D-Link DIR-655 :: Connecting Devices To WPA2 Protected With Entering Entire Pre-shared Key
Jun 3, 2011
Trying to connect (ipod touch) to DIR-655 with WPA2 enabled.
* Is there a way to connect without having to enter entire Long WPA2 Pre-Shared Key?
* why iPod has required me to enter security password several times - why would it keep losing the saved password I've entered?
- What is the PIN SETTING for on Device homepage? Is that a shortened key?
-I'd already added multiple times in past, too...
View 1 Replies
ADVERTISEMENT
Aug 17, 2012
My nexus 7 and my friends nexus phone are both running jellybean 4.1.1 and are unable to connect to our workplace's belkin wireless router. My nexus 7 says "authenticating" then says "network saved" then switches back to "authenticating". My friend's phone just gets stuck on "network saved". My iPhone and most other devices, including a different android phone, are in fact able to connect with no problems. I have tried resetting the router, but I am afraid that is all I will be able to do with regards to the router.
View 3 Replies
View Related
Aug 10, 2012
We have a LAN of 11 computers, I have shared some the folders on my PC because I had to, But I don't want anyone to be able to copy some of the contents........What should I do?
View 3 Replies
View Related
Jul 31, 2011
if its possible to set a maximum bandwidth for the entire wlan or for entire Vlan in the WLC 5508 ?
View 3 Replies
View Related
Jul 6, 2011
The problem that I'm having is basically that my router isn't giving right ip addresses to my devices. I've tried to connect a wireless printer (HP for doubts) and the router gave a 169.254.XXX.XXX ip address to it. If I unplug/plug the router, the problem is solved. It can also be fixed by using the "reboot device" tool that the router has at the configuration page. But this only works for some hours, so it isn't
Now, it isn't a printer problem. It has also happened with some notebooks, with around 5 to 6, not all of them. I've tried changing channels, resetting the router, changing password, security password type, changing firmware (present is 3.11NA H/W C2), and nothing can fix it.
View 1 Replies
View Related
Oct 4, 2012
The laptops and the desktop in my home connect perfectly fine to our wifi, but all other devices like our iPhones, iPads, Nintendo DS, Nintendo Wii, and a 2006 hp laptop will either show a connection, but the connection doesn't actually work, or there will be a broken connection shown to our wifi. All these devices (except the Nintendo devices[only because we haven't tried it out]) will connect and perform on wifi elsewhere.We have a d-link router?
View 5 Replies
View Related
Feb 9, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.00
ISP : Tiscali/Talktalk
I have just bought and setup this router, Wired connection working fine, Problem is no devices seem to connect to wireless, my other PC, phone etc find the router with strong signal, I enter the key but nothing happens. I tried with my phone and stood next to the router and it connected but dropped out when I walked a few feet away.
View 6 Replies
View Related
Oct 9, 2012
I've found that Android devices (smartphones for sure, and perhaps other devices, like Windows Vista/XP pc's with some Atheros wi-fi adapters) can't connect to our eduroam network (WPA2 Enterprise) if the Access Points (all from Cisco) also have open SSID's configured in it. Once I protect the open networks with, for instance, WPA-PSK, the Android devices immediatly get connected to the eduroam. Is there any fix that can be applied to the Access Points. Below there's a list fo AP models and IOS version we have running. I may mention that this problem doesn't occur with Access Points from other manufacturers like, for instance, Meru Networks.
In the AP's event log appears the folowing:
"Packet to client 0026.3778.081f reached max retries, removing the client"
The steps to mitigate the problem above were applied, but with no results.
PS: The Android versions may vary with the same symptom.
Device types: AP 1100; AP 1130; AP1140;AP1210;AP1250
View 19 Replies
View Related
Jan 10, 2013
D-Link Router 615, with Xplornet Satellite Internet <-(internet sucks).
We got the router about 5 months ago and it has been good, few losses of connection and you have to reboot which is understandable. The internet is always random so if the router needs reset/reboot its no problem.
However about a month or so ago its started redirecting constantly once you put a website in the address bar. Its not always the same sites either. Sometimes its google for part of the day, some times the site wont work for a week. It redirects me all the time to the D-Link Router Log In, and no matter how i try to access the website im trying to go to, it redirects me to the D-Link.
View 3 Replies
View Related
Feb 27, 2009
I got a Studio 1535 Laptop which comes with a Broadcom WiFi card that is named "Dell Wireless 1397 WLAN Mini-Card" in the Hardware Manager.
