I'm having an issue with a cloned vm of our ACS. We are moving it to a different location. I was able to clone it and get it back on the network, but I can't authenticate to it from any of my switches. I do have an older version:5.2.0.26
View 2 Replies
I have installed ACS 5.4 and we are looking to authenticate our Anyconnect users with ACS via Active Directory. I think I have the correct commands in our ASA ( we had ACS 4 and authenticated our anyconnect users ).
I also have configured ACS to use Active Directory and installed the server side cert in ACS. I'm just uncertain how to program ACS to use the security group that I have setup in Active Directory.
Having an issue with Macbook authentication. All Macbooks at this one site, on same switch, going to same RADIUS server, work except for one. Looking at logs it appears server and client never exchange certificates. Attached is log for failed Macbook authentication.
View 4 Replies View RelatedI think i've got everything set up to authenticate against AD for Tacacs+ device logins. When i check the logs, i see:"24408 User authentication against Active Directory failed since user has entered the wrong password". This leads me to believe that it is checking AD correctly, however if i enter the password correctly for the same AD user, there is no log at all...no pass, no fail.
If i look at the Tacacs debugs on the switch, i see the following:May 25 10:55:07.927 CDT: TAC+: ver=192 id=874699084 received AUTHEN status = ERRORMay 25 10:55:09.932 CDT: TAC+: send abort reason=Unknown
Obviously the switch is communicating to ACS, and ACS is passing info back to the switch. ACS also appears to be communicating effectively with AD since it knows when i put in an incorrect password for the specific user.
we have deployed L3 in-band scenario for wireless 2 years ago and the solution was working without any problem. we have upgrade wireless controller to 5508, since then, when users login to the first page and certified, and they want to browse to the internet, NAC redirects the web page and ask for authenticatin again, despite the users' devices are being shown as certified devices in the list.
View 6 Replies View RelatedWe have remote users that dial-in over ISDN to a Cisco 2911. We have configured AAA to pass the authentication off to a RADIUS server. Once successfully authenticated, the router permits the users to access a single web server. However, we need to do some testing in our test environment, but unfortunately we don't have an ISDN line to test with. We have created a little environment in our LAB using a 2911, a switch, a RADIUS server & web server. I was hoping that we could simply create a "user" VLAN off the back of the 2911 to simulate our remote users, and access the web site from the test usr PC's over the LAN. I was hoping that the 2911 would be able to intercept the connection and pass the authentication off to the RADIUS server (as it does with the PPP ISDN traffic). But I cannot find anyway to do this, because I can only configure AAA to offload either PPP traffic or telnet/ssh connections to the router itself.
In summary what I want is for a user to access an internal web site over a LAN interface of a 2911 - but have the 2911 authenticate the user via a remote RADIUS server first. Is there a way to configure a 2911 (or any router!) to do this?Is the answer to configure port-based authentication (802.1X) on the switch?
I have setup Cisco Identity Service Engine (1.1.1) with Wireless LAN Controller (7.2.110)Everything is complete unless the URL redirect. My guest client can join the Guest SSID and also can authenticate to ISE.But after they success to authenticate with ISE, the URL in the browser doesn't change to the pre-configure. It still be something like [URL]. Anyway the content in the browser is changed to the URL that being configured such as url...How can I do with this situation cause everything is working fine but only the browser URL that is not change to the preconfigure one.
View 5 Replies View RelatedHave set up a pair of ACS 5.3 servers and have set up device administration authentication be passed through to an RSA server via RADIUS. All works great.
What we want to do is go a step further and set the system up so that ACS Administrators also have to authenticate to the ACS system by RSA via RADIUS (the same as the Device Authentication we've set up) for ACS administration tasks.
Looking at the options available in the ACS Administration setup (administrator accounts etc) there doesn't seem to be an option to authenticate via another method apart from a local administrator account on the ACS.
Is it possible to do this?
I have seen couple of people with win7 cannot authenticate to ISE: 12520 EAP-TLS failed SSL/TLS handshake because the client rejected the ISE local-certificate.I've thought of this: Maybe get a 3rd party cert (go daddy) and have that installed in ISE.I know i do have to make a CSR Cert.Sign.Request that matches cn=primary.ise.mydomain, would I also need a cert for secondary?
If I use LEAP as a preferred protocol then it doesn't ask for cert and users are authenticated successfully.I know they have to say do not validate cert and all that but sometimes it doesn't popupt to them they just can't get on.Again maybe going wtih 3rd party certs will make it easier while benefiting from using PEAP?
On an ASA5520 v7.2 I can only seem to authenticate to the console when using telnet and not ssh. I can connect using both methods, but just have trouble authenticating with ssh. Here are relevent lines related to the issue:
username user1 password ***** encrypted privilege 15username user2 password ***** encrypted privilege 15
aaa authentication telnet console LOCAL
aaa authentication ssh console LOCAL
telnet <my subnet> 255.255.255.0 Inside
ssh <my subnet> 255.255.255.0 Inside
I have an issue with an implementation, I had a ACS R5.1 that I'm using to authenticate the wireless users with 802.1x, that's OK and working fine. Now I want to use the same ACS to authenticate wired users using MAB (for IP phones, printers, servers, and other devices) and 802.1x (for corporate users). I already configured the authentication services (MAB and 802.1x) on ACS, but when I'm doing tests I can see that for example the phones are trying to authenticate using the 802.1x rules of wireless connection, not using the MAB rules. [code]
You could also see an screen from the ACS in the attached file. On the picture remark you could see a IP Phone trying to authenticate using the wireless Access Services insted of using MAB.
