Network Drive Not Accessible If Antivirus Avg Installed?
Jun 20, 2012My network drive is not working if i install antivirus. It shows 'access denied". if I uninstall, i can access the network drive.
View 3 Replies
ADVERTISEMENT
Windows 7 C Drive Is Not Accessible In XP?
Aug 31, 2012I can not access shared windows 7 c drive in windows xp. how can i view these system
View 3 Replies View RelatedServers :: Mapped Drive Is Not Accessible Sometimes
Dec 5, 2012i have shared 4 network drive in my client computer but sometime when we leave computer on for a couple of hours and then try to access the drives then it shows the message "network drive is not available" the only way to access the drive is to restart computer.
View 1 Replies View RelatedSharing :: Mapped Drive On Windows NT 2000 Server Not Accessible?
Mar 26, 2012I have a domain with a domain controller Server 2003. I have a backup dc running an application with server 2008. The shared folder I am trying to access is on an nt server 2000. We have had a mapped drive "I:" and have used it for years. Our copier also scans to a shared folder on the server 2000 machine. All of the desktop systems are xp sp3 with one W7 machine. A couple of weeks ago when user attempted to access the shared/mapped drive, an error would occur that "the drive was in use and they could not be logged on". Sometimes the error would say "you don't have permission to access the drive." Mind you no settings have been changed on the network. When either of these errors would occur it would occur for everyone but if I rebooted the server everyone could connect again. The same errors would occur the next day or 6 - 8 hour later. Now the error has occured "Drive is already in use and you cannot be logged in" (I have tried drive Z as well the drive is not in use) and restarting the serever no longer works. No one can access the shared drive. I have unmapped the drive on my system and have attempted to reconnect, I enter the path and check reconnect at logon and it asks for a password. I enter the administrator password (which is what I always used) and it just pops right back up asking for a password as if I entered nothing. I can ping the server with the shared folder and even logon remotely so I know it is not a physical disconnect. I am not sure what changed and have followed many suggestions found to no avail. We cannot access the shares or scan.
View 1 Replies View RelatedDell :: 1545 Cannot Connect To Wi-Fi After New Hard Drive Installed
Mar 9, 2013I have a Dell Inspiron 1545 and I recently installed a new hard drive. Everything is working fine EXCEPT the WIFI. In the Device Manager the Network Controller has a yellow triangle with a exclamation point in it. I have tried to search to find the driver but it says it is unable to locate it. When I download the Intel driver from the Dell website, it downloads but nothing ever opens.
View 5 Replies View RelatedHome Network :: Kaspersky Antivirus Is Not Running
Sep 5, 2011I have installed anti virus but it can't run. Is there any administrator rights.
View 1 Replies View RelatedBest Antivirus That Is Available To Keep Network Secure From Data Mining?
Mar 16, 2011What is the best antivirus that is available to keep my network secure from data mining?
View 2 Replies View RelatedMedialink Router / Installed Second Hard Drive Now Can't Connect To The Internet
Aug 9, 2012My desktop internet was working fine earlier today. I bought a new hard drive and installed it without any trouble. I plugged my machine back in and received a "no internet connection" message. I have tried (what I think is) everything: unplugged my modem and router and plugged it back in as if it was the first time with the 60 second pauses and whatnot; tested the connection with my cable modem service provider; unplugged and checked cable connections; did ipconfig/flushdns ... I'm really not sure where to go from here.My wireless configuration works fine, as I am able to connect both wirelessly and wired to the router on my laptop. I cannot connect via the modem or router to my desktop PC.Windows 7 running 64-bit, Motorola Surfboard modem (brand new), Medialink router (also brand new), custom built machine.
View 1 Replies View RelatedDifference Between Map Drive And Network Drive?
Jun 5, 2011what is the difference between network drive and map drive?
View 1 Replies View RelatedNetwork :: Getting Message - PC Is Not Accessible?
Jul 8, 2012I was trying to connect my computers on a home network so that I can access either one via the other.When I try however I get the message:
"***-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
long failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a police restriction has been enforced.
That is the message from computer 1 to computer 2.
Computer 2 gives me the message:
Windows cannot access \***-PC
Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.
