System Asking Network Security Key For Wifi Internet
Mar 17, 2012I am trying to open internet through wi-Fi but my system is asking for network security Key and I am unable to find it out.
View 3 Replies
ADVERTISEMENT
Linksys WRT610N Wireless System With WPA-PSK Security / Security Settings Does Not Match
Mar 29, 2012I have a Linksys WRT610N wireless system with WPA-PSK security and this works fine with several computers but now one computer detects the wireless security as WEP and can thus not connect to the router. I have tried to manually connect to the router with correct security WPA-Personal (TKIP) and correct password but then the computer says "settings saved on this computer for the network do not match the requirements of the network".How can I get the computer to detect the correct security? The computer is running Windows 7 home premium.
View 7 Replies View RelatedHome Network :: Internet Through Other System?
Sep 19, 2011i have 2 system in same network connected in same switch sys-1 have internet access & sys-2 no internet blocked from fire wall,....Now i want to use internet on sys-2 through sys-1 without Proxy or lancard sharing...
View 3 Replies View RelatedLimit The Internet Speed Of One System In Home Network?
Jan 31, 2012In my home We have 3 pcs.
1. my personal PC1
2. home or general PC2
3. wireless PC (not important here.)so PC1 and PC2 are connected directly to internet via this [URL] modem router. I have full control over everything and I did setup the whole thing.We have a limited bandwidth internet plan, but a lot of bandwidth is easily used up by PC2.I want to limit the speed of internet access on that PC2 so that downloading becomes impossible or difficult.
How To Set Up Security On My Wireless Links System
Nov 24, 2012I have a links wireless system, I am trying to make this a secure connection. I have gon into the property settings and everytime I try to set the security to wpa2 or even wpa it I lose my internet connectivety. I can't get the security key needed.
View 1 Replies View RelatedCisco Security :: Clone XP System With CSA 6.0.2?
May 24, 2011Can I clone an XP system with CSA 6.0.2 installed? I saw the document about 5.x, but I was wondering if that had changed for 6.0.2.
View 1 Replies View RelatedCisco :: Port Forwarding For Security System?
Apr 17, 2011One of our clients just installed a new security system and they need to be able to view the cameras from outside the network. According to the vendor, we should only need ports 81 and 2000 forwarded to the internal DVR on both TCP and UDP. They really aren't much troubleshoot the network config.
ASA Version 7.2(4)
!
hostname ciscoasa
domain-name ********
enable password ******** encrypted
passwd ******** encrypted
[code].....
Add Another Laptop To Wireless System - Security Key Required?
Dec 11, 2011I have Wi-Fi on my smartphone and I want to set up another lap-top and it is asking for a security key, where do I find it ?I already have one lap-top set up !
View 1 Replies View RelatedConnect My Wireless Security System To D-Link (DCM-202) Router?
Sep 4, 2011I have an older D-Link DGL-4300 wireless router, I've purchased a wireless home security system and can't seem to get the 2 connected. I've tried resetting the router & modem (powering down & waiting from 1-5 minutes), and my router just won't read the port that I've plugged the security system ethernet cable into.I think the problem is my firewall but I don't know how to set it to allow the router to read the port that I've plugged into, or it could be the firewall that my anti-wirus has or possibly both.My equipment is Comcast cable, router (as noted above) and a D-Link DCM-202 modem, Windows XP 3, and Norton anti-virus. Now I also have my phone through Comcast and it has it's own modem.
View 7 Replies View RelatedSecurity / Firewalls :: NT Kernel System Blocked Announcements
Apr 22, 2013I keep getting a pop-up message from my firewall ( Sygate personal -free ) telling me that NT Kernel and system has been blocked. I checked the box to say don't show this message again, it still shows it every time. minutes in between. It freezes my pc and screws up any typing i'm doing at the time. According to the application list it is checked to allow and running.It is not listed in Task Manager.
View 3 Replies View RelatedBelkin Routers :: N600 - Security System Is Not Working
Nov 1, 2012A N600 Router Model F9J1102v1 router first installed in July 2012 with WPA-PSK, MAC Address Filtering and "Self Healing" enabled would not allow a new PC to connect via an RJ45 port. Belkin support ask for the unit to be reset to factory settings which is done and the Security system re-enabled again. Valid MAC Addresses start to be added and midway a PC is discovered in the Network without its MAC address added. Closer scrutiny reveals that another unknown device has also found a way into the router and that the 'Block' option on the MAC list is also failing to work. Anyone think of what one should do with this security shambles other than turn the thing off quick?
View 7 Replies View RelatedSecurity Camera System - Convert Cat5 Ethernet To Wireless?
