I have a DIR-600 C1 running the latest available firmware version (3.03).
Model: DIR-600
Hardware Version: C1
Firmware Version: 3.03
WiFi Protected Setup is turned ON.I would like to know if it is affected by the new disclosed vulnerability described here:[URL] Also, turning WiFi Protected Setup OFF may not assist to mitigate this vulnerability?
When the Wrt600N came out, it was said that the "Reserved" button would be enabled by a future firmware upgrade to support WiFi Protected Setup. Surely in the three or so years this has come to pass.Does anyone have a link to information on using WPS with the WRT600n?
View 5 Replies View RelatedIs WRTU54G-TM affected by Wi-Fi Protected Setup security vulnerability? Device is not mentioned on this list: url..If yes, can it be fixed or is device bricked?
View 1 Replies View RelatedOn Page 16 of my N600 DB manual it says that below the "Router Status Light" and above the "WPS" letters there is a "Wi-Fi Protected Setup (WPS) Light and Button". When I look at my router all I see in this space is a raised rectangular plastic strip. Should I have a light and button there?
View 1 Replies View RelatedI have bought a new WRT54G2 router since the old one broke down. When I log into the 192.168...and click wireless, it takes me to this window that says Searching for your Client Device....If you haven't clicked wi-fi protected setup button please do so now. It's stuck at 98% and I click on the bottom middle button with the 2 arrows constantly and nothing is happening.
View 5 Replies View RelatedI am using a Linksys Wireless-G Broadband Router(Model WRT54G). I am trying to set up a desktop computer to have a wireless usb adapter running so I can connect to the Wireless-G Broadband Router. When I run the setup CD for the wireless usb adapter it asks me to push the Wi-Fi Protected Setup Button on the Linksys Wireless-G Broadband Router.
I have looked at the Linksys router found an obscure button on the front with the Cisco Systems Copyright logo on it. I pushed this but the wireless usb adapter failed to locate the wireless network. There is also another button on the back of the Linksys Router that is a Reset button.
[URL]I have a Linksys E4200, even if i put wireless on manual WPS is still working, any answer from Linksys?
View 5 Replies View RelatedNature of the vulnerability that FW 1.31 is said to correct?
View 5 Replies View RelatedWhen adding a device that has a web protected setup button, can I use the web protected setup button on my Linksys E2000 router to set up the device even though I setup up my router using the Manual setup on the Web Interface configuration?
View 1 Replies View RelatedLet's say I have 3 APs, all connected to a WLC 5508,Each AP has a computer that is connected to it, Computer A, B and C, all on the same Vlan with same SSID
Is it possible to configure so
A and B can not talk to each other but both can talk to C ?
Something like "protected port" feature in the switch world.
Apparently there is a vulnerability issue which was just discovered with TP-LINK TL-WR841N wireless router running firmware version: 3.13.9 Build 120201 Rel.54965n and below,as described here: [URL] and here: [URL] there latest firmware 3.13.27 Build 121101 Rel.38183n already addressing this issue or is there any other planned correction expected to address this vulnerability issue ?
View 5 Replies View RelatedI am unable to get my laptop to connect to the internet when my wifi network has any type of security option or authentication selected. i want to password protect my network and it shows that the network name and passphrase i selected are correct on the router setup page. I can connect to wifi just fine when there is no authentication set on the network, but when I change it to WPA2 or WEP or any type of security on the router setup page, my laptop is able to find the network and connect with local only access. it gives me the option to reset the network adapter or generate a new ip address, but the problem still persists, and the connection only works when there is no password. is it my laptop or the router that is the problem. it has worked previously with a different router with password security.
View 2 Replies View RelatedI try to connect my mac via WiFi I got connection timeout; with my android it keeps trying to connect without success (I didn't change passwords or anything these days).If I choose to connect via guest network everything goes fine.The only way to make it work as expected is to reboot the router.it's a X2000 with latest firmware (2.0.3)?
