Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.14.2 Build 120822 Rel.40902n
ISP : Celcom
Isn't MR3040 is supposed to work without battery with just AC power? Mine works fine with battery but without battery it keeps on restarting..
Region : Peru
Model : TL-MR3040
Hardware Version : V1Firmware Version : latest
ISP : Movistar
Is there any chance to make work HUAWEI E303C with MR3040?I know this model is not in the compatibility list, but when I try connect this modem with the router, it can be identified but it cant be connected. On the logs it appears that there is a problem with dial, APN, but I'm sure I'm introducing the correct values?
Region : Germany
Model : TL-MR3040
Hardware Version : V1
Firmware Version :
ISP :
Just got TL-MR3040 from amazon, not very happy that it is version 1, they could at least mention it in the description, but whatever...The problem is, i can not make it work with my PC laptop(thinkpad x120e with Windows 7 64 bit). Which means,1 not possible to get into web interface to configure it, and 2 if i configure it with old powerbook (os x 10.4) to share internet from usb stick, i can connect to it's wireless network but it doesn't share internet with my pc laptop,while mac and ipad working perfect...I've try to log in into web interface through the cable, still no luck...Not sure i want to re-install the whole system on my laptop just to see if it will change anything, it works with any other router, and usb sticks...
Region : India
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 3.13.27 Build 121206 Rel.60215n
ISP : Airtel India
i Want To Add External Battery In My TL-MR3420 .. Is It Possible . Any One Try It Or Not . I Have Always Power Problem In My Home That's Why i Need Battery For My TL-MR3420... Any One Guide Me .. Any Hardware Diagram For It .. i'm Android Dev And hardware Eng .. If U Provide Me Hardware Diagram Or Any Other Info i Will Add External Battery In It ...
Region : Poland
Model : TL-MR3040
Hardware Version : V1
Firmware Version : recent
ISP :
I have a tplink mr-3040 modem to use as repeater for my travels in hotels and after 2 monts I was not able to make it to work any time.Whenever I try with WEP, WPA or OPEN - like today - it's always the same problem: I can see repeated network with strong signal, but when I want to connect using laptop or phone connection stop on level of "getting IP address" and never end with final time-out.
Region : Italy
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Vodafone IT
Basically, the 3g port is absolutely not working in both devices.I've tried with 4 usb 3g adapter (all huawei and listed under compatible), THEN i bought a MA180 (yes, the TP-LINK 3g usb stick) and even this is not working.The MR3040 if i connect the MA180 simply will blink the MR3040 3g led ONCE, after that it simply does nothing.if i go under the status page on 192.168.0.1 it basically says:"3g usb: Identifying.." and it still stops there for even an hour.Same on the MR3020.
Region : Spain
Model : TL-MR3040
Hardware Version : V1
Firmware Version :
ISP : Movistar
I can connect easily to internet with TP-Link MR-3040 router and Huawei E173 3G modem, but the router is disconnected or reseted after a while with no reason. it works fine between 5 and 15 minutes, rarely more than 1 hour, and when i see a video or download a large file the reset is almost automatic. This never happens with the Huawei modem connected directly to the PC!
Region : Others
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.12.11 Build 120328 Rel.63398n
ISP : CityCell Zoom (in Bangladesh)
I bought a MR3040 Router & I have a ZTE AC682 (EVDO) Modem. I found my modem's model in Modem Compatibility List (Other Country, Indonesia & Singapore).
1st time The router showing Unknown Modem.
Then I tried with .bin file upgrade. The Router Showing Identifying .... Then I tried with firmware Upgrade. But Still Showing Identifying ....
My Systems Log as below
code...
Region : Spain
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 3.12.11 Build 120328 Rel.63398n
ISP : SPAIN MOVISTAR
My TL-MR3040 router identifies correctly my ZTE MF 110 HUSPA USB MODEM but it doesn't connect to my ISP Movistar in Spain This is the Log of the router:
Log Content
before switch modem vid is 0x19d2 pid is 0x0083
Device vendorID: 0x19d2; productID: 0x0083
handle_card start
mobileCmdReq 328 mobileFormatCmd error
[code]....
Region : Others
Model : TL-MR3040
Hardware Version : V2
Firmware Version : 3.14.4. Build 121017 Rel 62268n
ISP : CellC
I bought the MR3040 to use only with battery but now my if used with 3G stick E1752 it reboots. If I use a powered hub then it works.
I thought this devive was a mobile device, now it seems I need external power.