Home Network Share Not Accessible But Other One Is
Mar 26, 2011I have a fairly simple wireless home network. My main desktop machine is running XP Pro, and our family laptop is running XP Home. The laptop shares the My Documents folder for 2 of the 3 profiles. One of them works as it should. It is visible and accessible on the main desktop machine, but the other share is visible but NOT accessible. I get the following error message when I try to explore it from the main desktop machine:
<the share name> is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
Access is denied.
I'm not sure when this started, but remember that the other folder being shared is working just fine. I've double and triple checked the settings, share names, and basically anything I could possibly mistype. I've restarted both PCs, and refreshed the network explorer via both the file explorer and My Computer dialog. The My Computer dialog refresh the shares for some reason that the explorer wouldn't, but I'm still denied access to that one share on the laptop.
Cannot Ping System But Network Accessible
Jun 29, 2012Cannot Ping System but system can ping everyone on the network accessible
View 2 Replies View RelatedShared Files Not Accessible On Network
Jan 19, 2011I have a router-based home network in which the desktop running XP media center is connected by cable to the router. There are 2 wireless laptops, one running XP home and the other Windows 7.The laptops can talk to each other, and the desktop can talk to the laptops.But I cannot access the desktop from the laptops. I can see the (shared) folders, but when I click on one I get the message: "You might not have permission to use this network resource..Not enough server storage is available to process this command." One solution suggested in several places is to change the IRPStackSize to 15. However, if I start the desktop in safe mode with networking, I can access the files.I can also access the machine using remote desktop.One extra frustration is that this is a problem that has happened relatively recently. It used to work OK.
View 8 Replies View RelatedHome Network :: Asus RT-N13U DD-WRT Web UI Not Accessible?
Dec 10, 2012I flashed my router to DD-WRT, but I could not access the web UI which is suppose to come on typing 192.168.1.1 in the web browser. . It used to come fine before but I reflashed to Asus Firmware but now I cannot access it. I have tried several times to flashing it to Asus Firmware and Back to DD-WRT, but it didn't work. When I flash to ASUS everytime my old settings are still the same. I tried assigning a static IP also.
View 1 Replies View RelatedWorkgroup Is Not Accessible - You Might Not Have Permission To Use This Network Resource
Sep 17, 2012I have a network with aprox 150 workstations (90% windows XP profesional, 10% Windows7 32 or 64 bit), and I receive from time to time this message ONLY on windows XP workstations:" Workgroup is not accessible.You might not have permission to use this network resource" All the time I could access the various workgroup computers by entering their IP like \192.168.1.5 or \mikepc All the time i can ping any of the workstation without any problem.All the time using Search computers on the network I find computer name.
View 1 Replies View RelatedDesktop Not Accessible From Laptop In Home Network
Aug 19, 2011My desktop is not accessible from my laptop in my home network. This seemed to happen all of a sudden.Contact the administrator of this server to find out if you have access. PS: I can access the laptop from my desktop.
View 14 Replies View RelatedWireless Network Is Not Accessible From Dell D830
Feb 4, 2012I have a Dell D830 that was given to me. I bought a new hard drive and restored the operating system to XP. I can't access the internet now through my wireless network at home. I've tried to setup a new connection in the network connection but that's there is nothing to connect to, nothing is working.
View 3 Replies View RelatedD-Link DIR-655 :: Internet Accessible But No Network Access
Mar 4, 2011Internet access is working fine, however I cannot get my computers to work on the network therefore cant share any files or play any network games. The router is set up as DHCP server therefore IPs are automatically assigned, this is setup on the PCs and the router. The work group is also set. Exactly same settings basically as my old router which worked fine but wont on this one! I have 3 wired PCs and a wireless laptop. 2 PCs are windows XP the other is Windows 7 and the laptop is windows 7. The wireless win7 laptop will recognize my win7 wired PC and vice versa and can share everything without problems, but they wont have anything to do with the wired winxp PCs, on top of that the 2 winxp wont recognize each other either so don't think its anything platform specific. I have also tried setting up static IPs for each computer - still no joy.This is a brand new D-Link DIR-655 Rev B1 firmware 2.00
View 3 Replies View RelatedE3000 - Accessible Network Devices Cannot Be Seen In List Of Computer
Mar 1, 2012I recently change routers to a Linksys E3000 wireless router from a Uverese 2wire residential gateway and all worked well for a short time nothing changed however when I go to view network devices from Win7,Vista or XP computers the network devices are no longer there. when I shut down and reboot the router and switches I still cannot see these devices, however when I hook up my old 2wire router I see my devices again. Even when I reconnect to the E3000 all the devices can be viewed for a few hours. Changing routers resets something but maybe overloads the linksys E3000 after a few hours? maybe this E3000 is just defective?
