D-Link DIR-655 :: Connect LAN Cables Between Modem / DIR / Stationary PC?
Jan 4, 2011
I bought a DIR-655 last week and have a very odd problem: have set up the DIR router after my Modem/Router Netgear DG834 when i connect a laptop with LAN cable to one of the LAN ports on the DIR i can access internet without any problem.When i search wireless network from my laptop the DIR turns up and have excellent reception(4-5bars).
This works fine when i start for ex. google, but then after clicking on a link or trying to access any other webadress, the internet disconnects?? (i still have excellent reception between the router and laptop.)It also seems that the internet connection is reestablished automatically after 1-2 min, but disconnects again after a few minutes. I have the same issue with WII, the WII console finds DIR but when I'm trying to update the firmware in the WII console the connection stop working.
One more Q: when i connect LAN cable from modem to DIR i get no internet access, should it be that way? How u are suppose to connect LAN cabels between modem/DIR/stationary PC?
View 7 Replies
ADVERTISEMENT
Feb 11, 2013
Moved into a home that has a wiring closet in the basement. Typical wiring closet setup, Cat 5 cables and Coax cables from the house outlets terminate there. There is a Suttle sam v8m voice distribution module installed. Looks exactly like the one in this user manual:Page 5 of 8, Wiring Diagram.URL,However, there is NO Sam D8 switch below installed in the wiring closet. The Cat 5 cables from the home outlets enter the wiring closet and plug directly into the Sam V8m.Can a comcast modem be connected to the Shuttle Sam V8m to make the Cat 5 outlets hot? Or, does the Sam D8 (or similar) need to be installed?
View 4 Replies
View Related
Mar 3, 2011
I have two computers in the house which are linked by an ethernet cables, my wireless router only has one ethernet hole,so I would like to know what I need to buy? such as an adapter or something, so I can have two ethernet cables to connect to my router.the type of router I have is called a Hauwei echolite HG521 broadband wireless ADSL2+ router.
View 1 Replies
View Related
Jul 28, 2012
My ZyXEL modem/router does not detect my ethernet cables. it has one that runs to the main computer and i have a cable connected to my xbox. the light does not turn on when i try to use the internet for my xbox and the xbox does not detect ethernet. the other port works fine for the computer.
View 1 Replies
View Related
Jul 17, 2012
UTP cables are crossover cables or straight through??
View 5 Replies
View Related
Feb 6, 2013
My router is a Dlink Model DI-624
My modem is an Arris Model TM502GI don't remember how to set it up. That is what cable goes where & is there anything to do on the PC With WiFi for it to connect with my router?I am 70 years old with a limited knowledge of computer and other electronic gadgets.
View 1 Replies
View Related
May 22, 2012
I have a little older computer (Dell Dimension 9200) which I want to use as a server at home. I have formatted it and installed Windows XP - ready to be used. The other computers that will connect to this server are running Windows 7.
The problem is that the stationary pc (the one I am trying to make a server) does not appear on the "what network folder would you like to map?" part on the laptop. The server/the Dell Dimension 9200 is connected to the internet, and is fully updated through Windows updates. All the other computers in the house appear on the one laptop, but not the computer I am trying to make a server out of.
View 19 Replies
View Related
Aug 24, 2011
What is it called when you use two cables to connect two switches together.
View 1 Replies
View Related
Jan 1, 2012
i want to connect 2 ethernet cables together threw a wall jack but i dont want to wire it. Do they make a wall jack that you can just plug in each side
View 1 Replies
View Related
Feb 6, 2011
I have two buildings. In first building I have network with internet. In other building network without internet. I need to connect buildings to the same network using two WAG320N modems by the phone line cable. Is it possible and what configuration I need to set up?
View 2 Replies
View Related
Dec 11, 2011
At a customer i've tried to add a new 3750 switch til a running stack.I used the following proccess:
1. connect stack cables to the new switch
2. bootup new switch.
Normally the new switch will become a member of the stack, but here, the switch says its the stack master. I can see that the stack port from the old switches connecting the new is up.The only way i could make it work was to provisioning the new switch as switch nr x, save, power off and then connect it and boot it up.The IOS i the same on all switches.
View 2 Replies
View Related
Jan 12, 2013
I ordered the D-link DIR-815 router online at [URL], and I'll be receiving it this Monday which is the 14th, so I am asking my questions on here now, so I could be prepared.
