Cannot Ping System But Network Accessible
Jun 29, 2012Cannot Ping System but system can ping everyone on the network accessible
View 2 RepliesCannot Ping System but system can ping everyone on the network accessible
View 2 RepliesI have a DVR system. Which is configure in DMZ on my firewall. DVR internal IP is 192.168.2.13 and external IP is 27.34.xxx.xx. when I am able to access DVR by using internal IP and it works fine while accessing from the internet it not work proper. Though it prompt for username and password also. After enter the login credential its getting blank. I am able to telnet External IP from internet on port 80.
View 1 Replies View RelatedWe have many CT/MRI etc. machines and Servers in the Hospital LAN. Now intermittently we are loosing the LAN connectivity i.e we are not able to ping any system from any node inside the hospital network for sometimes, after some time it will start working and then again it will stops again.We are using procurve switches and also we are not using any router
View 2 Replies View RelatedI have strange problem I am using my static ip system since two year, I dont have issues so far, since two days I am facing a strange issue when I am piging my system I could able to see reply,
but when I am trying to connect via MSTSC..blank screen even I am unable to get login screen also...
I have tried to connect to log mein and team viewer all are having the blank screens
I was trying to connect my computers on a home network so that I can access either one via the other.When I try however I get the message:
"***-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
long failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a police restriction has been enforced.
That is the message from computer 1 to computer 2.
Computer 2 gives me the message:
Windows cannot access \***-PC
Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.
I have a fairly simple wireless home network. My main desktop machine is running XP Pro, and our family laptop is running XP Home. The laptop shares the My Documents folder for 2 of the 3 profiles. One of them works as it should. It is visible and accessible on the main desktop machine, but the other share is visible but NOT accessible. I get the following error message when I try to explore it from the main desktop machine:
<the share name> is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
Access is denied.
I'm not sure when this started, but remember that the other folder being shared is working just fine. I've double and triple checked the settings, share names, and basically anything I could possibly mistype. I've restarted both PCs, and refreshed the network explorer via both the file explorer and My Computer dialog. The My Computer dialog refresh the shares for some reason that the explorer wouldn't, but I'm still denied access to that one share on the laptop.
I have a router-based home network in which the desktop running XP media center is connected by cable to the router. There are 2 wireless laptops, one running XP home and the other Windows 7.The laptops can talk to each other, and the desktop can talk to the laptops.But I cannot access the desktop from the laptops. I can see the (shared) folders, but when I click on one I get the message: "You might not have permission to use this network resource..Not enough server storage is available to process this command." One solution suggested in several places is to change the IRPStackSize to 15. However, if I start the desktop in safe mode with networking, I can access the files.I can also access the machine using remote desktop.One extra frustration is that this is a problem that has happened relatively recently. It used to work OK.
View 8 Replies View RelatedI flashed my router to DD-WRT, but I could not access the web UI which is suppose to come on typing 192.168.1.1 in the web browser. . It used to come fine before but I reflashed to Asus Firmware but now I cannot access it. I have tried several times to flashing it to Asus Firmware and Back to DD-WRT, but it didn't work. When I flash to ASUS everytime my old settings are still the same. I tried assigning a static IP also.
View 1 Replies View RelatedI have a network with aprox 150 workstations (90% windows XP profesional, 10% Windows7 32 or 64 bit), and I receive from time to time this message ONLY on windows XP workstations:" Workgroup is not accessible.You might not have permission to use this network resource" All the time I could access the various workgroup computers by entering their IP like \192.168.1.5 or \mikepc All the time i can ping any of the workstation without any problem.All the time using Search computers on the network I find computer name.
View 1 Replies View RelatedMy desktop is not accessible from my laptop in my home network. This seemed to happen all of a sudden.Contact the administrator of this server to find out if you have access. PS: I can access the laptop from my desktop.
View 14 Replies View RelatedI have a Dell D830 that was given to me. I bought a new hard drive and restored the operating system to XP. I can't access the internet now through my wireless network at home. I've tried to setup a new connection in the network connection but that's there is nothing to connect to, nothing is working.
View 3 Replies View RelatedMy network drive is not working if i install antivirus. It shows 'access denied". if I uninstall, i can access the network drive.
