Cisco Security :: ASA IOS 8.3 Local CA Security Vulnerability?
Apr 9, 2011
I was informed by a co-worker that there is a security vulnerability with the local certificate authority in the ASA running 8.3 code. I've looked through the security advisories and haven't been able to find anything about this. Was this just misquote or am I missing the security advisory release?
View 1 Replies
ADVERTISEMENT
Apr 14, 2013
Apparently there is a vulnerability issue which was just discovered with TP-LINK TL-WR841N wireless router running firmware version: 3.13.9 Build 120201 Rel.54965n and below,as described here: [URL] and here: [URL] there latest firmware 3.13.27 Build 121101 Rel.38183n already addressing this issue or is there any other planned correction expected to address this vulnerability issue ?
View 5 Replies
View Related
Jan 16, 2013
copy or move into local area network? If any software to check which PC or Workstation or Users or IP to do this.
View 2 Replies
View Related
Apr 2, 2013
I have AT&T Uverse and VOIP. I can receive calls but when I try to call out many local numbers and 800 #'s I get a busy signal. I called AT&T and they said everything looks ok to them. Could this have anything to do with Windows firewall or modem settings?
View 7 Replies
View Related
Nov 29, 2012
I need to integrate Cisco ISE and WLC5508 with FlexConnect (local switching) using EAP-TLS security for wireless clients across multiple floors (dynamic VLAN assignments based on floor level). The AP model used is 3602.
- What RADIUS Attribute can be used for dynamic VLAN assignments based on floor level? Is there an option where I can group all LWAPs in same floor for getting certain VLAN from ISE?
- I intend to use WLC software version 7.2 since 7.3 is latest version. Has someone use WLC software version 7.3 without any major bugs/issues pertaining to FlexConnect and EAP-TLS?
- I read some documents saying L3 roaminig is where the associated WLC has changed. However if user move to different subnet but still associated to the same WLC, would this be consider as L3 roaming too?
View 3 Replies
View Related
Jun 8, 2012
I have been having some issues with Windows Audio needing to be restarted every time I log on. Also my theme has changed unexpectedly. I also noticed that Wndows firewall isn't started and it won't let me start it it gives me this...Could not start the Windows Firewall/Internet Connection Sharing (ICX) on local computer. Error 3 access is denied.
View 3 Replies
View Related
Apr 20, 2011
How to place security + a password on a folder that is shared on a local area network. i don't want other users to access the contents in the folder since we are all on the same local network.
View 4 Replies
View Related
Dec 19, 2011
I'm studying for CCNA Sec exam and looking for any security labs for GNS3 or Packet Tracer.
View 3 Replies
View Related
Feb 28, 2011
My company ordered NAC and ACS 1120 My question is Can i configure 802.1X security through ACS server and NAC in layer 2 Inband Virtual Gateway.for campus switches.Is it the good design to have double security for switch ports. 1st is 802.1X and 2nd is NAC in layer 2 INBAND VG?
View 1 Replies
View Related
Aug 8, 2006
ASA 5510 security plus edition will it support active/active failover. and does it support context with securiyt plsu edition. and how many default context do we get with asa 5510 security plus edition.
View 3 Replies
View Related
Mar 29, 2012
I have a Linksys WRT610N wireless system with WPA-PSK security and this works fine with several computers but now one computer detects the wireless security as WEP and can thus not connect to the router. I have tried to manually connect to the router with correct security WPA-Personal (TKIP) and correct password but then the computer says "settings saved on this computer for the network do not match the requirements of the network".How can I get the computer to detect the correct security? The computer is running Windows 7 home premium.
View 7 Replies
View Related
Mar 24, 2013
Is it true that the FCC is investigating the Pogo game site because of poor security? Is Java the cause of this problem?I'm very leery of getting on the Pogo site because I've been told that my computer could get a virus and crash.
View 1 Replies
View Related
Dec 24, 2011
I'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
View 3 Replies
View Related
Jan 19, 2013
I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies
View Related
Sep 15, 2012
I want to install Microsoft Security Essential on my PC, but I am not sure which download I need. One says amd64 and the other is x86. I am using windows xp 32bit.
View 2 Replies
View Related
Apr 20, 2013
Some security tools and techniques for wireless LAN??
View 1 Replies
View Related
May 24, 2011
I have a ASA 5505 that I test with which originally came with the Security Plus license. I recently erased flash and loaded the latest asa841-k8.bin version of IOS along with asdm-642.bin. Everything booted fine and came up as it does when freshly wiped however I noticed that i was now only running a base license. If I issue the sh activiation-key command, I noticed the following messages (full output is at the bottom):
The Running Activation Key is not valid, using default setting
......
This platform has a Base license.
......