Aug 21, 2011I'm building a security camera system,which can connect to internet to be viewed from away.The camera receiver connects to the modem with a Cat 5 ethernet cable,which results in a cable running across the room. My modem is a wireless type,but the camera receiver only has cable support it seems.
Is there a device that I can use to get rid of the Cat5 cable in this scenario?
Linksys Wireless Router :: Wrt54gl / How To Change Security On System
Dec 25, 2011I need to change how my security is set on my wrt54gl... it has been so long I don't know the name or password I put it under.
View 1 Replies View RelatedHow To Convert Local Lan Connection In Wifi System
Jun 20, 2011How to convert local lan connection in wireless connection.
View 1 Replies View RelatedSetup Wifi Access System In A College
Dec 13, 2011My task is to plan out on how to setup a WiFi Access System in our college.There are more than 3000 users which include students, faculty, etc.Area is spread across almost 1 acre of land area.
Q1. How do I go about setting up a system where MAC based WiFi Access system is achieved?
Q2. What equipment will be needed, like routers, access points, etc.?
Q3. How many Access Points will be required, and which will be the best in terms of cost, range, speed and performance.
Q4. Which would be the best equipment for this?
Q5. User management solution?
How To Find Security Key For Internet Network
Oct 21, 2012i want to find security key of my connection
View 1 Replies View RelatedRandom System Hangs Caused By Wifi Adapter
Nov 1, 2012Two years ago, a lightning strike fried my ADSL router and LAN port on the motherboard (ASUS A7V8X-X) of my now very old system. After that, I bought a Wi-Fi USB adapter (AirLive WL1600-USB) and disabled the fried LAN port. Since that moment, my computer kept freezing totally randomly for the past two years - it didn't matter whether I run a dozen of programs or simply leave the system alone. First I didn't know what's causing those freezes, until a week ago. You see, we were forced to cancel our ADSL account for four months, so I haven't used that Wi-Fi adapter for the entire summer (I disconnected it and uninstalled its drivers). During that time - not a single freeze for four months, no matter how great the system load or temperature. A couple of weeks ago, we activated our ADSL account again, so I plugged the Wi-Fi adapter in and installed its drivers - and the freezes started again.
View 3 Replies View RelatedNetwork Security Key To Lock Wireless Internet?
Nov 15, 2011I just hooked up my wireless internet yesterday and I wanted to lock it so no one can use it like the neighbors and when I click on it just now, it asks for the network security key and cant find or even remember and dont know what this is?
View 1 Replies View RelatedNetwork Security Key Required For Internet Connection?
Feb 16, 2012Just got a new laptop which is requiring Network Security Key to connect with Internet.
View 1 Replies View RelatedWireless :: Dell Inspiron Laptop Can't Log On Local Wifi System
Jun 23, 2011I tried to use the Dell on a local wifi system with no luck and now I've done something and can't log into the computer. I've tried every user name and password I can think of.
View 2 Replies View RelatedAcer Tablet Cannot Reconnect To (Wifi) After System Restored To Default
May 17, 2012I have been using my ACER tablet with my Netgear router for several months with no problems at all. Then last night I decided to restore my tablet to its default settings, meaning that all my programs, apps, files, etc., were erased. Then I rebooted my tablet and started from scratch, entering the requested information. Everything appeared to be going just fine until I turned on Wi-Fi and attempted to connect to my network (Secured with WPA2), which was available and showed Good signal strength. I clicked on it, then attempted to enter my password. As soon as I entered the first digit of my password, the option to Connect to the Internet immediately disappeared, becoming greyed-out. Repeated attempts to connect failed for the same reason.
I called ACER Level 2 Support and tried a couple of procedures which didn't solve the problem. One was pushing the Reset Button twice. The technician told me that I may have a problem with my router settings. He suggested that I go to a local fast food outlet and see if I could connect there. I went to McDonald's and was able to get on the Net without using a password. I returned home and tried again to connect, but still was unable to enter my password.
Would it make sense for me to completely disconnect my router from everything, then reconnect and go through that set-up process all over again? I guess I would have to change my User Name & Password, or whatever is required. Also, if I go this route, should I change my security setting from WPA2 to a different option -- WEP, for example? I just don't want to foul things up to the point where my laptop wouldn't work. I doubt that would happen. I recently received the Ice Cream Sandwich upgrade which has been working satisfactorily; however, it does mean that I'm now attempting to start over from scratch with a different operating system.
