TP LINK TD 8812 - Protected Object And Can't Connect To Modem's Gateway
Jun 27, 2012
I have somthing to ask about the ADSL modem and wifi router. (I am using Windows Xp) I have 1 ADSL modem, TP LINK TD 8812, with 2 port, LAN and USB, on the modem has 5 blinking lights, USB, LAN, ADSL, Internet and Power, I use USB port for my laptop, so that 4 lights were turned on, except the LAN's, I also have a wifi router, TENDA w316r, which is connect to the modem by LAN port, when it's connected, the LAN's light in the moden will turn on. That's what it usually works. But now, when I connect the router to the moden, the LAN's ligh on the modem just flashing then turn off right away, it works fine on different machine. I don't know why, I think it's software problem. What do you guy's think about that ? About the gateway, the modem has 1 gateway, the router has 1 gateway, too. At first, when I connect the router, I can only access to the router's gateway, when I disconnect the router, I'm back to the moden's router, how to fix that ? I want to sefl control which gateway I can connect. And now, I just can't connect to any of the 2 gateway, the router's gateway, since the LAN's light on the moden not turned on, I think that's where it begins. But the modem's gateway ? I can connect to the internet as usually but I can't access to the modem's gateway, whenever I type "192.168.1.1" (modem's default gateway) a window appears (Authentication Required) then I fill the username and password with the right infomation, then click ok but it still appears after and after and after that, when I click cancel, then browser says "Protected Object" and I can't connect to modem's gateway.
I was wondering is it OK if I leave on my cable modem constantly? I have it plugged in to a surge protector as well as other things including my laptops accessories as well. I work from home so I need to be protected, anyway I read from one source that you should keep the cable modem on as it is too much of a hassle to turn it off and then turn it on as the network could get delayed for a couple minutes or something? Also I read as well though that you should turn off the cable modem once a month or something to clear out memory? Is that correct? I leave my computer laptop on all the time with an exception of one day a week. I turn it off for 8 hours supposedly I read it is good for cleaning out memory etc.
i am using a tp link 8817 modem, i can go online normaly but i can not access the default gateway (192.168.1.1, i check it in cmd/ipconfig) it keeps asking me username and password, althought i filled them with the correct username and password.
So network was running fine for about a year or so. Network consists of 1 Motorola SB6120 cable modem attached to a D-Link DIR-601 wireless router. All settings were default except for SSID and WPA password. One day I just couldn't access internet anymore. I've narrowed it down to the default gateway that is being given out through DHCP. The default gateway that is being given out is the IP of the modem (192.168.100.1) and not of the Router (192.168.0.1). I can't find any option on Wireless router to be able to force the gateway address when handing out the gateway IP. Theoretically I thought I should be able to put router on same subnet as modem as 192.168.100.2 but that still doesn't work. If I set the IP adresses statically on the PCs and give it the Gateway of the Router everything works fine. I should mention this is for my boss' house and basically I dont want him calling me everytime he has a friend come over and I have to talk em through setting up a Static IP.
And just for an example this is what I get if I use DHCP:
IP Address: 192.168.0.155 Mask: 255.255.255.0 DNS: 192.168.0.1 Default Gateway: 192.168.100.1
And If I want it to work I have to change the default gateway to 192.168.0.1 I've tried updating routers firmware and reset to factory default numerous times. Is it possible for a router DHCP stop working?
Does the ASA treat an object-group with a network-object containing a range of IP addresses as a netmask? For example, I can apply this configuration without the ASA throwing any errors though the configuration calls for a 'net mask':
object-group network test network-object 192.168.0.0 192.168.63.255 ? network-object-group mode commands/options: A.B.C.D Enter an IPv4 network mask sh run ob id test object-group network test network-object 192.168.0.0 192.168.63.255
I found that in the documentation it requires a netmask as oppose to a range. Is this a bug in the code? I am running code version 8.0(5)23 on a 5520. If this is not a bug how does the ASA treat this type of configuration when applied to an access list? When I ran a quick packet trace and denied access from that range it looks like the ASA doesn't read that configuration properly.
WiFi Protected Setup is turned ON.I would like to know if it is affected by the new disclosed vulnerability described here:[URL] Also, turning WiFi Protected Setup OFF may not assist to mitigate this vulnerability?
Okay, so our old computer took a dump & our friend rebuilt us a new one and he threw in a new router to go with it. Its a D-Link router, which is directly connected to our desktop. However, upon completion of a new desk installment, we put the router into the cabinet and my gateway laptop immediately stopped being able to connect to the internet or the router at all.
1) The router is connected to the internet and broadcasting.