View 3 Replies View RelatedInternet access is working fine, however I cannot get my computers to work on the network therefore cant share any files or play any network games. The router is set up as DHCP server therefore IPs are automatically assigned, this is setup on the PCs and the router. The work group is also set. Exactly same settings basically as my old router which worked fine but wont on this one! I have 3 wired PCs and a wireless laptop. 2 PCs are windows XP the other is Windows 7 and the laptop is windows 7. The wireless win7 laptop will recognize my win7 wired PC and vice versa and can share everything without problems, but they wont have anything to do with the wired winxp PCs, on top of that the 2 winxp wont recognize each other either so don't think its anything platform specific. I have also tried setting up static IPs for each computer - still no joy.This is a brand new D-Link DIR-655 Rev B1 firmware 2.00
View 3 Replies View RelatedI recently change routers to a Linksys E3000 wireless router from a Uverese 2wire residential gateway and all worked well for a short time nothing changed however when I go to view network devices from Win7,Vista or XP computers the network devices are no longer there. when I shut down and reboot the router and switches I still cannot see these devices, however when I hook up my old 2wire router I see my devices again. Even when I reconnect to the E3000 all the devices can be viewed for a few hours. Changing routers resets something but maybe overloads the linksys E3000 after a few hours? maybe this E3000 is just defective?
When I view a network map in Network & Internet all the devices appear in the map The configuration is Linksys E3000 router with two (2) 8 port Trendnet gigabyte switches and One (1) 8 port Trendnet Poe 10/100 switch. They are chained router to 8 port gig to 8 port gig to 8 port Poe 10/100. Prior to this I had the router to each switch separately - - this does not seem to matter works the same either way
Devices attached - Network printer,XP desktop, Vista Desktop, NAS, WDTVlive media player, Roku, Home automation controller, IP touch screen for the automation, security DVR (wireless devices are all ok Win7 laptop, Vista laptop, Ipad)seldom are more than 3 devices being used at one time light traffic.)
I just got my dad's old notebook (VAIO VPC F223FB) which is better than my older one. So, I did a backup and then managed to clean install a Windows 7 Professional x64.At first I had a problem with the drivers, because the internet wasn't connecting and the USB ports weren't detecting my External Drive. So, I tested other USB port and got it. Installed the drivers and I could connect to the wireless network. But it doesn't detect the ethernet cable! And I want it detecting because then it's faster. I already tried downloading the Ethernet Controller driver. At first, I downloaded through Sony's support site but it didn't recognize the driver. Now, it recognizes but still doesn't connect it. And when I tried Solving Connection Problems, it said the network gateway was accessible but Windows can't receive Internet network traffic.
View 5 Replies View RelatedI am facing a problem with Cisco ASA remote access VPN, the remote client is connected to VPN and receiving IP address but the client is not able to ping or telnet any internal network.I have attached running configuration for your reference.
-FW : ASA5510
-Version : 8.0
Site to Site VPN is working without any issues
I am experiencing one, possibly two problems with the X3000, firmware release v1.0.03:
1. When enabling guest mode, the internal network is not accessible via WLAN even for clients NOT connected via guest mode but regularly: Even non-guests but regularly connected clients can't access any internal IP but the router itself. netscan shows only the very client's IP and the router's. Only after switching guest mode entirely off, regularly connected clients can access interal IP again. netscan correctly shows the whole network. Obviously a firmware bug. BTW: Clients connected via cable do not experience this problems.
2. I am not sure about this, but after using the firmware built in "Reboot" button, the router reboots correctly. But for some reason, it is instable afterwards. It is operational for a few seconds but then reboots again. It keeps cycling. I could stop it by switching the router off and on again.
We received an ASA5520-K8 through Cisco's Loan program so we could demo it as a replacement for our aging Cisco 3005 VPN appliances. Given that we are a non Cisco shop (except for specific appliances like concentrators and wireless access points), I don't have a great deal of experience with Cisco gear.I started to set to setup the appliance this morning but immediately ran into issues. The 5520 doesnt seem to be acting as a DHCP server, and worse yet, I can't access the unit even if I hard code the IP on the PC being used for configuration. I have to say that I feel kinda stupid having to post this, since I actually followed the documentation avaiable for this menial task and I fully expect the problem to be a simple one. Namely, I am using two specific sources of info for connections.
View 20 Replies View Relatedsetup my Foscam IP cam lastnight on the Wireless network using UnPn and was able to access it fine via the public IP , using another PC on the same network with no issues. However when I tried to access it from work it doesnt connect - Is there a firewall setting that im overlooking?
FYI im using a Netgear CVG824G
I have setup a network of 5 windows xp systems. All the systems can access one another except for one system which cannot access any other system although it can see the other systems in the workgroup. It can ping to all the systems.The error message is \computer is not accessible. You might not have permission to access this network resource. Contact the administrators of this server to find out if you have access permissions. Th server service is not started.But i checked that the service is running on all the systems.
