I am trying to connect an AP541N to a radius server for Domain authentication but cannot figure out how to Configure the widows 2008 Radius server to authenticate users but cannot seem to get the AP541N to do this, how to configure both the 2008 radius server and also the AP541N?
View 2 Replieshow to set up 2008 (NPS and NASs) RADIUS Server for 802.1X Wireless clients.
View 1 Replies View RelatedI have some aironet 1200 AP's. I want to use this with a windows 2008 radius server. I followed the guide on [URL]. Unfortunately I can not get this working. In the securtiy log of the event viewer there is always the message "authenication was not succesful because an unknown username or incorrect password".
- Is it possible to get this working?
- If yes, is there a manual how to configure the AP's and the radius server, or are there any hints?
- Is this the best way to setup a wireless network or is there a better way?
I saw there is also a local radius server inside the 1200. Can all the 1200's work together? I suppose that if I use the built-in radius server than I can't make a connection to my AD database, correct?
We are in the process of upgrading our win2003 radius server with a new win2008 radius server. We have an ASA5520 and FWSM in 6509, using anyconnect client. This has worked fine until we introduced the win2008 radius server. When in the asdm on the asa, you can click on the new server and click test and authenticate ok with your AD credentials. But when try to use anyconnect on your laptop, it takes the credentials password and the accept certificate, but then fails with "anyconnect was not able to connect to specified gateway.." message, then "the secure gateway has rejected the connection attempt due to network connectivity issue...host or network is 0" message. We thought we setup the new radius the same way, obviously not. is therw an easy way to use debug on the firewalls to see what is wrong? looked in event logs on radius server, have not found anything.
View 2 Replies View RelatedI planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View RelatedI am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.I got 2500 WLC with POE switch and 4 aironet AS 1142.
View 16 Replies View RelatedI am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.
I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.
In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.
I got 2500 WLC with POE switch and 4 aironet AS 1142.
i need software drive linksys wmp54g for windows 2008 server
View 2 Replies View RelatedWMP600N is compatible with Windows 2008 Home Server?
View 1 Replies View RelatedI have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies View RelatedI've just bought a WUSB300N Wireless USB Network Adapter and installed it with the Vista drivers on my Windows 2008 server. Drivers are succesfully installed and the Device status says "Device is working properly" but when I want to connect to a network it doesnot show any networks. I'm sure there are network available because I'm connected now on my other laptop ;-) typing this message.
View 5 Replies View RelatedI've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
I am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.
View 1 Replies View RelatedI have a dedicated windows server 2008 r2 enterprise.I am running an SSTP VPN but only have 2 IP address to connect to the internet on.My issue is that one of the IPs is for the IIS7 etc and the other is for VPN use.How can I apply the same IP to more than one user allowing them to connect all at one.There are in total about 5 users who want to use the VPN service and I dont really want to pay.How do I apply the same IP to all accounts and allow them to connect and all use the same IP at once.
View 5 Replies View RelatedDoes WCS 5.0 run on Windows 2008 Server. Does it run on a 32 or 64-bit OS? The WCS datasheet does specify that it can be easily installed on VMware Systems. Does it mean it can be virtualized.
View 6 Replies View RelatedI am involved in a huge project that requires Servers PCs to function as Routers in schools to prevent broadcast traffic issues (Thread here: Need Professional Advice on 3 MANs implementations - Long story short: Can't buy regular routers because of budget and neet to use current equipment to make the network work, that is, Windows Servers 2008 with 2 NICs.
Now to the point. We are making tests but can't make Static routes to work properly. Design is as follows:
Now we have seen that we need to use this command (in cmd) to add a static route in W2008:
route add [NETWORK DESTINATION] mask [SUBNETMASK] [GATEWAY] if [NIC]
Q1: What exact command(s) do we have to use to make the Laptop in 10.10.10.0 to access Internet? How would you fill those fields based on the diagram?
Q2: How many Static routes do we need to declare? I am guessing we just need one, but I have been told that I need to activate two (one for packets sent by the laptop to the router, and one for the packets sent by the router to the laptop?)
We have tried several combinations and can't make laptop to access Internet, not even to ping 192.168.1.5. We have just accomplished pinging to 192.168.1.181 from the Laptop, and to ping 10.10.10.2 from the Server but that's as far as we went.
I can't join a Windows 2008 Server from client computer running Windows Vista Business Edition. I get the message "Network path not Found" yet I can ping the server and the server can ping my computer.
View 2 Replies View RelatedAny methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View RelatedI have a home server that I'm using to host a site with a domain purchased from Go Daddy. I understand how to set up a static IP address on Win Server 2008, but my provider will not allow for me to purchase a static IP because I'm a home customer, not a business.My question is this: should I just ipconfig my ip address every seven days and then change my server's address? Is there a software alternative? Is it necessary for me to change it at all?
