Windows 7 C Drive Is Not Accessible In XP?
Aug 31, 2012I can not access shared windows 7 c drive in windows xp. how can i view these system
View 3 Replies
ADVERTISEMENT
Sharing :: Mapped Drive On Windows NT 2000 Server Not Accessible?
Mar 26, 2012I have a domain with a domain controller Server 2003. I have a backup dc running an application with server 2008. The shared folder I am trying to access is on an nt server 2000. We have had a mapped drive "I:" and have used it for years. Our copier also scans to a shared folder on the server 2000 machine. All of the desktop systems are xp sp3 with one W7 machine. A couple of weeks ago when user attempted to access the shared/mapped drive, an error would occur that "the drive was in use and they could not be logged on". Sometimes the error would say "you don't have permission to access the drive." Mind you no settings have been changed on the network. When either of these errors would occur it would occur for everyone but if I rebooted the server everyone could connect again. The same errors would occur the next day or 6 - 8 hour later. Now the error has occured "Drive is already in use and you cannot be logged in" (I have tried drive Z as well the drive is not in use) and restarting the serever no longer works. No one can access the shared drive. I have unmapped the drive on my system and have attempted to reconnect, I enter the path and check reconnect at logon and it asks for a password. I enter the administrator password (which is what I always used) and it just pops right back up asking for a password as if I entered nothing. I can ping the server with the shared folder and even logon remotely so I know it is not a physical disconnect. I am not sure what changed and have followed many suggestions found to no avail. We cannot access the shares or scan.
View 1 Replies View RelatedServers :: Mapped Drive Is Not Accessible Sometimes
Dec 5, 2012i have shared 4 network drive in my client computer but sometime when we leave computer on for a couple of hours and then try to access the drives then it shows the message "network drive is not available" the only way to access the drive is to restart computer.
View 1 Replies View RelatedNetwork Drive Not Accessible If Antivirus Avg Installed?
Jun 20, 2012My network drive is not working if i install antivirus. It shows 'access denied". if I uninstall, i can access the network drive.
View 3 Replies View RelatedWindows 7 Can't Receive Internet Network Traffic - Gateway Accessible
Aug 18, 2012I just got my dad's old notebook (VAIO VPC F223FB) which is better than my older one. So, I did a backup and then managed to clean install a Windows 7 Professional x64.At first I had a problem with the drivers, because the internet wasn't connecting and the USB ports weren't detecting my External Drive. So, I tested other USB port and got it. Installed the drivers and I could connect to the wireless network. But it doesn't detect the ethernet cable! And I want it detecting because then it's faster. I already tried downloading the Ethernet Controller driver. At first, I downloaded through Sony's support site but it didn't recognize the driver. Now, it recognizes but still doesn't connect it. And when I tried Solving Connection Problems, it said the network gateway was accessible but Windows can't receive Internet network traffic.
View 5 Replies View RelatedHow To Map Windows Drive In Ubuntu
May 20, 2011step by step procedure how to map windows drive in ubuntu 8.04
View 1 Replies View RelatedWindows Can't Find Path Of Drive
Dec 18, 2012I recently bought my book live 3TB everything works well with it, I can stream movies upload them, remote access and much more with a good speed, the problem is when I direct connect my book live to my PC via Ethernet, windows can't find the path of the drive. However, I tried to direct connect via Macbook and it works with no problem.I tried to fast reset my book live to factory default settings and direct connect from my book live to my PC via Ethernet, simply it worked! But then it stopped working for some unknown reason.Its a pain when i need to transfer large files via wireless.
View 4 Replies View RelatedWindows 7 Cannot Connect To Network Drive
Jun 1, 2011I am trying to attach a share drive from a samba server to a windows 7 client.
