TP-Link 3G/3.75G Router :: TL-MR3040 Recognize 3G Modem / But Doesn't Connect To ISP
May 10, 2013
Region : Others
Model : TL-MR3040
Firmware Version: 3.14.4 Build 121017 Rel.62268n
I have purchased TL-MR3040 especial for share my 3G account . I have connect it by ethernet port and made setups and it is in 3g/4g only mode. In system checks my modem indicated as " Identified" the modem is a Huawei E160E . My notebook and tablet connects by wireless connection to TL-MR3040 but the router does not dial ISP number *99# . The led on usb modem continues flashing. the 3G modem works perfectly with my notebook and tablet and I use the same parameters for TL-MR3040 with tablet. But most of the parameters don't exist on setup pages of TL-MR3040 . [code]
View 6 Replies
ADVERTISEMENT
Dec 18, 2012
Region : Portugal
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Optimus Kanguru (LTE) www.kanguru.pt
I have a modem huawei E392u-12 from the service provider optimus kanguru, url..., and i would like to use my usb modem with this router i have. the router identify the modem but does not conect. i have seen that the bin files available are just for vodafone and TMN, what can i do so i dont have to buy another equipment.
View 4 Replies
View Related
Mar 18, 2013
Region : Germany
Model : TL-MR3040
Hardware Version : V1
Firmware Version :
ISP :
Just got TL-MR3040 from amazon, not very happy that it is version 1, they could at least mention it in the description, but whatever...The problem is, i can not make it work with my PC laptop(thinkpad x120e with Windows 7 64 bit). Which means,1 not possible to get into web interface to configure it, and 2 if i configure it with old powerbook (os x 10.4) to share internet from usb stick, i can connect to it's wireless network but it doesn't share internet with my pc laptop,while mac and ipad working perfect...I've try to log in into web interface through the cable, still no luck...Not sure i want to re-install the whole system on my laptop just to see if it will change anything, it works with any other router, and usb sticks...
View 3 Replies
View Related
Oct 5, 2012
Ok this is the send router this has happened to but anyway after a power blink the router no longer recognizes that i have a modem connected to it no matter how many times I reboot both of them it can't recognize that i have a modem connected i know it is not the modem because i'm using it to type this right now directly connected to my desktop
I have windows 7
Linkysy E4200 V1
Century link DSL modem 660 series
View 9 Replies
View Related
Dec 15, 2012
Region : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.14.2 Build 120822 Rel.40902n
ISP : Airtel
I have just bought the MR3040. I am using this in India with local ISP Airtel and ZTE MF 880T LTE modem, which normally gives 4G connection when connected directly to the laptop.I have used the normal settings as guided by TP link and checked that dialing properties are all fine. When I am connecting through the MR3040, the blue light is visible in the modem but there is NO internet throughput, the internet icon in the router also remains OFF.
View 3 Replies
View Related
May 22, 2013
Region : UnitedStates
Model : TL-MR3040
Hardware Version : V1
Firmware Version : latest
ISP : Freedompop / Clear
How to get this router running with wimax usb from either Freedompop, Virgin, Clear , or Sprint?
View 5 Replies
View Related
Jan 26, 2013
Region : Others
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.12.11 Build 120328 Rel.63398n
ISP : Qubee or Banglalion wimax (in Bangladesh)
Any 4g/wimax usb modem compability list for mr 3040 routre?
View 1 Replies
View Related
Feb 23, 2013
Region : australia
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : Australia
Model : TL-MR3040
Hardware Version : Not Clear
Firmware Version :
ISP :
does any one know if the new sierra 320u 4g bigpond modem will work with the tl-mr3040 battery wifi router, and does it handle the 100mbs speed, also how relyable are these routers, and what is its range.
View 3 Replies
View Related
Dec 13, 2012
Region : Spain
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.12.11 Build 120328 Rel.63398n
ISP : SPAIN MOVISTAR
My TL-MR3040 router identifies correctly my ZTE MF 110 HUSPA USB MODEM but it doesn't connect to my ISP Movistar in Spain This is the Log of the router:
Log Content
before switch modem vid is 0x19d2 pid is 0x0083
Device vendorID: 0x19d2; productID: 0x0083
handle_card start
mobileCmdReq 328 mobileFormatCmd error
[code]....