1.) I don't have a wireless card in my PC, so I will be connecting wired to get WiFi via WAN and LAN ports, right? First before I forget, I have a Windows 7 32-bit desktop PC. We are working with a DSL modem residential line without phone line using a coaxial cable, and Ethernet cable from modem into the PC. connecting this D-link router to my modem and WiFi, and for me to use the WPA2 security?
2.) I have an iPhone 4 with Verizon. If I want to use my iPhone to get WiFi from the router, and turn off the Internet on my phone, and use WiFi only on my phone, how would this work?
View 6 Replies
View Related
Jan 17, 2013
i just installed a dlink dsl-520b modem. I installed it using the cd wizard without the router connected. Now when i try to hook the router [dir-655 rev B v2.10NA] up the world light is orange and i cannot get a connection. I tried running the wizard but it times out and says it cannot find the server. I used the reset button and that did not work. It says to use a PPoe connection and i have the right password but it will not connect.
View 4 Replies
View Related
Jan 1, 2013
I can't connect with my D-Link router 4300 to the modem. It's like my router doesn't recognize the internet connection of my modem because there is no available connection at all, for every single PC in my home ! When I connect a cable to my PC, it works. I can't see the problem because I can't even connect to http://192.168.0.1/. I tried many variations but nothing. It all started because I changed the WPA security to WPA2. Then it restarted my router and nothing worked after. I tried several times to reset my router with the reset button, but nothingHere is the ipconfig[CODE]
View 1 Replies
View Related
Feb 13, 2012
I've been trying to connect my D-Link DIR-601 router with a Motorola SBG901 cable modem. The modem itself has a built-in WIFI (G) and one ethernet port, but not good enough for my purposes. I need more wired connections and an (N) WIFI connection, which the D-Link could provide, if I could get it to work. I just cannot get the two pieces of equipment to talk to each other. I can set up 2 independent LAN's, but no WAN (internet connection) from either. D-Link has provided pages of instrutions, but nothing works.
View 1 Replies
View Related
Dec 7, 2012
Region : Brazil
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_120523
ISP : TIM
The TL-MR3420 recognizes my modem (Olivetti Olicard 160), but it does not connect to the 3G network. I tested the modem on my PC and it connects fine. The PIN verification is deactivated and the Modem configuration is the same as I use on the PC, however it just keeps trying to connect without success. I updated the firmware to the latest version.
View 2 Replies
View Related
Jan 24, 2013
Can i connect my 3g USB modem to my dlink router directly through the usb port.
View 10 Replies
View Related
Jun 27, 2012
I have somthing to ask about the ADSL modem and wifi router. (I am using Windows Xp) I have 1 ADSL modem, TP LINK TD 8812, with 2 port, LAN and USB, on the modem has 5 blinking lights, USB, LAN, ADSL, Internet and Power, I use USB port for my laptop, so that 4 lights were turned on, except the LAN's, I also have a wifi router, TENDA w316r, which is connect to the modem by LAN port, when it's connected, the LAN's light in the moden will turn on. That's what it usually works. But now, when I connect the router to the moden, the LAN's ligh on the modem just flashing then turn off right away, it works fine on different machine. I don't know why, I think it's software problem. What do you guy's think about that ? About the gateway, the modem has 1 gateway, the router has 1 gateway, too. At first, when I connect the router, I can only access to the router's gateway, when I disconnect the router, I'm back to the moden's router, how to fix that ? I want to sefl control which gateway I can connect. And now, I just can't connect to any of the 2 gateway, the router's gateway, since the LAN's light on the moden not turned on, I think that's where it begins. But the modem's gateway ? I can connect to the internet as usually but I can't access to the modem's gateway, whenever I type "192.168.1.1" (modem's default gateway) a window appears (Authentication Required) then I fill the username and password with the right infomation, then click ok but it still appears after and after and after that, when I click cancel, then browser says "Protected Object" and I can't connect to modem's gateway.
View 2 Replies
View Related
Aug 12, 2012
I've been using D-Link DIR-600 wireless router for two months with my ISP, SmartBro. A week ago my internet went down due to heavy rain and technical support had a home visit yesterday to re-activate my internet connection. My net connection came back smoothly using a direct connection from modem to laptop.When I tried to connect the modem to my wifi router, the internet was not detected. Even if I reset the router settings, no internet connection was detected. Initially, I thought there is a problem with my wifi router so I connected the modem to our Edimax wired router but still it could not detect internet access. Every time I open a browser while connected to a router, this message is shown (see attached screenshot).