View 1 Replies View RelatedCan't Connect To Internet On Windows 7 Drive - Only On XP
Jul 3, 2012I have a desktop PC hooked up to an ethernet cable. I was surfing the web one day when the internet cut out and I haven't been able to get it back since. This was in Windows 7. I have two hard drives. The first has Windows 7 on it, and the second has Windows XP on it. When I load up the Windows XP drive, the internet works great. But, when I start the 7 drive, there's no possible way to connect to the internet. I don't understand it. I have the ethernet cable [that is usually in the PC] plugged into my laptop (running WINDOWS 7 of all things). I'm typing this from the laptop, and the internet works perfectly on it. I don't know what to do about this. I'll provide any more info needed.
View 1 Replies View RelatedMapping A Shared Ubuntu Drive In Windows 7?
Jul 7, 2012I have never had to share an Ubuntu drive to windows before, and I never thought it would end up being this difficult. What I need to do is share my 500gb drive in ubuntu, it is a secondary drive, not the primary with the OS on it, to my windows xp and my windows 7 machines. So far I have samba installed on the ubuntu machine and I have formatted and set everything up. The issue is that I just cant figure out how to connect to it in windows becuase when i use the map network drive feature it says something about no network found.
View 1 Replies View RelatedSharing A Hard Drive Between Two Windows 7 PCs Without Having To Set Up Workgroup?
Dec 30, 2012Is there a way of sharing a hard drive between two windows 7 PCs without having to set up a workgroup, homegroup or password etc.
View 1 Replies View RelatedWindows Want A Flash Drive To Set Up Secured Connection
Dec 19, 2011Basically, her Windows (not sure which version) is telling her that to set up a secured connection, she needs to use a flash drive for some reason. She thinks she is able to get online right now, but only through an unsecured connection.
I don't think a flash drive is needed for this process, but as I am not even sure what this process is, I'm rather confused. What exactly is Windows asking of her right now? Her main thing is just to be able to connect to the Internet securely and easily.
Windows Wants Flash Drive To Set Up Secured Connection?
Dec 19, 2011Basically, her Windows (not sure which version) is telling her that to set up a secured connection, she needs to use a flash drive for some reason. She thinks she is able to get online right now, but only through an unsecured connection.
I don't think a flash drive is needed for this process, but as I am not even sure what this process is, What exactly is Windows asking of her right now? Her main thing is just to be able to connect to the Internet securely and easily.
How To Reconnect Network Drive In Windows Vista
Sep 20, 2011I have a red x in "My Computer" at the network drive. cannot connect to it. what do you suggest. I am on a pere tp pere network
View 1 Replies View RelatedSharing :: Mapping Network Drive Windows XP
Aug 8, 2011At work we have a private network set up so that any computer that is plugged into the wall is on the same network. (i.e. all ip addresses are identical except for the last block of numbers)All machines are running WinXP.We have one computer set up as a file server (computer with shared folders) that is plugged into a wall socket. We have 3 other machines that can see and access the shared folder on the server computer once they are plugged into a wall socket. The odd thing is that these 3 machines have different settings as far as I can tell. They are all on different workgroups but they have no problem finding the shared folder.However, when I go to plug my laptop into a wall socket, I am not able to map a network drive. The error msg says it cannot find the drive. I have my laptop set-up on the same workgroup as the server computer and the server computer can see my laptop. But when I double click on my laptop in the server computer workgroup I get a msg saying permission is denied.
My laptop can connect to the internet, but cannot find the shared drive. I have tried turning off my laptop firewall, the server firewall, both firewalls etc with no success. In my Local Area Connections I have the following all enabled "Client for Microsoft Networks", "File and Printer Sharing for Microsoft Networks", "QoS Packet Scheduler", "Internet Protocol (TCP/IP)".
Broadband :: Share Any Folder Or Drive Only One User Amongst 20 Users At Windows Xp
Jun 7, 2011I want to share any folder or drive only one user amongst 20 at windows xp.How?
View 1 Replies View RelatedNetgear N300 Router / Windows 7 - Setting Up Network Drive
Mar 23, 2013I've setup a home network using Netgear N300 wireless router (using Windows 7).