View 4 Replies View RelatedI have somthing to ask about the ADSL modem and wifi router. (I am using Windows Xp) I have 1 ADSL modem, TP LINK TD 8812, with 2 port, LAN and USB, on the modem has 5 blinking lights, USB, LAN, ADSL, Internet and Power, I use USB port for my laptop, so that 4 lights were turned on, except the LAN's, I also have a wifi router, TENDA w316r, which is connect to the modem by LAN port, when it's connected, the LAN's light in the moden will turn on. That's what it usually works. But now, when I connect the router to the moden, the LAN's ligh on the modem just flashing then turn off right away, it works fine on different machine. I don't know why, I think it's software problem. What do you guy's think about that ? About the gateway, the modem has 1 gateway, the router has 1 gateway, too. At first, when I connect the router, I can only access to the router's gateway, when I disconnect the router, I'm back to the moden's router, how to fix that ? I want to sefl control which gateway I can connect. And now, I just can't connect to any of the 2 gateway, the router's gateway, since the LAN's light on the moden not turned on, I think that's where it begins. But the modem's gateway ? I can connect to the internet as usually but I can't access to the modem's gateway, whenever I type "192.168.1.1" (modem's default gateway) a window appears (Authentication Required) then I fill the username and password with the right infomation, then click ok but it still appears after and after and after that, when I click cancel, then browser says "Protected Object" and I can't connect to modem's gateway.
View 2 Replies View RelatedTrying to connect (ipod touch) to DIR-655 with WPA2 enabled.
* Is there a way to connect without having to enter entire Long WPA2 Pre-Shared Key?
* why iPod has required me to enter security password several times - why would it keep losing the saved password I've entered?
- What is the PIN SETTING for on Device homepage? Is that a shortened key?
-I'd already added multiple times in past, too...
Is there anyway to force the xbox inside the router to grab the same ip address everytime it comes on? Other than changing it on the console via a static ip? Xboxs dont like static Ip address and its getting annoying?
View 11 Replies View RelatedI have DIR-615 Cx (bought in Taiwan) Hardware C2 ver. I reflashed with DIR-615 firmware from Singapore to get English interface. I connect to a internet through another router on which I setup D-Link on DMZ with port forwarding. Router works fine, I have internet connection. So the question is: I have small cafe and want to offer customers WiFi connection. I want to setup a time limit and allow them to browse only internet not internal network. (When I connect laptop to D-Link Wifi I can see my NAS on different subnet connected to cable modem/router) And if its possible to limit bandwidth. Can I do it with DIR-615 and how to configure such a setup?
View 1 Replies View RelatedRegion : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP :
Firmware Version:
3.13.23 Build 121225 Rel.37950n
Hardware Version:
WDR4300 v1 00000000
Since I upgraded to the latest firmware I can only use the USB storage sharing when "Access shared storage with password" is left UNCHECKED. If I check the box I can no longer see the storage shares in Windows 7. I have also tried "\tploginlink.net" in the Run box, and it connects but shows me no mounted volumes. Also, Is it possible to set up more than two user accounts in addition to "admin" and "guest"?
if SSH v1 is considered vulnerable why is it still enabled by default on the ASA 8.4 by default?What is the vulnerability impact of using SSH v1 on an ASA?
View 1 Replies View RelatedFaced this recent vulnerability?
[URL]
My understanding is that for ASA 8.4.1 and prior, there's a vulnerability that opening many ssh sessions and one of them times out, the firewalls crashes!
As we have many customers with ASA using 8.2.5(26) (for example) I'd like a confirmation that for fixing that bug I need to upgrade my ASA image to at least 8.4.x.Case that, I believe that all the former firewall configuration must be reviewed because 8.2.x version has many different commands that 8.4.x (for example, NAT)
I would like to perform vulnerability scan on Cisco switch and router.Is there any free vulnerability scan tool recommended for Cisco device ?
View 2 Replies View RelatedWe have ASR1002 routers configured to run individual SubPackages, at this point everything is operating without problems.We just received a Cisco Security Advisory informing us SSHv2 is vulnerable in our version of router code.We have to upgrade to the recommended stable release, so we downloaded, installed and expanded the IOS to expose the SubPackages on the ASR routers bootflash.