View 1 Replies View Relatedi m having one static ipwant to create the network in computer labhow i do thisi have one cisco router assigned with one ip address
View 1 Replies View RelatedI want to run my own web server. i have Windows 2008 Server R2. we hv one router for internet and it is linked with switch. 30 computer are running on local LAN and getting Internet. now my ISP give me a block of IP. i want to give it to web server. what is the simplest way to use that IP and my web server is Online and also all user have to access to Internet.
View 4 Replies View RelatedIs it possible to use windows server 2008 as a webhost for a website i'm building?
View 6 Replies View RelatedAs always, I am trying to install LMS 4.1 on windows server 2008 R2 and after the installation and login to the LMS I find the following:DCRServer is down or may not be completely up. Check if the DCRServer process is running.And after some troubleshooting I found that the LMS is not creating the CMF database and the other databases.
1. I have downloaded the installation file from Cisco website twice, so I do not think it is the file that is corrupted, also it is only evaluation license.
2. I have met all the prerequisites and requirement as in the documentation guides, but maybe there is something still wrong.
Any here ever used a Windows Server 2008 Core installation? Got one running on a VM right now, thought I'd try it. After installing VMWare Tools things really speeded up. Now gave it a static IP, installed Active Directory services (DNS along with it) and everything seems to work. The RAM usage is about the same, but so far it's been much more responsive, and it takes a lot less disk space, it needs just under 3GB for the moment. Any else here have one running, or seen one in a production environment? I don't think they're very common yet.
View 3 Replies View Relatedim having problems getting desktop folder redirection to work on windows 7 machinesI have users set up just with local profiles but want to redirect "my documents" and "desktop" directories to the server. I have set up the gpo's on the server and it all works fine propergating to the xp machines but the windows 7 machines just wont take the desktop redirection. However "eventually" it did take the "my documents" redirection policy
View 7 Replies View RelatedI have a windows 2008 foundation server at a clients property and they wish to have users access shares on a data drive that is seperate on the server.I have the server setup with active Directory Users and logon scripts to their local shares on the data drive but need to setup VPN so they can use their mapped drives at home.
View 1 Replies View RelatedWhat are step by step methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies View Relatedi am setting up a network with a server able to run windows server 2008 and using duo core computers as work stations. Will it work with using windows 7 as the operating system for the work stations?
View 5 Replies View RelatedI have an office with a network that I have no control of. I can't access the router to make changes at all. The router does have a real IP address.There is a server on this network that I need to access through remote desktop. (Terminal services on Windows Server 2008)Normally I would just pass 1723 through the router and set up VPN. Without control of the router I am lost. I really don't want to use services like Logmein or Gotomypc, because these control the console.
View 1 Replies View RelatedI run a tiny home domain with 1 Windows 2008 R2 server and 2 clients (one for me and one for the hubby). Our server is DC, DNS, and DHCP server (and some other roles). Our clients are both Windows 8 but we use the standalone Chrome installation, version 25.0.1364.152 m.The problem is that on my Windows 8 client, every once in a while (not the same time period each time, but roughly every 6-15 days) I get the error in the title on one site when using Chrome only, which is Gmail. I can access and resolve Google and every other site, and my DNS server itself can resolve Gmail, but not until I flush the DNS of my local client will Gmail work again. Also strangely, I have left it on the morning when it happened before, and when I came home from work it had sorted itself out. The other client, hubby's Win 8 PC, also sometimes gets this issue, but not nearly as often as I do. Flushing the local DNS cache resolves it for him as well.
I used my ISP's DNS servers for forwarding initially, but changed to Google's 8.8.8.8 and 8.8.4.4 when this kept happening, and it didn't seem to make a difference. I've enabled scavenging and aging and all sorts and those are faithfully renewing themselves as expected, but as the problem only lies on the clients and never the server, I'm quite lost as to what to try next.I've had a look on the Chrome forums (gulp) and nothing seems to be as specific as this fault
I just finished setting up VPN server on my Windows 2008 server. I defined the users that should be able to access the server and applied permissions. When I test the VPN connection on the LAN (loacally) I have no trouble connecting and establishing VPN connection.However when I tried externally it's a different story. I am not able to connect and always get the same not so clear 800 error ...The remote connection was not made because attempted VPN tunnel failed. I have Zyxel router for my internet connection and I have forwarded all relevant ports I think for the protocols I am using. Port such as 1723,1701,1702,47,50,51,500,1293,443,4500 are forwarded to the server.I am able to telnet to the server on port such as 1723.
View 1 Replies View RelatedI want to set up a domain for a file server and MS SQL 2005 server on my server machine and installed windows server 2008 in it.
Do I need to set up DHCP server and DNS on Windows server 2008R2 or leave them to the router to do the job?
I have been having a number of different problems (Java not being able to start, polling jobs not being able to add devices, etc) and am wondering if the root cause could be a rights issue on my server. I have installed LMS (which was an upgrade from 3.x to 4.0 on one box and then 4.0 to 4.1 on a different box). The software is installed on a D: drive with C: as the OS drive.My understanding is that causer and local admins need full rights to the entire file structure of ..program filesciscoworks directory... and I am wondering if there are other locations that need additional access.
View 1 Replies View Related