I'm trying to get one of my hard drives to be available on the network, so I went to the "sharing" tab of the HD's properties setting and allowed sharing on the HD and turned off password protection so that you don't need a password to access the HD.I also set the permissions to give full control, change, and read access to the "Everyone" group.
From another computer in the network, I tried connecting to the network HD but ultimately got "Access denied" despite the fact that I gave full control to "Everyone".How do I get the computer to be able to connect to the shared HD?
Wireless :: Software Drive Linksys Wmp54g For Windows 2008 Server
Oct 25, 2011i need software drive linksys wmp54g for windows 2008 server
View 2 Replies View RelatedLinksys Wireless Router :: Ea3500 Bridged Mode And Windows Network Drive?
Apr 5, 2013I'm runing an ea3500 in bridged mode, classic configuration, firmware 1.0.30 build 126544. I got ftp working for my usb attached wv delements drive , but it is totally invisible in windows (except for ftp of course).I read in an older post that the usb drive in certain situations does not work (independent of disk manufacturer/type and such) and for certain configurations the ftp option might work but the windows mapped network drive doesn't , does that still apply? does it apply to bridged mode ?
View 1 Replies View RelatedCisco :: WLSE 1030 Hard Drive Failed / Replaced It With New Drive
Mar 17, 2011My WLSE 1030 hard drive failed and I have replaced it with a new drive but when I boot from the 2.15 recovery CD the disc boots and runs, within the console connection I get the error "ERROR: version information not found in flash" the disc is the ejected and the system reboots.How can I reload the system software.
View 3 Replies View RelatedTurning External Hard Drive Into A Cloud Drive?
Mar 19, 2012I'm currently in college, and do most things with my laptop, and I have wifi just about everywhere. It has a generous 500 GB of storage, but I'd like to store non-essential files on, an external hard drive. However, lugging around 3 TB of storage isn't exactly feasible, and with my experience with my current 1.5 TB portable drive, me running around everywhere with it bouncing in my bag is just going to abuse it until it stops functioning (which it has...)[URL]
View 3 Replies View RelatedShare Drive From PC To Laptop But As A Virtual Drive?
Sep 15, 2011I'm trying to share my drive thats on my desktop PC to my Netbook. But I want it to show up on my netbook like a local disk drive. Is this possible? Would I need a software for this and if so which one?
View 1 Replies View RelatedHow To Convert Data Card Into Pen Drive (usb Drive)
Oct 10, 2011i bought Tata photon plus data card around 5 months back. But now i moved from tata photon plus to reliance net connect coz of its poor service . My friends tell me that i can use my old data card as pen drive. what i should do to use my data card as pen drive.
View 3 Replies View RelatedDifference Between Map Drive And Network Drive?
Jun 5, 2011what is the difference between network drive and map drive?
View 1 Replies View RelatedNAS Drive To Appear As A Local Drive?
Jun 8, 2012I am currently using a backup program that I thought would back up from any location including a NAS drive but this is not the case. The backup program does not show the NAS drive directory... I was just wondering if there is a way of making a NAS drive appear as a local drive. I've mapped the drive and created symbolic links for it as well and it still does not appear. I was planning on using the iSCSI method but I believe my NAS does not support it.
View 2 Replies View RelatedOne Site Not Accessible?
Mar 9, 2012Ok so one site i used to use regularly has for the last few month been either incredibly slow or totally inaccessible. Its a perfectly sedate site just a social forum, its this one. www.pandemoniumcarnival.com/ which is accessible to all my friends but seemingly not to me...So far i have changed DNS (to open DNS and Google, thinking my isp had blocked it for some reason)Tried Firefox (my usual browser) chrome, IE ...flushed all the settings etc in each no cookies etc. Tried "In Private Browsing" etcOddly i can get to the site if i use a site called "Hide my ***" a proxy server thing. But even then its not fully functioning due i think to the proxy setting (?)
View 8 Replies View RelatedWAN Miniport (IP) - My Lan Systems Are Not Accessible?
Feb 22, 2011i found WAN Miniport (IP) - in my windows xp and at the same time my Lan systems are not accessible.