I tried to connect to my ZyXel WiFi router but though i had it all configured right, Windows would always come up with "you entered the wrong key". After playin around for some time i figured out that everything just works fine when i switched my router from WPA-PSK to WPA2-PSK. My router features both WPA-PSK and WPA2-PSK but since my other PC does only support WPA-PSK the router is set to that and i want it to stay that way. I just don't want to buy new hardware for all my other computers.
So is this WiFi card strictly incompatible with WPA-PSK? Does'nt make any sense to me because WPA2 works just fine! Normally they are downwards compatible aren't they? (Moreover, when setting up a connection i can choose WPA-PSK from the dropdown menu.
View 27 Replies
View Related
Feb 4, 2013
Region : Ireland
Model : TD-W8960N
Hardware Version : V4
Firmware Version : TD-W8960N
ISP : Vodafone Ireland
I am having a rather annoying problem. I run a small hotel (just 3 floors) and my modem gives a strong enough signal to provide wireless access to everybody in the house however I'm finding that a lot of people, whilst they can connect to the modem, cannot browse online. Connection just times out when they open their browsers.Recently a guest gave me his laptop and asked me if I could do anything with it. I'm by no means an expert when it comes to this kind of thing so I chanced my arm by putting his MAC address into the CP's Wireless/MAC Filter page. He connected immediately and was able to go online much to my relief.
Thing is, I don't want to have to do this for every guest that comes through my door! Is there any way everybody who has a laptop can connect without me manually entering their MAC addresses? MAC restrict mode is set to 'disabled' but I thought that would allow everybody unrestricted access?
View 2 Replies
View Related
Jan 25, 2011
I have a HP laptop which is shared on my network using the Windows 7 Homegroup settings. I have set up the homegroup to share the media files.
Laptop:
HP DV7TSE/Core i7/8 GB/2x320GB HDDs Wirelessly connected to my home network
Network streaming devices:
Sony BDP-S570 Blu Ray Player
WDTV Live
Both connected through LAN to the router
In my Laptop homegroup & sharing options I have only shared the music, video, & pictures folders. I have set the D drive (separate HDD) as not to be shared.However, when I am browsing the folders on the streaming devices it shows some folders of my D drive which don't even exist anymore. Initially when I set up the drive D drive was visible. However I later changed the settings to unshare the D Drive.
View 3 Replies
View Related
Dec 22, 2012
I'm trying to connect an old HP desktop I have (running windows XP) to my home network, which uses WPA2 encryption. I'm pretty much a network noob so I have no idea what's going wrong. Right now it's stuck on "validating identity" when I try to connect to the network.
So far in my quest to solve this problem, I have:
1. Downloaded Service Pack 3.
2. Tried disabiling Authentication for the network.
From reading around forums I've learned that apparently after downloading Service Pack 3, I should be able to choose 'WPA2' as an option for "Network Authentication" on my Network's properties page. It still isn't showing up for me though.
Since my desktop can't connect to the internet, I couldn't download Service Pack 3 directly so I downloaded it on another computer, put it on a flash drive, and then uploaded it to the desktop. I'm not sure if this could be the problem or not, but if it makes a difference, I can verify on my Computer's properties page that I am running Service Pack 3.
My network adapter is a "Hawking Technologies HWP54G Wireless-G PCI Card". Is it possible that this card does not support WPA2? How do I tell? If it doesn't support WPA2, am I **** out of luck for trying to connect to my network without upgrading the card itself?
Why doesn't "WPA-2" show up as an option for my Network Authentication type?
View 7 Replies
View Related
Oct 29, 2011
Recently bought a laptop HP Pavilion DM4 with Windows 7 home premium 64 bit for use in a college wireless environment. The school insists on WPA2 Enterprise connection, which is supposedly the recommended Microsoft security protocol for Win 7. I have all the correct settings, such that I can routinely connect to the wireless network but on this model HP I consistently get speeds way under 10kbs, while if I use EXACT same settings on a different Lenovo, Dell, or other models of HP get speeds of over 5MG. Yes 500x faster.Of course HP wanted to blame the network, but after sending 2 technicians to visit on campus, they agreed it was their hardware, so they sent a replacement unit. Unfortunately, the replacement unit has the EXACT same problem. BTW the problem computers do connect flawlessly to other wifi networks at full speed, just not the WPA2 Enterprise network.