Having an issue with Cisco ACS v5.1.0.44 and the Cisco WLC 5508. Cannot get users to authenticate and keep getting error messages referring to EAP session timeouts from WLC filling our logs. Seems to be with this model WLC because we have Cisco 4400 WLCs pointing to the same ACS with no issues. Is there a bug or special configuration that is necessary to marry the 5508 with ACS v5.1.0.44?
View 9 Replies View RelatedWe are doing a new installation of a Cisco ACS 5.4 replacing a Microsoft NPS.
Recently I ran into issues with Lexmark wireless printers authenticating against the ACS 5.4.
While these printers work against the old Microsoft NPS we want to replace, I get "11500 Invalid or unexpected EAP payload received" on the ACS.
Windows/Android/iDevices authenticate against the same SSID using PEAP. I suspect, we ran into
CSCtq46211 Bug Details
Lexmark Printers work with ACS 4 but not ACS 5 Symptom: Lexmark printers uzed to work with ACS 4.2 but they produce "internal error" on acs 5.1 or 5.2
Conditions: Not known exactly
Workaround:1st Found-In 5.2(0.26.3)
Fixed-In 5.3(0.40.7)
setting up a new VM with ACS 5.3 patching it to P7, reconfiguring and retest all the stuff we implemented during several days ist not an option.
The Cisco TAC refuses to open a SR because the product is under warranty only, and claims warranty only covers HARDWARE replacement... (and we ordered ACS is a VM,,,) Maybe I should burn the ISO image to a DVD and RMA it for repair .
Maybe Cisco could verify whether the fix for CSCtq46211 has been integrated to ACS Version 5.4.0.46-B.221 already or not ?
Is it possible for ACS 5.1 to only allow specific AD users to authenticate the switches and routers? Currently What I have configured is only for all AD users. I can't seem to find a way to be selective.
View 9 Replies View RelatedI am not sure what I am trying to do is possible, so I thought I would pose the question on here. In ACS 5.3, I would like to use an RSA server and AD to authenticate my network devices. So when I log into a router or switch I would enter my AD username, be prompted for my RSA token, then when I enable be prompted for my AD password, or visa versa. how to write an access policy to achive this?
View 2 Replies View RelatedRather than maintaining local accounts is it possible to authenticate admins against AD? I'm talking about administrators of the ACS server itself to be clear.
View 2 Replies View RelatedI have a user named "testuser" and trying to authenticate from the xp computer but fails to authenticate. The ACS logs says that authentication failed, the user is in the local database but why it fails to authenticate?
I have cisco switch :
WS-C2960G-48TC-L 12.2(52)SE C2960-LANBASEK9-M
*Mar 8 04:03:55.030: AAA/BIND(00000029): Bind i/f
*Mar 8 04:03:55.173: %AUTHMGR-5-START: Starting 'dot1x' for client (782b.cbc9.a027) on Interface Gi0/2 AuditSessionID 0A6A00200000001924EBD428
*Mar 8 04:03:57.010: %LINK-3-UPDOWN: Interface GigabitEthernet0/2, changed
[Code]....
The ACS can authenticate people using local database , it can also authenticate a single user (using windows database) if you are fast after the service is restarted , however after a few secounds, it fails to authenticate any users , the error we are seeing on the logs appear as authentication failure type : internal error. Also on the log files, the authentication request from the user does not appear in the correct group, it is thrown into the default group.
View 7 Replies View RelatedI'm with one problem, my OS Lion don't authentication in the Secure ACS Version: 5.2.0.26.10.For the Mac Lion operating system to work you must put in execeção the MAC Address of your computer. I wonder how it could cause the OS to authenticate the ACS Lion.
View 1 Replies View RelatedI have ACS 4 integrated with RSA 6.1, where users of ACS can authenticate their passwords with the rsa server.I am migrating users to ACS 5, and I want to integrate with rsa.
I am configuring rsa as “rsa secureID token servers”.But how should I configure the users on acs to authenticate the password with rsa?
Previously on acs 4, on the user page, in password field, I select authenticate with external DB, Also, any guide for the config on rsa 6.1 side (with acs 5)
I'd like to configure wireless access from winXP to authenticate with our corporate Novell LDAP through ACS
Setup:
WinXP SP3 --> WLC 4402 --> ACS 5.2 --> Novell LDAP
1. Our Novell LDAP server uses secure LDAP (port 636) to authentication user.On ACS 5.2, when we configure this option we need to select Root CA. Should the Root CA in ACS must be the same as the LDAP server's? (the LDAP's certificate issuer)
2. What kind of authentication that this setup supports? Does it support PEAP/MSCHAPv2 as in Windows Zero Configuration or it only supports PEAP-GTC, EAP-FAST, EAP-TLS (which means I have to use Intel Proset/Wireless software to configure).
