Windows Wants Flash Drive To Set Up Secured Connection?
Dec 19, 2011
Basically, her Windows (not sure which version) is telling her that to set up a secured connection, she needs to use a flash drive for some reason. She thinks she is able to get online right now, but only through an unsecured connection.
I don't think a flash drive is needed for this process, but as I am not even sure what this process is, What exactly is Windows asking of her right now? Her main thing is just to be able to connect to the Internet securely and easily.
View 9 Replies
ADVERTISEMENT
Dec 19, 2011
Basically, her Windows (not sure which version) is telling her that to set up a secured connection, she needs to use a flash drive for some reason. She thinks she is able to get online right now, but only through an unsecured connection.
I don't think a flash drive is needed for this process, but as I am not even sure what this process is, I'm rather confused. What exactly is Windows asking of her right now? Her main thing is just to be able to connect to the Internet securely and easily.
View 6 Replies
View Related
Jul 25, 2011
My router does not have a usb port. So what now?
View 1 Replies
View Related
Aug 24, 2011
A visitor wants to use his laptop but I don't know the security code to get his computer to operate on my network. How do find that code and put it on my flash drive??
View 2 Replies
View Related
Oct 6, 2010
I'm having an issue with a Cisco 2811 ISR Router. Sh ver command output lists the correct ios that the router used for booting and it says that the ios is stored in flash but when i give "sh flash" command it doesn't display the ios file. Maybe the flash is corrupted or damaged in some way? In the attached file is the output from the "sh ver" and "sh flash" commands.
View 6 Replies
View Related
Jul 7, 2011
How do I save/copy all of the router configuration entries onto a memory/flash usb drive? I did not configure the router myself (out of town when purchased). I have already downloaded the manual for that router and I want to understand exactly what she (person who configured router) did and identify any mistakes she might have made. Once downloaded, I assume I can print out all configuration settings.
View 3 Replies
View Related
Nov 9, 2012
i have a laptop and i don't have an internet in it so here are some wirelesses connections but all of them are sercured it asks me to enter the security key to access to the point so is there anyway to open it like to hack it without having to know the Password key?
View 1 Replies
View Related
Mar 27, 2011
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows Vista Home Premium , Service Pack 2, 32 bit
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-58, x64 Family 15 Model 104 Stepping 2
Processor Count: 2
RAM: 1982 Mb
Graphics Card: NVIDIA GeForce 7000M / nForce 610M, 64 Mb
Hard Drives: C: Total - 140647 MB, Free - 62895 MB; D: Total - 11978 MB, Free - 1512 MB;
Motherboard: Quanta, 30EA, 86.09, None3
Antivirus: Webroot AntiVirus with Spy Sweeper, Updated and Enabled
Computer will connect to non secured WIXFDR-117 Clear wirless but when I set any authentication security types it only connects to the modemn and not to the internet.I get a Local connection only on the networking screen.I have tried WPA and WPA2 with TKIP and AES encryptions.It also will not connect using the ethernet cable on any settings.This computer did connect to a secured network though a 3 year version of netgear but I do not know the security settings.
View 8 Replies
View Related
Feb 26, 2012
Trying to copy the system image file from the sup-bootflash to a new 64MB ATA flash card. Yes the software can support the 64MB card.
The ATA flash card was formated successfully, however I cannot copy the system image to it so that it can boot after a power loss.
The command I tried was: console(enabled) copy sup-bootflash: slot0:
The source filename was typed in as shown in the Show Verison command.The result was: Error opening slot0: no such device.I suspect that I am missing something obvious as I am new to Cisco Switches.
View 1 Replies
View Related
Aug 31, 2012
I can not access shared windows 7 c drive in windows xp. how can i view these system
View 3 Replies
View Related
May 20, 2011
step by step procedure how to map windows drive in ubuntu 8.04
View 1 Replies
View Related
Dec 18, 2012
I recently bought my book live 3TB everything works well with it, I can stream movies upload them, remote access and much more with a good speed, the problem is when I direct connect my book live to my PC via Ethernet, windows can't find the path of the drive. However, I tried to direct connect via Macbook and it works with no problem.I tried to fast reset my book live to factory default settings and direct connect from my book live to my PC via Ethernet, simply it worked! But then it stopped working for some unknown reason.Its a pain when i need to transfer large files via wireless.
View 4 Replies
View Related
Jun 1, 2011
I am trying to attach a share drive from a samba server to a windows 7 client.
View 1 Replies
View Related
Jul 3, 2012
I have a desktop PC hooked up to an ethernet cable. I was surfing the web one day when the internet cut out and I haven't been able to get it back since. This was in Windows 7. I have two hard drives. The first has Windows 7 on it, and the second has Windows XP on it. When I load up the Windows XP drive, the internet works great. But, when I start the 7 drive, there's no possible way to connect to the internet. I don't understand it. I have the ethernet cable [that is usually in the PC] plugged into my laptop (running WINDOWS 7 of all things). I'm typing this from the laptop, and the internet works perfectly on it. I don't know what to do about this. I'll provide any more info needed.