View 1 Replies
View Related
Sep 20, 2011
At our work, we have a shared documents server and also an email server to connect to. For some reason, on one computer only, I cannot connect to either my e-mail or the shared docs. It simply will not accept the credentials (ie my password for my username). It won't accept anyone else credentials either. I have set up fine on another computer, and on my home computer which is on a different network. I can categorically say that it's a computer problem as the usernames/passwords work fine on every other computer, but this one cannot seem to connect. I connect to the servers through a shortcut on the desktop, so i think it's the exchange or something I can't connect to.
View 14 Replies
View Related
Jun 27, 2012
I have somthing to ask about the ADSL modem and wifi router. (I am using Windows Xp) I have 1 ADSL modem, TP LINK TD 8812, with 2 port, LAN and USB, on the modem has 5 blinking lights, USB, LAN, ADSL, Internet and Power, I use USB port for my laptop, so that 4 lights were turned on, except the LAN's, I also have a wifi router, TENDA w316r, which is connect to the modem by LAN port, when it's connected, the LAN's light in the moden will turn on. That's what it usually works. But now, when I connect the router to the moden, the LAN's ligh on the modem just flashing then turn off right away, it works fine on different machine. I don't know why, I think it's software problem. What do you guy's think about that ? About the gateway, the modem has 1 gateway, the router has 1 gateway, too. At first, when I connect the router, I can only access to the router's gateway, when I disconnect the router, I'm back to the moden's router, how to fix that ? I want to sefl control which gateway I can connect. And now, I just can't connect to any of the 2 gateway, the router's gateway, since the LAN's light on the moden not turned on, I think that's where it begins. But the modem's gateway ? I can connect to the internet as usually but I can't access to the modem's gateway, whenever I type "192.168.1.1" (modem's default gateway) a window appears (Authentication Required) then I fill the username and password with the right infomation, then click ok but it still appears after and after and after that, when I click cancel, then browser says "Protected Object" and I can't connect to modem's gateway.
View 2 Replies
View Related
Jan 4, 2012
I have a DIR-600 C1 running the latest available firmware version (3.03).
Model: DIR-600
Hardware Version: C1
Firmware Version: 3.03
WiFi Protected Setup is turned ON.I would like to know if it is affected by the new disclosed vulnerability described here:[URL] Also, turning WiFi Protected Setup OFF may not assist to mitigate this vulnerability?
View 2 Replies
View Related
May 22, 2013
I´m trying to connect them to my WLAN, for throubleshoot I create a new WLAN with WPA2-TKIP and a PSK, the devices didin´t connect to the WLAN.I also change the security to WPA2-AES with TKIP, it didn´t work too.
My best choice was to disable every security configuration in order to began the throubleshooting from zero, but even with no Layer 2 and 3 security, the devices didn´t connect to my Test WLAN.
I´m using a AIR-CT2504-K9 WLC with two AIR-CAP3502I-A-K9 AP, all the PCs and other brand cellphones and tablets work well.
Also I have a SOHO router on the office, and the IPad connect without a problem with that WLAN, but I need them to connect to my Cisco AP.
View 7 Replies
View Related
Mar 31, 2011
I just installed my new DIR-655 yesterday and it went pretty smoothly. However, only my Notebook PC is connecting as 802.11n. All my other devices that are N capable are connection at 802.11g. These devices are XBox 360 Elite with wireless N adapter, 2 wireless N Roku Players, and Lexmark X6570 Printer. Is there some way to get the router to see these devices as N capable short of forcing everything to connect as 802.11n?
View 6 Replies
View Related
Mar 2, 2011
how to open shared drives on server 2008 while connecting with vpn connection
View 1 Replies
View Related
Feb 13, 2013
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP :
Firmware Version:
3.13.23 Build 121225 Rel.37950n
Hardware Version:
WDR4300 v1 00000000
Since I upgraded to the latest firmware I can only use the USB storage sharing when "Access shared storage with password" is left UNCHECKED. If I check the box I can no longer see the storage shares in Windows 7. I have also tried "\tploginlink.net" in the Run box, and it connects but shows me no mounted volumes. Also, Is it possible to set up more than two user accounts in addition to "admin" and "guest"?
View 2 Replies
View Related
Jan 18, 2012
I have a Gateway connected to my router with wpa2-psk and have internet access. I have on old Dell with an an old d-link card that can't access the router because it won't do wpa2. I'd like to connect it to the other laptop to gain access to the internet because it is inconvenient to plug the old Dell directly into the router.
