Cisco Security :: Clone XP System With CSA 6.0.2?
May 24, 2011Can I clone an XP system with CSA 6.0.2 installed? I saw the document about 5.x, but I was wondering if that had changed for 6.0.2.
View 1 Replies
ADVERTISEMENT
Linksys WRT610N Wireless System With WPA-PSK Security / Security Settings Does Not Match
Mar 29, 2012I have a Linksys WRT610N wireless system with WPA-PSK security and this works fine with several computers but now one computer detects the wireless security as WEP and can thus not connect to the router. I have tried to manually connect to the router with correct security WPA-Personal (TKIP) and correct password but then the computer says "settings saved on this computer for the network do not match the requirements of the network".How can I get the computer to detect the correct security? The computer is running Windows 7 home premium.
View 7 Replies View RelatedCisco :: Port Forwarding For Security System?
Apr 17, 2011One of our clients just installed a new security system and they need to be able to view the cameras from outside the network. According to the vendor, we should only need ports 81 and 2000 forwarded to the internal DVR on both TCP and UDP. They really aren't much troubleshoot the network config.
ASA Version 7.2(4)
!
hostname ciscoasa
domain-name ********
enable password ******** encrypted
passwd ******** encrypted
[code].....
How To Set Up Security On My Wireless Links System
Nov 24, 2012I have a links wireless system, I am trying to make this a secure connection. I have gon into the property settings and everytime I try to set the security to wpa2 or even wpa it I lose my internet connectivety. I can't get the security key needed.
View 1 Replies View RelatedSystem Asking Network Security Key For Wifi Internet
Mar 17, 2012I am trying to open internet through wi-Fi but my system is asking for network security Key and I am unable to find it out.
View 3 Replies View RelatedAdd Another Laptop To Wireless System - Security Key Required?
Dec 11, 2011I have Wi-Fi on my smartphone and I want to set up another lap-top and it is asking for a security key, where do I find it ?I already have one lap-top set up !
View 1 Replies View RelatedConnect My Wireless Security System To D-Link (DCM-202) Router?
Sep 4, 2011I have an older D-Link DGL-4300 wireless router, I've purchased a wireless home security system and can't seem to get the 2 connected. I've tried resetting the router & modem (powering down & waiting from 1-5 minutes), and my router just won't read the port that I've plugged the security system ethernet cable into.I think the problem is my firewall but I don't know how to set it to allow the router to read the port that I've plugged into, or it could be the firewall that my anti-wirus has or possibly both.My equipment is Comcast cable, router (as noted above) and a D-Link DCM-202 modem, Windows XP 3, and Norton anti-virus. Now I also have my phone through Comcast and it has it's own modem.
View 7 Replies View RelatedSecurity / Firewalls :: NT Kernel System Blocked Announcements
Apr 22, 2013I keep getting a pop-up message from my firewall ( Sygate personal -free ) telling me that NT Kernel and system has been blocked. I checked the box to say don't show this message again, it still shows it every time. minutes in between. It freezes my pc and screws up any typing i'm doing at the time. According to the application list it is checked to allow and running.It is not listed in Task Manager.
View 3 Replies View RelatedBelkin Routers :: N600 - Security System Is Not Working
Nov 1, 2012A N600 Router Model F9J1102v1 router first installed in July 2012 with WPA-PSK, MAC Address Filtering and "Self Healing" enabled would not allow a new PC to connect via an RJ45 port. Belkin support ask for the unit to be reset to factory settings which is done and the Security system re-enabled again. Valid MAC Addresses start to be added and midway a PC is discovered in the Network without its MAC address added. Closer scrutiny reveals that another unknown device has also found a way into the router and that the 'Block' option on the MAC list is also failing to work. Anyone think of what one should do with this security shambles other than turn the thing off quick?
View 7 Replies View RelatedD-Link DIR-615 :: How To Do Mac Clone To Change IP
Jun 2, 2011how to do Mac cloning on a Dlink Router, I know I have to go to 192.168.0.1 admin page but from there, I dont know anything. I wanna clone my mac address so I can change my ip address. After I clone it, then what do I do to change my IP? Please dont say stuff like you dont need to mac clone to change IP. Mac cloning seems to be the only way to change my IP. EDIT: I changed my Mac, cloned it. Then I resetted my router but the I couldnt surft the internet anymore. I had to change back to my old MAC to get internet back.