View 1 Replies
View Related
Jan 15, 2012
I usually connect my PS3 to a switch which then goes to the BuT Home Hub and it works fine. However, I want to connect the PS3 directly to my Hub but when I plug it in to the Hub, it doesn't connect to the internet at all. Is there something I have to configure in order to get it to work?It is a PS3 160 GB Slim with Firmware 4.0.
View 2 Replies
View Related
Oct 11, 2012
Region : Belgium
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.12.21 Build 120523 Rel.37880n
ISP : 3G mobile
My router TL-MR3420 does not connect to my 3G modem. I did all the steps according to the router configuration. Despite of that, once it is on the status it doesn�t recognize my modem, HUAWEI, model number E1820.
View 5 Replies
View Related
Mar 8, 2013
Region : US
Model : TL-MR3040
Hardware Version : V1.0
Firmware Version : 3.12.11 build 120328 ref. 63398
i just got a new TP Link TL-MR3040 V1.0.While setting up the router page on wireless and saw the firmware is an old version 3.12.11 build 120328 ref. 63398.Did a check on the TP link site and there is a new firmware update TL-MR3040_V1_120822.I have downloaded the new firmware but dont know how to do it. Read the confusing "how to guide ......" but was stated "Do NOT upgrade the firmware via wireless connection"
Question : how to connect with LAN wire ? Try plugging btw the computer LAN and the router LAN.... can't access the 192.168.0.1
Question : any proper step-by-step guide on how to update the firmware?
View 1 Replies
View Related
Mar 14, 2013
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : Others
Model : TL-MR3220
Hardware Version : V1
Firmware Version : latest
ISP : Orange
The TL-MR3220 takes a long time to identify the 3g modem and sometimes it will not identify it at all and says "unplugged". Sometimes "unplugged" suddenly apears after the modem has been identified and was working properly.Is this the normal behavior of this device ? Why ? What can be done ? I'm Using Alcatel X500D 3g modem.
View 5 Replies
View Related
Jan 22, 2013
I have multiple computers on my network as well as cell phones logging in as wifi. At least once a day I have trouble or another computer has trouble getting on line through my network. I have to unplug my router and replug. Its as if it doesn't recognize the ip address until reboot.
View 1 Replies
View Related
Dec 28, 2010
DGL-4100
-> Wii
-> X360
-> PS3
-> DGS-2205 (gigabit switch in study)
*-> My PC
*-> Her PC
*-> DAP-1522
We're on the 192.168.1.x domain, and I've already hooked my PC up directly to the DAP-1522 and switched its IP address. So now, I can connect to it through the switch. I've renamed it, set it to WPA2 with a passphrase, and should be set to go. However, I can't get my laptop, IPod touch, or any devices to see it. Also, the DGL-4100 doesn't list it under the DHCP clients, but as I've got the DAP-1522 set to a static IP of 192.168.1.50.
View 1 Replies
View Related
May 14, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version :
ISP :
I've been using this router for almost 2 years and it has been excellent but since 2 weeks ago it has stopped recognizing anything connected to the LAN port 1 and the WAN port, so it becomes useless as a router because I cannot connect a cable modem. The cable modem was tested successfully with a direct connection to a computer but it doesn't work with the router, and also ANYTHING you connect to these ports on the router is not detected, the lights do not turn on.
View 3 Replies
View Related
May 31, 2011
When installing the DIR-615, router installs, but error msg that there is no internet connection. SmartConnect is plugged into the WAN and I have tried the ethernet cable to the computer in spots 1 & 2. Good connection when SmartConnect modem is connected to computer directly.615's Internet indicator will turn green for a while, usually less than a minute or two, then flashes, then may actually cause the routers status indicator to flash off, then back on. Like a reset.