View 7 Replies View RelatedThis is happening to me to multiple computers on my domain. When it happens i can only log in as a local user or if I unplug the network cable, log in and then re-connect the networkThe time on all these machines is correct within at least 1 minute but still it's throwing off this error. When reading about this problem I see many fixes that all relate to how to sych the time on the PC.
View 1 Replies View RelatedActually i have a small network of 4 and 5 computers. i am sharing internet via lan not ICS.there are some computer showing me in my network places coz i am using windows 7 and the other computers have same window. i can ping their computers by name and by ip add, which is assigned by DHCP. i can see thir MAC address. can i access their computer i mean their data or something else. i don't know that this is the right place to share such information or not.
View 14 Replies View Relatedi have 2 system in same network connected in same switch sys-1 have internet access & sys-2 no internet blocked from fire wall,....Now i want to use internet on sys-2 through sys-1 without Proxy or lancard sharing...
View 3 Replies View Relatedmy system ip not able to ping by other system in my company network but my system is in the network and able to ping other system in the network my system IP have static IP and IP is pinging on by server
View 1 Replies View RelatedI've been getting a popup error message for about a week:"There is an ip address conflict with aother system on the network". This is only for 2 desktop PCs with wired ethernet connections. Wireless devices are fine with no error message. The wired LAN PCs basically lose all network capability. Reboot fixed it, but it returned every time it was rebooted.I have a Virgin Media Superhub with another router configured as an access point. To cut a long story short, after trying to reset everything, re-installing network adapters & swapping ports, I decided to set the Superhub to Modem Mode, and re-configure the access point router to act as a standard wireless router. In other words renewing the whole network's LAN IP addresses.I now don't lose network capability, but the error message is still appearing on both wired LAN PCs. I use the Fing app on my android phone which lists IP addresses for all devices on the network, wired and wifi, and no 2 addresses are the same, which suggests that DNS is doing its job.
View 3 Replies View RelatedI want to control a system through a communication network (means sending and receiving data through network from system to controller and controller to actuator), but I do not know how I can do this?
View 1 Replies View RelatedAlright, first off a little background. Im recent IT graduate (last spring) but not yet working in the field in any official capacitance. Its been about a year and half since I had my last Cisco class. Right now Im in the beginning process to work with locally own retailer setup a network infrastructure for IP camera and in the future VoIP, about 45 50 total IP devices when the project is complete.Nothing has been purchased yet but I have some candidates and a network layout planned, thought this is the first time Ie setup network of this type in the real world.Right now I looking at Netgear and LG/Ericsson (previously SMC, Nortel) switchesHavent gotten to the router yet and VoIP will come later.For either brand there would be one 1000MB 24 port switch and three 100MB switches, all of them 24 port and all will have PoE on all ports.[CODE]
View 4 Replies View RelatedI'm trying to find some 4 ports network cards to add to my system but can't seem to find one that works.
I have an abit IP35-E motherboard
3 PCI slots (32 bits 5v)
2 PCI-e x1 slots
The only NIC I found are PCI-E x4 and PCI-X. I have been reading and some website said that PCI-X card doesn't work with PCI slots and some said it works but just at a lower speed.Where and how are guys are adding Network cards into your system?
I am trying to open internet through wi-Fi but my system is asking for network security Key and I am unable to find it out.
View 3 Replies View RelatedJust built my new system and when I installed my network card drivers and utilities, a message comes up ASUS Wireless LAN card is taken apart from your desktop PC.
View 1 Replies View RelatedIn my home We have 3 pcs.
1. my personal PC1
2. home or general PC2
3. wireless PC (not important here.)so PC1 and PC2 are connected directly to internet via this [URL] modem router. I have full control over everything and I did setup the whole thing.We have a limited bandwidth internet plan, but a lot of bandwidth is easily used up by PC2.I want to limit the speed of internet access on that PC2 so that downloading becomes impossible or difficult.
I am redoing my homes networking and I am looking for a firewall. I heard that you can install clear os on a server and use it as a firewall and a dhcp server. So i was going to install it on a rack in my server cabinet. does the server need to have a wan port and a lan port? Or how does the server get connected? So, so far its the cable modem into the clear os firewall and then into my switch. Is is possible to use the clear os server as the dhcp server for the whole house? From the switch I am going to connect the rest of my servers, and the rest of the house. I was going to connect two wireless routers for my house. Would that work with the clear os server?
View 2 Replies View Relatedme and my cousins have bought a router and we want to start a network sharing system
View 1 Replies View Related