2) I've reset and refreshed the router and my window of available networks on my laptop, which did not work.
3) I've pulled it out of the cabinet, which also had no affect.
4) I did a manual search for the router, and it says the network already exists and asks if i would like to connect and upon agreeing to this, it returns me to the page of available networks, which does not include my router.
I am unable to get my laptop to connect to the internet when my wifi network has any type of security option or authentication selected. i want to password protect my network and it shows that the network name and passphrase i selected are correct on the router setup page. I can connect to wifi just fine when there is no authentication set on the network, but when I change it to WPA2 or WEP or any type of security on the router setup page, my laptop is able to find the network and connect with local only access. it gives me the option to reset the network adapter or generate a new ip address, but the problem still persists, and the connection only works when there is no password. is it my laptop or the router that is the problem. it has worked previously with a different router with password security.
I am not able to connect to password protected network while others get connected to the network and are using it.even if it gets connected it shows no internet access. I tried troubleshooting and it said no valid ip configuration.
Since I upgraded to the latest firmware I can only use the USB storage sharing when "Access shared storage with password" is left UNCHECKED. If I check the box I can no longer see the storage shares in Windows 7. I have also tried "\tploginlink.net" in the Run box, and it connects but shows me no mounted volumes. Also, Is it possible to set up more than two user accounts in addition to "admin" and "guest"?
I just installed my Linksys E1000 and it seemed really easy. I allows the Guest Option, named the Network and put in a network Password. When I try to connect the phone, I don't get the screen on the phone that asks for the PW. I can connect as a guest, but it does connect with out even asking the guest password.
New hardware here, requesting a bit of your knowledge, We are tryingin to setup a simple gateway to gateway VPN
HomeA Has an RV016 with a public static IP Local Group Security Gateway type is IP Only with the IP Local Security Group Type is Subnet, with the local IP class 192.160.0.0 Remote Security Gateway Type: Dynamic + Email Email address some@emailaddress.com Remote Security Group Type: Subnet IP Address 192.168.1.0 IPSec Setup as default with nice password.
HomeB has an RV082 with a dynamic ADSL link Local Group Security Gateway type is DynamicIP +Email Email address some@emailaddress.com Local Security Group Type is Subnet, with the local IP class 192.160.1.0 Remote Security Gateway Type: IP Only Remote Security Group Type: Subnet IP Address 192.168.0.0 IPSec Setup as default with nice password.
The idea is for HomeB which has a dynamic IP, to reach HomeA, which has a static IP and connect. But they just wont. I have not clue what's wrong, I followed the instructions, maybe i miss interpreted something. I could share the VPN logs for both., Im getting a lot of errors there.
I ordered the D-link DIR-815 router online at [URL], and I'll be receiving it this Monday which is the 14th, so I am asking my questions on here now, so I could be prepared.
1.) I don't have a wireless card in my PC, so I will be connecting wired to get WiFi via WAN and LAN ports, right? First before I forget, I have a Windows 7 32-bit desktop PC. We are working with a DSL modem residential line without phone line using a coaxial cable, and Ethernet cable from modem into the PC. connecting this D-link router to my modem and WiFi, and for me to use the WPA2 security?
2.) I have an iPhone 4 with Verizon. If I want to use my iPhone to get WiFi from the router, and turn off the Internet on my phone, and use WiFi only on my phone, how would this work?
I bought a DIR-655 last week and have a very odd problem: have set up the DIR router after my Modem/Router Netgear DG834 when i connect a laptop with LAN cable to one of the LAN ports on the DIR i can access internet without any problem.When i search wireless network from my laptop the DIR turns up and have excellent reception(4-5bars).
This works fine when i start for ex. google, but then after clicking on a link or trying to access any other webadress, the internet disconnects?? (i still have excellent reception between the router and laptop.)It also seems that the internet connection is reestablished automatically after 1-2 min, but disconnects again after a few minutes. I have the same issue with WII, the WII console finds DIR but when I'm trying to update the firmware in the WII console the connection stop working.
One more Q: when i connect LAN cable from modem to DIR i get no internet access, should it be that way? How u are suppose to connect LAN cabels between modem/DIR/stationary PC?
i just installed a dlink dsl-520b modem. I installed it using the cd wizard without the router connected. Now when i try to hook the router [dir-655 rev B v2.10NA] up the world light is orange and i cannot get a connection. I tried running the wizard but it times out and says it cannot find the server. I used the reset button and that did not work. It says to use a PPoe connection and i have the right password but it will not connect.