View 2 Replies
View Related
Dec 31, 2012
Region : Finland
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version : 3.14.2 Build 120822 rel.577775n
ISP : saunalahti
dosen't support my huawei E392 4G modem. if possible would you make bin for this. there is not other modems that you can get for 4G connections from the service provider so it would be nice if there was more compatibility than some old ancient modems. starts to feel like this is been sold as 4G router and dosen't actually support that at all.
View 1 Replies
View Related
Jul 23, 2011
My computer suddenly doesnt recognize my router.it recognizes othrer routers, and my other PC's are recognizing the router.the router is located very close to the PC, and no other electronic devices located near by.
View 2 Replies
View Related
Mar 18, 2013
My Dell destop with Windows 7 all of a sudden doesn't seem to recognize my router, yet my laptop works fine (which I'm using now). After reading other posts, I reset the router with no results, used a new cable from the Belkin to the computer, changed ports, checked connections, restarted; nothing. When I do an ipconfig, a small window pops open and goes off before I can make anything out. I undestand Belkin's IP address is 192.168.2.1 and I'm showing that my IPv4DHCP Server is that, as is my DNS server. The IPv4WINS server shows nothing.
View 9 Replies
View Related
Jun 12, 2012
I just moved into a new apartment and inherited a former roommates internet set up. Our router was infected with DNSchanger, so I sought to reset the router and update the firmware. I reset the router and it no longer recognized the internet connection. I can connect when plugged directly into the modem, but the router doesn't recognize the internet connection. Below is my ipconfig/all log:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersREDACTED>ipconfig/all
[Code].....
View 4 Replies
View Related
Feb 8, 2013
Region : Poland
Model : TL-MR3040
Hardware Version : V1
Firmware Version : recent
ISP :
I have a tplink mr-3040 modem to use as repeater for my travels in hotels and after 2 monts I was not able to make it to work any time.Whenever I try with WEP, WPA or OPEN - like today - it's always the same problem: I can see repeated network with strong signal, but when I want to connect using laptop or phone connection stop on level of "getting IP address" and never end with final time-out.
View 14 Replies
View Related
May 7, 2013
Region : Italy
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Vodafone IT
Basically, the 3g port is absolutely not working in both devices.I've tried with 4 usb 3g adapter (all huawei and listed under compatible), THEN i bought a MA180 (yes, the TP-LINK 3g usb stick) and even this is not working.The MR3040 if i connect the MA180 simply will blink the MR3040 3g led ONCE, after that it simply does nothing.if i go under the status page on 192.168.0.1 it basically says:"3g usb: Identifying.." and it still stops there for even an hour.Same on the MR3020.
View 1 Replies
View Related
Jan 27, 2013
Region : UnitedStates
Model : TD-W8960N
Hardware Version : V3
ISP : Centurylink
I am replacing my qwest/centurylink actiontec q1000 with the td-w8960n. I have run all the different setups, with the different settings that I have found on the net but to no avail. The one thing I have noticed is that the light for the asdl on the td-w8960n does not come on, but yet when I plug it back into the actiontec it sees it and the internet works. Any reason why the td-w8960n is not recognizing the active dsl line?
View 6 Replies
View Related
Mar 6, 2013
Region : Spain
Model : TL-MR3040
Hardware Version : V1
Firmware Version :
ISP : Movistar
I can connect easily to internet with TP-Link MR-3040 router and Huawei E173 3G modem, but the router is disconnected or reseted after a while with no reason. it works fine between 5 and 15 minutes, rarely more than 1 hour, and when i see a video or download a large file the reset is almost automatic. This never happens with the Huawei modem connected directly to the PC!
View 1 Replies
View Related
Jan 4, 2013
Region : Others
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.12.11 Build 120328 Rel.63398n
ISP : CityCell Zoom (in Bangladesh)
I bought a MR3040 Router & I have a ZTE AC682 (EVDO) Modem. I found my modem's model in Modem Compatibility List (Other Country, Indonesia & Singapore).
1st time The router showing Unknown Modem.
Then I tried with .bin file upgrade. The Router Showing Identifying .... Then I tried with firmware Upgrade. But Still Showing Identifying ....
My Systems Log as below
code...