View 1 Replies
View Related
Apr 16, 2011
Is it possible to change from WPA2 to WEP security without making international phone calls to Peggy?While I was away from home our WIFI went down, my daughter was able to get the network back but in the process she changed the security. The biggest problem is that my G3 iBook can see the network but can't sign in.
View 1 Replies
View Related
Feb 20, 2011
I use this router for my laptop with WPA2 encryption.. It works fine But When I try to use my iphone for wifi , It says ' Unable to join the network"
When I remove the security, It work s fine on iphone. how to allow iphone to access the wifi
View 1 Replies
View Related
Nov 12, 2012
I cannot get the camera to connect to our wifi via WPA2-PSK:AES, which is what it runs. The network /SSID is visible in the setup, but it won't connect and get an ip. I see no error messages or any kind of information at all in the admin web page.I've upgraded to firmware 1.05
View 2 Replies
View Related
Jan 6, 2012
I've been working on a project which basically is two motherboards running as a single PC. I've managed to remove all of the bugs etc I've found along the way, as well as blowing up a fair few PSU's and am now at the point of having a fully working system. What i now want to achieve is have them both online and able to access remotely via a VNC application. I can already do this for the top board which has a seimens 3G router plugged into it. I can then use the top board to VNC into the bottom board as they are connected on a LAN (just a standard ethernet cable from one port to the other, no hub/switch etc), however this way seems a bit OTT. What i was wondering is if it is possible to link the bottom motherboard to the top one and have them each running off of a different port on a shared IP.
View 3 Replies
View Related
Jan 11, 2013
i have a question about accessing shared folders over the WAN-Port of an DIR-615. For your information: both sides of the network (LAN and WAN) are under my control.
On the WAN-side of the network we have a fileserver with shared files. We can ping the server and reach it and the Websites on this server are also reachable from the LAN-side. But if we try to access to the shared folders the request doesn't reach the server. If we change the router there are no more problems and anything works without problems. The Router has default-settings except the network-settings so it works in our network. Does this router block outgoing traffic on ports 135-139 and/or 445? And when yes is there any way to disable this? I can't find it.
View 4 Replies
View Related
Sep 26, 2011
I would like to connect a variety of wireless devices in my house to my work VPN while allowing other devices in the house access to my home network as normal.I was hoping to find a wireless ADSL router that allows me to associate a LAN port to a VPN connection, then connect a wireless access point to that port. I could then run two wireless networks in my house, one that would connect to my work VPN and the other that would not.
View 1 Replies
View Related
Nov 29, 2012
My laptop isn`t connecting to my home network but my ipod and other computers are.
View 1 Replies
View Related
Aug 30, 2011
I have 8 apartments that have a single internet connection coming into the building, I then have a PoE Access Point in each of the 8x apartments.
What I would like to be able to do is to have each apartment within its own vlan, but to be able to use the internet via one of the non-PoE ports (port 9 say) but do not want residents in different flats to be able to see each others devices on the same network.
I have a Cisco SG 300-10MP which has 8x PoE ports and 2x Ethernet ports, one of which my Internet connection is plugged into (using WiMax).
View 2 Replies
View Related
Jan 15, 2011
I have a linksys wrt54g router. i need to block all devices except one from plugging in a wired device into the back of the router. i tried the mac filtering, but i didnt work. Is that for wireless only?I can also block local ips (192.168.1.x), and was going to go that route and only allow my local computer but i was afraid if i restarted my router or computer the ip would change and i would be locked out.
View 2 Replies
View Related
Aug 25, 2012
My wifi router is linksys WRT300N v1.1 At first my wifi works great with this devices . iphone 4s , ipod touch 4 , hp pavilion dv6 , dell inspirion 1545 . But it don't works with android devices I had a bunch of them samsung galaxy s3 , galaxy nexus , amazon kindle and more ...The android devices connect to wifi but wifi doesn't work for them in browsers I can't open pages there's appears <webpage not available> , but I can use skype on android devices.
View 1 Replies
View Related
May 30, 2012
Wireless router started randomly not allowing any wireless devices to connect to the network. A wired cable worked fine, but not wireless. So we had to unplug the router and then it would work fine.You could see the device, but not connect. We moved our wireless phone a little farther away from the router thinking it was interfering, but still no luck. It didn't matter if it was an iPod, our BluRay player, or a laptop.
View 1 Replies
View Related