I can't connect with my D-Link router 4300 to the modem. It's like my router doesn't recognize the internet connection of my modem because there is no available connection at all, for every single PC in my home ! When I connect a cable to my PC, it works. I can't see the problem because I can't even connect to http://192.168.0.1/. I tried many variations but nothing. It all started because I changed the WPA security to WPA2. Then it restarted my router and nothing worked after. I tried several times to reset my router with the reset button, but nothingHere is the ipconfig[CODE]
I've been trying to connect my D-Link DIR-601 router with a Motorola SBG901 cable modem. The modem itself has a built-in WIFI (G) and one ethernet port, but not good enough for my purposes. I need more wired connections and an (N) WIFI connection, which the D-Link could provide, if I could get it to work. I just cannot get the two pieces of equipment to talk to each other. I can set up 2 independent LAN's, but no WAN (internet connection) from either. D-Link has provided pages of instrutions, but nothing works.
Region : Brazil Model : TL-MR3420 Hardware Version : V1 Firmware Version : TL-MR3420_V1_120523 ISP : TIM
The TL-MR3420 recognizes my modem (Olivetti Olicard 160), but it does not connect to the 3G network. I tested the modem on my PC and it connects fine. The PIN verification is deactivated and the Modem configuration is the same as I use on the PC, however it just keeps trying to connect without success. I updated the firmware to the latest version.
I've been using D-Link DIR-600 wireless router for two months with my ISP, SmartBro. A week ago my internet went down due to heavy rain and technical support had a home visit yesterday to re-activate my internet connection. My net connection came back smoothly using a direct connection from modem to laptop.When I tried to connect the modem to my wifi router, the internet was not detected. Even if I reset the router settings, no internet connection was detected. Initially, I thought there is a problem with my wifi router so I connected the modem to our Edimax wired router but still it could not detect internet access. Every time I open a browser while connected to a router, this message is shown (see attached screenshot).
I tried using another ISP, Wi-Tribe with both wired and wifi routers and everything worked well. So now I assume the problem lies with my SmartBro ISP. I called the ISP hotline but they told me that they do not provide support for router connection problems; only with single, direct connect to a PC.I asked a neighbor IT technician to look into my problem but he too could not solve the problem.
I have a TP-Link TD-8616 modem and TP-Link TL-WR740N wireless router. Both are ADSL compatible. Each time I tried to connect with the wireless router I will no longer have internet service. Teksavvy is my internet provider. how I can get this to work.
my dir-655 rev. A2 router won't connect to the new modem that Charter sent me. I had the scientific Atlanta model dpc2100r2 modem but Charter called and said that they have upgraded my speed for free from 18/2 to 30/4 and that I needed a new docsis 3.0 compatable modem in order to take full advantage of the speed upgrade. I received the modem and connected an activated it according to their instructions. The modem works fine when connected to the PC only but as soon as I connected to the dir 655 the link light went out on the modem and I lost my internet connection. The first step I took was to clone the mac address in Wan section of router. It still did not work. The next step was to turn the modem off, the router off and shutdown the PC. I waited until this morning to reconnect everything. I started the PC, then I started the modem and waited for it to stabilize and finally I restarted the router. I still had no connection. The status page of the router said that the cable was disconnected and that network was disconnected. There was no info to release so I clicked the renew button but nothing happened.
Region : Portugal Model : TL-MR3040 Hardware Version : V1 Firmware Version : TL-MR3040_V1_120822 ISP : Optimus Kanguru (LTE) www.kanguru.pt
I have a modem huawei E392u-12 from the service provider optimus kanguru, url..., and i would like to use my usb modem with this router i have. the router identify the modem but does not conect. i have seen that the bin files available are just for vodafone and TMN, what can i do so i dont have to buy another equipment.
Region : Others Model : TL-MR3040 Firmware Version: 3.14.4 Build 121017 Rel.62268n
I have purchased TL-MR3040 especial for share my 3G account . I have connect it by ethernet port and made setups and it is in 3g/4g only mode. In system checks my modem indicated as " Identified" the modem is a Huawei E160E . My notebook and tablet connects by wireless connection to TL-MR3040 but the router does not dial ISP number *99# . The led on usb modem continues flashing. the 3G modem works perfectly with my notebook and tablet and I use the same parameters for TL-MR3040 with tablet. But most of the parameters don't exist on setup pages of TL-MR3040 . [code]
Region : Australia Model : TL-MR3420 Hardware Version : V2 ISP : Telstra Bigpond
I have no access to the router ATM, but when I went to update, it was the latest version and build of the foirmware.I have read several reports of successful use of these two. I connect the MR 3420 to the PC, power it up. I connect BP3-EXT to the router and power it up. The MR 3420 router shows a very brief connect to the USB-based modem.: the USB light on the router stays on for about 2-3 seconds. The WLAN light on the router is on, showing a signal.