View 1 Replies View RelatedSecurity Camera System - Convert Cat5 Ethernet To Wireless?
Aug 21, 2011I'm building a security camera system,which can connect to internet to be viewed from away.The camera receiver connects to the modem with a Cat 5 ethernet cable,which results in a cable running across the room. My modem is a wireless type,but the camera receiver only has cable support it seems.
Is there a device that I can use to get rid of the Cat5 cable in this scenario?
Linksys Wireless Router :: Wrt54gl / How To Change Security On System
Dec 25, 2011I need to change how my security is set on my wrt54gl... it has been so long I don't know the name or password I put it under.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: Cloned ACS 5.2 But Clone Does Not Authenticate
Jan 16, 2013I'm having an issue with a cloned vm of our ACS. We are moving it to a different location. I was able to clone it and get it back on the network, but I can't authenticate to it from any of my switches. I do have an older version:5.2.0.26
View 2 Replies View RelatedNeed To Clone ISP Furnished DSL Arris Modem
Apr 5, 2012I have an arris modem from the ISP company and it works good, bat it is NO wireless model. So I have purchased arris WITH the wireless capability myself and ISP refused to support it so my guess that I need somehow to clone their old modem to my new one.
View 4 Replies View RelatedCannot Clone Laptop To HDTV Via Wireless Hdmi
Mar 17, 2013i am connecting my laptop pc to my hdtv via a wireless gizmo. the gizmo has a dongle transmitter connected to the pc via the hdmi port and the usb port for power, on the receiver hdtv end the receiver box connects to the hdtv through the hdtv hdmi port and to the a/c power on the wall, all this is to replace a hdmi to hdmi cable connection. i hope i,m clear so far. now i want to clone my pc screen to my hdtv screen i.e. i want to see the exact same image or video on both my pc screen and on my hdtv screen and here lies my problem, as i stated in my original post, i am unable to do so using the fn/f8 keys or the microsoft key/p options i have on my pc keyboard. using these keys i can see a video on either the pc laptop screen or on the hdtv screen but not on both at the same time which is what cloning or duplicating means? the internet posts related to this issue recommend using my nvidia control panel to achieve cloning, i have also tried that approach with no sucess because when i go there, i do not have choice for cloning, it seems it doesnt recognize or detect a second monitor?
View 9 Replies View RelatedLinksys Wireless Router :: Can Clone E4200v2 Configuration To Another One?
Apr 12, 2012With other devices, including Cisco Aironet, I've saved a lot of time in the past by cloning the config from one WAP to another. This is for when I have to set up 2 or more WAP's on the same network, that share 98% of the same settings.I was wondering if anyone's ever tried to do this with Linksys devices, and in my case two E4200v2's in bridge-mode (WAP-only). Will it let you Restore a config that came from a different device? (same hardware version of course)Obviously I would change the hostname, devicename & IP address to make them unique. But the rest of the settings would basically stay the same.
I'm talking about E4200's that are being used as bridge-mode access points, and so typical router functions like DHCP server are disabled on both.
Linksys Wireless Router :: 6500 - DHCP Server And NAT Clone
Oct 12, 2012I have the ea6500 and was wondering what the DHCP server is for? I turned it off and everything seems to be able to connect without it. Am I missing something? Also, when I disable clone my pc's MAC addy, I can't connect to the internet. (My computer is hard wired to the router).
View 6 Replies View RelatedCisco Security :: Finding Security Labs For GNS3 Or Packet Tracer?
Dec 19, 2011I'm studying for CCNA Sec exam and looking for any security labs for GNS3 or Packet Tracer.
View 3 Replies View RelatedCisco Security :: Configure 802.1X Security Through ACS 1120 Server And NAC In Layer 2 Inband Virtual Gateway?
Feb 28, 2011My company ordered NAC and ACS 1120 My question is Can i configure 802.1X security through ACS server and NAC in layer 2 Inband Virtual Gateway.for campus switches.Is it the good design to have double security for switch ports. 1st is 802.1X and 2nd is NAC in layer 2 INBAND VG?