For unknown reason I cannot get WLC to authenticate correctly with ACS 5.2. it's very strange in the sense that when I checked the log. ACS authenticates and authorized the WLC 4402 but I cannot log to the WLC. login screen appeared, if I typed user name it jumped to Controller> user: password:
No matter what I typed (internal or external users) nothing seems to work. This is my frustration, I have no problem authenticating routers and switches except WLC 4402.
We are running Cisco Secure ACS for Windows version 4.1(1)b23p5 on a Windows 2000 member server. Starting from today, ACS fails to authenticate users. Using the same external user (andrea-meconi) I can verify successfull and failed authentication. This is the AUTH.log for a genericRADIUS request...
AUTH 25/02/2013 15:30:24 I 0396 3900 External DB [NTAuthenDLL.dll]: Starting authentication for user [andrea-meconi]
AUTH 25/02/2013 15:30:24 I 0396 3900 External DB [NTAuthenDLL.dll]: Attempting
[Code].....
I have a question its posible to authenticate an cisco phone and PC with the same vlan(voice and data)when i do this configuratión , the phone and pc dont work. The phone display registering and never finished.interface FastEthernet0/5 switchport mode access switchport voice vlan 1 authentication event fail action authorize vlan 11 authentication event no-response action authorize vlan 11 authentication host-mode multi-domain authentication port-control auto authentication periodic authentication violation protect mab dot1x pae authenticator dot1x timeout tx-period 10 dot1x max-reauth-req 3 spanning-tree portfastend.
View 1 Replies View RelatedACS 5.1 is failing to authenticate tacacs authentication to the ASA firewall, getting
View 6 Replies View RelatedI have a ACS 4.2 under windows, I setuped it to authenticate routers by RADIUS and TACACS+ protocols. now I have some devices whitch know only LDAP protocol. How can setup ACS as a ldap server to authenticate those devices?>
View 1 Replies View RelatedI was looking for a way the manually re-authenticate dot1x client from cli and found this: [URL]
"You manually reauthenticate the client by entering the dot1x reauthenticate interface interface-id privileged EXEC command"
I've tried it 2960 with 12.2(58)SE and 15.0(2)SE, but it doesn't seems to be implemented. Have I missunderstood something? Or do you guys have any other command to accomplish a manually re-auth?
I have successfully set up a windows 2008 box as a Radius server and use it to authenticate VPN users against ta AD database.I have also set up a similar policy that permits authentication for management purposes to all my networking devices (routers,switches and the ASA).Both policies work fine.Of course I don't want every VPN user to have administrative access to the ASA and every other device on my network.How can I discriminate between the 2 groups (VPN users and Network administrators)
View 3 Replies View RelatedIs it possible to create on ACS5 rule which will:
1. Try to authenticate user in external database1 (radius)
2. When external database1 returns FAIL (because of bad password) ACS5 should try to authenticate user in another external database2 (radius)
I'm doing some testing with ACS server on my windows box and I can't seem to get a barebone radius authentication to work with ACS internal users. I tested the same configuration with TACACS and it works fine, so there's something missing or misconfigured in my setup.
I have a cisco 3550 switch that I want users to login using their ACS username/password.
SW1
username cisco password 0 cisco
username admin password 0 admin
[Code].....
I have a cisco nexus 7000 switch and a cisco ACS 5.2. I would like to setup the switch to be able to authenticate users with tacacs+ using RSA secureid tokens when they try to logon to the switch.
View 1 Replies View RelatedDeployed two Cisco ISE 1.1.3. ISE will be used to authenticate wireless users, admin access to WLC and switches. Backend database is Microsoft AD running on Windows Server 2012. Existing Cisco ACS 4.2 still running and authenticating users. There are two Cisco WLCs version 7.2.111.3.Wireless users authenticates to AD through ACS 4.2 works. Admin access to WLC and switches to AD through ISE works. Wireless authentication using PEAP-MSCHAPv2 and admin access wtih PAP/ASCII.
Wireless users cannot authenticate to AD through ISE. The below is the error message "11051 RADIUS packet contains invalid state attribute" & "24444 Active Directory operation has failed because of an unspecified error in the ISE".Conducted a detailed test of AD from ISE. The test was successful and the output seems all right except for the below: [code]
Update:
1) Built another Cisco ISE 1.1.3 sever in another datacentre that uses the same domain but different domain controller. Thais domain controller is running Windows Server 2008. This works and authentication successful.
2) My colleague tested out in a lab environment of Cisco ISE 1.1.2 with Windows Server 2012. He got the same problem as described.
Our customer has the business needs to authenticate remote users against AD with empty password. I've seen ACS5.1 release note where mentioned about resolved issue: #CSCte72751 #ACS 5.1 drops authentication with empty password.
I tried to authenticate dial-in users through Tacacs and Radius against AD with empty password but without success. ACS points to wrong AD password. Is it possible to authneticate remote users with empty password?