Running the setup has resulted in a couple of things. The Router's page shows that is knows the MODEM is attached to Telstra, in Australia. I do not get to put in #99# or my name and password. "Next" results in either a freeze of the Router's page "Connecting...." or I get to step through to "Congratulations, you have finished. Now connecting you to the Net"...with absolutely nothing happening on either the router or the modem. I am not sure how it thinks I am going to log in.If I do put in manual username and password, it freezes when I try to go Next.I _think_ that if the router page is frozen, it responds better if I pull the modem out of the router's USB socket.The modem works fine if plugged straight into the computer.I do remember I had a lot of trouble using a different brand of 3g router a couple of years back. Unfortunately, after I got it working, the router died.
At my office we have a wireless modem(D-Link DSL-2750U) and all the clients are connect to it wirelessly with a wireless lan card. at the next floor we have two pc(without wireless lan card) that I want to connect them to this network, I have a switch and a wireless access point(TP-Link TL-WA701ND). my Question is that how can I connect the WAP to Modem? I set the operation mode of WAP to client and add the MAC address of it in the table of wireless modem but the clients cant connect to the network.
Region : India Model : TL-WR841N Hardware Version : V8 Firmware Version : ISP : Reliance
I got a new broad band connection , its with an ADSL modem (ZTE ZXDSL 831). Now i want to plug in my TL-WR841N to use my WiFi and to connect to my second machine!! no matter what setup i try, i'm unable to connect
1. Green Packet DX-230 WiMAX modem with router 2. D-Link DIR-615 ver G2 (from my ISP) 3. D-Link 8 port desktop switch
I previously used the DIR-615 with my high speed broadband connection. However I had to move to a new house and here I can only get WiMAX. I want to...Place the WiMAX modem upstairs to serve as modem and wireless access point Have the DIR-615 function as the main router and firewall (downstairs) Use the switch to connect all the rooms in my house FYI my WiMAX modem has no connection configurations. I just plug it in and it'll connect automatically to the WiMAX signal. It has 2 LAN ports but no WAN port. From my understanding of networking, I have to turn off DHCP on my WiMAX modem, put it in the same IP range as my DIR-615 (192.168.0.100-199), and disable UPNP and NATPMP. After this I'm stuck.How do I tell my DIR-615 to use the WiMAX modem as it's WAN connection?Should I reserve an IP for the modem in my DIR-615?
We have telus firbe internet at this house. we have two connections each 25m-bit we've both got actiontech V1000H's. What im thinking is we hook each gateway up to a host pc (server) and go out from there to a switch (one line dedicated input, the other output as to not clog throughput), then from the switch out to two pc's in the house. phones xbox ect can use its own router(s) in theory would this work.
all based on gigabit lan will have additional network cards added for now we're doing a simple data server, but we've been pondering on how to get two separate connections to work in unison?
I bought yesterday a wireless modem/router and Tp-Link Adsl2+ N300 Modem Router Td-W8960n.I have 2 laptop computers at home.The first issue I have is that with one of the laptops (quite old - Acer Aspire 2420-2579 with Windows Vista Basic Service Pack 1) I can not connect (wireless) to the internet. It says local access only. However in other countries (IM in NZ) it does connect to internet. It does work when I use an Ethernet cable between my router and the laptop. The second issue is with my other laptop. A HP Pavillion DV-4 windows vista home premium service pack 2. I manage to get wireless access to the internet but every couple of minutes the connections drops and starts again by itself�. After 1-2 min approx�. it is getting pretty annoying!I don�t think it is the routher as I also have an XBOX 360 connectet to the internet usign the same device and works absolutely fine!
Region : India Model : TL-MR3220 Hardware Version : V2 Firmware Version : 3.14.2 Build 120822 Rel.57775n ISP : BSNL
I am unable to connect my TP-Link TL-MR3220 router with BSNL EVDO ZTE AC8700 modem. Even though my router has the latest firmware version 3.14.2 Build 120822 Rel.57775n, which is the boxed firmware i got with my router. All the time my modem gets Identified by the router, then it shows connecting phase......and restarts the modem.........Repeats the same step every time I try to connect.
For some reason, whenever I go home (I'm in college right now), my internet goes haywire. It'll connect for about an hour or so when I first load it up, but after that, it refuses to connect at all. If I restart my modem (verizon fios modem), then it'll connect for about 5 minutesIf I run the troubleshooter, sometimes it doesn't detect anything wrong with it, and other times, it says "the default gateway is not available"[CODE]