View 1 Replies View RelatedCisco Security :: How Many Default Context In ASA 5510 Security Plus Edition
Aug 8, 2006ASA 5510 security plus edition will it support active/active failover. and does it support context with securiyt plsu edition. and how many default context do we get with asa 5510 security plus edition.
View 3 Replies View RelatedSecurity / Firewalls :: FCC Is Investigating Pogo Game Site Because Of Poor Security
Mar 24, 2013Is it true that the FCC is investigating the Pogo game site because of poor security? Is Java the cause of this problem?I'm very leery of getting on the Pogo site because I've been told that my computer could get a virus and crash.
View 1 Replies View RelatedSecurity / Firewalls :: Sonicwall Network Security Appliance - Receiving A Content Blocked Message?
Dec 24, 2011I'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
Security / Firewalls :: Connecting To A Security-enabled Wireless Network?
Jan 19, 2013I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies View RelatedSecurity / Firewalls :: Install Microsoft Security Essential On PC?
Sep 15, 2012I want to install Microsoft Security Essential on my PC, but I am not sure which download I need. One says amd64 and the other is x86. I am using windows xp 32bit.
View 2 Replies View RelatedSecurity / Firewalls :: Security Tools And Techniques For Wireless LAN?
Apr 20, 2013Some security tools and techniques for wireless LAN??
View 1 Replies View RelatedCisco Security :: ASA IOS 8.3 Local CA Security Vulnerability?
Apr 9, 2011I was informed by a co-worker that there is a security vulnerability with the local certificate authority in the ASA running 8.3 code. I've looked through the security advisories and haven't been able to find anything about this. Was this just misquote or am I missing the security advisory release?
View 1 Replies View RelatedCisco Security :: ASA 5505 Security Plus Licensing?
May 24, 2011I have a ASA 5505 that I test with which originally came with the Security Plus license. I recently erased flash and loaded the latest asa841-k8.bin version of IOS along with asdm-642.bin. Everything booted fine and came up as it does when freshly wiped however I noticed that i was now only running a base license. If I issue the sh activiation-key command, I noticed the following messages (full output is at the bottom):
The Running Activation Key is not valid, using default setting
......
This platform has a Base license.
......
Failed to retrieve flash permanent activation key
Did I somehow kill my Security Plus licensing when I did the erase flash? If so how do I recover it?
ciscoasa# sh activation-key
Serial Number: JMXXXXXXHU
Running Permanent Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
The Running Activation Key is not valid, using default settings:
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Restricted
Dual ISPs : Disabled perpetual
VLAN Trunk Ports : 0 perpetual
[code]...
This platform has a Base license.Failed to retrieve flash permanent activation key.The flash permanent activation key is the SAME as the running permanent key.
Security / Firewalls :: Get Security Key Password For My IPad?
Jun 10, 2012How can I get the security key password for my iPad?
View 2 Replies View RelatedSecurity / Firewalls :: Security Update Keeps Trying To Install
Dec 28, 2011I have windows xp home and the last few days a security installation has kept trying to install ie: "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) (update 1 of 1)..."
View 3 Replies View RelatedRouters / Switches :: How To Change WPA Security To WEP Security
Aug 22, 2011my router has a WPA security system and I want it to be a WEP security system, what must i do?
View 7 Replies View RelatedXp System - Not Able To Take RDP?
Apr 25, 2012I am not able to RDP from xp system
View 1 Replies View RelatedCisco :: IP Is Not Pinging By Other System In The Network
Aug 29, 2012my system ip not able to ping by other system in my company network but my system is in the network and able to ping other system in the network my system IP have static IP and IP is pinging on by server
View 1 Replies View RelatedCisco :: LMS 4.0.1 - Getting General System Settings?
Jul 14, 2011I have a situation, where I dont need email and where is no SMTP server in this network, but I need CCO-access for EoX/PSIRT from LMS. Because both settings are in the same menu and LMS4.0.1 does real TCP:25 checking for given SMTP-server before can apply, I cant save my CCO-credentials. What can I do?
View 1 Replies View Related