Failed to retrieve flash permanent activation key
Did I somehow kill my Security Plus licensing when I did the erase flash? If so how do I recover it?
ciscoasa# sh activation-key
Serial Number: JMXXXXXXHU
Running Permanent Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
The Running Activation Key is not valid, using default settings:
Licensed features for this platform:
Maximum Physical Interfaces : 8 perpetual
VLANs : 3 DMZ Restricted
Dual ISPs : Disabled perpetual
VLAN Trunk Ports : 0 perpetual
[code]...
This platform has a Base license.Failed to retrieve flash permanent activation key.The flash permanent activation key is the SAME as the running permanent key.
View 2 Replies
View Related
Jun 10, 2012
How can I get the security key password for my iPad?
View 2 Replies
View Related
Dec 28, 2011
I have windows xp home and the last few days a security installation has kept trying to install ie: "Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242) (update 1 of 1)..."
View 3 Replies
View Related
Aug 22, 2011
my router has a WPA security system and I want it to be a WEP security system, what must i do?
View 7 Replies
View Related
Dec 9, 2012
if SSH v1 is considered vulnerable why is it still enabled by default on the ASA 8.4 by default?What is the vulnerability impact of using SSH v1 on an ASA?
View 1 Replies
View Related
Feb 20, 2013
Faced this recent vulnerability?
[URL]
My understanding is that for ASA 8.4.1 and prior, there's a vulnerability that opening many ssh sessions and one of them times out, the firewalls crashes!
As we have many customers with ASA using 8.2.5(26) (for example) I'd like a confirmation that for fixing that bug I need to upgrade my ASA image to at least 8.4.x.Case that, I believe that all the former firewall configuration must be reviewed because 8.2.x version has many different commands that 8.4.x (for example, NAT)
View 19 Replies
View Related
Mar 16, 2012
I would like to perform vulnerability scan on Cisco switch and router.Is there any free vulnerability scan tool recommended for Cisco device ?
View 2 Replies
View Related
Apr 19, 2012
We have ASR1002 routers configured to run individual SubPackages, at this point everything is operating without problems.We just received a Cisco Security Advisory informing us SSHv2 is vulnerable in our version of router code.We have to upgrade to the recommended stable release, so we downloaded, installed and expanded the IOS to expose the SubPackages on the ASR routers bootflash.
Since we are running SubPackages, do we need to upgrade all SubPackages (I.E. complete IOS upgrade) of can we just upgrade the vulnerable SubPackage? How do you determine which SubPackage contains the SSHv2 application?
View 2 Replies
View Related
Jul 19, 2012
I had a bad expirience with Switch 3750-X. Because of an auditing security processess, my customer ran a software called "Nessus" to do a scanning of vulnerability on the network. When this software is point to switch, the process of the switch will next to 100% and reset. The software only do a listening on the ports to see what ports are opened and the switch should not reset because this. Bellow is the log os switch on the moment of test; we note that the processess 'HTTP' rise moments before the switch reset. I disable the HTTP service on switch but the problem persist. The test was made only one machine connected to switch.
View 4 Replies
View Related
Feb 28, 2012
i am using asa821-k8.bin image, in my cisco 5520, How can i check if my IOS is vulnerable ?
View 4 Replies
View Related
Oct 10, 2012
We had a PCI security audit of an existing VIP on our ACE 4710. The VIP is set up as HTTPS terminating on the ACE with a http redirect for all 80 traffic. The audit reported this VIP was vunerabled to the Cisco "IOS HTTP Authorization Vulnerability". Which basicly states, http Management is on this IOS device. It does not make any sense, as the VIP is pointed to a pair IIS servers?
[URL]
View 2 Replies
View Related
Feb 16, 2011
Nature of the vulnerability that FW 1.31 is said to correct?
View 5 Replies
View Related
Aug 16, 2012
I had my lap top formatted.can not find key for cisco router,
View 1 Replies
View Related
Aug 23, 2011
Way to get Security key
View 2 Replies
View Related
Jan 4, 2012
I have a DIR-600 C1 running the latest available firmware version (3.03).
Model: DIR-600
Hardware Version: C1
Firmware Version: 3.03
WiFi Protected Setup is turned ON.I would like to know if it is affected by the new disclosed vulnerability described here:[URL] Also, turning WiFi Protected Setup OFF may not assist to mitigate this vulnerability?
View 2 Replies
View Related
Apr 10, 2012
I would like to receive Cisco's email alert for bugs, security vulnerability, etc. if there is such service.
View 3 Replies
View Related
Mar 23, 2012
I want to ask for the possibility of configuration below? 2x Cisco ASA 5510 running Multi-Context mode and Active/Active Failover1 Cisco ASA 5510 (ASA 1) has AIP-SSM1 Cisco ASA 5510 (ASA 2) has CSC-SSMThere are 2 contexts, context A and context BASA 1 is the primary firewall for context A, and secondary firewall for context BASA 2 is the primary firewall for context B, and secondary firewall for context A
Can AIP-SSM on ASA 1 inspects traffic of context B which primarily runs on ASA 2?Can CSC-SSM on ASA 2 inspects traffic of context A which primarily runs on ASA 1?
View 2 Replies
View Related