 3 and 3GS, and now our new 3GS and 4. all software on the computers and iphones is up to date, and we are one room away from the router and modem
View 2 Replies
View Related
Mar 27, 2011
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows Vista Home Premium , Service Pack 2, 32 bit
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-58, x64 Family 15 Model 104 Stepping 2
Processor Count: 2
RAM: 1982 Mb
Graphics Card: NVIDIA GeForce 7000M / nForce 610M, 64 Mb
Hard Drives: C: Total - 140647 MB, Free - 62895 MB; D: Total - 11978 MB, Free - 1512 MB;
Motherboard: Quanta, 30EA, 86.09, None3
Antivirus: Webroot AntiVirus with Spy Sweeper, Updated and Enabled
Computer will connect to non secured WIXFDR-117 Clear wirless but when I set any authentication security types it only connects to the modemn and not to the internet.I get a Local connection only on the networking screen.I have tried WPA and WPA2 with TKIP and AES encryptions.It also will not connect using the ethernet cable on any settings.This computer did connect to a secured network though a 3 year version of netgear but I do not know the security settings.
View 8 Replies
View Related
Oct 23, 2011
I recently bought a Netgear WNDR4000 router. The wired network is working fine, but the wireless network is giving me problems I don't understand.
I am using the following equipment to connect to the wireless network:
- Samsung Galaxy S2 mobilefoon (supports N speeds)
- Asus laptop (supports G speeds)
With both devices I want to connect to the 2.4 Ghz (b/g/n) wireless network with the following settings:
- Channel: auto
- Speed: 145 Mps max.
- Security: WPA2-PSK [AES]
- Preamble modus: long
- Fragmentation length: 2346
- CTS/RTS: 2347
Latest firmware has been installed.
Here is what happens:
- When resetting the router to factory settings I can connect with both devices mentioned (security is not enabled)
- When setting the WPA2 security key for the first time, I can connect with both devices.
- When I try to connect with either device for the second time I cannot connect, messages (from mobile phone):
The nework SSID is visible Trying to connect Connection broken Network remembered
And then a loop is present that keeps trying to connect, but almost never succeeds. Maybe once in a hundred attempts. When a connection is made, it works fine for as long as the connections stays present. After the connection is broken, it all starts over again. The 5 Ghz network is behaving exactly the same (only tested with my mobile phone, laptop doesn't support 5Ghz network).
I have lowered the speeds and tried different channels, but behavior stays the same.
View 1 Replies
View Related
May 31, 2011
I have an operating router with no problems, but I need a secure network.on setting a password for my TP-Link model TL-WR941ND router
View 3 Replies
View Related
Apr 10, 2012
I have 3 desk tops and 1 Laptop. the desk tops are wireless connected via my Xfinity ( cable Modem) and a Trendnet 652- 300 mgb router setup. Recently installed the
Trendnet router ( initially w/o security). I was able to readily connect to and access all pcs to Internet. However, recently went to Trendnet on line site and installed Router password security. Was able to connect and access the Internet on 2 of the 3 desktop pcs as well as the Laptop. However, 1 desktop ( running on Windows XP Professional, 5.1.2600 SVCPK 3, Optiplex G x 60 ) does not permit access to Internet. Once I get to the screen asking for the password ( network key) , I insert same I receive an error message stating "Network key s/b WEP pr a WPA key".
View 4 Replies
View Related
Jun 20, 2011
I have a WRT54GS Linksys router. I have a personalized secured network (creags). My router is totally unplugged and disconnected, and I am still currently connected to my password protected network. Network authentication is set to WPA-PSK and Data encyription is set to TKIP. I cannot access my router's admin panel, even if I try 'admin' for just the password. I tried hard resetting my router (holding reset for >30sec, unplugging, plugging back in)-- nothing, and the network still shows up.
View 5 Replies
View Related
Mar 19, 2011
I bought a used HP nc6000 and can't get it to connect to my secured account. The router I have is a Linksys E1000. I know my laptop has the wireless card and it's working because I can log into my "guest" account but of course that's unsecured and I don't want to be using it. Especially when we do purchasing over the internet. My laptop shows my secured account and when I try to connect it just says "waiting for the network" and then times out.I'm sure this is part of my problem and wnat to know if it can be fixed or not. The laptop shows WEP and the router is WPA or WPA2. Is there any way of making these work together.
View 2 Replies
View Related
