Wireless :: Software Drive Linksys Wmp54g For Windows 2008 Server
Oct 25, 2011i need software drive linksys wmp54g for windows 2008 server
View 2 Replies
ADVERTISEMENT
Linksys Wireless Adapters :: WMP600N Compatibility With Windows Server 2008?
May 1, 2011WMP600N is compatible with Windows 2008 Home Server?
View 1 Replies View RelatedLinksys Wireless Adapters :: WUSB300N Windows Server 2008 Doesn't Find Any Network?
Aug 9, 2008I've just bought a WUSB300N Wireless USB Network Adapter and installed it with the Vista drivers on my Windows 2008 server. Drivers are succesfully installed and the Device status says "Device is working properly" but when I want to connect to a network it doesnot show any networks. I'm sure there are network available because I'm connected now on my other laptop ;-) typing this message.
View 5 Replies View RelatedLinksys Wireless Adapters :: Windows 7 / 64 Will Not See WMP54G?
Dec 24, 2011making Windows 7 do what it's supposed to? Seriously, there needs to be a button you can click to roll it completely back to XP.
View 1 Replies View RelatedLinksys Wireless Adapters :: WMP54G Not Linking With Windows 7
Jul 23, 2012I installed Windows 7 Ultimate on my computer, and I cannot get my Linksys to work on it, the light doesn't light but it shows up in device manager. I've tried using Vista 32-bit drivers but it doesn't work at all, I am thinking it isn't a driver issue at all because it shows that the driver is up to date.
View 1 Replies View RelatedCisco :: Change LMS 4.0.1 From Server Under Windows 2003 To New Server Under Windows 2008 R2
Jul 5, 2012I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View RelatedLinksys Wireless Adapters ::Windows 2000 PC Can't Detect WMP54G
Nov 30, 2009I just bought this wireless g pci card and installed the software from the cd on to a windows 2000 pc. When I went to run the software I can only click on the exit button. I looked on the forums and saw that for win 2000 you should only install the drivers by allowing your computer to detect the card. I uninstalled the software but my computer wont detect the card now and if I reinstall the software I cant even open it up anymore. The card is not listed in the device manager at all. Would installing i the first time have created anything in the registry that would have been left behind in the uninstall and would it be blocking the computer from detecting this as new hardware?
View 9 Replies View RelatedLinksys Wireless Adapters :: WMP54G / Windows 8 - Network Driver
Dec 3, 2012I recently bought and installed Windows 8 Pro and figured that there are no drivers available for the WMP54G Wireless Network Adapter (version 4.1)on this OS. What is the solution?
View 4 Replies View RelatedLinksys Wireless Adapters :: WMP54G Software Only Partially Uninstalls From Windows 98
Jul 12, 2011I installed the Linksys WMP54G wireless adapter card in my windows 98 SE computer before I installed the software. (I now know the software is supposed to be installed before the hardware is installed.) The software didn't work. It wouldn't connect to any network. (I have used this adapter card and software before, so I know how to get it to connect when it is working properly.)I used the uninstall to uninstall it, but it didn't work. It removed most of the files, but in the "program add/remove" window (in control panel), the Linksys software is still listed. Using "program add/remove" to try to remove the Linksys software also doesn't work. It acts as if it is removing the software and then shows a message that says the software is 100% removed, but, after rebooting, the software is still listed in the "program add/remove" list. The WMP54G CD won't reinstall the software. Instead it says the software is already installed. How to find whatever WMP54G software file(s) are left on my computer and tell me how to manually remove them.
View 1 Replies View RelatedLinksys Wireless Adapters :: Install WMP54G PCI Version 4.1 In Windows 2000 Pro SP4 Computer?
Mar 26, 2011I'm trying to install a WMP54G PCI Version 4.1 in my Windows 2000 Pro SP4 computer. I ran the setup cd before installing the card, then took out the disk. After installing the card and powering the computer, the Available Wireless Network screen didn't appear. I also didn't get the Network Monitor icon on the taskbar. Network Monitor appears in the start menu, but can't be started. Device Manager says the card is working properly and there are no conflicts.
I uninstalled the software, removed the card, and repeated the installation process with the same end result. The card light blinks like it is receiving data. I'm using a Linksys WRT54G2 router. Both my desktop (W7) and my laptop (Vista) connect just fine. How can I get my W2K computer on the network?