I tried using another ISP, Wi-Tribe with both wired and wifi routers and everything worked well. So now I assume the problem lies with my SmartBro ISP. I called the ISP hotline but they told me that they do not provide support for router connection problems; only with single, direct connect to a PC.I asked a neighbor IT technician to look into my problem but he too could not solve the problem.
View 14 Replies
View Related
Nov 5, 2011
I have a TP-Link TD-8616 modem and TP-Link TL-WR740N wireless router. Both are ADSL compatible. Each time I tried to connect with the wireless router I will no longer have internet service. Teksavvy is my internet provider. how I can get this to work.
View 3 Replies
View Related
Feb 8, 2012
my dir-655 rev. A2 router won't connect to the new modem that Charter sent me. I had the scientific Atlanta model dpc2100r2 modem but Charter called and said that they have upgraded my speed for free from 18/2 to 30/4 and that I needed a new docsis 3.0 compatable modem in order to take full advantage of the speed upgrade. I received the modem and connected an activated it according to their instructions. The modem works fine when connected to the PC only but as soon as I connected to the dir 655 the link light went out on the modem and I lost my internet connection. The first step I took was to clone the mac address in Wan section of router. It still did not work. The next step was to turn the modem off, the router off and shutdown the PC. I waited until this morning to reconnect everything. I started the PC, then I started the modem and waited for it to stabilize and finally I restarted the router. I still had no connection. The status page of the router said that the cable was disconnected and that network was disconnected. There was no info to release so I clicked the renew button but nothing happened.
View 3 Replies
View Related
Dec 18, 2012
Region : Portugal
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Optimus Kanguru (LTE) www.kanguru.pt
I have a modem huawei E392u-12 from the service provider optimus kanguru, url..., and i would like to use my usb modem with this router i have. the router identify the modem but does not conect. i have seen that the bin files available are just for vodafone and TMN, what can i do so i dont have to buy another equipment.
View 4 Replies
View Related
May 10, 2013
Region : Others
Model : TL-MR3040
Firmware Version: 3.14.4 Build 121017 Rel.62268n
I have purchased TL-MR3040 especial for share my 3G account . I have connect it by ethernet port and made setups and it is in 3g/4g only mode. In system checks my modem indicated as " Identified" the modem is a Huawei E160E . My notebook and tablet connects by wireless connection to TL-MR3040 but the router does not dial ISP number *99# . The led on usb modem continues flashing. the 3G modem works perfectly with my notebook and tablet and I use the same parameters for TL-MR3040 with tablet. But most of the parameters don't exist on setup pages of TL-MR3040 . [code]
View 6 Replies
View Related
Apr 6, 2013
Region : Australia
Model : TL-MR3420
Hardware Version : V2
ISP : Telstra Bigpond
I have no access to the router ATM, but when I went to update, it was the latest version and build of the foirmware.I have read several reports of successful use of these two. I connect the MR 3420 to the PC, power it up. I connect BP3-EXT to the router and power it up. The MR 3420 router shows a very brief connect to the USB-based modem.: the USB light on the router stays on for about 2-3 seconds. The WLAN light on the router is on, showing a signal.
Running the setup has resulted in a couple of things. The Router's page shows that is knows the MODEM is attached to Telstra, in Australia. I do not get to put in #99# or my name and password. "Next" results in either a freeze of the Router's page "Connecting...." or I get to step through to "Congratulations, you have finished. Now connecting you to the Net"...with absolutely nothing happening on either the router or the modem. I am not sure how it thinks I am going to log in.If I do put in manual username and password, it freezes when I try to go Next.I _think_ that if the router page is frozen, it responds better if I pull the modem out of the router's USB socket.The modem works fine if plugged straight into the computer.I do remember I had a lot of trouble using a different brand of 3g router a couple of years back. Unfortunately, after I got it working, the router died.
View 5 Replies
View Related
Jul 7, 2013
At my office we have a wireless modem(D-Link DSL-2750U) and all the clients are connect to it wirelessly with a wireless lan card. at the next floor we have two pc(without wireless lan card) that I want to connect them to this network, I have a switch and a wireless access point(TP-Link TL-WA701ND). my Question is that how can I connect the WAP to Modem? I set the operation mode of WAP to client and add the MAC address of it in the table of wireless modem but the clients cant connect to the network.