View 1 Replies
View Related
Jul 7, 2012
I have never had to share an Ubuntu drive to windows before, and I never thought it would end up being this difficult. What I need to do is share my 500gb drive in ubuntu, it is a secondary drive, not the primary with the OS on it, to my windows xp and my windows 7 machines. So far I have samba installed on the ubuntu machine and I have formatted and set everything up. The issue is that I just cant figure out how to connect to it in windows becuase when i use the map network drive feature it says something about no network found.
View 1 Replies
View Related
Dec 30, 2012
Is there a way of sharing a hard drive between two windows 7 PCs without having to set up a workgroup, homegroup or password etc.
View 1 Replies
View Related
Sep 20, 2011
I have a red x in "My Computer" at the network drive. cannot connect to it. what do you suggest. I am on a pere tp pere network
View 1 Replies
View Related
Aug 8, 2011
At work we have a private network set up so that any computer that is plugged into the wall is on the same network. (i.e. all ip addresses are identical except for the last block of numbers)All machines are running WinXP.We have one computer set up as a file server (computer with shared folders) that is plugged into a wall socket. We have 3 other machines that can see and access the shared folder on the server computer once they are plugged into a wall socket. The odd thing is that these 3 machines have different settings as far as I can tell. They are all on different workgroups but they have no problem finding the shared folder.However, when I go to plug my laptop into a wall socket, I am not able to map a network drive. The error msg says it cannot find the drive. I have my laptop set-up on the same workgroup as the server computer and the server computer can see my laptop. But when I double click on my laptop in the server computer workgroup I get a msg saying permission is denied.
My laptop can connect to the internet, but cannot find the shared drive. I have tried turning off my laptop firewall, the server firewall, both firewalls etc with no success. In my Local Area Connections I have the following all enabled "Client for Microsoft Networks", "File and Printer Sharing for Microsoft Networks", "QoS Packet Scheduler", "Internet Protocol (TCP/IP)".
View 5 Replies
View Related
Jun 7, 2011
I want to share any folder or drive only one user amongst 20 at windows xp.How?
View 1 Replies
View Related
Mar 26, 2012
I have a domain with a domain controller Server 2003. I have a backup dc running an application with server 2008. The shared folder I am trying to access is on an nt server 2000. We have had a mapped drive "I:" and have used it for years. Our copier also scans to a shared folder on the server 2000 machine. All of the desktop systems are xp sp3 with one W7 machine. A couple of weeks ago when user attempted to access the shared/mapped drive, an error would occur that "the drive was in use and they could not be logged on". Sometimes the error would say "you don't have permission to access the drive." Mind you no settings have been changed on the network. When either of these errors would occur it would occur for everyone but if I rebooted the server everyone could connect again. The same errors would occur the next day or 6 - 8 hour later. Now the error has occured "Drive is already in use and you cannot be logged in" (I have tried drive Z as well the drive is not in use) and restarting the serever no longer works. No one can access the shared drive. I have unmapped the drive on my system and have attempted to reconnect, I enter the path and check reconnect at logon and it asks for a password. I enter the administrator password (which is what I always used) and it just pops right back up asking for a password as if I entered nothing. I can ping the server with the shared folder and even logon remotely so I know it is not a physical disconnect. I am not sure what changed and have followed many suggestions found to no avail. We cannot access the shares or scan.
View 1 Replies
View Related
Mar 23, 2013
I've setup a home network using Netgear N300 wireless router (using Windows 7).
I'm trying to get one of my hard drives to be available on the network, so I went to the "sharing" tab of the HD's properties setting and allowed sharing on the HD and turned off password protection so that you don't need a password to access the HD.I also set the permissions to give full control, change, and read access to the "Everyone" group.
From another computer in the network, I tried connecting to the network HD but ultimately got "Access denied" despite the fact that I gave full control to "Everyone".How do I get the computer to be able to connect to the shared HD?
View 2 Replies
View Related
Oct 25, 2011
i need software drive linksys wmp54g for windows 2008 server
View 2 Replies
View Related
Apr 5, 2013
I'm runing an ea3500 in bridged mode, classic configuration, firmware 1.0.30 build 126544. I got ftp working for my usb attached wv delements drive , but it is totally invisible in windows (except for ftp of course).I read in an older post that the usb drive in certain situations does not work (independent of disk manufacturer/type and such) and for certain configurations the ftp option might work but the windows mapped network drive doesn't , does that still apply? does it apply to bridged mode ?
View 1 Replies
View Related
Jan 21, 2011
I have a router with a motorola cable modem connected to my linksys router. In this network I have a windows XP computer wirelessly connected to the router and a networked disk drive wired to the router through a netgear switch.I am trying to move a lot of files from the XP computer to the networked drive.Everything works great as it will move files for as long as everything is up and running. As soon as I attempt to change the status of the modem from on-line to off-line with the push button on top of the modem, my XP computer loses connection to the networked drive.Why is this happening? I would think the xp computer and network drive are below the modem inside the network so losing the internet connection from the modem should only affect the internet connection
View 1 Replies
View Related
Dec 12, 2011
I have an Asus laptop that is about 6 months old. My husband has a MAC. Both computers are located in the living room and the wireless external drive is located in the office along with our wireless router and printer. I have no issues connecting to the router or printer, however it is extremely slow when I connect to the external drive if I can even get it to connect. My husband has no issues connecting to the external drive. I don't understand.