Cisco Wireless :: AP541N With Windows 2008 Radius Server?
Jan 24, 2011I am trying to connect an AP541N to a radius server for Domain authentication but cannot figure out how to Configure the widows 2008 Radius server to authenticate users but cannot seem to get the AP541N to do this, how to configure both the 2008 radius server and also the AP541N?
View 2 Replies View RelatedCisco Wireless :: WLC 2500 Series Setup With Windows Server 2008 R2
May 15, 2011I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.I got 2500 WLC with POE switch and 4 aironet AS 1142.
View 16 Replies View RelatedCisco Wireless :: WLC 2500 Series Setup With Windows Server 2008 R2
Jun 27, 2012I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.
I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.
In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.
I got 2500 WLC with POE switch and 4 aironet AS 1142.
Can't Connect To Server 2008 Via Server Manager On Windows 7
Feb 11, 2011I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies View RelatedLinksys WMP54G Drivers For Windows 8 64bit
Nov 23, 2012I just recently upgraded my OS from Win XP 32 bit to Win 8 64 bit. I am trying to get everything in order and most of the drivers are now working (CCC for my graphics card, driver for my Striker). However, I am having difficulty locating the driver for 64 bit windows for my Linksys adapter.
For the moment I am running wifi by using my old XP setup (which is the only way I can post on [H]). :P
Server 2008 R2 Windows Server Backup
Dec 14, 2010I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
Windows Server 2008 With Reg Key?
Mar 7, 2013I am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.
View 1 Replies View RelatedWindows Server 2008 R2 VPN
Aug 13, 2012I have a dedicated windows server 2008 r2 enterprise.I am running an SSTP VPN but only have 2 IP address to connect to the internet on.My issue is that one of the IPs is for the IIS7 etc and the other is for VPN use.How can I apply the same IP to more than one user allowing them to connect all at one.There are in total about 5 users who want to use the VPN service and I dont really want to pay.How do I apply the same IP to all accounts and allow them to connect and all use the same IP at once.
View 5 Replies View RelatedHow To Use Windows Server 2008 As Router
Sep 4, 2012I am involved in a huge project that requires Servers PCs to function as Routers in schools to prevent broadcast traffic issues (Thread here: Need Professional Advice on 3 MANs implementations - Long story short: Can't buy regular routers because of budget and neet to use current equipment to make the network work, that is, Windows Servers 2008 with 2 NICs.
Now to the point. We are making tests but can't make Static routes to work properly. Design is as follows:
Now we have seen that we need to use this command (in cmd) to add a static route in W2008:
route add [NETWORK DESTINATION] mask [SUBNETMASK] [GATEWAY] if [NIC]
Q1: What exact command(s) do we have to use to make the Laptop in 10.10.10.0 to access Internet? How would you fill those fields based on the diagram?
Q2: How many Static routes do we need to declare? I am guessing we just need one, but I have been told that I need to activate two (one for packets sent by the laptop to the router, and one for the packets sent by the router to the laptop?)
We have tried several combinations and can't make laptop to access Internet, not even to ping 192.168.1.5. We have just accomplished pinging to 192.168.1.181 from the Laptop, and to ping 10.10.10.2 from the Server but that's as far as we went.
Can't Join A Windows 2008 Server
Jul 17, 2011I can't join a Windows 2008 Server from client computer running Windows Vista Business Edition. I get the message "Network path not Found" yet I can ping the server and the server can ping my computer.
View 2 Replies View RelatedInstalling Windows 7 On Server 2008 LAN
Mar 24, 2012Any methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View RelatedWindows Server 2008 R2 With Dynamic IP?
Jan 9, 2013I have a home server that I'm using to host a site with a domain purchased from Go Daddy. I understand how to set up a static IP address on Win Server 2008, but my provider will not allow for me to purchase a static IP because I'm a home customer, not a business.My question is this: should I just ipconfig my ip address every seven days and then change my server's address? Is there a software alternative? Is it necessary for me to change it at all?