View 1 Replies View RelatedComputer Not Accessible From Server By Name?
Mar 19, 2011I'm working on a small network (1 server, 6 workstations, stand-alone, not connected to the main Company Network) "reinstalling" a Workstation. Re-imaging from semi-generic Norton Ghost image (4 of the 6 Workstations run the same programs with different addresses). I then had to reset the IP, the Computer Name, and then the Domain (I did it in that order).
I'm using Windows Server 2003 as the domain controller, and the Workstation is Xp Pro Sp 2.
The Workstation is using the same IP, Name, User as before, and they were working with the server previously (a program had corrupted prompting the reinstall).
The problem is that if I open windows explorer and type in the Workstations IP (\000.00.0.1) I get access to the computer. But if I go there and type in the Workstations Name (\Computer01) I get a "you may not have permission to use this network resource" error.
If I go to the work station, and try the same thing except with the Server's IP (\000.00.0.100) and Name (\Server01) I get access.
This Workstation controls an I/O device that is used by a program running on the server (most of the time, not while I'm doing the install of course) and the program uses the Workstation's Computer Name to access it.
As far as I can tell all the settings on this Workstation match the 3 that are running the same programs, but I could have missed something.
I'm a bit stumped by this, I don't normally deal with the Server side of the computers. I usually just set up the workstations to whatever Name/IP the Net-admins give me. But my bosses put me in charge of this little network, mainly because the Net-admins din't want to deal with it.
Network :: Getting Message - PC Is Not Accessible?
Jul 8, 2012I was trying to connect my computers on a home network so that I can access either one via the other.When I try however I get the message:
"***-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
long failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a police restriction has been enforced.
That is the message from computer 1 to computer 2.
Computer 2 gives me the message:
Windows cannot access \***-PC
Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.
Router Ip Address Is Not Accessible?
Jan 31, 2013I have a linksys router and i'm having quite a big issue. it's been since 2010 that I bought it and have no problems up until recently. I was playing/ going through all the security settings just to what all there was to secure my router. I noticed an ip setting and I 95% sure I did something which changed it; and now i am unable to access my router settings. Whenever I type the old ip address (192.168.1.1 or any of the few other ip addresses) it gives error page and says this page is non existent or it gives me a link to click on with the failed ip address to do a google search. My question is, is there any way that I can reset the router (like a system restore on a computer),
View 2 Replies View RelatedHome Network Share Not Accessible But Other One Is
Mar 26, 2011I have a fairly simple wireless home network. My main desktop machine is running XP Pro, and our family laptop is running XP Home. The laptop shares the My Documents folder for 2 of the 3 profiles. One of them works as it should. It is visible and accessible on the main desktop machine, but the other share is visible but NOT accessible. I get the following error message when I try to explore it from the main desktop machine:
<the share name> is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
Access is denied.
I'm not sure when this started, but remember that the other folder being shared is working just fine. I've double and triple checked the settings, share names, and basically anything I could possibly mistype. I've restarted both PCs, and refreshed the network explorer via both the file explorer and My Computer dialog. The My Computer dialog refresh the shares for some reason that the explorer wouldn't, but I'm still denied access to that one share on the laptop.
Internet Accessible But Cannot Access Other Computer On LAN
Aug 15, 2012I have a Windows 7 machine that is wired to the router. I have Windows XP computer that is wireless in another room. Signal is showing 80% and internet is accessible and fast from both systems; but, I cannot access either computer from the other computer. I got the IP addresses of each machine and I cannot ping from either direction. Firewalls are turned off on both systems.When I type in \server, I get an error that say I should check my spelling or use the windows Search; but, that doesn't work.
View 5 Replies View RelatedMake Printer Accessible From Internet?
Jun 28, 2011I have a Motorola Affix and am using the app printershare to print from my phone to a network printer at home.. it works great.. but I want to know if there is a way to make the printer accesable from the internet so I can print from pt phone when im not home and connected to the network...accessible
View 2 Replies View Related