View 5 Replies
View Related
Apr 13, 2013
Region : Others
Model : TL-MR3040
Hardware Version : V2
Firmware Version : 3.14.4. Build 121017 Rel 62268n
ISP : CellC
I bought the MR3040 to use only with battery but now my if used with 3G stick E1752 it reboots. If I use a powered hub then it works.
I thought this devive was a mobile device, now it seems I need external power.
View 1 Replies
View Related
Apr 12, 2013
Region : UnitedKingdom
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.14.2 Build 120822 Rel 40902n
ISP : Three UK
I purchased a TPLink MA180 dongle to go with my TPLink MR3040 mobile router in the hope that by buying both components from the same manufacturer would avoid any compatibility issues; however despite many hours of trying I've not been able to get these two devices to work together. When I attach the MA180 dongle to the router, the status says that its "connecting", but it never connects (also the light on the dongle flashes to indicate its connecting, and doesn't stay green). Each of the components works independantly, for example if I plug the MA180 dongle into my laptop it connects to the 3G network ok, and if I connect the MR3040 to an ethernet it operates as a wireless router ok - but they don't seem to work together.I've upgraded the MR3040 firmware to the latest release, and reset everything back to the default settings to no avail. When running the quick setup wizard, the router correctly discovers that my mobile ISP is 3 UK, and automatically sets the dial number and APN for this network. I've also tried it with SIM card from a different mobile ISP (Virgin Mobile) and got exactly the same problem.
View 1 Replies
View Related
Mar 27, 2013
Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Celcom
There is a website that does not load when the router is in a certain setting. The website I tried to access was url...I have tried the different firmwares and settings and have narrowed it down to the AES encryption.Have tried the original 120328 firmware, works perfectly with all different settings.With the 120822 firmware, it works with all settings EXCEPT when AES is chosen as the encryption method, be it using WPA or WPA2 Personal.
I therefore pinpoint the AES encryption mode in the 120822 firmware to have a bug. I need to use 802.1n with AES, rather than TKIP.Can someone else using 120822, with AES encryption for wireless, verify that this is happening for them too?
View 2 Replies
View Related
Mar 4, 2013
Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.14.2 Build 120822 Rel.40902n
ISP : Celcom
Isn't MR3040 is supposed to work without battery with just AC power? Mine works fine with battery but without battery it keeps on restarting..
View 6 Replies
View Related
Apr 17, 2013
Region : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Idea 3G
I am using TP Link 3040 V1 and whenever I am using it with my IDEA 3G dongle model no E1732 it keep on getting disconnected after 15-20 mins.
When i restart the router again it works fine for another 15-20 mins and then again disconnects.
When I use the dongle directly in my laptop it works fine without disconnecting. So the issue is not in the Idea dongle but in the router.
View 8 Replies
View Related
Jan 21, 2013
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : India
Model : TL-MR3040
Hardware Version : V2
Firmware Version : 3.14.2 Build 120822 Rel.40902n
ISP : Reliance
Configuring my TL_Mr3040 with Huwei EC 150 model USB modem, the modem and ISP name is there in the list , I have configured all (manual/ as well as auto ) methods of authentication as mentioned in user guide.
for more infor , the exported profile from laptop where my modem works fine is
<?xml version="1.0" encoding="utf-8"?>
<utpsdoc type="Profile">
<ProfileGroup type="DialUp">
<Profile name="Reliance" type="" readonly="" device="" user="74831*****" password="74831*****" phonenumber="#777" autoapn="true" apn="" chap="true" pap="false" ip="" dns="" dnsalt="" wins="" winsalt="" imsi="" langid=""/>
</ProfileGroup>
</utpsdoc>
View 1 Replies
View Related
Apr 10, 2013
Region : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3G/3.75G
ISP : MTS
I have bought a wifi usb router 3040 version 1 i.e. 3G/3.75G. The shopkeeper is saying, he doesn't have version 2 i.e. 3G/4G.He is saying we can upgrade version 1 to 2 i.e. 4G.Is the hardware of version 1 and 2 are same?Should I return this?
View 3 Replies
View Related