Linksys Wireless Router :: E3000 - No System Port And Wifi Led
Mar 21, 2012I've made an observation that the newer routers above my E3000 don't have LED icons to indicate the port is connected/active and also to show Wi-Fi is active? I find this good at a glance without having to go look in the back of the unit to see which ports are open etc.
View 1 Replies View RelatedForgotten Network Security Key To Connect To Wireless Internet
Jul 28, 2011I have forgotten my network security key to connect to wireless internet.
View 2 Replies View RelatedRouters / Switches :: How To Find The Network Security Key To Internet Modem
Jan 12, 2012How do I find my network security key for my cisco e1000 router if the computer that it is installed on is broken?
View 1 Replies View RelatedNetwork Security Key Required For Connecting Laptop To Wireless Internet?
Feb 9, 2011I am connecting my laptop to a wireless connection I am at connect to network. and enter network security key. do not know the security key
View 2 Replies View RelatedHome Network Fails After Uninstalling Norton Internet Security
Nov 12, 2012My Vista computer and my XP computer had been happily "talking" to each other, sharing files and printers. I got tired of paying $70 a year for Norton Internet Security, so I uninstalled it (using the Norton removal tool) and selected the Windows Firewall. I also installed Avast! and SuperAntiSpyware. Now neither computer talks to the other. When I run "\FamilyRoomHPOfficeJet" I get "Windows cannot access \FamilyRoomHPOfficeJet" . Check spelling, etc. Get error code 0x800704b3 "The network path was either typed incorrectly, does not exist or the network provider is not currently available..." What have I messed up by going from the Norton firewall to the Windows one.
[code]....
Wireless Home Network With Verizon Internet Security - Changing IP Address?
Dec 24, 2011I have verizon fios internet and a wireless home network with verizon internet security and I want to ghange my IP adress on my laptop
View 6 Replies View RelatedTp-link Dual-band Wireless :: Wdr4300 Can't Able To Recognize System /all Wifi Clients Lose Connection
Jan 22, 2013Region : Others
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : UPC Hungary Ltd.
I can't able to recognize a system - all wifi clients lose connection. When this happens, the ping answer time rech the ~2000 times, then totally lose the connection, the SSID is dissapear - checking with my phone (android - wifi analyzer) and TL-WN822N USB wifi adapter (with the inSSIDer application). Meanwhile the cable clients and the WAN connections works fine, didn't experience anything.If I restart the wifi service with the hardware on/off button, it runs well for some time.This problem appeared when I used the two older official firmware too.
I tried the auto-chanel function width auto channel width, tried to manually set up one of the less interfered channels with both 20MHz and 40MHz channel width, but none of them bring the solution.The intresting thing is, if I change the router with an old D-Link DI-604, the signal is weak, but the wifi connection is stable, with the same TL-WN822N adapter.I tried to guarantee the router, but after two weeks, my reseller said, it looks ok, they - at the TP-Link service - didn't find anything.
Home Network :: Netgear Router WNR 2000 V3 - Cannot Access Internet When Security Password Chosen?
Apr 13, 2013I just bought a Netgear Router WNR 2000 v3 and installed it. I got inside the router and could set up a Network Name and security key. However, I can not access the internet when I chose a security password using WPA 2, WPA-PSK + WPA 2 PSK, or WPA/WPA 2. It only accesses the internet when I chose None.( no secured ).At this time, my network is unsecured because there isn't way I can access the internet when I create a security key using the 3 options the router offers.
Note : I have tried the 3 security options creating a key number and my computer connect to the wireless network but don't access the internet. It only access the internet when I select None ( no secured )
Security / Firewalls :: Sonicwall Network Security Appliance - Receiving A Content Blocked Message?
Dec 24, 2011I'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
Security / Firewalls :: Connecting To A Security-enabled Wireless Network?
Jan 19, 2013I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies View RelatedWifi Connected But No Internet And Unidentified Network
Aug 30, 2012i just recently moved my computer to a new house the wifi adapter is picking up the correct wifi and connecting to it but not accessing the internet there is also no network access. i completed an ipconfig/all the details are below.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersKate>IPCONFIG/ALL
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kate-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code].....
Two Wifi Routers On One Network Dropping Internet Connection?
Oct 17, 2011I have two wifi routers which I have connected together with an ethernet cable to extend coverage across my house. The ethernet cable is connected to a LAN port on the first router and the internet port of the second router. This works fine and creates a second network that I can connect to the net on. The problem iseemingly randomly, about every 15 minutes, the second router will lose internet connection. My laptops and phone still stay connected to it, but windows lists it as having no internet connection. If I then wait a couple of minutes and reconnect, internet will be working again.
View 4 Replies View Related