View 2 Replies
View Related
Jan 4, 2011
My problem: Shared network drive (folder), when accessed over wireless from more than 1 PC (2 or 3) simultaneously, drops everywhere with a "The specified network name is no longer available" (in Windows Explorer), or "File cannot be read" (in a program). And I don't mean accessing the same file; yes, the files I've tried with are in the same folder, but when the connection is lost a)one client is streaming video from one file and b)another client is copying over some other file to the same folder. It even happens, for example, when one client is transferring a file, and another tries to list the folder. The connection for the file transfer is immediately lost.
My setup: Home network. 4 clients (3 laptops - 2 running XP and one running windows 7, and a desktop, running windows XP). 1 server, running windows server 2003 Enterprise Edition, 2Gb RAM, 2.66 Celeron CPU, and with a 1.3 TB Shared drive partition. The idea is to use the server as a NAS. The desktop and the server are connected via 100MBit UTP/Ethernet, to a DLINK DI-604 Router (WAN port of the router used for Internet). To another one of the LAN ports is connected a Wireless router, NETGEAR WGT624 v3. Wireless connection for the laptops is established at 54 Mbits. The share is mainly used for movies and music sharing between the PCs. When using the shared drive from the desktop (or if I use a LAN cable to plug directly to the DI) I have zero connection problems. For the wireless, however, as I mentioned before, the second I do two twings on two different machines that are connected over wireless simultaneously (and I've tried *all* combinations) the connection is lost for 5 seconds, which is not significant, but enough to be annoying if watching a movie or trying to use the "robust" file transfer of Windows.
What I've tried so far: Perfmon was showing that Page Reads were high, so I upgraded the RAM TO 2Gb(previously the server had only 1Gb or RAM). I tried having each client map the drive using its own account, that did not work either. I've been dealing with shared drives a lot (on win 2000-win 2008 servers), but not nearly as bad of behavior. Worst I've had is having to remap the drives every once in a while if not used or a client gets restarted and loses the mapping. However, I've dealt primarily with sharing over Ethernet, and not WiFi. I'm not a rookie by any means (I've covered CCNA and have done quite a bit of sys admin work as a hobby) I've done all of the basic troubleshooting, the problem is very specific and not a general networking problem by any means.
View 3 Replies
View Related
Jun 22, 2011
User has a laptop, takes home and uses in office.Running Windows XP. Once he comes in the office, tries to retrieve a file from his network drive connection, the laptop loses the drive connection.It will restore only if I reboot just to drop shortly after.
View 1 Replies
View Related
Jan 12, 2011
I am using Win 7 Pro x32. When I use RDP to connect to another computer, I noticed that on the remote computer (sometimes) as well as on my local machine (always), it creates a "Z:" drive. It isn't like a mapped network drive though, it shows under Hard Disk Drives. The free space is the same as the C: drive. When you open it, it is the %TEMP% folder on my machine. Going to the run command and typing %TEMP% will show you the same contents as the Z: drive. When I close the RD Connection, the Z drive goes away. I have no clue what is causing this and I did a little searching and couldn't find anything that resembled anything close to this online. I saw the same thing happen on a Win XP machine earlier as well.
View 1 Replies
View Related
Mar 17, 2011
My WLSE 1030 hard drive failed and I have replaced it with a new drive but when I boot from the 2.15 recovery CD the disc boots and runs, within the console connection I get the error "ERROR: version information not found in flash" the disc is the ejected and the system reboots.How can I reload the system software.
View 3 Replies
View Related
Mar 19, 2012
I'm currently in college, and do most things with my laptop, and I have wifi just about everywhere. It has a generous 500 GB of storage, but I'd like to store non-essential files on, an external hard drive. However, lugging around 3 TB of storage isn't exactly feasible, and with my experience with my current 1.5 TB portable drive, me running around everywhere with it bouncing in my bag is just going to abuse it until it stops functioning (which it has...)[URL]
View 3 Replies
View Related
Feb 23, 2012
I recently purchased a Linksys e3000 router. Everything is going great except that both my desktop (Windows 7 Machine) and Laptop (Macbook Pro) keep losing the connection to a DLINK 323 Nas drive I have plugged into the router. This is problematic because I keep my itunes library on the NAS drive.
View 1 Replies
View Related
Sep 15, 2010
I recently purchased a Linksys e3000 router. Everything is going great except that both my desktop (Windows 7 Machine) and Laptop (Macbook Pro) keep losing the connection to a DLINK 323 Nas drive I have plugged into the router. This is problematic because I keep my itunes library on the NAS drive.
View 2 Replies
View Related
Sep 15, 2011
I'm trying to share my drive thats on my desktop PC to my Netbook. But I want it to show up on my netbook like a local disk drive. Is this possible? Would I need a software for this and if so which one?
View 1 Replies
View Related