When I view a network map in Network & Internet all the devices appear in the map The configuration is Linksys E3000 router with two (2) 8 port Trendnet gigabyte switches and One (1) 8 port Trendnet Poe 10/100 switch. They are chained router to 8 port gig to 8 port gig to 8 port Poe 10/100. Prior to this I had the router to each switch separately - - this does not seem to matter works the same either way
Devices attached - Network printer,XP desktop, Vista Desktop, NAS, WDTVlive media player, Roku, Home automation controller, IP touch screen for the automation, security DVR (wireless devices are all ok Win7 laptop, Vista laptop, Ipad)seldom are more than 3 devices being used at one time light traffic.)
Can't Turn On Any Security And Antivirus Software
Feb 27, 2013I lent my laptop to a friend for a week, have it back but now Windows security center won't start along with firewall and defender and my Mcfee won't open either... I try to look on line but any web pages to do with anti virus software won't open?
View 2 Replies View RelatedWindows 7 Can't Receive Internet Network Traffic - Gateway Accessible
Aug 18, 2012I just got my dad's old notebook (VAIO VPC F223FB) which is better than my older one. So, I did a backup and then managed to clean install a Windows 7 Professional x64.At first I had a problem with the drivers, because the internet wasn't connecting and the USB ports weren't detecting my External Drive. So, I tested other USB port and got it. Installed the drivers and I could connect to the wireless network. But it doesn't detect the ethernet cable! And I want it detecting because then it's faster. I already tried downloading the Ethernet Controller driver. At first, I downloaded through Sony's support site but it didn't recognize the driver. Now, it recognizes but still doesn't connect it. And when I tried Solving Connection Problems, it said the network gateway was accessible but Windows can't receive Internet network traffic.
View 5 Replies View RelatedCisco VPN :: ASA5510 Remote Access / LAN Not Accessible Inside Network
Jan 6, 2013I am facing a problem with Cisco ASA remote access VPN, the remote client is connected to VPN and receiving IP address but the client is not able to ping or telnet any internal network.I have attached running configuration for your reference.
-FW : ASA5510
-Version : 8.0
Site to Site VPN is working without any issues
Wireless Not Working After Downloading Antivirus Software?
Sep 26, 2011Pretty much immediately after that I was unable to connect to internet via wireless but could still connect via ethernet cable. I have tried searching the internet and my computer to see if I could fix myself, as I'm sure there's probably just some settings somewhere that have been altered - but I'm completely bamboozled!! One thing that I noticed when trying search for settings etc is that I cannot add any wireless networks, or select my wireless network (in the network and sharing centre) so that I can select 'diagnose and repair' - my laptop just doesn't pick up anything!I have an eMachines E525 laptop with built in wireless (Atheros AR5007EG wireless network adapter) and operating system is Windows Vista Home Basic SP2.
Also, not sure if related, but on start-up I get an error message saying 'Microsoft Windows Search Indexer stopped working and was closed. A problem caused the application to stop working correctly. Windows will notify you if a solution is availablenyway, I have done the wireless test that I found in of the older posts on this topic already and results are below, my wireless network is highlighted
Cisco Firewall :: Not Clear ASA 5515-k9 With Antivirus Or Not?
Oct 22, 2012i would like to use ASA 5515-k9 with Antivirus and antispam but i don't know the part number that support this and how it process .
View 3 Replies View RelatedLinksys Wireless Router :: X3000 FW V1.0.03 - Internal Network Not Accessible Via WLAN?
Feb 1, 2013I am experiencing one, possibly two problems with the X3000, firmware release v1.0.03:
1. When enabling guest mode, the internal network is not accessible via WLAN even for clients NOT connected via guest mode but regularly: Even non-guests but regularly connected clients can't access any internal IP but the router itself. netscan shows only the very client's IP and the router's. Only after switching guest mode entirely off, regularly connected clients can access interal IP again. netscan correctly shows the whole network. Obviously a firmware bug. BTW: Clients connected via cable do not experience this problems.