View 1 Replies View RelatedHow To Setup NAT In Windows Server 2008
Nov 5, 2011i m having one static ipwant to create the network in computer labhow i do thisi have one cisco router assigned with one ip address
View 1 Replies View RelatedStatic IP For Windows 2008 Server R2
Jun 17, 2012I want to run my own web server. i have Windows 2008 Server R2. we hv one router for internet and it is linked with switch. 30 computer are running on local LAN and getting Internet. now my ISP give me a block of IP. i want to give it to web server. what is the simplest way to use that IP and my web server is Online and also all user have to access to Internet.
View 4 Replies View RelatedUsing Windows Server 2008 R2 As Webhost?
Nov 8, 2011Is it possible to use windows server 2008 as a webhost for a website i'm building?
View 6 Replies View RelatedCisco :: Does WCS 5.0 Run On Windows 2008 Server
Feb 8, 2009Does WCS 5.0 run on Windows 2008 Server. Does it run on a 32 or 64-bit OS? The WCS datasheet does specify that it can be easily installed on VMware Systems. Does it mean it can be virtualized.
View 6 Replies View RelatedWindows Server 2008 Core Installation
Jul 27, 2011Any here ever used a Windows Server 2008 Core installation? Got one running on a VM right now, thought I'd try it. After installing VMWare Tools things really speeded up. Now gave it a static IP, installed Active Directory services (DNS along with it) and everything seems to work. The RAM usage is about the same, but so far it's been much more responsive, and it takes a lot less disk space, it needs just under 3GB for the moment. Any else here have one running, or seen one in a production environment? I don't think they're very common yet.
View 3 Replies View RelatedDesktop Redirection In Windows 7 On Server 2008 Dc?
Jul 26, 2011im having problems getting desktop folder redirection to work on windows 7 machinesI have users set up just with local profiles but want to redirect "my documents" and "desktop" directories to the server. I have set up the gpo's on the server and it all works fine propergating to the xp machines but the windows 7 machines just wont take the desktop redirection. However "eventually" it did take the "my documents" redirection policy
View 7 Replies View RelatedVpn And Mapped Drives Server 2008 Windows 7?
Jan 30, 2013I have a windows 2008 foundation server at a clients property and they wish to have users access shares on a data drive that is seperate on the server.I have the server setup with active Directory Users and logon scripts to their local shares on the data drive but need to setup VPN so they can use their mapped drives at home.
View 1 Replies View RelatedInstalling Windows 7 Using GPOs On Server 2008
May 27, 2011What are step by step methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View RelatedSetting Up A Network To Run Windows Server 2008?
Nov 29, 2012i am setting up a network with a server able to run windows server 2008 and using duo core computers as work stations. Will it work with using windows 7 as the operating system for the work stations?
View 5 Replies View RelatedWindows Server 2008 / RDP Through Router - No Control
May 1, 2012I have an office with a network that I have no control of. I can't access the router to make changes at all. The router does have a real IP address.There is a server on this network that I need to access through remote desktop. (Terminal services on Windows Server 2008)Normally I would just pass 1723 through the router and set up VPN. Without control of the router I am lost. I really don't want to use services like Logmein or Gotomypc, because these control the console.
View 1 Replies View RelatedWindows 2008 R2 Server - Error 105 For Gmail Only?
Mar 8, 2013I run a tiny home domain with 1 Windows 2008 R2 server and 2 clients (one for me and one for the hubby). Our server is DC, DNS, and DHCP server (and some other roles). Our clients are both Windows 8 but we use the standalone Chrome installation, version 25.0.1364.152 m.The problem is that on my Windows 8 client, every once in a while (not the same time period each time, but roughly every 6-15 days) I get the error in the title on one site when using Chrome only, which is Gmail. I can access and resolve Google and every other site, and my DNS server itself can resolve Gmail, but not until I flush the DNS of my local client will Gmail work again. Also strangely, I have left it on the morning when it happened before, and when I came home from work it had sorted itself out. The other client, hubby's Win 8 PC, also sometimes gets this issue, but not nearly as often as I do. Flushing the local DNS cache resolves it for him as well.
I used my ISP's DNS servers for forwarding initially, but changed to Google's 8.8.8.8 and 8.8.4.4 when this kept happening, and it didn't seem to make a difference. I've enabled scavenging and aging and all sorts and those are faithfully renewing themselves as expected, but as the problem only lies on the clients and never the server, I'm quite lost as to what to try next.I've had a look on the Chrome forums (gulp) and nothing seems to be as specific as this fault