View 1 Replies
View Related
Apr 27, 2013
Region : India
Model : TL-WR841N
Hardware Version : V8
Firmware Version :
ISP : Reliance
I got a new broad band connection , its with an ADSL modem (ZTE ZXDSL 831). Now i want to plug in my TL-WR841N to use my WiFi and to connect to my second machine!! no matter what setup i try, i'm unable to connect
View 1 Replies
View Related
Nov 14, 2011
I have 3 pieces of hardware:
1. Green Packet DX-230 WiMAX modem with router
2. D-Link DIR-615 ver G2 (from my ISP)
3. D-Link 8 port desktop switch
I previously used the DIR-615 with my high speed broadband connection. However I had to move to a new house and here I can only get WiMAX. I want to...Place the WiMAX modem upstairs to serve as modem and wireless access point Have the DIR-615 function as the main router and firewall (downstairs) Use the switch to connect all the rooms in my house FYI my WiMAX modem has no connection configurations. I just plug it in and it'll connect automatically to the WiMAX signal. It has 2 LAN ports but no WAN port. From my understanding of networking, I have to turn off DHCP on my WiMAX modem, put it in the same IP range as my DIR-615 (192.168.0.100-199), and disable UPNP and NATPMP. After this I'm stuck.How do I tell my DIR-615 to use the WiMAX modem as it's WAN connection?Should I reserve an IP for the modem in my DIR-615?
View 3 Replies
View Related
May 13, 2012
I bought yesterday a wireless modem/router and Tp-Link Adsl2+ N300 Modem Router Td-W8960n.I have 2 laptop computers at home.The first issue I have is that with one of the laptops (quite old - Acer Aspire 2420-2579 with Windows Vista Basic Service Pack 1) I can not connect (wireless) to the internet. It says local access only. However in other countries (IM in NZ) it does connect to internet. It does work when I use an Ethernet cable between my router and the laptop. The second issue is with my other laptop. A HP Pavillion DV-4 windows vista home premium service pack 2. I manage to get wireless access to the internet but every couple of minutes the connections drops and starts again by itself�. After 1-2 min approx�. it is getting pretty annoying!I don�t think it is the routher as I also have an XBOX 360 connectet to the internet usign the same device and works absolutely fine!
View 6 Replies
View Related
Feb 13, 2013
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.14.2 Build 120822 Rel.57775n
ISP : BSNL
I am unable to connect my TP-Link TL-MR3220 router with BSNL EVDO ZTE AC8700 modem. Even though my router has the latest firmware version 3.14.2 Build 120822 Rel.57775n, which is the boxed firmware i got with my router. All the time my modem gets Identified by the router, then it shows connecting phase......and restarts the modem.........Repeats the same step every time I try to connect.
View 2 Replies
View Related
Feb 28, 2013
i just bought a Netgear WNDR4000 router due to troubles with my current modem/router combo (D-Link DSL2730-B). The router doesnt have in built modem functionality obviously so I need to set up the modem/router as a dedicated modem.Also should I use the current modem/router as the dedicated modem or an older model i own (I think its a DSL 502T)? Because the current one often drops the internet connection. Don't know if its a problem with the modem functionality or something else. Will the older one serve better since i didn't have any problems with that one or will it be outdated? I only upgraded due it not having wireless capabilities. Otherwise it's fine.Or will I be even better off buying a dedicated modem? I really don't want to spend more money but if this is a far better alternative I guess i will.
EDIT: Ok so found out that I have to put the modem/router in bridge mode in order for this to be possible. However, looking up how to do this lead me to a dead end because i need to fill in some fields that i have no idea how to interpret.
VPI:
VCI: These 2 already came with presets. Should I just leave them?
Select DSL Link Type (EoA is for PPPoE, IPoE, and Bridge): Choices of EoA PPPoA and IPoA
Encapsulation Mode: Choices of LLC/SNAP-BRIDGING and VC/MUX
Service Category: UBR without PCR, UBR with PCR, CBR, Non Realtime VBR, Realtime VBR
[code]...
View 1 Replies
View Related
Aug 23, 2011
My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies
View Related
Jan 16, 2013
I want to connect my tata photon device to my bsnl wifi modem via a usb portavailable on the bsnl modem. This is to provide a wifi network that i can use to surf the net on my phone.
View 4 Replies
View Related
Feb 7, 2012
I have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.
View 10 Replies
View Related