2. I am not sure about this, but after using the firmware built in "Reboot" button, the router reboots correctly. But for some reason, it is instable afterwards. It is operational for a few seconds but then reboots again. It keeps cycling. I could stop it by switching the router off and on again.
Cisco Firewall :: ASA5520 Unit Not Accessible On Network For Initial Configuration
Dec 15, 2011We received an ASA5520-K8 through Cisco's Loan program so we could demo it as a replacement for our aging Cisco 3005 VPN appliances. Given that we are a non Cisco shop (except for specific appliances like concentrators and wireless access points), I don't have a great deal of experience with Cisco gear.I started to set to setup the appliance this morning but immediately ran into issues. The 5520 doesnt seem to be acting as a DHCP server, and worse yet, I can't access the unit even if I hard code the IP on the PC being used for configuration. I have to say that I feel kinda stupid having to post this, since I actually followed the documentation avaiable for this menial task and I fully expect the problem to be a simple one. Namely, I am using two specific sources of info for connections.
View 20 Replies View RelatedNetgear CVG824G - UnPn Device Accessible Via Public IP When On Internal Network Only
Mar 26, 2012setup my Foscam IP cam lastnight on the Wireless network using UnPn and was able to access it fine via the public IP , using another PC on the same network with no issues. However when I tried to access it from work it doesnt connect - Is there a firewall setting that im overlooking?
FYI im using a Netgear CVG824G
Cisco AAA/Identity/Nac :: 4.8.2 / McAfee Antivirus Automatic Remediation?
Jan 3, 2012I'm having an issue with McAfee Antivirus remediation. I'm using Cisco NAC 4.8.2 and it seems that automatic remediation is not working.Is there a webpage where we can check which AV can do automatic remediation?
View 1 Replies View RelatedSecurity / Firewalls :: Antivirus Blocking Internet / Can't Browse Web Via Firefox
Sep 15, 2011I am having some trouble with the antivirus software.I had AVG antivirus installed but I thought it was causing some problems.So I unistalled it and downloaded a trial version of Bitdefender.Got it installed and found out I can't browse the web via Firefox. So I was trying to go through all the settings in Bitdef. but no luck.Uninstalled BD, rebooted the comp, still no internet. I did clean the registry and spyware as well.But the weird bit is that somehow I can browse the internet using old IE8 (64bit only. 32bit is not working?).I was also trying to re-install AVG but it could not complete as the connection with their server was blocked.It seems like something is blocking everything apart from 64bit ver. of IE8.
View 6 Replies View RelatedInstalled D-Link No Network Adapters
Jul 31, 2011I just installed a fresh copy of XP on an old Dell E310 my wife and kids use. Just an FYI, I used D-link prior to the re-install with no issues for a few years. Anyway, after XP was up, I put the D-link drivers on. The internet came up and worked like normal for 5-10 minutes, then 'poof', gone. Each time I attempted to connect after that I got a warning message stating I do not have network adapters? I was under the impression that is what D-link was?
View 1 Replies View RelatedRe-installed Windows XP Pro On Cpu Can't Connect To Internet Or Network?
Dec 27, 2011I just re-installed Windows XP Professional on my Dell XPS Gen 4. Everything works fine on it but the internet. I can open IE, but it just says "This page cannot be displayed" and on and on.Since I re-installed it I believe their are not many drivers on it, I don't really know, and I think that might be it but I am not sure. And I am not sure which drivers I need if it is missing drivers.
View 7 Replies View RelatedAdded Network Printer But No Scanner Installed?
Feb 8, 2011I added the network printer cum scanner - cm1312, going to control panel >> add printer >> etc. etc. Now I can print. But there is no scanner installed. What I can do?
View 5 Replies View RelatedIBM Levono R52 1860 - Network Driver Not Installed
Nov 23, 2012I have 2 IBM Levono R52 1860 Laptops, both are running windows XP Pro, one has Intel PROSet Wireless WiFi that works perfectly. I installed PROSet Wireless on the other one and it won't work. It tells me that the network driver is not installed If I go to C:/programs, etc. the driver is in the folder. in device manager under Network adapters it shows Broadcom NetXtreme Gigabit Ethernet( which won't connect to my WiFi either) and PdaNet Broadband Adapter that will connect it to the net via my phone and a cable??
View 8 Replies View Related