Region : UnitedKingdom
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.14.2 Build 120822 Rel 40902n
ISP : Three UK
I purchased a TPLink MA180 dongle to go with my TPLink MR3040 mobile router in the hope that by buying both components from the same manufacturer would avoid any compatibility issues; however despite many hours of trying I've not been able to get these two devices to work together. When I attach the MA180 dongle to the router, the status says that its "connecting", but it never connects (also the light on the dongle flashes to indicate its connecting, and doesn't stay green). Each of the components works independantly, for example if I plug the MA180 dongle into my laptop it connects to the 3G network ok, and if I connect the MR3040 to an ethernet it operates as a wireless router ok - but they don't seem to work together.I've upgraded the MR3040 firmware to the latest release, and reset everything back to the default settings to no avail. When running the quick setup wizard, the router correctly discovers that my mobile ISP is 3 UK, and automatically sets the dial number and APN for this network. I've also tried it with SIM card from a different mobile ISP (Virgin Mobile) and got exactly the same problem.
Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Celcom
There is a website that does not load when the router is in a certain setting. The website I tried to access was url...I have tried the different firmwares and settings and have narrowed it down to the AES encryption.Have tried the original 120328 firmware, works perfectly with all different settings.With the 120822 firmware, it works with all settings EXCEPT when AES is chosen as the encryption method, be it using WPA or WPA2 Personal.
I therefore pinpoint the AES encryption mode in the 120822 firmware to have a bug. I need to use 802.1n with AES, rather than TKIP.Can someone else using 120822, with AES encryption for wireless, verify that this is happening for them too?
Region : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Idea 3G
I am using TP Link 3040 V1 and whenever I am using it with my IDEA 3G dongle model no E1732 it keep on getting disconnected after 15-20 mins.
When i restart the router again it works fine for another 15-20 mins and then again disconnects.
When I use the dongle directly in my laptop it works fine without disconnecting. So the issue is not in the Idea dongle but in the router.
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : India
Model : TL-MR3040
Hardware Version : V2
Firmware Version : 3.14.2 Build 120822 Rel.40902n
ISP : Reliance
Configuring my TL_Mr3040 with Huwei EC 150 model USB modem, the modem and ISP name is there in the list , I have configured all (manual/ as well as auto ) methods of authentication as mentioned in user guide.
for more infor , the exported profile from laptop where my modem works fine is
<?xml version="1.0" encoding="utf-8"?>
<utpsdoc type="Profile">
<ProfileGroup type="DialUp">
<Profile name="Reliance" type="" readonly="" device="" user="74831*****" password="74831*****" phonenumber="#777" autoapn="true" apn="" chap="true" pap="false" ip="" dns="" dnsalt="" wins="" winsalt="" imsi="" langid=""/>
</ProfileGroup>
</utpsdoc>
Region : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3G/3.75G
ISP : MTS
I have bought a wifi usb router 3040 version 1 i.e. 3G/3.75G. The shopkeeper is saying, he doesn't have version 2 i.e. 3G/4G.He is saying we can upgrade version 1 to 2 i.e. 4G.Is the hardware of version 1 and 2 are same?Should I return this?
Region : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version :
ISP :
I have a MR3040 and purchased a Huawei E303C data card. After an initial hickup in configuring it the Data card although not on the compatibility list works excellently with the MR3040.
Region : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.14.2 Build 120822 Rel.40902n
ISP : Airtel
I have just bought the MR3040. I am using this in India with local ISP Airtel and ZTE MF 880T LTE modem, which normally gives 4G connection when connected directly to the laptop.I have used the normal settings as guided by TP link and checked that dialing properties are all fine. When I am connecting through the MR3040, the blue light is visible in the modem but there is NO internet throughput, the internet icon in the router also remains OFF.
Region : Belgium
Model : TL-MR3040
Hardware Version : V1
Firmware Version : factory default / most recent update
ISP : Mobile Vikings
I was configuring a device for one of our customers, but when I was setting up the MR3040's internet connection settings things went haywire.there's only a default selection for two of my country's providers. No biggy you'd think.
Region : Egypt
Model : TL-MR3040
Hardware Version : V2
Firmware Version :
ISP : etisalat
i'm just starting setting-up my mr3040 device i entered the address 192.168.0.1 as recommended but the browser fails to connect
message: website (192.168.0.1) is online but isn't responding to connection
Region : Argentina
Model : TL-MR3040
Hardware Version : V2
Firmware Version : 2
ISP : Vodafone
I received the device today from Amazon UK. The device fails to connect with my Vodafone Huawei K3770. I have tried various things including selecting PAYG and Contract, tried manual settings. Also in Modem Settings there were no modems, hence installed a version of the K3770 for TP-MR3020.
Though the device is expected to work with K3770 (as stated on various sites) there seems to be no modem bin file provided on the TP Link site.
Region : UnitedStates
Model : TL-MR3040
Hardware Version : V1
Firmware Version : latest
ISP : Freedompop / Clear
How to get this router running with wimax usb from either Freedompop, Virgin, Clear , or Sprint?
Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : MAXIS
I've got an issue with my TL-MR3040. Need assistance.- Modem HuaweiE398 (Identified) and connected to internet as seen on the webgui. Connected to my TL-MR3040 via wireless and connected BUT no internet access to the web.Tested using RJ45 cable to direct connect PC to Router, NO ISSUE with internet access to web.Need to know is my TL-MR3040 got defects or faulty?
Region : Portugal
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Optimus Kanguru (LTE) www.kanguru.pt
I have a modem huawei E392u-12 from the service provider optimus kanguru, url..., and i would like to use my usb modem with this router i have. the router identify the modem but does not conect. i have seen that the bin files available are just for vodafone and TMN, what can i do so i dont have to buy another equipment.
Region : Others
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.12.11 Build 120328 Rel.63398n
ISP : Qubee or Banglalion wimax (in Bangladesh)
Any 4g/wimax usb modem compability list for mr 3040 routre?
Region : australia
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : Australia
Model : TL-MR3040
Hardware Version : Not Clear
Firmware Version :
ISP :
does any one know if the new sierra 320u 4g bigpond modem will work with the tl-mr3040 battery wifi router, and does it handle the 100mbs speed, also how relyable are these routers, and what is its range.
Region : Others
Model : TL-MR3040
Firmware Version: 3.14.4 Build 121017 Rel.62268n
I have purchased TL-MR3040 especial for share my 3G account . I have connect it by ethernet port and made setups and it is in 3g/4g only mode. In system checks my modem indicated as " Identified" the modem is a Huawei E160E . My notebook and tablet connects by wireless connection to TL-MR3040 but the router does not dial ISP number *99# . The led on usb modem continues flashing. the 3G modem works perfectly with my notebook and tablet and I use the same parameters for TL-MR3040 with tablet. But most of the parameters don't exist on setup pages of TL-MR3040 . [code]
Region : US
Model : TL-MR3040
Hardware Version : V1.0
Firmware Version : 3.12.11 build 120328 ref. 63398
i just got a new TP Link TL-MR3040 V1.0.While setting up the router page on wireless and saw the firmware is an old version 3.12.11 build 120328 ref. 63398.Did a check on the TP link site and there is a new firmware update TL-MR3040_V1_120822.I have downloaded the new firmware but dont know how to do it. Read the confusing "how to guide ......" but was stated "Do NOT upgrade the firmware via wireless connection"
Question : how to connect with LAN wire ? Try plugging btw the computer LAN and the router LAN.... can't access the 192.168.0.1
Question : any proper step-by-step guide on how to update the firmware?
Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_v1_120822
ISP : Maxis
Using the MR-3040 with the MA180 on Maxis network?The connection seems to come up, it will be usable for awhile and then after that Internet access is not available. Looking at the Status page on the MR-3040 it says 3G is connected. Doing a Diagnostic ping, nothing is reachable.
Region : India
Model : TL-MR3040
Hardware Version : V1
Firmware Version : 3.14.2 Build 120822 Rel.40902n
ISP : Aircel (chennai, India)
Recently I bought a TP-Link 3G portable battery powered router ( model no: TL-MR3040).After connecting I get this status: please see picture ( file name 1)
1.jpg: My problems are: I cant find Aircel Network provider(Chennai , India) in the Mobile ISP list, As you can see the second picture below I can see all network providers except Aircel Network Provider : Please see the picture 2 ( file name is 2)
2.jpg and frequently disconnecting and very very poor Wireless coverage (less than 10 feet) I have sent many mails to TP-Link technical support team. I didnt get a single reply from them.
I've got a Samsung Epic 4G and whenever I leave the wifi connected on my phone at home, it seems to never go into sleep so the battery drains overnight doing nothing. If I turn off wifi and leave it on the 3G network, battery barely drains at all. Is there something in my router that could be keeping my phone awake when it's connected. I've tested it on a friends wifi network and my phone sleeps just fine, it's only when I'm connected to my DIR-655.
View 12 Replies View RelatedSo I have an WRVS4400N V2 and just got a new laptop with an Intel 6230 Wifi card in it and have an odd problem.While the laptop is on battery power the network gets massive packet loss.
I don't know what to do.Laptop manufacture says its AP but AP worked fine with old laptop and works fine when laptop is on power and all other devices seem to be fine with the exception of my Xbox 360 that wont connect if I have it on WPA2 but I will post another thread for that.
Why do I have to keep my laptop power cord plugged in in order to not lose an internet connection? I configured settings for maximum performance in both the adapter configurations and advanced power settings.Could it have some thing to do with my wireless router?I don't experience this problem at wi-fi hotspots.
View 3 Replies View RelatedThe issue im having is that i have recently had no issue with the wireless network. But today my laptops battery would not charge and as a result the computer died. I had to remove it to get it to charge again. Since then i have been unable to connect wirelessly to the network it simply says "windows is unable to connect" I have however been able to get online using an ethernet cable on the same router.ive looked around on varius forms but no information has assisted thus far.
View 17 Replies View Related