Since we are running SubPackages, do we need to upgrade all SubPackages (I.E. complete IOS upgrade) of can we just upgrade the vulnerable SubPackage? How do you determine which SubPackage contains the SSHv2 application?
I had a bad expirience with Switch 3750-X. Because of an auditing security processess, my customer ran a software called "Nessus" to do a scanning of vulnerability on the network. When this software is point to switch, the process of the switch will next to 100% and reset. The software only do a listening on the ports to see what ports are opened and the switch should not reset because this. Bellow is the log os switch on the moment of test; we note that the processess 'HTTP' rise moments before the switch reset. I disable the HTTP service on switch but the problem persist. The test was made only one machine connected to switch.
View 4 Replies View Relatedi am using asa821-k8.bin image, in my cisco 5520, How can i check if my IOS is vulnerable ?
View 4 Replies View RelatedWe had a PCI security audit of an existing VIP on our ACE 4710. The VIP is set up as HTTPS terminating on the ACE with a http redirect for all 80 traffic. The audit reported this VIP was vunerabled to the Cisco "IOS HTTP Authorization Vulnerability". Which basicly states, http Management is on this IOS device. It does not make any sense, as the VIP is pointed to a pair IIS servers?
[URL]
Need to set up the network to be password protected. How do I do this?
View 1 Replies View RelatedI noticed my connection to my school's WiFi was abnormally poor, so I went into the preferences in an attempt to fix my atrocious connection. In doing so, I accidentally checked some box, and I am prompted with an "enter user credentials" message, or some crap like that. The network itself isn't password-protected, so this is a problem within MY computer. Allow me to reiterate my issue in case there was any ambiguity. I accidentally checked some box that put a password on a normally non-password-protected network.
View 4 Replies View RelatedI was wondering is it OK if I leave on my cable modem constantly? I have it plugged in to a surge protector as well as other things including my laptops accessories as well. I work from home so I need to be protected, anyway I read from one source that you should keep the cable modem on as it is too much of a hassle to turn it off and then turn it on as the network could get delayed for a couple minutes or something? Also I read as well though that you should turn off the cable modem once a month or something to clear out memory? Is that correct? I leave my computer laptop on all the time with an exception of one day a week. I turn it off for 8 hours supposedly I read it is good for cleaning out memory etc.
View 1 Replies View RelatedMy monthly internet allocation has recently been getting used up far more quickly than I expect it should. I am wondering if someone unauthorised is using my wireless facility. I do not remember ever applying a password to this facility. How would I find out it if has password protection?
View 2 Replies View RelatedRunning three systems, Win 7, XP Media and a Vista system. My problem is with the Vista system. I need to share an external USB drive with the other two systems. Access from either of the other two systems is not allowed, get "Logon Failure: the user has not been granted logon type at this computer" Attempts to turn off "Password Protected Sharing" in the Net and Sharing Center do not work. Click OFF and then Apply results in returning to the ON status. I don't even get a request for a password on the other systems when attempting to map the drive that is on the Vista system. The Vista system is running with no windows password required.
[code]...
I have my Router, not asa, with IOS Easy VPN Server established. If I use split tunneling my clients can access the net all day long and access hosts and resources over the VPN on the other side of the network as if it were plugged into the lan. The hard part I cant figure out is how to force tunnel. I want all internet access to go through the router and not to split tunnel in addition I want to retain the ability to access local resources as if I were plugged into the LAN. I have security reasons for doing this and I am not worried about a little extra load on the router. Let me know where to start looking. I can provide configs if necessary. If I do be warned I am trying to learn what all this nifty Cisco Config Pro GUI can do so my config is gonna be full of all kind of stuff that is messy. I wont post unless asked.
View 1 Replies View RelatedI want to force a certain program (Max Payne 3) to use the third and forth DNS's that I configured in advanced settings of DNS settings (Windows7).
I want to do this because for some reason, using Google DNS in Turkey makes the game not start forcing me to use the DNS servers of my Internet provider. (if only it tried the second DNS that I configured, it would start but for some reason it does not)
i try to connect to a website i know is opperating but get error timed out 4 out of 5 times
View 1 Replies View Related
